skbernard Posted May 14, 2015 Share Posted May 14, 2015 omg omg omg om gom gomgom gom gomg omg ggmomgm I"M AT WORK!!!- - - Updated - - -Kospy, dumb question. But at work so can't research much. Wording about KIS is a little confusing. Is KIS as a standalone not needed as it is integrated into KAS?KAS is basically only a parts pack - KIS has all the functionality Link to comment Share on other sites More sharing options...
HighSpeedSteel Posted May 14, 2015 Share Posted May 14, 2015 (edited) I am unable to attach HE-03 Electro-magnet to Winch RW-50 in VAB. The green balls just ignore each other. Same problem with Grappling hook, Harpoon and Anchor.The IW-50 Winch (the bigger one) works with all attachments (hook, anchor, harpoon, electromagnet)Am I doing anything wrong?KAS 5.0, KIS 1.1.4EDIT: I am always slower than you guys.. Fix posted by KospY on previous page (KAS config error, he'll fix it ) Edited May 14, 2015 by HighSpeedSteel Link to comment Share on other sites More sharing options...
hbkmog Posted May 14, 2015 Share Posted May 14, 2015 Yeah, to avoid confusion and further complication, why aren't KAS and KIS integrated together? I know KIS actually separated from KAS but they pretty much depend on each other to have the full functionality. Link to comment Share on other sites More sharing options...
arachnidan Posted May 14, 2015 Share Posted May 14, 2015 Last train to Hype City leaving town. Link to comment Share on other sites More sharing options...
UAL002 Posted May 14, 2015 Share Posted May 14, 2015 KAS is basically only a parts pack - KIS has all the functionalitySo you still need both then. Link to comment Share on other sites More sharing options...
Fyrem Posted May 14, 2015 Share Posted May 14, 2015 Thank you ! DLing now! Link to comment Share on other sites More sharing options...
BigD145 Posted May 14, 2015 Share Posted May 14, 2015 Woot! Link to comment Share on other sites More sharing options...
42_aerobrake_passes Posted May 14, 2015 Share Posted May 14, 2015 New part : harpoonAnyone else tempted to rename a kerbal to Ahab Kerman and go hunting for the white kraken with this part? Link to comment Share on other sites More sharing options...
smjjames Posted May 14, 2015 Share Posted May 14, 2015 Anyone else tempted to rename a kerbal to Ahab Kerman and go hunting for the white kraken with this part?lol!Anyways, awesomeness! - - - Updated - - -Now it's 0.5.1, I wonder what got hotfixed. And according to curse, it got released not even 10 minutes ago. Link to comment Share on other sites More sharing options...
KospY Posted May 14, 2015 Author Share Posted May 14, 2015 KAS 0.5.1 released !Just a small fix about the first main issues.Changelog : - Added a warning if KIS is not detected- Fixed radial winch not allowing stack attachThanks for your fast feedback Link to comment Share on other sites More sharing options...
Andy81le Posted May 14, 2015 Share Posted May 14, 2015 I am having trouble when loading into KSP: It gets stuck on loading KAS/parts/cport1/part/KAS_Port1Anyone know why this is (Modded install)? Link to comment Share on other sites More sharing options...
Grumman Posted May 14, 2015 Share Posted May 14, 2015 Anyone else tempted to rename a kerbal to Ahab Kerman and go hunting for the white kraken with this part?I was actually already using harpoons in the previous version, built out of a radial decoupler with two Separatrons and a grappling claw on the front. I'm guessing the pre-built one is more accurate, though. Link to comment Share on other sites More sharing options...
smjjames Posted May 14, 2015 Share Posted May 14, 2015 I am having trouble when loading into KSP: It gets stuck on loading KAS/parts/cport1/part/KAS_Port1Anyone know why this is (Modded install)?Do you have ATM or did you DDSify anything? Link to comment Share on other sites More sharing options...
Woodstar Posted May 14, 2015 Share Posted May 14, 2015 Kospy, dumb question. But at work so can't research much. Wording about KIS is a little confusing. Is KIS as a standalone not needed as it is integrated into KAS?No you will need KIS for KAS to work properly. Link to comment Share on other sites More sharing options...
Lumaro Posted May 14, 2015 Share Posted May 14, 2015 I am having trouble when loading into KSP: It gets stuck on loading KAS/parts/cport1/part/KAS_Port1Anyone know why this is (Modded install)?I'm having the same exact issue. I'm not using ATM, I feel like it scales down all of my textures and makes them muddy. Link to comment Share on other sites More sharing options...
Woodstar Posted May 14, 2015 Share Posted May 14, 2015 Do you have ATM or did you DDSify anything?Not too sure that's his problem, I have ATM installed and DDSified everything and it is running fine. Link to comment Share on other sites More sharing options...
smjjames Posted May 14, 2015 Share Posted May 14, 2015 I am having trouble when loading into KSP: It gets stuck on loading KAS/parts/cport1/part/KAS_Port1Anyone know why this is (Modded install)?I'm having the same exact issue.Uh, screenshots of your gamedata folder? I didn't have any issues.Not too sure that's his problem, I have ATM installed and DDSified everything and it is running fine.Hm... Well, it was my first thought. Link to comment Share on other sites More sharing options...
Andy81le Posted May 14, 2015 Share Posted May 14, 2015 (edited) Do you have ATM or did you DDSify anything?Yes, I have the agressive version. But I also tried it with KAS deactivated through a config for ATM and without ATM. Still the same problem. My KAS version is the most recent one from about half-an-hour ago.Edit: Screenshot of my gamedata folder http://imgur.com/VAoUN97 Edited May 14, 2015 by Andy81le Link to comment Share on other sites More sharing options...
Lumaro Posted May 14, 2015 Share Posted May 14, 2015 Sorry, I've got so many mods. Link to comment Share on other sites More sharing options...
coldblade2000 Posted May 14, 2015 Share Posted May 14, 2015 (edited) Also have the CPort1 issue. Downloading KIS 1.1.4 (CKAN only has up to 1.1.2) and then I'll try to get the logsEdit: Can confirm that updating to 1.1.4 manually (uninstalling from CKAN and installing from this thread) fixed the CPort1 issue and I have had no other issues Edited May 14, 2015 by coldblade2000 Link to comment Share on other sites More sharing options...
Billman Posted May 14, 2015 Share Posted May 14, 2015 Sorry, I've got so many mods. http://puu.sh/hNnMU/d294a95469.pngI am amazed you have Environmental Visual Enhancements and Distant Object working together. It's usually choose one or the other. And no Active Texture Management? Link to comment Share on other sites More sharing options...
smjjames Posted May 14, 2015 Share Posted May 14, 2015 I know KospY said that modulemanager isn't needed anymore, but try getting the latest MM and see if that helps.Also, The winches aren't really mirroring correctly, but then again, I think it might be a quirk of KSP.I do have the stockbugfixmodules. Link to comment Share on other sites More sharing options...
Andy81le Posted May 14, 2015 Share Posted May 14, 2015 Also have the CPort1 issue. Downloading KIS 1.1.4 (CKAN only has up to 1.1.2) and then I'll try to get the logsEdit: Can confirm that updating to 1.1.4 manually (uninstalling from CKAN and installing from this thread) fixed the CPort1 issue and I have had no other issuesI also confirm that this was the issue. Why is Ckan so behind? Link to comment Share on other sites More sharing options...
goldenpsp Posted May 14, 2015 Share Posted May 14, 2015 I also confirm that this was the issue. Why is Ckan so behind?Maybe ask the CKAN people. Link to comment Share on other sites More sharing options...
Lumaro Posted May 14, 2015 Share Posted May 14, 2015 I am amazed you have Environmental Visual Enhancements and Distant Object working together. It's usually choose one or the other. And no Active Texture Management?I've got an abundance of RAM.- - - Updated - - -Also have the CPort1 issue. Downloading KIS 1.1.4 (CKAN only has up to 1.1.2) and then I'll try to get the logsEdit: Can confirm that updating to 1.1.4 manually (uninstalling from CKAN and installing from this thread) fixed the CPort1 issue and I have had no other issuesI'm using the one from this thread and i'm still having the issue. I will attempt a reinstall of KAS. Link to comment Share on other sites More sharing options...
Recommended Posts