Alewx Posted February 2, 2017 Share Posted February 2, 2017 On 31.01.2017 at 9:37 PM, jmbailey2000 said: Alewx, Odd question......was there any major change between version 2.3.3 and 2.5.0? I ask because under KSP 1.1.3 and the Welding mod 2.3.3, I could weld RCS nozzles and they would work just fine (both functionality and visuals...puffs of mist visible during use). However, under KSP 1.2.2 and Welding 2.5.0 RCS seems to break when welded. You get exactly one action with the welded RCS and then it compeletely stops working and there is no visible puff od mist ever). Only asking because I had a ton of welded modules with RCS and now they no longer work. Just wondering if there was something obvious that you might recall that would have changed to cause this. Thanks! RCS ports to not work properly if welded, it is not recommended to do that. their function will be broken in parts, the transition might work but rotation forces do not. And yes there were some major changes between these versions. 6 hours ago, Helbrecht said: I do have SpaceY but the part in question is a tweaked Orange Jumbo tank. I found that tweakscale doesn't work all that well with the welded mod installed, I have a really nifty payload launch system and it has tweaked parts, and now when I load it up the parts are all default size and the craft collapses on itself, idk if i have to remake the craft after installing the mod or if it breaks tweakscale. Edit: ColorCodedCanisters was to blame for the flickering, going to see if I can find a work around for it since I like having the different color schemes. CCC was not tested so far, will have to investigate how it interferes with the Switch. the Switches are both working and will be integrated into a single module in the partfile. Quote Link to comment Share on other sites More sharing options...
WuphonsReach Posted February 2, 2017 Share Posted February 2, 2017 2 hours ago, Alewx said: RCS ports to not work properly if welded, it is not recommended to do that. their function will be broken in parts, the transition might work but rotation forces do not. In the past (KSP 1.0), I've had no trouble creating 4-way end plates with the linear (single-port) RCS welded around the edge of the plate (pointing in the four cardinal directions). Has that changed? Or is that covered by "the translation might work"? Quote Link to comment Share on other sites More sharing options...
Alewx Posted February 2, 2017 Share Posted February 2, 2017 43 minutes ago, WuphonsReach said: In the past (KSP 1.0), I've had no trouble creating 4-way end plates with the linear (single-port) RCS welded around the edge of the plate (pointing in the four cardinal directions). Has that changed? Or is that covered by "the translation might work"? if you use the RCS in weldments with Q or E it is likely to be wrong/broken. Also I somehow remember that it was said the RCS models/modules would get some improvement, so maybe that is why it is no different than 1.0. Quote Link to comment Share on other sites More sharing options...
Helbrecht Posted February 3, 2017 Share Posted February 3, 2017 (edited) I tried using the 3.5m stock tanks and still have flicker, and it seems to break tweakscale, so I can't use it sadly since so many of my crafts rely on tweaked parts. Edited February 4, 2017 by Helbrecht Quote Link to comment Share on other sites More sharing options...
Helbrecht Posted February 7, 2017 Share Posted February 7, 2017 Also it seems to have broken Hangar Extender, I haven't added anymore mods since installing Welding, so I am assuming its playing a part in it. Quote Link to comment Share on other sites More sharing options...
Alewx Posted February 15, 2017 Share Posted February 15, 2017 On 07.02.2017 at 8:57 AM, Helbrecht said: Also it seems to have broken Hangar Extender, I haven't added anymore mods since installing Welding, so I am assuming its playing a part in it. No log no help.... Especially as both mods have nothing to do with each other. Quote Link to comment Share on other sites More sharing options...
Guest Posted February 15, 2017 Share Posted February 15, 2017 This is an amazing mod, thanks a lot!!! But the "strength params calculation method" in the welding settings is a little bit confusing to me. By using the "Legacy" option, I welded two 2.5m RCS tanks together, and found that the breakingForce and breaking Torque in the .cfg all raised from 22 to 33 compared to single 2.5m RCS tank(22 is default), while using the "average" option I get 22. So will this change affect the strength calculation of Kerbal Joint Reinforcement? Thanks again! Quote Link to comment Share on other sites More sharing options...
Alewx Posted February 16, 2017 Share Posted February 16, 2017 19 hours ago, whwraul7 said: This is an amazing mod, thanks a lot!!! But the "strength params calculation method" in the welding settings is a little bit confusing to me. By using the "Legacy" option, I welded two 2.5m RCS tanks together, and found that the breakingForce and breaking Torque in the .cfg all raised from 22 to 33 compared to single 2.5m RCS tank(22 is default), while using the "average" option I get 22. So will this change affect the strength calculation of Kerbal Joint Reinforcement? Thanks again! Nope that are actually two different pairs of shoes. The breakingForce and breakingTorque are the values that define the requirement for the part to be destroyed and get removed from the world. The value for the joints is only handled by KJR, but welding will merge the welded parts into one new single part so that it might look like it would have stronger joint forces but there are no joints as it is just a single part. Quote Link to comment Share on other sites More sharing options...
Guest Posted February 16, 2017 Share Posted February 16, 2017 21 minutes ago, Alewx said: Nope that are actually two different pairs of shoes. The breakingForce and breakingTorque are the values that define the requirement for the part to be destroyed and get removed from the world. The value for the joints is only handled by KJR, but welding will merge the welded parts into one new single part so that it might look like it would have stronger joint forces but there are no joints as it is just a single part. Got that, thanks for the answer! Quote Link to comment Share on other sites More sharing options...
Bluebottle Posted February 17, 2017 Share Posted February 17, 2017 (edited) Hi again Alewx. I've seen another unityException when loading a welded part in the editor: Spoiler [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added Transform = MarkIVSystem/Parts/Fuselage/mk4fuselage-3(Clone) from index 0 to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformBasic to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformCollider01 to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformCollider02 to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformCollider03 to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformFuselageShortLFO to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformPoint001 to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformSky001 to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformTankLFO to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added Transform = MarkIVSystem/Parts/Fuselage/mk4cargo-1(Clone) from index 1 to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find Transform Basic to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformCargoDoor001 to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformCargoDoor002 to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformCargoExternal to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformCargoInternal to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformCollider01 to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformCollider02 to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformColliderFloor to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformColliderFloor002 to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformColliderFloor003 to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformPiston01Lower to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformPiston02Lower to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformSky001 to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformTankLFO to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added Transform = Squad/Parts/FuelTank/mk3Fuselage/LFO_100(Clone) from index 2 to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find Transform LFO_10m to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformMk3COL to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added Transform = B9_Aerospace/Parts/Aero_HL_Body/8m-Universal-Tail(Clone) from index 3 to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find Transform Tail_Lowered to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added Transform = Squad/Parts/FuelTank/mk2FuselageLong/FuselageLongLFO(Clone) from index 4 to list [ERR 15:17:31.784] Module WeldedMeshSwitch threw during OnStart: UnityEngine.UnityException: Transform child out of bounds at (wrapper managed-to-native) UnityEngine.Transform:GetChild (int) at UbioWeldingLtd.WeldedMeshSwitch.parseTranseforms () [0x00000] in <filename unknown>:0 at UbioWeldingLtd.WeldedMeshSwitch.initModule () [0x00000] in <filename unknown>:0 at UbioWeldingLtd.WeldedMeshSwitch.OnStart (StartState state) [0x00000] in <filename unknown>:0 at Part.ModulesOnStart () [0x00000] in <filename unknown>:0 [LOG 15:17:31.830] [Part KSS-Eos-chassis-v2-1] [ModuleB9PartSwitch 'fuelSwitch'] Switched subtype to LF/O Could it be due to the cloning (via symmetry) of some parts? I notice that the previous part was a B9 part that gives me mesh problems - you know, the normal Z-fighting when all its meshes are loaded. I'm currently experimenting with adding more mesh selection to the WeldedMeshSwitch section of the part config. I love WeldedMeshSwitch - with so many parts using multiple meshes these days, it's vital! Edit: I've found what it was. Welding these parts: Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant Squad/Parts/FuelTank/mk2FuselageLong/FuselageLongLFO added empty mesh/collider lists into the WeldedMeshSwitch configuration. So It looked like this: objectIndicies = 0; 16; 17; 19; 20; 21; 23; 25; 27; 28; 29; 31; 33; 34 objects = Basic,Collider01,Collider02,Collider03,FuselageShortLFO,Point001,Sky001,TankLFO; Basic,CargoDoor001,CargoDoor002,CargoExternal,CargoInternal,Collider01,Collider02,ColliderFloor,ColliderFloor002,ColliderFloor003,Piston01Lower,Piston02Lower,Sky001,TankLFO; LFO_10m,Mk3COL; Tail_Lowered; ; StandardWing; ; LFO_10m,Mk3COL; Tail_Lowered; ; StandardWing; ; Basic,Collider01,Collider02,Collider03,FuselageShortLFO,Point001,Sky001,TankLFO; Adapter,Basic,Collider01,Collider1,Collider02,Collider2,Iguana,Sky001,TankRCS Those "; ;" sections were causing the problem. Everything worked after I removed those empty lists, and the corresponding part index from objectIndicies. Edited February 17, 2017 by Bluebottle Quote Link to comment Share on other sites More sharing options...
Alewx Posted February 20, 2017 Share Posted February 20, 2017 On 17.02.2017 at 4:04 AM, Bluebottle said: Hi again Alewx. I've seen another unityException when loading a welded part in the editor: Reveal hidden contents [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added Transform = MarkIVSystem/Parts/Fuselage/mk4fuselage-3(Clone) from index 0 to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformBasic to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformCollider01 to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformCollider02 to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformCollider03 to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformFuselageShortLFO to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformPoint001 to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformSky001 to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformTankLFO to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added Transform = MarkIVSystem/Parts/Fuselage/mk4cargo-1(Clone) from index 1 to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find Transform Basic to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformCargoDoor001 to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformCargoDoor002 to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformCargoExternal to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformCargoInternal to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformCollider01 to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformCollider02 to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformColliderFloor to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformColliderFloor002 to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformColliderFloor003 to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformPiston01Lower to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformPiston02Lower to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformSky001 to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformTankLFO to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added Transform = Squad/Parts/FuelTank/mk3Fuselage/LFO_100(Clone) from index 2 to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find Transform LFO_10m to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find TransformMk3COL to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added Transform = B9_Aerospace/Parts/Aero_HL_Body/8m-Universal-Tail(Clone) from index 3 to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added find Transform Tail_Lowered to list [LOG 15:17:31.784] [WeldingTool] [WeldedMeshSwitch] added Transform = Squad/Parts/FuelTank/mk2FuselageLong/FuselageLongLFO(Clone) from index 4 to list [ERR 15:17:31.784] Module WeldedMeshSwitch threw during OnStart: UnityEngine.UnityException: Transform child out of bounds at (wrapper managed-to-native) UnityEngine.Transform:GetChild (int) at UbioWeldingLtd.WeldedMeshSwitch.parseTranseforms () [0x00000] in <filename unknown>:0 at UbioWeldingLtd.WeldedMeshSwitch.initModule () [0x00000] in <filename unknown>:0 at UbioWeldingLtd.WeldedMeshSwitch.OnStart (StartState state) [0x00000] in <filename unknown>:0 at Part.ModulesOnStart () [0x00000] in <filename unknown>:0 [LOG 15:17:31.830] [Part KSS-Eos-chassis-v2-1] [ModuleB9PartSwitch 'fuelSwitch'] Switched subtype to LF/O Could it be due to the cloning (via symmetry) of some parts? I notice that the previous part was a B9 part that gives me mesh problems - you know, the normal Z-fighting when all its meshes are loaded. I'm currently experimenting with adding more mesh selection to the WeldedMeshSwitch section of the part config. I love WeldedMeshSwitch - with so many parts using multiple meshes these days, it's vital! Edit: I've found what it was. Welding these parts: Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant Squad/Parts/FuelTank/mk2FuselageLong/FuselageLongLFO added empty mesh/collider lists into the WeldedMeshSwitch configuration. So It looked like this: objectIndicies = 0; 16; 17; 19; 20; 21; 23; 25; 27; 28; 29; 31; 33; 34 objects = Basic,Collider01,Collider02,Collider03,FuselageShortLFO,Point001,Sky001,TankLFO; Basic,CargoDoor001,CargoDoor002,CargoExternal,CargoInternal,Collider01,Collider02,ColliderFloor,ColliderFloor002,ColliderFloor003,Piston01Lower,Piston02Lower,Sky001,TankLFO; LFO_10m,Mk3COL; Tail_Lowered; ; StandardWing; ; LFO_10m,Mk3COL; Tail_Lowered; ; StandardWing; ; Basic,Collider01,Collider02,Collider03,FuselageShortLFO,Point001,Sky001,TankLFO; Adapter,Basic,Collider01,Collider1,Collider02,Collider2,Iguana,Sky001,TankRCS Those "; ;" sections were causing the problem. Everything worked after I removed those empty lists, and the corresponding part index from objectIndicies. Did you update the mod that brought in the parts between the starts of the game? Quote Link to comment Share on other sites More sharing options...
Bluebottle Posted February 20, 2017 Share Posted February 20, 2017 1 hour ago, Alewx said: Did you update the mod that brought in the parts between the starts of the game? No, I didn't. The weldment config file was written with those empty mesh/collider lists in it, and empty lists seem to cause the exception: all mesh switching stops when an empty list is encountered. That's why I was getting the Z-fighting from the B9 parts - all meshes were being used, rather than the right ones being selected by WeldedMeshSwitch. As for why stock Squad parts would cause empty lists to be written to a weldment file, I don't know. Here are all the times that Mk3-Size2Slant occurs in my log file: $ grep Mk3-Size2Slant KSP.log [LOG 20:38:16.198] Load(Model): Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant [LOG 20:38:48.247] Config(@PART[adapterMk3-Size2Slant]:FOR[SETIrebalance]) SETIrebalance/MM-PartModding/SETI-PartMod-SQUAD-FuelTanks/@PART[adapterMk3-Size2Slant]:FOR[SETIrebalance] [LOG 20:38:48.256] Config(PART) Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant [LOG 20:38:48.274] Config(@PART[adapterMk3-Size2Slant]) TweakScale/patches/Squad/Squad_Tanks/@PART[adapterMk3-Size2Slant] [LOG 20:38:55.497] [ModuleManager] Applying node Diazo/AGExt/part/@PART[*] to Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant [LOG 20:38:55.804] [ModuleManager] Applying node Diazo/ModActions/part/@PART[*] to Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant [LOG 20:39:38.448] [ModuleManager] Applying node TweakScale/patches/Squad/Squad_Tanks/@PART[adapterMk3-Size2Slant] to Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant [LOG 20:39:59.548] [ModuleManager] Applying node HotSpot/Patches/HotSpotModule/@PART:FOR[HotSpot] to Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant [LOG 20:40:21.889] [ModuleManager] Applying node SETIrebalance/MM-PartModding/SETI-PartMod-SQUAD-FuelTanks/@PART[adapterMk3-Size2Slant]:FOR[SETIrebalance] to Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant [LOG 20:40:36.626] [ModuleManager] Applying node CryoTanks/Patches/CryoTanksFuelTankSwitcher/@PART[*]:HAS[@RESOURCE[LiquidFuel],@RESOURCE[Oxidizer],!MODULE[ModuleCryoTank],!MODULE[InterstellarFuelSwitch],!MODULE[ModuleEnginesFX],!MODULE[ModuleEngines],!MODULE[FSfuelSwitch],!MODULE[WBIResourceSwitcher]]:FOR[zzz_CryoTanks] to Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant [LOG 20:40:38.998] [ModuleManager] Applying node VenStockRevamp/PathPatches/Aero-PathPatches/@PART[*]:FOR[zzzVSRPathPatch] to Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant [LOG 20:40:41.701] [ModuleManager] Applying node VenStockRevamp/PathPatches/Command-PathPatches/@PART[*]:FOR[zzzVSRPathPatch] to Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant [LOG 20:40:44.442] [ModuleManager] Applying node VenStockRevamp/PathPatches/Electrical-PathPatches/@PART[*]:FOR[zzzVSRPathPatch] to Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant [LOG 20:40:48.323] [ModuleManager] Applying node VenStockRevamp/PathPatches/Engines-PathPatches/@PART[*]:FOR[zzzVSRPathPatch] to Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant [LOG 20:40:53.029] [ModuleManager] Applying node VenStockRevamp/PathPatches/FuelTanks-PathPatches/@PART[*]:FOR[zzzVSRPathPatch] to Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant [LOG 20:40:57.063] [ModuleManager] Applying node VenStockRevamp/PathPatches/Structural-PathPatches/@PART[*]:FOR[zzzVSRPathPatch] to Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant [LOG 20:41:01.953] [ModuleManager] Applying node VenStockRevamp/PathPatches/Utility-PathPatches/@PART[*]:FOR[zzzVSRPathPatch] to Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant [LOG 20:41:07.197] [ModuleManager] Applying node B9PartSwitch/PartInfo/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]]:FOR[zzzzzz-B9PartSwitch] to Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant [LOG 20:41:08.850] [ModuleManager] Applying node Diazo/ModActions/part/@PART[*]:Final to Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant [LOG 20:41:10.136] [ModuleManager] Applying node SETIrebalance/SETI-GeneralSettings/@PART[*]:HAS[#category[FuelTank]|#category[Propulsion]]:FINAL to Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant [LOG 20:43:25.217] PartLoader: Compiling Part 'Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant' [LOG 20:43:25.235] PartLoader: Part 'Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant' has no database record. Creating. [LOG 20:43:25.240] DragCubeSystem: Creating drag cubes for part 'adapterMk3-Size2Slant' None of those hits cause any errors, and the only warning is this, although I get this for many parts: [LOG 20:43:25.217] PartLoader: Compiling Part 'Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant' [WRN 20:43:25.220] PartLoader Warning: Variable LF not found in Part [WRN 20:43:25.220] PartLoader Warning: Variable OX not found in Part [WRN 20:43:25.220] PartLoader Warning: Variable totalCap not found in Part [WRN 20:43:25.220] PartLoader Warning: Variable massOffset not found in Part [WRN 20:43:25.220] PartLoader Warning: Variable costOffset not found in Part I have B9 Part Switch 1.7.1. Ubio Welding is 2.5.0, of course. Quote Link to comment Share on other sites More sharing options...
Alewx Posted February 21, 2017 Share Posted February 21, 2017 21 hours ago, Bluebottle said: No, I didn't. The weldment config file was written with those empty mesh/collider lists in it, and empty lists seem to cause the exception: all mesh switching stops when an empty list is encountered. That's why I was getting the Z-fighting from the B9 parts - all meshes were being used, rather than the right ones being selected by WeldedMeshSwitch. As for why stock Squad parts would cause empty lists to be written to a weldment file, I don't know. Here are all the times that Mk3-Size2Slant occurs in my log file: $ grep Mk3-Size2Slant KSP.log [LOG 20:38:16.198] Load(Model): Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant [LOG 20:38:48.247] Config(@PART[adapterMk3-Size2Slant]:FOR[SETIrebalance]) SETIrebalance/MM-PartModding/SETI-PartMod-SQUAD-FuelTanks/@PART[adapterMk3-Size2Slant]:FOR[SETIrebalance] [LOG 20:38:48.256] Config(PART) Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant [LOG 20:38:48.274] Config(@PART[adapterMk3-Size2Slant]) TweakScale/patches/Squad/Squad_Tanks/@PART[adapterMk3-Size2Slant] [LOG 20:38:55.497] [ModuleManager] Applying node Diazo/AGExt/part/@PART[*] to Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant [LOG 20:38:55.804] [ModuleManager] Applying node Diazo/ModActions/part/@PART[*] to Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant [LOG 20:39:38.448] [ModuleManager] Applying node TweakScale/patches/Squad/Squad_Tanks/@PART[adapterMk3-Size2Slant] to Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant [LOG 20:39:59.548] [ModuleManager] Applying node HotSpot/Patches/HotSpotModule/@PART:FOR[HotSpot] to Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant [LOG 20:40:21.889] [ModuleManager] Applying node SETIrebalance/MM-PartModding/SETI-PartMod-SQUAD-FuelTanks/@PART[adapterMk3-Size2Slant]:FOR[SETIrebalance] to Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant [LOG 20:40:36.626] [ModuleManager] Applying node CryoTanks/Patches/CryoTanksFuelTankSwitcher/@PART[*]:HAS[@RESOURCE[LiquidFuel],@RESOURCE[Oxidizer],!MODULE[ModuleCryoTank],!MODULE[InterstellarFuelSwitch],!MODULE[ModuleEnginesFX],!MODULE[ModuleEngines],!MODULE[FSfuelSwitch],!MODULE[WBIResourceSwitcher]]:FOR[zzz_CryoTanks] to Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant [LOG 20:40:38.998] [ModuleManager] Applying node VenStockRevamp/PathPatches/Aero-PathPatches/@PART[*]:FOR[zzzVSRPathPatch] to Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant [LOG 20:40:41.701] [ModuleManager] Applying node VenStockRevamp/PathPatches/Command-PathPatches/@PART[*]:FOR[zzzVSRPathPatch] to Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant [LOG 20:40:44.442] [ModuleManager] Applying node VenStockRevamp/PathPatches/Electrical-PathPatches/@PART[*]:FOR[zzzVSRPathPatch] to Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant [LOG 20:40:48.323] [ModuleManager] Applying node VenStockRevamp/PathPatches/Engines-PathPatches/@PART[*]:FOR[zzzVSRPathPatch] to Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant [LOG 20:40:53.029] [ModuleManager] Applying node VenStockRevamp/PathPatches/FuelTanks-PathPatches/@PART[*]:FOR[zzzVSRPathPatch] to Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant [LOG 20:40:57.063] [ModuleManager] Applying node VenStockRevamp/PathPatches/Structural-PathPatches/@PART[*]:FOR[zzzVSRPathPatch] to Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant [LOG 20:41:01.953] [ModuleManager] Applying node VenStockRevamp/PathPatches/Utility-PathPatches/@PART[*]:FOR[zzzVSRPathPatch] to Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant [LOG 20:41:07.197] [ModuleManager] Applying node B9PartSwitch/PartInfo/@PART[*]:HAS[@MODULE[ModuleB9PartSwitch]]:FOR[zzzzzz-B9PartSwitch] to Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant [LOG 20:41:08.850] [ModuleManager] Applying node Diazo/ModActions/part/@PART[*]:Final to Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant [LOG 20:41:10.136] [ModuleManager] Applying node SETIrebalance/SETI-GeneralSettings/@PART[*]:HAS[#category[FuelTank]|#category[Propulsion]]:FINAL to Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant [LOG 20:43:25.217] PartLoader: Compiling Part 'Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant' [LOG 20:43:25.235] PartLoader: Part 'Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant' has no database record. Creating. [LOG 20:43:25.240] DragCubeSystem: Creating drag cubes for part 'adapterMk3-Size2Slant' None of those hits cause any errors, and the only warning is this, although I get this for many parts: [LOG 20:43:25.217] PartLoader: Compiling Part 'Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant/adapterMk3-Size2Slant' [WRN 20:43:25.220] PartLoader Warning: Variable LF not found in Part [WRN 20:43:25.220] PartLoader Warning: Variable OX not found in Part [WRN 20:43:25.220] PartLoader Warning: Variable totalCap not found in Part [WRN 20:43:25.220] PartLoader Warning: Variable massOffset not found in Part [WRN 20:43:25.220] PartLoader Warning: Variable costOffset not found in Part I have B9 Part Switch 1.7.1. Ubio Welding is 2.5.0, of course. Can you also provide a list of mods that are installed. This empty list is strange really strange. Quote Link to comment Share on other sites More sharing options...
Bluebottle Posted February 21, 2017 Share Posted February 21, 2017 2 hours ago, Alewx said: Can you also provide a list of mods that are installed No problem but my mod list is crazy! 224 mods, although with a lot of careful management, the game is very stable and I can even play without NRE spam, except from Kopernicus in map view (a known problem on Linux). Spoiler AGExt 2.2 AIESAerospace-Unofficial 1.6.1 (with -continued patches) AllYAll 0.10.2 AnimatedDecouplers v1.3.3 AntennaSleep 1.0.1 ASETAgency 1.0 ASETAvionics 2.0 ASETProps 1.4 AsphaltTiles 1.2 AsphaltTilesWelded 1.2 AstronikiSunflareforScatterer 1.2 AT-Utils v1.4.1 AviationLights v.3.12 B9 1:v6.3.1 B9AerospaceLegacy 1:v6.3.1 B9AnimationModules v1.0.5 B9PartSwitch v1.7.1 B9-props 1:v6.3.1 B9-PWings-Fork 1:0.40.10 BahamutoDynamicsPartsPack v1.2.0 BDAnimationModules 1:v0.6.4.4 BetterBurnTime 1.5.3 BetterScienceLabsContinued 0.1.9 Buffalo 1.2 CameraFocusChanger v1.0.1.0 CapCom 2.5 CargoTransportationSolutions 0.5.1 Ceteras-Suit-Pack 0.4.2 Chatterer 0.9.92 ChopShop 1:0.10.1.2 CommandInventory 1.0.0 CommunityCategoryKit 1.2.2.0 CommunityResourcePack 0.6.6.0 CommunityTechTree 1:3.0.3 ConfigurableContainers-Core 2.4.0.4 ContractConfigurator 1.22.2 ContractConfigurator-CleverSats 1.4 ContractConfigurator-FieldResearch 1.2.0 ContractConfigurator-GrandTours 1:0.1.11 ContractConfigurator-InterplanetaryMountaineer 1.1.2 ContractConfigurator-KerbinSpaceStation 1:3.6 ContractConfigurator-RoverMissionsRedux 0.1.7 ContractConfigurator-UnmannedContracts 0.3.27 ContractParser 5.0 ContractsWindowPlus 7.3 CryoEngines 1:0.4.5 CryoTanks 0.3.4 DarkSideTechnology 0.4.1 DebugStuff 1.4.0.0 DeflatableHeatShield 0.0.1 DeployableEngines 0.3.4 DistantObject v1.8.1 DistantObject-default v1.8.1 DiverseKerbalHeads 1.0 DMagicOrbitalScience 1.3.8 DockingcameraKURSstyle 1:1.2.1.1 DockingPortAlignmentIndicator 6.5.2 DockingPortSoundFX v2.1.12 DockSafe 1.0.2 EasyBoard 1.4 EasyVesselSwitch 1.2.0.0 EditorExtensionsRedux 3.3.11.1 EngineerLevelFixer 0.3.2.0 EngineLighting 1.5 EnvironmentalVisualEnhancements 2:EVE-1.2-2 EVAStruts 3.0 EVATransfer 6.0 ExtendedInfoSciExp 1:1.2.1.1 ExtraPlanetaryLaunchpads 5.6.0.0 FilterExtensions 2.8.1.2 FilterExtensionsDefaultConfig 2.8.1.2 FinalFrontier 1.2.7-3080 FirespitterCore v7.5.1 FirespitterResourcesConfig v7.5.1 FlexibleDocking 4.0 FlightPlan 1.0.1 FuelTanksPlus 1.11 Hangar 3.3.0 HangarExtender 1:v3.4.9 HaystackContinued 0.5.2.1 HeatControl 0.3.4 HexTruss 0.3.2 HideEmptyTechNodes 0.7.4 Historian-expanded 1:v.1.2.7 HotSpot 0.7.2 HyperEdit 1.5.3.0 InfernalRobotics v2.0.5 (trusses only, no plugin or moving parts) InFlightFlagSwitcher 1.1 InterstellarFuelSwitch-Core 2.4.1 KaribouExpeditionRover 0.3.3.0 KAS 0.6.2.0 KerbalAircraftExpansion 3:v2.6.4 KerbalAlarmClock v3.8.4.0 KerbalAtomics 1:0.3.4 KerbalEngineerRedux 1.1.2.8 KerbalFoundriesContinued 2.0.0.2 KerbalInventorySystemNoFun v0.1.2 KerbalJointReinforcement v3.3.1 KerbalLaunchFailure 0.4.2 KerbalPlanetaryBaseSystems v1.4.0 KerbalStats 3.0.1 KerbnetController 2.1 KerbodynePlus 1.0752 KeridianDynamicsVesselAssembly 0.8.2 KIS 1.4.2 Konstruction 0.1.11.0 Kopernicus 2:release-1.2.2-4 KRASH 0.5.22.1 KSP-AVC 1.1.6.2 KspCraftOrganizer 1.4 KSPRescuePodFix 1.0.0.6 KSPWheel 0.9.2.11 KWRocketryRedux 3.1.2 KWRocketryRedux-InstantPwr 3.1.2 LandingHeight 2.1 LithobrakeExplorationTechnologies 0.4 Low_Expectations_Incorporated 0.65 MalemuteRover 0.2.7.0 MarkIVSpaceplaneSystem 2.3.4 MechJeb2 2.6.0.0 MinAmbience 1.2.3 MiniAVC many Mk2Expansion 1:1.7.26 Mk3Expansion 1.3 ModActions 1.5 ModularFlightIntegrator 1.2.3.0 ModularPods 1.0.2B ModularRocketSystem 1.13.1 ModuleManager 2.7.5 Mark One Laboratory Extensions - 1.4.7 MusicMuteContinued 1.1.3 NavHud 1.3.3 NearFutureConstruction 0.7.5 NearFutureElectrical 0.8.4 NearFutureElectrical-Core 0.8.4 NearFutureProps 0.6.1 NearFuturePropulsion 0.8.4 NearFutureSolar 0.7.2 NearFutureSolar-Core 0.7.2 NearFutureSpacecraft 0.6.2 NMSG 2.5 NodeHelper 1.2.2.1 OffStage 0.0.5 OPTSpacePlaneMain 1.9.2 PAPIPluginContinued v0.4.8 PartCommanderCont 0.1.1.1 Pathfinder 1.6.1 PlanetShine 0.2.5.2 PlanetShine-Config-Default 0.2.5.2 PlanetWiki 4 PreciseManeuver 2:2.2.5 ProceduralFairings v3.20 ProgressParser 6.0 Radialstackdecoupler 1.2.1 RandSCapsuledyne 1:1.5.3 RasterPropMonitor 1:v0.28.0 RasterPropMonitor-Core 1:v0.28.0 RCSBuildAid v0.9.1 RealChute v1.4.1.2 RealPlume 2:v10.5.1 RealPlume-StockConfigs v0.11.4 ReentryParticleEffect 1.2a RLAContinued 14.0.1a RoverWheelSounds 2.3 SafeChute v2.1.6 SCANsat v16.11 Scatterer 2:v0.0300 ScienceRelay 3.1 ScienceRolesFinalFrontierRibbonPack 0.5.1 SDHI-ServiceModuleSystem v3.2.3 SDHI-SharedAssets 1.0 SDHI-StrobeOMatic v1.0 SensiblePumpsCont 1.2.1 SETI-BalanceMod 1.2.2.1 SETI-Contracts 1.2.2.0 ShipEffects 1.0.7 SimpleFemaleKerbals 0.1 SimpleLogistics 2.0.1 SmokeScreen 2.7.2.0 SpacetuxSA 0.3.12.1 SpaceXLegs 2.3.2 SpaceY-Expanded 1.3.1 SpaceY-Lifters 1.16 StageRecovery 1.6.8 StandardPropulsionSystems 1.0.5 StationPartsExpansion 0.4.3 STMsFFRibbonPackEnlistedRanks 0.5.1 STMsFFRibbonPackExpeditionRibbons 5.1.1 STMsFFRibbonPackOfficerRanks 0.5.1 STMsFFRibbonPackOperationsRoles 0.5.1 StockalikeMiningExtension 0.95.2 SurfaceExperimentPack v2.1.3 surfacelights 1.3.1.0 SVE-MediumResolution 2:1.1.6 SVE-Scatterer-Config 2:1.1.6 SVT-HighResolution 2.0 TALSphericalToroidalPack 3.12 TDIndustriesRCSandHypergolicengines 1.0 TextureReplacer v2.5.4 ThroughTheEyesOfaKerbal 1.1.0 ToadicusToolsContinued 0.22.0 Toolbar 1.7.13 TotalTime 0.6.5 ToughLove 0.0.1 Trajectories v1.6.6 TransferWindowPlanner v1.6.1.0 TweakScale v2.3.4 UbioWeldContinued 2.5.0 UniversalStorage 1.2.2.0 USI-Core 0.3.8.0 USI-FTT 0.6.7.0 USI-LS 0.5.22.0 USITools 0.8.15.0 VectorRepurposed 1.0 VenStockRevamp 1.9.5 (with kerbas-ad-astra's patch set) VesselMoverContinued 1.5.1.3 WarpShip 0.3.1 (only the three spacedocks, no other parts or plugins) WaterSounds 2.3 WaypointManager 2.6.2 WheelsCollection 1.2 WhoAmI 1.0.2 WildBlueTools 1.11 Workshop 1.1.0 xScience v5.4 As for logs, this is the load of the pre-welding craft: Spoiler [LOG 02:27:15.714] [KSPUpgradePipeline]: KSS Eos v2_1 (welding prep) (1.2.2) is up to date. [LOG 02:27:15.796] WBIConvertibleStorage [FFD9F050][225.9133]: SetupAnimations called. [LOG 02:27:15.796] WBIConvertibleStorage [FFD9F050][225.9133]: Part is not inflatable. [LOG 02:27:15.796] WBIConvertibleStorage [FFD9F050][225.9133]: OnLoad: WBI.Tundra400 MODULE { stagingEnabled = True isDeployed = False shortName = templateName = USILS partMass = 0 capacityFactor = 0.300000012 fillToMaxInEditor = True decalsVisible = False maxStorage = 3000 baseStorage = 400 templateNodes = KONSTRUCTION_TEMPLATE;STORAGE_TEMPLATE currentVolume = 0 isEnabled = True name = WBIConvertibleStorage EVENTS { } ACTIONS { DumpResourcesAction { actionGroup = None } } RESOURCE { flowMode = Both isVisible = True hideFlow = False isTweakable = True flowState = True maxAmount = 810.00003218650818 amount = 810.00003218650818 name = Supplies } RESOURCE { flowMode = Both isVisible = True hideFlow = False isTweakable = True flowState = True maxAmount = 300.00001192092896 amount = 0 name = Mulch } RESOURCE { flowMode = Both isVisible = True hideFlow = False isTweakable = True flowState = True maxAmount = 570.00002264976501 amount = 570.00002264976501 name = Fertilizer } UPGRADESAPPLIED { } } Scene: EDITOR [LOG 02:27:15.827] WBIConvertibleStorage [FFD9EFEC][225.9133]: SetupAnimations called. [LOG 02:27:15.827] WBIConvertibleStorage [FFD9EFEC][225.9133]: Part is not inflatable. [LOG 02:27:15.827] WBIConvertibleStorage [FFD9EFEC][225.9133]: OnLoad: WBI.Tundra400 MODULE { stagingEnabled = True isDeployed = False shortName = templateName = USILS partMass = 0 capacityFactor = 0.300000012 fillToMaxInEditor = True decalsVisible = False maxStorage = 3000 baseStorage = 400 templateNodes = KONSTRUCTION_TEMPLATE;STORAGE_TEMPLATE currentVolume = 0 isEnabled = True name = WBIConvertibleStorage EVENTS { } ACTIONS { DumpResourcesAction { actionGroup = None } } RESOURCE { flowMode = Both isVisible = True hideFlow = False isTweakable = True flowState = True maxAmount = 810.00003218650818 amount = 810.00003218650818 name = Supplies } RESOURCE { flowMode = Both isVisible = True hideFlow = False isTweakable = True flowState = True maxAmount = 300.00001192092896 amount = 0 name = Mulch } RESOURCE { flowMode = Both isVisible = True hideFlow = False isTweakable = True flowState = True maxAmount = 570.00002264976501 amount = 570.00002264976501 name = Fertilizer } UPGRADESAPPLIED { } } Scene: EDITOR [LOG 02:27:15.854] WBIConvertibleStorage [FFD9EFB6][225.9133]: SetupAnimations called. [LOG 02:27:15.854] WBIConvertibleStorage [FFD9EFB6][225.9133]: Part is not inflatable. [LOG 02:27:15.855] WBIConvertibleStorage [FFD9EFB6][225.9133]: OnLoad: WBI.Tundra400 MODULE { stagingEnabled = True isDeployed = False shortName = templateName = USILS partMass = 0 capacityFactor = 0.300000012 fillToMaxInEditor = True decalsVisible = False maxStorage = 3000 baseStorage = 400 templateNodes = KONSTRUCTION_TEMPLATE;STORAGE_TEMPLATE currentVolume = 0 isEnabled = True name = WBIConvertibleStorage EVENTS { } ACTIONS { DumpResourcesAction { actionGroup = None } } RESOURCE { flowMode = Both isVisible = True hideFlow = False isTweakable = True flowState = True maxAmount = 810.00003218650818 amount = 810.00003218650818 name = Supplies } RESOURCE { flowMode = Both isVisible = True hideFlow = False isTweakable = True flowState = True maxAmount = 300.00001192092896 amount = 0 name = Mulch } RESOURCE { flowMode = Both isVisible = True hideFlow = False isTweakable = True flowState = True maxAmount = 570.00002264976501 amount = 570.00002264976501 name = Fertilizer } UPGRADESAPPLIED { } } Scene: EDITOR [WRN 02:27:15.922] [Part]: PartModule indexing mismatch at B9.Aero.HL.Body.Tail.8m, index 1. Node 'ModuleAGX' found in loaded data, but 'ModuleB9PartSwitch' is defined in prefab. Looking for ModuleAGX in other indices... [WRN 02:27:15.922] ...ModuleAGX module found at index 2. [WRN 02:27:15.922] [Part]: PartModule indexing mismatch at B9.Aero.HL.Body.Tail.8m, index 2. Node 'ModuleModActions' found in loaded data, but 'ModuleAGX' is defined in prefab. Looking for ModuleModActions in other indices... [WRN 02:27:15.922] ...ModuleModActions module found at index 3. [WRN 02:27:15.922] [Part]: PartModule indexing mismatch at B9.Aero.HL.Body.Tail.8m, index 3. Node 'TweakScale' found in loaded data, but 'ModuleModActions' is defined in prefab. Looking for TweakScale in other indices... [WRN 02:27:15.922] ...TweakScale module found at index 4. [WRN 02:27:15.922] [Part]: PartModule indexing mismatch at B9.Aero.HL.Body.Tail.8m, index 4. Node 'HotSpotModule' found in loaded data, but 'TweakScale' is defined in prefab. Looking for HotSpotModule in other indices... [WRN 02:27:15.922] ...HotSpotModule module found at index 6. [WRN 02:27:15.922] [Part]: PartModule indexing mismatch at B9.Aero.HL.Body.Tail.8m, index 5. Node 'ModuleB9PartInfo' found in loaded data, but 'ModuleCryoTank' is defined in prefab. Looking for ModuleB9PartInfo in other indices... [WRN 02:27:15.922] ...ModuleB9PartInfo module found at index 7. [WRN 02:27:15.922] [Part]: PartModule indexing mismatch at B9.Aero.HL.Body.Tail.8m, index 6. Node 'ModuleFuelCrossfeedActions2' found in loaded data, but 'HotSpotModule' is defined in prefab. Looking for ModuleFuelCrossfeedActions2 in other indices... [WRN 02:27:15.922] ...ModuleFuelCrossfeedActions2 module found at index 8. [WRN 02:27:15.956] [Part]: PartModule indexing mismatch at B9.Aero.HL.Body.Tail.8m, index 1. Node 'ModuleAGX' found in loaded data, but 'ModuleB9PartSwitch' is defined in prefab. Looking for ModuleAGX in other indices... [WRN 02:27:15.956] ...ModuleAGX module found at index 2. [WRN 02:27:15.956] [Part]: PartModule indexing mismatch at B9.Aero.HL.Body.Tail.8m, index 2. Node 'ModuleModActions' found in loaded data, but 'ModuleAGX' is defined in prefab. Looking for ModuleModActions in other indices... [WRN 02:27:15.956] ...ModuleModActions module found at index 3. [WRN 02:27:15.956] [Part]: PartModule indexing mismatch at B9.Aero.HL.Body.Tail.8m, index 3. Node 'TweakScale' found in loaded data, but 'ModuleModActions' is defined in prefab. Looking for TweakScale in other indices... [WRN 02:27:15.956] ...TweakScale module found at index 4. [WRN 02:27:15.957] [Part]: PartModule indexing mismatch at B9.Aero.HL.Body.Tail.8m, index 4. Node 'HotSpotModule' found in loaded data, but 'TweakScale' is defined in prefab. Looking for HotSpotModule in other indices... [WRN 02:27:15.957] ...HotSpotModule module found at index 6. [WRN 02:27:15.957] [Part]: PartModule indexing mismatch at B9.Aero.HL.Body.Tail.8m, index 5. Node 'ModuleB9PartInfo' found in loaded data, but 'ModuleCryoTank' is defined in prefab. Looking for ModuleB9PartInfo in other indices... [WRN 02:27:15.957] ...ModuleB9PartInfo module found at index 7. [WRN 02:27:15.957] [Part]: PartModule indexing mismatch at B9.Aero.HL.Body.Tail.8m, index 6. Node 'ModuleFuelCrossfeedActions2' found in loaded data, but 'HotSpotModule' is defined in prefab. Looking for ModuleFuelCrossfeedActions2 in other indices... [WRN 02:27:15.957] ...ModuleFuelCrossfeedActions2 module found at index 8. [LOG 02:27:16.028] KSS Eos v2.1 (welding prep) loaded! [LOG 02:27:16.029] [CraftOrganizer]Reading plugin settings from /home/paul/Games/KSP-v1.2.2/game/KSP_Data/../GameData/KspCraftOrganizer/settings.conf [LOG 02:27:16.029] [CraftOrganizer]processOnShipNameChanged, old name: Untitled Space Craft, new name: KSS Eos v2.1 (welding prep) [LOG 02:27:16.029] [CraftOrganizer]It was detected that file was not saved because it does not exist: /home/paul/Games/KSP-v1.2.2/game/KSP_Data/../saves/AIES-B9-SETI game 1/Ships/SPH/Untitled Space Craft.craft [LOG 02:27:16.029] [CraftOrganizer]Cannot update last save date because file does not exist /home/paul/Games/KSP-v1.2.2/game/KSP_Data/../saves/AIES-B9-SETI game 1/Ships/SPH/KSS Eos v2.1 (welding prep).craft [ERR 02:27:16.095] Coroutine couldn't be started because the the game object 'SurfaceTail' is inactive! [ERR 02:27:16.095] Coroutine couldn't be started because the the game object 'HangarStationHub' is inactive! [ERR 02:27:16.095] Coroutine couldn't be started because the the game object 'SquareHeatshield2' is inactive! [ERR 02:27:16.095] Coroutine couldn't be started because the the game object 'SquareHeatshield' is inactive! [ERR 02:27:16.095] Coroutine couldn't be started because the the game object 'SpaceportRCS' is inactive! [ERR 02:27:16.095] Coroutine couldn't be started because the the game object 'HangarRadialAdapter2' is inactive! [ERR 02:27:16.095] Coroutine couldn't be started because the the game object 'HangarRadialAdapter1' is inactive! [ERR 02:27:16.095] Coroutine couldn't be started because the the game object 'HangarProcAdapter' is inactive! [ERR 02:27:16.095] Coroutine couldn't be started because the the game object 'HangarDockingPort' is inactive! [ERR 02:27:16.095] Coroutine couldn't be started because the the game object 'HangarExtensionXL' is inactive! [ERR 02:27:16.095] Coroutine couldn't be started because the the game object 'HangarExtensionL' is inactive! [ERR 02:27:16.095] Coroutine couldn't be started because the the game object 'HangarExtension' is inactive! [ERR 02:27:16.095] Coroutine couldn't be started because the the game object 'StructuralGrappleNode' is inactive! [ERR 02:27:16.095] Coroutine couldn't be started because the the game object 'MobileSmelter' is inactive! [ERR 02:27:16.098] Coroutine couldn't be started because the the game object 'SmallVTOLHangar' is inactive! [ERR 02:27:16.098] Coroutine couldn't be started because the the game object 'Hangar1' is inactive! [ERR 02:27:16.098] Coroutine couldn't be started because the the game object 'RoverLanderHangar' is inactive! [ERR 02:27:16.098] Coroutine couldn't be started because the the game object 'RadialHangar' is inactive! [ERR 02:27:16.098] Coroutine couldn't be started because the the game object 'InlineHangar2' is inactive! [ERR 02:27:16.098] Coroutine couldn't be started because the the game object 'InlineHangar1' is inactive! [ERR 02:27:16.098] Coroutine couldn't be started because the the game object 'InflatableSpaceHangar' is inactive! [ERR 02:27:16.099] Coroutine couldn't be started because the the game object 'InflatableHangar2' is inactive! [ERR 02:27:16.099] Coroutine couldn't be started because the the game object 'InflatableHangar1' is inactive! [ERR 02:27:16.099] Coroutine couldn't be started because the the game object 'FairingsOcto' is inactive! [ERR 02:27:16.099] Coroutine couldn't be started because the the game object 'Hangar2' is inactive! [LOG 02:27:16.103] [CraftOrganizer]processOnEditorStarted [LOG 02:27:16.103] [CraftOrganizer]It was detected that file was not saved because it does not exist: /home/paul/Games/KSP-v1.2.2/game/KSP_Data/../saves/AIES-B9-SETI game 1/Ships/SPH/KSS Eos v2.1 (welding prep).craft [LOG 02:27:16.103] [CraftOrganizer]Cannot update last save date because file does not exist /home/paul/Games/KSP-v1.2.2/game/KSP_Data/../saves/AIES-B9-SETI game 1/Ships/SPH/KSS Eos v2.1 (welding prep).craft [LOG 02:27:16.103] [CraftOrganizer][Event spy]On Editor started [LOG 02:27:16.103] [CraftOrganizer]Setting editor facility to SPH [LOG 02:27:16.155] [CraftOrganizer]processOnEditorLoaded, file: /home/paul/Games/KSP-v1.2.2/game/saves/AIES-B9-SETI game 1/Ships/SPH/KSS Eos v2_1 (welding prep).craft [LOG 02:27:16.155] [CraftOrganizer]Cannot update last save date because file does not exist /home/paul/Games/KSP-v1.2.2/game/KSP_Data/../saves/AIES-B9-SETI game 1/Ships/SPH/KSS Eos v2.1 (welding prep).craft [LOG 02:27:16.155] [CraftOrganizer][Event spy]On Loaded from /home/paul/Games/KSP-v1.2.2/game/saves/AIES-B9-SETI game 1/Ships/SPH/KSS Eos v2_1 (welding prep).craft [LOG 02:27:16.223] DragCubeSystem: Rendering procedural drag for mk4fuselage-3 [LOG 02:27:16.449] [Part mk4fuselage-3] [ModuleB9PartSwitch 'meshSwitch'] Switched subtype to LF/O [ERR 02:27:16.457] Coroutine couldn't be started because the the game object 'SurfaceTail' is inactive! [ERR 02:27:16.457] Coroutine couldn't be started because the the game object 'HangarStationHub' is inactive! [ERR 02:27:16.457] Coroutine couldn't be started because the the game object 'SquareHeatshield2' is inactive! [ERR 02:27:16.457] Coroutine couldn't be started because the the game object 'SquareHeatshield' is inactive! [ERR 02:27:16.457] Coroutine couldn't be started because the the game object 'SpaceportRCS' is inactive! [ERR 02:27:16.457] Coroutine couldn't be started because the the game object 'HangarRadialAdapter2' is inactive! [ERR 02:27:16.457] Coroutine couldn't be started because the the game object 'HangarRadialAdapter1' is inactive! [ERR 02:27:16.457] Coroutine couldn't be started because the the game object 'HangarProcAdapter' is inactive! [ERR 02:27:16.457] Coroutine couldn't be started because the the game object 'HangarDockingPort' is inactive! [ERR 02:27:16.457] Coroutine couldn't be started because the the game object 'HangarExtensionXL' is inactive! [ERR 02:27:16.457] Coroutine couldn't be started because the the game object 'HangarExtensionL' is inactive! [ERR 02:27:16.457] Coroutine couldn't be started because the the game object 'HangarExtension' is inactive! [ERR 02:27:16.457] Coroutine couldn't be started because the the game object 'StructuralGrappleNode' is inactive! [ERR 02:27:16.457] Coroutine couldn't be started because the the game object 'MobileSmelter' is inactive! [ERR 02:27:16.457] Coroutine couldn't be started because the the game object 'SmallVTOLHangar' is inactive! [ERR 02:27:16.457] Coroutine couldn't be started because the the game object 'Hangar1' is inactive! [ERR 02:27:16.458] Coroutine couldn't be started because the the game object 'RoverLanderHangar' is inactive! [ERR 02:27:16.458] Coroutine couldn't be started because the the game object 'RadialHangar' is inactive! [ERR 02:27:16.458] Coroutine couldn't be started because the the game object 'InlineHangar2' is inactive! [ERR 02:27:16.458] Coroutine couldn't be started because the the game object 'InlineHangar1' is inactive! [ERR 02:27:16.458] Coroutine couldn't be started because the the game object 'InflatableSpaceHangar' is inactive! [ERR 02:27:16.458] Coroutine couldn't be started because the the game object 'InflatableHangar2' is inactive! [ERR 02:27:16.458] Coroutine couldn't be started because the the game object 'InflatableHangar1' is inactive! [ERR 02:27:16.458] Coroutine couldn't be started because the the game object 'FairingsOcto' is inactive! [ERR 02:27:16.458] Coroutine couldn't be started because the the game object 'Hangar2' is inactive! [ERR 02:27:16.466] Coroutine couldn't be started because the the game object 'SurfaceTail' is inactive! [ERR 02:27:16.466] Coroutine couldn't be started because the the game object 'HangarStationHub' is inactive! [ERR 02:27:16.466] Coroutine couldn't be started because the the game object 'SquareHeatshield2' is inactive! [ERR 02:27:16.466] Coroutine couldn't be started because the the game object 'SquareHeatshield' is inactive! [ERR 02:27:16.466] Coroutine couldn't be started because the the game object 'SpaceportRCS' is inactive! [ERR 02:27:16.466] Coroutine couldn't be started because the the game object 'HangarRadialAdapter2' is inactive! [ERR 02:27:16.466] Coroutine couldn't be started because the the game object 'HangarRadialAdapter1' is inactive! [ERR 02:27:16.466] Coroutine couldn't be started because the the game object 'HangarProcAdapter' is inactive! [ERR 02:27:16.466] Coroutine couldn't be started because the the game object 'HangarDockingPort' is inactive! [ERR 02:27:16.466] Coroutine couldn't be started because the the game object 'HangarExtensionXL' is inactive! [ERR 02:27:16.466] Coroutine couldn't be started because the the game object 'HangarExtensionL' is inactive! [ERR 02:27:16.466] Coroutine couldn't be started because the the game object 'HangarExtension' is inactive! [ERR 02:27:16.466] Coroutine couldn't be started because the the game object 'StructuralGrappleNode' is inactive! [ERR 02:27:16.466] Coroutine couldn't be started because the the game object 'MobileSmelter' is inactive! [ERR 02:27:16.466] Coroutine couldn't be started because the the game object 'SmallVTOLHangar' is inactive! [ERR 02:27:16.466] Coroutine couldn't be started because the the game object 'Hangar1' is inactive! [ERR 02:27:16.466] Coroutine couldn't be started because the the game object 'RoverLanderHangar' is inactive! [ERR 02:27:16.466] Coroutine couldn't be started because the the game object 'RadialHangar' is inactive! [ERR 02:27:16.466] Coroutine couldn't be started because the the game object 'InlineHangar2' is inactive! [ERR 02:27:16.466] Coroutine couldn't be started because the the game object 'InlineHangar1' is inactive! [ERR 02:27:16.466] Coroutine couldn't be started because the the game object 'InflatableSpaceHangar' is inactive! [ERR 02:27:16.467] Coroutine couldn't be started because the the game object 'InflatableHangar2' is inactive! [ERR 02:27:16.467] Coroutine couldn't be started because the the game object 'InflatableHangar1' is inactive! [ERR 02:27:16.467] Coroutine couldn't be started because the the game object 'FairingsOcto' is inactive! [ERR 02:27:16.467] Coroutine couldn't be started because the the game object 'Hangar2' is inactive! [LOG 02:27:16.470] WBIConvertibleStorage [FFD9F050][225.9133]: SetupAnimations called. [LOG 02:27:16.470] WBIConvertibleStorage [FFD9F050][225.9133]: Part is not inflatable. [LOG 02:27:16.471] WBIConvertibleStorage [FFD9F050][225.9133]: OnStart - State: Editor Part: WBI.Tundra400 [LOG 02:27:16.471] WBIConvertibleStorage [FFD9F050][225.9133]: initTemplates called templateNodes: KONSTRUCTION_TEMPLATE;STORAGE_TEMPLATE templateTags: [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: KONSTRUCTION_TEMPLATE;STORAGE_TEMPLATE has 38 templates. [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 0: Konstruction (Equipment) [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 1: Konstruction (Konkrete) [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 2: Coolant [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 3: Dirt [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 4: Equipment [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 5: ExoticMinerals [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 6: Fertilizer [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 7: FusionPellets [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 8: KIS [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 9: Karborundum [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 10: Konkrete [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 11: LFO [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 12: Lead [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 13: LiquidFuel [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 14: LiquidHydrogen [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 15: MaterialKits [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 16: MetallicOre [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 17: Metals [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 18: Minerals [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 19: MonoProp [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 20: Ore [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 21: Organics [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 22: Oxidizer [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 23: RareMetals [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 24: ResearchKits [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 25: RocketParts [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 26: Slag [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 27: Uraninite [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 28: Water [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 29: Xenon Gas [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 30: Cryo [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 31: Oxidizer [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 32: USILS [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 33: Supplies [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 34: ReplacementParts [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 35: Solid Rocket Motor Fuel [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 36: Aurum [LOG 02:27:16.477] WBIConvertibleStorage [FFD9F050][225.9133]: Template 37: Aurum and Ore [LOG 02:27:16.478] WBIConvertibleStorage [FFD9F050][225.9133]: RedecorateModule called. loadTemplateResources: False template index: 32 [LOG 02:27:16.479] WBIConvertibleStorage [FFD9F050][225.9133]: updateResourcesFromTemplate called for template: USILS [LOG 02:27:16.479] WBIConvertibleStorage [FFD9F050][225.9133]: template: STORAGE_TEMPLATE { description = This kit stores Supplies, Mulch, Fertilizer, and Dirt for your life support needs. glowPanel = WildBlueIndustries/000WildBlueTools/CommonTemplates/Decals/LifeSupportGlow logoPanel = WildBlueIndustries/000WildBlueTools/CommonTemplates/Decals/LifeSupport shortName = Life Support title = Life Support (USI) name = USILS author = Angel-125 RESOURCE { maxAmount = 2700 amount = 2700 name = Supplies } RESOURCE { maxAmount = 1000 amount = 0 name = Mulch } RESOURCE { maxAmount = 1900 amount = 1900 name = Fertilizer } } [LOG 02:27:16.479] WBIConvertibleStorage [FFD9F050][225.9133]: capacityFactor: 0.3 [LOG 02:27:16.479] WBIConvertibleStorage [FFD9F050][225.9133]: template resource count: 3 [LOG 02:27:16.479] WBIConvertibleStorage [FFD9F050][225.9133]: OnRedecorateModule called [LOG 02:27:16.479] WBIConvertibleStorage [FFD9F050][225.9133]: loadModulesFromTemplate called for template: USILS [LOG 02:27:16.479] WBIConvertibleStorage [FFD9F050][225.9133]: New name: USILS [LOG 02:27:16.480] WBIConvertibleStorage [FFD9F050][225.9133]: changeDecals called. [LOG 02:27:16.480] WBIConvertibleStorage [FFD9F050][225.9133]: changeDecals has no named transforms to change. [LOG 02:27:16.480] WBIConvertibleStorage [FFD9F050][225.9133]: Module redecorated. [LOG 02:27:16.481] WBIConvertibleStorage [FFD9F050][225.9133]: initModuleGUI called [ERR 02:27:16.488] Coroutine couldn't be started because the the game object 'SurfaceTail' is inactive! [ERR 02:27:16.488] Coroutine couldn't be started because the the game object 'HangarStationHub' is inactive! [ERR 02:27:16.488] Coroutine couldn't be started because the the game object 'SquareHeatshield2' is inactive! [ERR 02:27:16.488] Coroutine couldn't be started because the the game object 'SquareHeatshield' is inactive! [ERR 02:27:16.488] Coroutine couldn't be started because the the game object 'SpaceportRCS' is inactive! [ERR 02:27:16.488] Coroutine couldn't be started because the the game object 'HangarRadialAdapter2' is inactive! [ERR 02:27:16.488] Coroutine couldn't be started because the the game object 'HangarRadialAdapter1' is inactive! [ERR 02:27:16.488] Coroutine couldn't be started because the the game object 'HangarProcAdapter' is inactive! [ERR 02:27:16.488] Coroutine couldn't be started because the the game object 'HangarDockingPort' is inactive! [ERR 02:27:16.488] Coroutine couldn't be started because the the game object 'HangarExtensionXL' is inactive! [ERR 02:27:16.488] Coroutine couldn't be started because the the game object 'HangarExtensionL' is inactive! [ERR 02:27:16.488] Coroutine couldn't be started because the the game object 'HangarExtension' is inactive! [ERR 02:27:16.488] Coroutine couldn't be started because the the game object 'StructuralGrappleNode' is inactive! [ERR 02:27:16.488] Coroutine couldn't be started because the the game object 'MobileSmelter' is inactive! [ERR 02:27:16.488] Coroutine couldn't be started because the the game object 'SmallVTOLHangar' is inactive! [ERR 02:27:16.488] Coroutine couldn't be started because the the game object 'Hangar1' is inactive! [ERR 02:27:16.488] Coroutine couldn't be started because the the game object 'RoverLanderHangar' is inactive! [ERR 02:27:16.488] Coroutine couldn't be started because the the game object 'RadialHangar' is inactive! [ERR 02:27:16.488] Coroutine couldn't be started because the the game object 'InlineHangar2' is inactive! [ERR 02:27:16.488] Coroutine couldn't be started because the the game object 'InlineHangar1' is inactive! [ERR 02:27:16.488] Coroutine couldn't be started because the the game object 'InflatableSpaceHangar' is inactive! [ERR 02:27:16.488] Coroutine couldn't be started because the the game object 'InflatableHangar2' is inactive! [ERR 02:27:16.488] Coroutine couldn't be started because the the game object 'InflatableHangar1' is inactive! [ERR 02:27:16.488] Coroutine couldn't be started because the the game object 'FairingsOcto' is inactive! [ERR 02:27:16.488] Coroutine couldn't be started because the the game object 'Hangar2' is inactive! [LOG 02:27:16.490] WBIConvertibleStorage [FFD9EFEC][225.9133]: SetupAnimations called. [LOG 02:27:16.490] WBIConvertibleStorage [FFD9EFEC][225.9133]: Part is not inflatable. [LOG 02:27:16.490] WBIConvertibleStorage [FFD9EFEC][225.9133]: OnStart - State: Editor Part: WBI.Tundra400 [LOG 02:27:16.490] WBIConvertibleStorage [FFD9EFEC][225.9133]: initTemplates called templateNodes: KONSTRUCTION_TEMPLATE;STORAGE_TEMPLATE templateTags: [LOG 02:27:16.498] WBIConvertibleStorage [FFD9EFEC][225.9133]: KONSTRUCTION_TEMPLATE;STORAGE_TEMPLATE has 38 templates. [LOG 02:27:16.498] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 0: Konstruction (Equipment) [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 1: Konstruction (Konkrete) [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 2: Coolant [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 3: Dirt [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 4: Equipment [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 5: ExoticMinerals [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 6: Fertilizer [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 7: FusionPellets [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 8: KIS [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 9: Karborundum [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 10: Konkrete [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 11: LFO [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 12: Lead [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 13: LiquidFuel [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 14: LiquidHydrogen [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 15: MaterialKits [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 16: MetallicOre [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 17: Metals [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 18: Minerals [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 19: MonoProp [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 20: Ore [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 21: Organics [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 22: Oxidizer [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 23: RareMetals [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 24: ResearchKits [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 25: RocketParts [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 26: Slag [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 27: Uraninite [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 28: Water [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 29: Xenon Gas [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 30: Cryo [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 31: Oxidizer [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 32: USILS [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 33: Supplies [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 34: ReplacementParts [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 35: Solid Rocket Motor Fuel [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 36: Aurum [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Template 37: Aurum and Ore [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: RedecorateModule called. loadTemplateResources: False template index: 32 [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: updateResourcesFromTemplate called for template: USILS [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: template: STORAGE_TEMPLATE { description = This kit stores Supplies, Mulch, Fertilizer, and Dirt for your life support needs. glowPanel = WildBlueIndustries/000WildBlueTools/CommonTemplates/Decals/LifeSupportGlow logoPanel = WildBlueIndustries/000WildBlueTools/CommonTemplates/Decals/LifeSupport shortName = Life Support title = Life Support (USI) name = USILS author = Angel-125 RESOURCE { maxAmount = 2700 amount = 2700 name = Supplies } RESOURCE { maxAmount = 1000 amount = 0 name = Mulch } RESOURCE { maxAmount = 1900 amount = 1900 name = Fertilizer } } [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: capacityFactor: 0.3 [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: template resource count: 3 [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: OnRedecorateModule called [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: loadModulesFromTemplate called for template: USILS [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: New name: USILS [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: changeDecals called. [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: changeDecals has no named transforms to change. [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: Module redecorated. [LOG 02:27:16.499] WBIConvertibleStorage [FFD9EFEC][225.9133]: initModuleGUI called [ERR 02:27:16.505] Coroutine couldn't be started because the the game object 'SurfaceTail' is inactive! [ERR 02:27:16.505] Coroutine couldn't be started because the the game object 'HangarStationHub' is inactive! [ERR 02:27:16.505] Coroutine couldn't be started because the the game object 'SquareHeatshield2' is inactive! [ERR 02:27:16.505] Coroutine couldn't be started because the the game object 'SquareHeatshield' is inactive! [ERR 02:27:16.505] Coroutine couldn't be started because the the game object 'SpaceportRCS' is inactive! [ERR 02:27:16.505] Coroutine couldn't be started because the the game object 'HangarRadialAdapter2' is inactive! [ERR 02:27:16.505] Coroutine couldn't be started because the the game object 'HangarRadialAdapter1' is inactive! [ERR 02:27:16.505] Coroutine couldn't be started because the the game object 'HangarProcAdapter' is inactive! [ERR 02:27:16.505] Coroutine couldn't be started because the the game object 'HangarDockingPort' is inactive! [ERR 02:27:16.505] Coroutine couldn't be started because the the game object 'HangarExtensionXL' is inactive! [ERR 02:27:16.505] Coroutine couldn't be started because the the game object 'HangarExtensionL' is inactive! [ERR 02:27:16.505] Coroutine couldn't be started because the the game object 'HangarExtension' is inactive! [ERR 02:27:16.505] Coroutine couldn't be started because the the game object 'StructuralGrappleNode' is inactive! [ERR 02:27:16.505] Coroutine couldn't be started because the the game object 'MobileSmelter' is inactive! [ERR 02:27:16.505] Coroutine couldn't be started because the the game object 'SmallVTOLHangar' is inactive! [ERR 02:27:16.505] Coroutine couldn't be started because the the game object 'Hangar1' is inactive! [ERR 02:27:16.505] Coroutine couldn't be started because the the game object 'RoverLanderHangar' is inactive! [ERR 02:27:16.505] Coroutine couldn't be started because the the game object 'RadialHangar' is inactive! [ERR 02:27:16.505] Coroutine couldn't be started because the the game object 'InlineHangar2' is inactive! [ERR 02:27:16.505] Coroutine couldn't be started because the the game object 'InlineHangar1' is inactive! [ERR 02:27:16.505] Coroutine couldn't be started because the the game object 'InflatableSpaceHangar' is inactive! [ERR 02:27:16.505] Coroutine couldn't be started because the the game object 'InflatableHangar2' is inactive! [ERR 02:27:16.505] Coroutine couldn't be started because the the game object 'InflatableHangar1' is inactive! [ERR 02:27:16.505] Coroutine couldn't be started because the the game object 'FairingsOcto' is inactive! [ERR 02:27:16.505] Coroutine couldn't be started because the the game object 'Hangar2' is inactive! [LOG 02:27:16.507] WBIConvertibleStorage [FFD9EFB6][225.9133]: SetupAnimations called. [LOG 02:27:16.507] WBIConvertibleStorage [FFD9EFB6][225.9133]: Part is not inflatable. [LOG 02:27:16.507] WBIConvertibleStorage [FFD9EFB6][225.9133]: OnStart - State: Editor Part: WBI.Tundra400 [LOG 02:27:16.507] WBIConvertibleStorage [FFD9EFB6][225.9133]: initTemplates called templateNodes: KONSTRUCTION_TEMPLATE;STORAGE_TEMPLATE templateTags: [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: KONSTRUCTION_TEMPLATE;STORAGE_TEMPLATE has 38 templates. [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 0: Konstruction (Equipment) [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 1: Konstruction (Konkrete) [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 2: Coolant [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 3: Dirt [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 4: Equipment [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 5: ExoticMinerals [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 6: Fertilizer [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 7: FusionPellets [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 8: KIS [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 9: Karborundum [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 10: Konkrete [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 11: LFO [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 12: Lead [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 13: LiquidFuel [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 14: LiquidHydrogen [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 15: MaterialKits [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 16: MetallicOre [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 17: Metals [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 18: Minerals [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 19: MonoProp [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 20: Ore [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 21: Organics [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 22: Oxidizer [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 23: RareMetals [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 24: ResearchKits [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 25: RocketParts [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 26: Slag [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 27: Uraninite [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 28: Water [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 29: Xenon Gas [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 30: Cryo [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 31: Oxidizer [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 32: USILS [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 33: Supplies [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 34: ReplacementParts [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 35: Solid Rocket Motor Fuel [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 36: Aurum [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: Template 37: Aurum and Ore [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: RedecorateModule called. loadTemplateResources: False template index: 32 [LOG 02:27:16.511] WBIConvertibleStorage [FFD9EFB6][225.9133]: updateResourcesFromTemplate called for template: USILS [LOG 02:27:16.512] WBIConvertibleStorage [FFD9EFB6][225.9133]: template: STORAGE_TEMPLATE { description = This kit stores Supplies, Mulch, Fertilizer, and Dirt for your life support needs. glowPanel = WildBlueIndustries/000WildBlueTools/CommonTemplates/Decals/LifeSupportGlow logoPanel = WildBlueIndustries/000WildBlueTools/CommonTemplates/Decals/LifeSupport shortName = Life Support title = Life Support (USI) name = USILS author = Angel-125 RESOURCE { maxAmount = 2700 amount = 2700 name = Supplies } RESOURCE { maxAmount = 1000 amount = 0 name = Mulch } RESOURCE { maxAmount = 1900 amount = 1900 name = Fertilizer } } [LOG 02:27:16.512] WBIConvertibleStorage [FFD9EFB6][225.9133]: capacityFactor: 0.3 [LOG 02:27:16.512] WBIConvertibleStorage [FFD9EFB6][225.9133]: template resource count: 3 [LOG 02:27:16.512] WBIConvertibleStorage [FFD9EFB6][225.9133]: OnRedecorateModule called [LOG 02:27:16.512] WBIConvertibleStorage [FFD9EFB6][225.9133]: loadModulesFromTemplate called for template: USILS [LOG 02:27:16.512] WBIConvertibleStorage [FFD9EFB6][225.9133]: New name: USILS [LOG 02:27:16.512] WBIConvertibleStorage [FFD9EFB6][225.9133]: changeDecals called. [LOG 02:27:16.512] WBIConvertibleStorage [FFD9EFB6][225.9133]: changeDecals has no named transforms to change. [LOG 02:27:16.512] WBIConvertibleStorage [FFD9EFB6][225.9133]: Module redecorated. [LOG 02:27:16.512] WBIConvertibleStorage [FFD9EFB6][225.9133]: initModuleGUI called [LOG 02:27:16.523] Getting value. Currently: False [LOG 02:27:16.523] New value: False [LOG 02:27:16.524] Getting value. Currently: False [LOG 02:27:16.524] New value: False [LOG 02:27:16.534] DragCubeSystem: Rendering procedural drag for mk4cargo-1 [LOG 02:27:16.647] [Part mk4cargo-1] [ModuleB9PartSwitch 'meshSwitch'] Switched subtype to LF/O [LOG 02:27:16.649] [Part mk3FuselageLFO.100] [ModuleB9PartSwitch 'fuelSwitch'] Switched subtype to LF/O [ERR 02:27:16.650] [ERROR] [Part B9.Aero.HL.Body.Tail.8m] [ModuleB9PartSwitch 'fuelSwitch'] Cannot find subtype named 'Lowered_LFO' [LOG 02:27:16.660] [Part B9.Aero.HL.Body.Tail.8m] [ModuleB9PartSwitch 'fuelSwitch'] Inferred subtype based on part's resources: 'LFO' [LOG 02:27:16.663] [Part B9.Aero.HL.Body.Tail.8m] [ModuleB9PartSwitch 'fuelSwitch'] Switched subtype to LFO [LOG 02:27:16.663] DragCubeSystem: Rendering procedural drag for B9.Aero.HL.Body.Tail.8m [LOG 02:27:16.689] [Part B9.Aero.HL.Body.Tail.8m] [ModuleB9PartSwitch 'meshSwitch'] Switched subtype to Raised [LOG 02:27:16.690] [Part mk2FuselageLongLFO] [ModuleB9PartSwitch 'fuelSwitch'] Switched subtype to LF/O [LOG 02:27:16.694] [Part adapterMk3-Size2Slant] [ModuleB9PartSwitch 'fuelSwitch'] Switched subtype to LF/O [LOG 02:27:16.694] [Part mk3FuselageLFO.100] [ModuleB9PartSwitch 'fuelSwitch'] Switched subtype to LF/O [ERR 02:27:16.695] [ERROR] [Part B9.Aero.HL.Body.Tail.8m] [ModuleB9PartSwitch 'fuelSwitch'] Cannot find subtype named 'Lowered_LFO' [LOG 02:27:16.695] [Part B9.Aero.HL.Body.Tail.8m] [ModuleB9PartSwitch 'fuelSwitch'] Inferred subtype based on part's resources: 'LFO' [LOG 02:27:16.695] [Part B9.Aero.HL.Body.Tail.8m] [ModuleB9PartSwitch 'fuelSwitch'] Switched subtype to LFO [LOG 02:27:16.695] DragCubeSystem: Rendering procedural drag for B9.Aero.HL.Body.Tail.8m [LOG 02:27:16.718] [Part B9.Aero.HL.Body.Tail.8m] [ModuleB9PartSwitch 'meshSwitch'] Switched subtype to Raised [LOG 02:27:16.718] [Part mk2FuselageLongLFO] [ModuleB9PartSwitch 'fuelSwitch'] Switched subtype to LF/O [LOG 02:27:16.719] [Part adapterMk3-Size2Slant] [ModuleB9PartSwitch 'fuelSwitch'] Switched subtype to LF/O [LOG 02:27:16.720] DragCubeSystem: Rendering procedural drag for mk4fuselage-3 [LOG 02:27:16.767] [Part mk4fuselage-3] [ModuleB9PartSwitch 'meshSwitch'] Switched subtype to LF/O [LOG 02:27:16.768] DragCubeSystem: Rendering procedural drag for mk4tail-1 [LOG 02:27:16.789] [Part mk4tail-1] [ModuleB9PartSwitch 'meshSwitch'] Switched subtype to LF/O/MP And this... this is the long, long log of the welding process: Spoiler [LOG 02:33:38.760] [WeldingTool] Config was saved [LOG 02:33:38.761] [WeldingTool] v2.5.0.0 - 1.2.2 - Continued [LOG 02:33:38.761] [WeldingTool] ----- Starting Welding ----- [LOG 02:33:38.766] [WeldingTool] Welding this part: mk4fuselage-3 [LOG 02:33:38.766] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.766] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.767] [WeldingTool] mk4fuselage-3 Attache mode STACK Attach method FIXED_JOINT [LOG 02:33:38.769] [WeldingTool] .Found 1 config files [LOG 02:33:38.770] [WeldingTool] ..Config mk4fuselage-3 has 1 MODEL node [LOG 02:33:38.770] [WeldingTool] ..MODEL url: MarkIVSystem/Parts/Fuselage/mk4fuselage-3 [LOG 02:33:38.770] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.770] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.770] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.770] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.770] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.770] [WeldingTool] ..Childs count 6 [LOG 02:33:38.770] [WeldingTool] scaling info: rescaleFactor=1| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.770] [WeldingTool] ..newpart position (0.000, 15.125, 0.000) [LOG 02:33:38.770] [WeldingTool] ..newpart rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.770] [WeldingTool] ..newpart rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.770] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.771] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.771] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.771] [WeldingTool] ..position (0.000, 15.125, 0.000) [LOG 02:33:38.771] [WeldingTool] ..rotation (0.000, 0.000, 0.000) [LOG 02:33:38.771] [WeldingTool] ..scale (1.000, 1.000, 1.000) [LOG 02:33:38.772] [WeldingTool] ..Part Part has 2 RESOURCE node [LOG 02:33:38.772] [WeldingTool] ..RESOURCE new: LiquidFuel 1800/1800 [LOG 02:33:38.772] [WeldingTool] ..RESOURCE new: Oxidizer 2200/2200 [LOG 02:33:38.772] [WeldingTool] ..Config mk4fuselage-3 has 8 MODULE node [LOG 02:33:38.772] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.773] [WeldingTool] [WeldingTool] ..MODULE add: ModuleLiftingSurface [LOG 02:33:38.773] [WeldingTool] | Module ready to add = True [LOG 02:33:38.773] [WeldingTool] [WeldingTool] ..MODULE add: ModuleAGX [LOG 02:33:38.773] [WeldingTool] | Module ready to add = True [LOG 02:33:38.773] [WeldingTool] | Module ready to add = True [LOG 02:33:38.773] [WeldingTool] [WeldingTool] ..MODULE add: ModuleModActions [LOG 02:33:38.773] [WeldingTool] | Module ready to add = True [LOG 02:33:38.773] [WeldingTool] | Module ready to add = True [LOG 02:33:38.773] [WeldingTool] | Module ready to add = True [LOG 02:33:38.773] [WeldingTool] [WeldingTool] ..MODULE add: HotSpotModule [LOG 02:33:38.773] [WeldingTool] | Module ready to add = True [LOG 02:33:38.773] [WeldingTool] | Module ready to add = True [LOG 02:33:38.773] [WeldingTool] | Module ready to add = True [LOG 02:33:38.773] [WeldingTool] | Module ready to add = True [LOG 02:33:38.773] [WeldingTool] [WeldingTool] ..MODULE add: ModuleCryoTank [LOG 02:33:38.773] [WeldingTool] | Module ready to add = True [LOG 02:33:38.773] [WeldingTool] | Module ready to add = True [LOG 02:33:38.773] [WeldingTool] | Module ready to add = True [LOG 02:33:38.773] [WeldingTool] | Module ready to add = True [LOG 02:33:38.773] [WeldingTool] | Module ready to add = True [LOG 02:33:38.773] [WeldingTool] | Module ready to add = True [LOG 02:33:38.773] [WeldingTool] | Module ready to add = True [LOG 02:33:38.773] [WeldingTool] | Module ready to add = True [LOG 02:33:38.773] [WeldingTool] | Module ready to add = True [LOG 02:33:38.773] [WeldingTool] | Module ready to add = True [LOG 02:33:38.773] [WeldingTool] [WeldingTool] ..MODULE add: ModuleFuelCrossfeedActions2 [LOG 02:33:38.773] [WeldingTool] ..Config mk4fuselage-3 has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.774] [WeldingTool] ..Config mk4fuselage-3 has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.774] [WeldingTool] ..Config mk4fuselage-3 has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.774] [WeldingTool] ..Config mk4fuselage-3 has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.774] [WeldingTool] .Part mk4fuselage-3 has 2 Stack attach node(s) [LOG 02:33:38.774] [WeldingTool] ..set relative position =(0.000, 15.125, 0.000) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.774] [WeldingTool] .Stack Node Add: topmk4fuselage-30 [LOG 02:33:38.774] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.775] [WeldingTool] New Center of Mass: (0.0, 15.1, 0.0) [LOG 02:33:38.775] [WeldingTool] Part crashTolerance: 50 - Global crashTolerance: 50 - method: WeightedAverage [LOG 02:33:38.775] [WeldingTool] Part crashTolerance: 300 - Global crashTolerance: 300 - method: WeightedAverage [LOG 02:33:38.775] [WeldingTool] Part breakingTorque: 300 - Global breakingTorque: 300 - method: WeightedAverage [LOG 02:33:38.775] [WeldingTool] Part maxTemp: 2500 - Global maxTemp: 2500 - method: WeightedAverage [LOG 02:33:38.775] [WeldingTool] weldThisPart - newpart.partInfo.category: Propulsion [LOG 02:33:38.775] [WeldingTool] Welding this part: C3.Kontainer.KIS.02 [LOG 02:33:38.775] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.775] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.775] [WeldingTool] C3.Kontainer.KIS.02 Attache mode SRF_ATTACH Attach method FIXED_JOINT [LOG 02:33:38.778] [WeldingTool] .Found 1 config files [LOG 02:33:38.778] [WeldingTool] ..Config C3_Kontainer_KIS_02 has 1 MODEL node [LOG 02:33:38.778] [WeldingTool] ..MODEL url: UmbraSpaceIndustries/Kontainers/Assets/Kontainer [LOG 02:33:38.778] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.778] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.778] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.778] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.778] [WeldingTool] ..node.HasValue("scale") True [LOG 02:33:38.778] [WeldingTool] ..node scale 2,2,2 [LOG 02:33:38.778] [WeldingTool] ..Childs count 6 [LOG 02:33:38.778] [WeldingTool] scaling info: rescaleFactor=1| scale=1| config.scale=(2.000, 2.000, 2.000) [LOG 02:33:38.778] [WeldingTool] ..newpart position (0.000, 17.425, 0.600) [LOG 02:33:38.778] [WeldingTool] ..newpart rotation (-0.500, 0.500, 0.500, 0.500) [LOG 02:33:38.778] [WeldingTool] ..newpart rotation.eulerAngles (270.000, 90.000, 0.000) [LOG 02:33:38.778] [WeldingTool] ..newpart rotation.localEulerAngles (270.000, 90.000, 0.000) [LOG 02:33:38.778] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.778] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.778] [WeldingTool] ..position (0.000, 17.425, 0.600) [LOG 02:33:38.778] [WeldingTool] ..rotation (270.000, 90.000, 0.000) [LOG 02:33:38.778] [WeldingTool] ..scale (2.000, 2.000, 2.000) [LOG 02:33:38.778] [WeldingTool] ..texture Kontainer_11, UmbraSpaceIndustries/Kontainers/Assets/Kontainer_KIS [LOG 02:33:38.778] [WeldingTool] ..Part Part has 0 RESOURCE node [LOG 02:33:38.778] [WeldingTool] ..Config C3_Kontainer_KIS_02 has 6 MODULE node [LOG 02:33:38.778] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.778] [WeldingTool] | Module ready to add = True [LOG 02:33:38.778] [WeldingTool] | Module ready to add = True [LOG 02:33:38.778] [WeldingTool] | Module ready to add = True [LOG 02:33:38.778] [WeldingTool] | Module ready to add = True [LOG 02:33:38.778] [WeldingTool] | Module ready to add = True [LOG 02:33:38.778] [WeldingTool] | Module ready to add = True [LOG 02:33:38.778] [WeldingTool] [WeldingTool] ..MODULE add: ModuleKISInventory [LOG 02:33:38.778] [WeldingTool] | Module ready to add = True [LOG 02:33:38.778] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.778] [WeldingTool] | Module ready to add = True [LOG 02:33:38.778] [WeldingTool] | Module ready to add = True [LOG 02:33:38.778] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.778] [WeldingTool] | Module ready to add = True [LOG 02:33:38.778] [WeldingTool] | Module ready to add = True [LOG 02:33:38.778] [WeldingTool] | Module ready to add = True [LOG 02:33:38.778] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.778] [WeldingTool] | Module ready to add = True [LOG 02:33:38.778] [WeldingTool] | Module ready to add = True [LOG 02:33:38.778] [WeldingTool] | Module ready to add = True [LOG 02:33:38.779] [WeldingTool] | Module ready to add = True [LOG 02:33:38.779] [WeldingTool] | Module ready to add = True [LOG 02:33:38.779] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.779] [WeldingTool] | Module ready to add = True [LOG 02:33:38.779] [WeldingTool] | Module ready to add = True [LOG 02:33:38.779] [WeldingTool] | Module ready to add = True [LOG 02:33:38.779] [WeldingTool] | Module ready to add = True [LOG 02:33:38.779] [WeldingTool] | Module ready to add = True [LOG 02:33:38.779] [WeldingTool] | Module ready to add = True [LOG 02:33:38.779] [WeldingTool] | Module ready to add = True [LOG 02:33:38.779] [WeldingTool] [WeldingTool] ..MODULE add: OseModuleInventoryPreference [LOG 02:33:38.779] [WeldingTool] ..Config C3_Kontainer_KIS_02 has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.779] [WeldingTool] ..Config C3_Kontainer_KIS_02 has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.779] [WeldingTool] ..Config C3_Kontainer_KIS_02 has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.779] [WeldingTool] ..Config C3_Kontainer_KIS_02 has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.779] [WeldingTool] .Part C3.Kontainer.KIS.02 has 3 Stack attach node(s) [LOG 02:33:38.779] [WeldingTool] ..set relative position =(0.000, 17.425, 0.600) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.779] [WeldingTool] .Stack Node Add: sideC3.Kontainer.KIS.021 [LOG 02:33:38.779] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.779] [WeldingTool] New Center of Mass: (0.0, 15.3, 0.0) [LOG 02:33:38.779] [WeldingTool] Part crashTolerance: 8 - Global crashTolerance: 32.73026 - method: WeightedAverage [LOG 02:33:38.779] [WeldingTool] Part crashTolerance: 2072 - Global crashTolerance: 1028.618 - method: WeightedAverage [LOG 02:33:38.779] [WeldingTool] Part breakingTorque: 2072 - Global breakingTorque: 1028.618 - method: WeightedAverage [LOG 02:33:38.779] [WeldingTool] Part maxTemp: 2000 - Global maxTemp: 2294.408 - method: WeightedAverage [LOG 02:33:38.779] [WeldingTool] Welding this part: LS.Tank.125 [LOG 02:33:38.779] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.779] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.779] [WeldingTool] LS.Tank.125 Attache mode STACK Attach method FIXED_JOINT [LOG 02:33:38.782] [WeldingTool] .Found 1 config files [LOG 02:33:38.782] [WeldingTool] ..Config LS_Tank_125 has 1 MODEL node [LOG 02:33:38.782] [WeldingTool] ..MODEL url: UmbraSpaceIndustries/LifeSupport/Assets/Tank_125 [LOG 02:33:38.782] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.782] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.782] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.782] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.782] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.782] [WeldingTool] ..Childs count 1 [LOG 02:33:38.782] [WeldingTool] scaling info: rescaleFactor=1| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.782] [WeldingTool] ..newpart position (2.250, 17.425, 0.600) [LOG 02:33:38.782] [WeldingTool] ..newpart rotation (0.000, 0.000, -0.707, 0.707) [LOG 02:33:38.782] [WeldingTool] ..newpart rotation.eulerAngles (0.000, 0.000, 270.000) [LOG 02:33:38.782] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 270.000, 180.000) [LOG 02:33:38.782] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.782] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.782] [WeldingTool] ..position (2.250, 17.425, 0.600) [LOG 02:33:38.782] [WeldingTool] ..rotation (0.000, 0.000, 270.000) [LOG 02:33:38.782] [WeldingTool] ..scale (1.000, 1.000, 1.000) [LOG 02:33:38.782] [WeldingTool] ..Part Part has 2 RESOURCE node [LOG 02:33:38.782] [WeldingTool] ..RESOURCE new: Supplies 500/500 [LOG 02:33:38.782] [WeldingTool] ..RESOURCE new: Mulch 0/10 [LOG 02:33:38.782] [WeldingTool] ..Config LS_Tank_125 has 6 MODULE node [LOG 02:33:38.783] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.783] [WeldingTool] | Module ready to add = True [LOG 02:33:38.783] [WeldingTool] | Module ready to add = True [LOG 02:33:38.783] [WeldingTool] | Module ready to add = True [LOG 02:33:38.783] [WeldingTool] | Module ready to add = True [LOG 02:33:38.783] [WeldingTool] | Module ready to add = True [LOG 02:33:38.783] [WeldingTool] | Module ready to add = True [LOG 02:33:38.783] [WeldingTool] | Module ready to add = True [LOG 02:33:38.783] [WeldingTool] | Module ready to add = True [LOG 02:33:38.783] [WeldingTool] | Module ready to add = True [LOG 02:33:38.783] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.783] [WeldingTool] | Module ready to add = True [LOG 02:33:38.783] [WeldingTool] | Module ready to add = True [LOG 02:33:38.783] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.783] [WeldingTool] | Module ready to add = True [LOG 02:33:38.783] [WeldingTool] | Module ready to add = True [LOG 02:33:38.783] [WeldingTool] | Module ready to add = True [LOG 02:33:38.783] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.783] [WeldingTool] | Module ready to add = True [LOG 02:33:38.783] [WeldingTool] | Module ready to add = True [LOG 02:33:38.783] [WeldingTool] | Module ready to add = True [LOG 02:33:38.783] [WeldingTool] | Module ready to add = True [LOG 02:33:38.783] [WeldingTool] | Module ready to add = True [LOG 02:33:38.783] [WeldingTool] | Module ready to add = True [LOG 02:33:38.783] [WeldingTool] | Module ready to add = True [LOG 02:33:38.783] [WeldingTool] | Module ready to add = True [LOG 02:33:38.783] [WeldingTool] [WeldingTool] ..MODULE add: ModuleResourceActions2 [LOG 02:33:38.783] [WeldingTool] | Module ready to add = True [LOG 02:33:38.783] [WeldingTool] | Module ready to add = True [LOG 02:33:38.783] [WeldingTool] | Module ready to add = True [LOG 02:33:38.783] [WeldingTool] | Module ready to add = True [LOG 02:33:38.783] [WeldingTool] | Module ready to add = True [LOG 02:33:38.783] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.783] [WeldingTool] ..Config LS_Tank_125 has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.783] [WeldingTool] ..Config LS_Tank_125 has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.783] [WeldingTool] ..Config LS_Tank_125 has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.783] [WeldingTool] ..Config LS_Tank_125 has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.783] [WeldingTool] .Part LS.Tank.125 has 2 Stack attach node(s) [LOG 02:33:38.783] [WeldingTool] ..set relative position =(2.250, 17.425, 0.600) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.783] [WeldingTool] .Stack Node Add: topLS.Tank.1252 [LOG 02:33:38.783] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.783] [WeldingTool] New Center of Mass: (0.1, 15.4, 0.1) [LOG 02:33:38.783] [WeldingTool] Part crashTolerance: 7 - Global crashTolerance: 32.21193 - method: WeightedAverage [LOG 02:33:38.783] [WeldingTool] Part crashTolerance: 22 - Global crashTolerance: 1008.34 - method: WeightedAverage [LOG 02:33:38.783] [WeldingTool] Part breakingTorque: 22 - Global breakingTorque: 1008.34 - method: WeightedAverage [LOG 02:33:38.783] [WeldingTool] Part maxTemp: 2000 - Global maxTemp: 2288.477 - method: WeightedAverage [LOG 02:33:38.783] [WeldingTool] Welding this part: WBI.Tundra400 [LOG 02:33:38.783] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.783] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.783] [WeldingTool] WBI.Tundra400 Attache mode SRF_ATTACH Attach method FIXED_JOINT [LOG 02:33:38.786] [WeldingTool] .Found 1 config files [LOG 02:33:38.786] [WeldingTool] ..Config WBI_Tundra400 has 1 MODEL node [LOG 02:33:38.786] [WeldingTool] ..MODEL url: WildBlueIndustries/Buffalo/Assets/Tundra400 [LOG 02:33:38.786] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.786] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.786] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.786] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.786] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.786] [WeldingTool] ..Childs count 2 [LOG 02:33:38.786] [WeldingTool] scaling info: rescaleFactor=1| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.786] [WeldingTool] ..newpart position (0.000, 19.025, 0.700) [LOG 02:33:38.786] [WeldingTool] ..newpart rotation (-0.707, 0.000, 0.000, -0.707) [LOG 02:33:38.786] [WeldingTool] ..newpart rotation.eulerAngles (90.000, 0.000, 0.000) [LOG 02:33:38.786] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 180.000, 270.000) [LOG 02:33:38.786] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.786] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.786] [WeldingTool] ..position (0.000, 19.025, 0.700) [LOG 02:33:38.786] [WeldingTool] ..rotation (90.000, 0.000, 0.000) [LOG 02:33:38.786] [WeldingTool] ..scale (1.000, 1.000, 1.000) [LOG 02:33:38.786] [WeldingTool] ..Part Part has 4 RESOURCE node [LOG 02:33:38.786] [WeldingTool] ..RESOURCE new: ElectricCharge 1000/1000 [LOG 02:33:38.786] [WeldingTool] ..RESOURCE add: Supplies 810.0001/810.0001 [LOG 02:33:38.786] [WeldingTool] ..RESOURCE add: Mulch 0/300 [LOG 02:33:38.786] [WeldingTool] ..RESOURCE new: Fertilizer 570/570 [LOG 02:33:38.786] [WeldingTool] ..Config WBI_Tundra400 has 9 MODULE node [LOG 02:33:38.786] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.786] [WeldingTool] | Module ready to add = True [LOG 02:33:38.786] [WeldingTool] | Module ready to add = True [LOG 02:33:38.786] [WeldingTool] | Module ready to add = True [LOG 02:33:38.786] [WeldingTool] | Module ready to add = True [LOG 02:33:38.786] [WeldingTool] | Module ready to add = True [LOG 02:33:38.786] [WeldingTool] | Module ready to add = True [LOG 02:33:38.787] [WeldingTool] | ModuleKISInventory Module already exists!!! [LOG 02:33:38.787] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.787] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.787] [WeldingTool] | ModuleKISInventory - name is string [LOG 02:33:38.787] [WeldingTool] | ModuleKISInventory - name is merged with value ModuleKISInventory [LOG 02:33:38.788] [WeldingTool] | ModuleKISInventory - maxVolume is float [LOG 02:33:38.788] [WeldingTool] | ModuleKISInventory - newValue - maxVolume = 400 [LOG 02:33:38.788] [WeldingTool] | ModuleKISInventory - existingValue - maxVolume = 16000 [LOG 02:33:38.788] [WeldingTool] | ModuleKISInventory - maxVolume - added [LOG 02:33:38.788] [WeldingTool] | ModuleKISInventory - maxVolume is merged with value 16400 [LOG 02:33:38.788] [WeldingTool] | ModuleKISInventory - externalAccess is bool [LOG 02:33:38.788] [WeldingTool] | ModuleKISInventory - externalAccess is merged with value True [LOG 02:33:38.788] [WeldingTool] | ModuleKISInventory - internalAccess is bool [LOG 02:33:38.788] [WeldingTool] | ModuleKISInventory - internalAccess is merged with value True [LOG 02:33:38.788] [WeldingTool] | ModuleKISInventory - slotsX is float [LOG 02:33:38.788] [WeldingTool] | ModuleKISInventory - newValue - slotsX = 6 [LOG 02:33:38.788] [WeldingTool] | ModuleKISInventory - existingValue - slotsX = 8 [LOG 02:33:38.788] [WeldingTool] | ModuleKISInventory - slotsX - added [LOG 02:33:38.788] [WeldingTool] | ModuleKISInventory - slotsX is merged with value 14 [LOG 02:33:38.788] [WeldingTool] | ModuleKISInventory - slotsY is float [LOG 02:33:38.788] [WeldingTool] | ModuleKISInventory - newValue - slotsY = 4 [LOG 02:33:38.788] [WeldingTool] | ModuleKISInventory - existingValue - slotsY = 5 [LOG 02:33:38.788] [WeldingTool] | ModuleKISInventory - slotsY - added [LOG 02:33:38.788] [WeldingTool] | ModuleKISInventory - slotsY is merged with value 9 [LOG 02:33:38.788] [WeldingTool] | ModuleKISInventory - slotSize is float [LOG 02:33:38.788] [WeldingTool] | ModuleKISInventory - newValue - slotSize = 50 [LOG 02:33:38.788] [WeldingTool] | ModuleKISInventory - existingValue - slotSize = 50 [LOG 02:33:38.788] [WeldingTool] | ModuleKISInventory - slotSize - added [LOG 02:33:38.788] [WeldingTool] | ModuleKISInventory - slotSize is merged with value 100 [LOG 02:33:38.788] [WeldingTool] | ModuleKISInventory - itemIconResolution is float [LOG 02:33:38.788] [WeldingTool] | ModuleKISInventory - newValue - itemIconResolution = 128 [LOG 02:33:38.788] [WeldingTool] | ModuleKISInventory - existingValue - itemIconResolution = 128 [LOG 02:33:38.788] [WeldingTool] | ModuleKISInventory - itemIconResolution - added [LOG 02:33:38.788] [WeldingTool] | ModuleKISInventory - itemIconResolution is merged with value 256 [LOG 02:33:38.788] [WeldingTool] | ModuleKISInventory - selfIconResolution is float [LOG 02:33:38.788] [WeldingTool] | ModuleKISInventory - newValue - selfIconResolution = 128 [LOG 02:33:38.788] [WeldingTool] | ModuleKISInventory - existingValue - selfIconResolution = 128 [LOG 02:33:38.788] [WeldingTool] | ModuleKISInventory - selfIconResolution - added [LOG 02:33:38.789] [WeldingTool] | ModuleKISInventory - selfIconResolution is merged with value 256 [LOG 02:33:38.789] [WeldingTool] | ModuleKISInventory - openSndPath is string [LOG 02:33:38.789] [WeldingTool] | ModuleKISInventory - openSndPath is merged with value KIS/Sounds/containerOpen [LOG 02:33:38.789] [WeldingTool] | ModuleKISInventory - closeSndPath is string [LOG 02:33:38.789] [WeldingTool] | ModuleKISInventory - closeSndPath is merged with value KIS/Sounds/containerClose [LOG 02:33:38.789] [WeldingTool] | ModuleKISInventory - defaultMoveSndPath is string [LOG 02:33:38.789] [WeldingTool] | ModuleKISInventory - defaultMoveSndPath is merged with value KIS/Sounds/itemMove [LOG 02:33:38.789] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.789] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.789] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.789] [WeldingTool] Values done [LOG 02:33:38.789] [WeldingTool] | Module ready to add = True [LOG 02:33:38.789] [WeldingTool] | Module ready to add = True [LOG 02:33:38.789] [WeldingTool] | Module ready to add = True [LOG 02:33:38.789] [WeldingTool] | Module ready to add = True [LOG 02:33:38.789] [WeldingTool] | Module ready to add = True [LOG 02:33:38.789] [WeldingTool] | Module ready to add = True [LOG 02:33:38.789] [WeldingTool] | Module ready to add = True [LOG 02:33:38.789] [WeldingTool] | Module ready to add = True [LOG 02:33:38.789] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] [WeldingTool] ..MODULE add: WBIConvertibleStorage [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] [WeldingTool] ..MODULE add: WBIResourceDistributor [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | ModuleResourceActions2 Module already exists!!! [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | Module ready to add = True [LOG 02:33:38.790] [WeldingTool] | OseModuleInventoryPreference Module already exists!!! [LOG 02:33:38.790] [WeldingTool] ..Config WBI_Tundra400 has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.790] [WeldingTool] ..Config WBI_Tundra400 has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.790] [WeldingTool] ..Config WBI_Tundra400 has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.790] [WeldingTool] ..Config WBI_Tundra400 has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.790] [WeldingTool] .Part WBI.Tundra400 has 4 Stack attach node(s) [LOG 02:33:38.790] [WeldingTool] ..set relative position =(0.000, 19.025, 0.700) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.790] [WeldingTool] .Stack Node Add: topWBI.Tundra4003 [LOG 02:33:38.790] [WeldingTool] ..set relative position =(0.000, 19.025, 0.700) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.790] [WeldingTool] .Stack Node Add: bottomWBI.Tundra4003 [LOG 02:33:38.790] [WeldingTool] ..set relative position =(0.000, 19.025, 0.700) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.790] [WeldingTool] .Stack Node Add: frontWBI.Tundra4003 [LOG 02:33:38.790] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.790] [WeldingTool] New Center of Mass: (0.0, 15.6, 0.1) [LOG 02:33:38.790] [WeldingTool] Part crashTolerance: 20 - Global crashTolerance: 31.4076 - method: WeightedAverage [LOG 02:33:38.790] [WeldingTool] Part crashTolerance: 50 - Global crashTolerance: 945.2202 - method: WeightedAverage [LOG 02:33:38.790] [WeldingTool] Part breakingTorque: 50 - Global breakingTorque: 945.2202 - method: WeightedAverage [LOG 02:33:38.790] [WeldingTool] Part maxTemp: 900 - Global maxTemp: 2197.027 - method: WeightedAverage [LOG 02:33:38.790] [WeldingTool] Welding this part: WBI.BuffaloSAS [LOG 02:33:38.790] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.790] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.790] [WeldingTool] WBI.BuffaloSAS Attache mode STACK Attach method FIXED_JOINT [LOG 02:33:38.793] [WeldingTool] .Found 1 config files [LOG 02:33:38.793] [WeldingTool] ..Config WBI_BuffaloSAS has 1 MODEL node [LOG 02:33:38.793] [WeldingTool] ..MODEL url: WildBlueIndustries/Buffalo/Assets/BuffaloSAS [LOG 02:33:38.793] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.793] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.793] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.793] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.793] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.793] [WeldingTool] ..Childs count 1 [LOG 02:33:38.793] [WeldingTool] scaling info: rescaleFactor=1| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.793] [WeldingTool] ..newpart position (0.000, 19.025, -0.251) [LOG 02:33:38.793] [WeldingTool] ..newpart rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.793] [WeldingTool] ..newpart rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.793] [WeldingTool] ..newpart rotation.localEulerAngles (270.000, 0.000, 0.000) [LOG 02:33:38.793] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.793] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.793] [WeldingTool] ..position (0.000, 19.025, -0.251) [LOG 02:33:38.793] [WeldingTool] ..rotation (0.000, 0.000, 0.000) [LOG 02:33:38.793] [WeldingTool] ..scale (1.000, 1.000, 1.000) [LOG 02:33:38.793] [WeldingTool] ..Part Part has 0 RESOURCE node [LOG 02:33:38.793] [WeldingTool] ..Config WBI_BuffaloSAS has 7 MODULE node [LOG 02:33:38.793] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.793] [WeldingTool] | Module ready to add = True [LOG 02:33:38.793] [WeldingTool] | Module ready to add = True [LOG 02:33:38.793] [WeldingTool] | Module ready to add = True [LOG 02:33:38.793] [WeldingTool] | Module ready to add = True [LOG 02:33:38.793] [WeldingTool] | Module ready to add = True [LOG 02:33:38.793] [WeldingTool] | Module ready to add = True [LOG 02:33:38.793] [WeldingTool] | Module ready to add = True [LOG 02:33:38.793] [WeldingTool] | Module ready to add = True [LOG 02:33:38.793] [WeldingTool] | Module ready to add = True [LOG 02:33:38.793] [WeldingTool] | Module ready to add = True [LOG 02:33:38.793] [WeldingTool] | Module ready to add = True [LOG 02:33:38.793] [WeldingTool] [WeldingTool] ..MODULE add: WBIMeshToggle [LOG 02:33:38.793] [WeldingTool] | Module ready to add = True [LOG 02:33:38.793] [WeldingTool] | Module ready to add = True [LOG 02:33:38.793] [WeldingTool] | Module ready to add = True [LOG 02:33:38.793] [WeldingTool] | Module ready to add = True [LOG 02:33:38.794] [WeldingTool] | Module ready to add = True [LOG 02:33:38.794] [WeldingTool] | Module ready to add = True [LOG 02:33:38.794] [WeldingTool] | Module ready to add = True [LOG 02:33:38.794] [WeldingTool] | Module ready to add = True [LOG 02:33:38.794] [WeldingTool] | Module ready to add = True [LOG 02:33:38.794] [WeldingTool] | Module ready to add = True [LOG 02:33:38.794] [WeldingTool] | Module ready to add = True [LOG 02:33:38.794] [WeldingTool] | Module ready to add = True [LOG 02:33:38.794] [WeldingTool] [WeldingTool] ..MODULE add: ModuleReactionWheel [LOG 02:33:38.794] [WeldingTool] | Module ready to add = True [LOG 02:33:38.794] [WeldingTool] | Module ready to add = True [LOG 02:33:38.794] [WeldingTool] | Module ready to add = True [LOG 02:33:38.794] [WeldingTool] | Module ready to add = True [LOG 02:33:38.794] [WeldingTool] | Module ready to add = True [LOG 02:33:38.794] [WeldingTool] | Module ready to add = True [LOG 02:33:38.794] [WeldingTool] | Module ready to add = True [LOG 02:33:38.794] [WeldingTool] | Module ready to add = True [LOG 02:33:38.794] [WeldingTool] | Module ready to add = True [LOG 02:33:38.794] [WeldingTool] | Module ready to add = True [LOG 02:33:38.794] [WeldingTool] | Module ready to add = True [LOG 02:33:38.794] [WeldingTool] | Module ready to add = True [LOG 02:33:38.794] [WeldingTool] | Module ready to add = True [LOG 02:33:38.794] [WeldingTool] [WeldingTool] ..MODULE add: AYA_SAS [LOG 02:33:38.794] [WeldingTool] | Module ready to add = True [LOG 02:33:38.794] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.794] [WeldingTool] | Module ready to add = True [LOG 02:33:38.794] [WeldingTool] | Module ready to add = True [LOG 02:33:38.794] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.794] [WeldingTool] | Module ready to add = True [LOG 02:33:38.794] [WeldingTool] | Module ready to add = True [LOG 02:33:38.794] [WeldingTool] | Module ready to add = True [LOG 02:33:38.794] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.794] [WeldingTool] | Module ready to add = True [LOG 02:33:38.794] [WeldingTool] | Module ready to add = True [LOG 02:33:38.794] [WeldingTool] | Module ready to add = True [LOG 02:33:38.794] [WeldingTool] | Module ready to add = True [LOG 02:33:38.794] [WeldingTool] | Module ready to add = True [LOG 02:33:38.794] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.794] [WeldingTool] ..Config WBI_BuffaloSAS has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.794] [WeldingTool] ..Config WBI_BuffaloSAS has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.794] [WeldingTool] ..Config WBI_BuffaloSAS has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.794] [WeldingTool] ..Config WBI_BuffaloSAS has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.794] [WeldingTool] .Part WBI.BuffaloSAS has 3 Stack attach node(s) [LOG 02:33:38.794] [WeldingTool] ..set relative position =(0.000, 19.025, -0.251) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.794] [WeldingTool] .Stack Node Add: backWBI.BuffaloSAS4 [LOG 02:33:38.794] [WeldingTool] ..set relative position =(0.000, 19.025, -0.251) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.794] [WeldingTool] .Stack Node Add: btmfrontWBI.BuffaloSAS4 [LOG 02:33:38.794] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.794] [WeldingTool] New Center of Mass: (0.0, 15.6, 0.1) [LOG 02:33:38.794] [WeldingTool] Part crashTolerance: 20 - Global crashTolerance: 31.04391 - method: WeightedAverage [LOG 02:33:38.794] [WeldingTool] Part crashTolerance: 50 - Global crashTolerance: 916.6788 - method: WeightedAverage [LOG 02:33:38.794] [WeldingTool] Part breakingTorque: 50 - Global breakingTorque: 916.6788 - method: WeightedAverage [LOG 02:33:38.794] [WeldingTool] Part maxTemp: 900 - Global maxTemp: 2155.675 - method: WeightedAverage [LOG 02:33:38.794] [WeldingTool] Welding this part: LS.Tank.125 [LOG 02:33:38.794] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.794] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.794] [WeldingTool] LS.Tank.125 Attache mode STACK Attach method FIXED_JOINT [LOG 02:33:38.797] [WeldingTool] .Found 1 config files [LOG 02:33:38.797] [WeldingTool] ..Config LS_Tank_125 has 1 MODEL node [LOG 02:33:38.797] [WeldingTool] ..MODEL url: UmbraSpaceIndustries/LifeSupport/Assets/Tank_125 [LOG 02:33:38.797] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.797] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.797] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.797] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.797] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.797] [WeldingTool] ..Childs count 1 [LOG 02:33:38.797] [WeldingTool] scaling info: rescaleFactor=1| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.797] [WeldingTool] ..newpart position (-2.250, 17.425, 0.600) [LOG 02:33:38.797] [WeldingTool] ..newpart rotation (0.000, 0.000, -0.707, 0.707) [LOG 02:33:38.797] [WeldingTool] ..newpart rotation.eulerAngles (0.000, 0.000, 270.000) [LOG 02:33:38.797] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 270.000, 180.000) [LOG 02:33:38.797] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.797] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.797] [WeldingTool] ..position (-2.250, 17.425, 0.600) [LOG 02:33:38.797] [WeldingTool] ..rotation (0.000, 0.000, 270.000) [LOG 02:33:38.797] [WeldingTool] ..scale (1.000, 1.000, 1.000) [LOG 02:33:38.797] [WeldingTool] ..Part Part has 2 RESOURCE node [LOG 02:33:38.797] [WeldingTool] ..RESOURCE add: Supplies 500/500 [LOG 02:33:38.797] [WeldingTool] ..RESOURCE add: Mulch 0/10 [LOG 02:33:38.797] [WeldingTool] ..Config LS_Tank_125 has 6 MODULE node [LOG 02:33:38.797] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.797] [WeldingTool] | Module ready to add = True [LOG 02:33:38.797] [WeldingTool] | Module ready to add = True [LOG 02:33:38.797] [WeldingTool] | Module ready to add = True [LOG 02:33:38.797] [WeldingTool] | Module ready to add = True [LOG 02:33:38.797] [WeldingTool] | Module ready to add = True [LOG 02:33:38.797] [WeldingTool] | Module ready to add = True [LOG 02:33:38.798] [WeldingTool] | Module ready to add = True [LOG 02:33:38.798] [WeldingTool] | Module ready to add = True [LOG 02:33:38.798] [WeldingTool] | Module ready to add = True [LOG 02:33:38.798] [WeldingTool] | Module ready to add = True [LOG 02:33:38.798] [WeldingTool] | Module ready to add = True [LOG 02:33:38.798] [WeldingTool] | Module ready to add = True [LOG 02:33:38.798] [WeldingTool] | Module ready to add = True [LOG 02:33:38.798] [WeldingTool] | Module ready to add = True [LOG 02:33:38.798] [WeldingTool] | Module ready to add = True [LOG 02:33:38.798] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.798] [WeldingTool] | Module ready to add = True [LOG 02:33:38.798] [WeldingTool] | Module ready to add = True [LOG 02:33:38.798] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.798] [WeldingTool] | Module ready to add = True [LOG 02:33:38.798] [WeldingTool] | Module ready to add = True [LOG 02:33:38.798] [WeldingTool] | Module ready to add = True [LOG 02:33:38.798] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.798] [WeldingTool] | Module ready to add = True [LOG 02:33:38.798] [WeldingTool] | Module ready to add = True [LOG 02:33:38.798] [WeldingTool] | Module ready to add = True [LOG 02:33:38.798] [WeldingTool] | Module ready to add = True [LOG 02:33:38.798] [WeldingTool] | Module ready to add = True [LOG 02:33:38.798] [WeldingTool] | Module ready to add = True [LOG 02:33:38.798] [WeldingTool] | Module ready to add = True [LOG 02:33:38.798] [WeldingTool] | Module ready to add = True [LOG 02:33:38.798] [WeldingTool] | ModuleResourceActions2 Module already exists!!! [LOG 02:33:38.798] [WeldingTool] | Module ready to add = True [LOG 02:33:38.798] [WeldingTool] | Module ready to add = True [LOG 02:33:38.798] [WeldingTool] | Module ready to add = True [LOG 02:33:38.798] [WeldingTool] | Module ready to add = True [LOG 02:33:38.798] [WeldingTool] | Module ready to add = True [LOG 02:33:38.798] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.798] [WeldingTool] ..Config LS_Tank_125 has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.798] [WeldingTool] ..Config LS_Tank_125 has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.798] [WeldingTool] ..Config LS_Tank_125 has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.798] [WeldingTool] ..Config LS_Tank_125 has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.798] [WeldingTool] .Part LS.Tank.125 has 2 Stack attach node(s) [LOG 02:33:38.798] [WeldingTool] ..set relative position =(-2.250, 17.425, 0.600) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.798] [WeldingTool] .Stack Node Add: bottomLS.Tank.1255 [LOG 02:33:38.798] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.798] [WeldingTool] New Center of Mass: (0.0, 15.7, 0.1) [LOG 02:33:38.798] [WeldingTool] Part crashTolerance: 7 - Global crashTolerance: 30.6137 - method: WeightedAverage [LOG 02:33:38.798] [WeldingTool] Part crashTolerance: 22 - Global crashTolerance: 900.6709 - method: WeightedAverage [LOG 02:33:38.798] [WeldingTool] Part breakingTorque: 22 - Global breakingTorque: 900.6709 - method: WeightedAverage [LOG 02:33:38.798] [WeldingTool] Part maxTemp: 2000 - Global maxTemp: 2152.89 - method: WeightedAverage [LOG 02:33:38.798] [WeldingTool] Welding this part: WBI.Tundra400 [LOG 02:33:38.798] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.798] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.798] [WeldingTool] WBI.Tundra400 Attache mode SRF_ATTACH Attach method FIXED_JOINT [LOG 02:33:38.801] [WeldingTool] .Found 1 config files [LOG 02:33:38.801] [WeldingTool] ..Config WBI_Tundra400 has 1 MODEL node [LOG 02:33:38.801] [WeldingTool] ..MODEL url: WildBlueIndustries/Buffalo/Assets/Tundra400 [LOG 02:33:38.801] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.801] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.801] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.801] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.801] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.801] [WeldingTool] ..Childs count 2 [LOG 02:33:38.801] [WeldingTool] scaling info: rescaleFactor=1| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.801] [WeldingTool] ..newpart position (-1.700, 19.025, 0.700) [LOG 02:33:38.801] [WeldingTool] ..newpart rotation (-0.707, 0.000, 0.000, -0.707) [LOG 02:33:38.801] [WeldingTool] ..newpart rotation.eulerAngles (90.000, 0.000, 0.000) [LOG 02:33:38.801] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 180.000, 270.000) [LOG 02:33:38.801] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.801] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.801] [WeldingTool] ..position (-1.700, 19.025, 0.700) [LOG 02:33:38.801] [WeldingTool] ..rotation (90.000, 0.000, 0.000) [LOG 02:33:38.801] [WeldingTool] ..scale (1.000, 1.000, 1.000) [LOG 02:33:38.801] [WeldingTool] ..Part Part has 4 RESOURCE node [LOG 02:33:38.801] [WeldingTool] ..RESOURCE add: ElectricCharge 1000/1000 [LOG 02:33:38.801] [WeldingTool] ..RESOURCE add: Supplies 810.0001/810.0001 [LOG 02:33:38.801] [WeldingTool] ..RESOURCE add: Mulch 0/300 [LOG 02:33:38.801] [WeldingTool] ..RESOURCE add: Fertilizer 570/570 [LOG 02:33:38.801] [WeldingTool] ..Config WBI_Tundra400 has 9 MODULE node [LOG 02:33:38.801] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.801] [WeldingTool] | Module ready to add = True [LOG 02:33:38.801] [WeldingTool] | Module ready to add = True [LOG 02:33:38.801] [WeldingTool] | Module ready to add = True [LOG 02:33:38.801] [WeldingTool] | Module ready to add = True [LOG 02:33:38.801] [WeldingTool] | Module ready to add = True [LOG 02:33:38.801] [WeldingTool] | Module ready to add = True [LOG 02:33:38.801] [WeldingTool] | ModuleKISInventory Module already exists!!! [LOG 02:33:38.801] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.801] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.801] [WeldingTool] | ModuleKISInventory - name is string [LOG 02:33:38.801] [WeldingTool] | ModuleKISInventory - name is merged with value ModuleKISInventory [LOG 02:33:38.801] [WeldingTool] | ModuleKISInventory - maxVolume is float [LOG 02:33:38.801] [WeldingTool] | ModuleKISInventory - newValue - maxVolume = 400 [LOG 02:33:38.801] [WeldingTool] | ModuleKISInventory - existingValue - maxVolume = 16400 [LOG 02:33:38.801] [WeldingTool] | ModuleKISInventory - maxVolume - added [LOG 02:33:38.801] [WeldingTool] | ModuleKISInventory - maxVolume is merged with value 16800 [LOG 02:33:38.801] [WeldingTool] | ModuleKISInventory - externalAccess is bool [LOG 02:33:38.801] [WeldingTool] | ModuleKISInventory - externalAccess is merged with value True [LOG 02:33:38.801] [WeldingTool] | ModuleKISInventory - internalAccess is bool [LOG 02:33:38.801] [WeldingTool] | ModuleKISInventory - internalAccess is merged with value True [LOG 02:33:38.801] [WeldingTool] | ModuleKISInventory - slotsX is float [LOG 02:33:38.801] [WeldingTool] | ModuleKISInventory - newValue - slotsX = 6 [LOG 02:33:38.801] [WeldingTool] | ModuleKISInventory - existingValue - slotsX = 14 [LOG 02:33:38.801] [WeldingTool] | ModuleKISInventory - slotsX - added [LOG 02:33:38.801] [WeldingTool] | ModuleKISInventory - slotsX is merged with value 20 [LOG 02:33:38.801] [WeldingTool] | ModuleKISInventory - slotsY is float [LOG 02:33:38.802] [WeldingTool] | ModuleKISInventory - newValue - slotsY = 4 [LOG 02:33:38.802] [WeldingTool] | ModuleKISInventory - existingValue - slotsY = 9 [LOG 02:33:38.802] [WeldingTool] | ModuleKISInventory - slotsY - added [LOG 02:33:38.802] [WeldingTool] | ModuleKISInventory - slotsY is merged with value 13 [LOG 02:33:38.802] [WeldingTool] | ModuleKISInventory - slotSize is float [LOG 02:33:38.802] [WeldingTool] | ModuleKISInventory - newValue - slotSize = 50 [LOG 02:33:38.802] [WeldingTool] | ModuleKISInventory - existingValue - slotSize = 100 [LOG 02:33:38.802] [WeldingTool] | ModuleKISInventory - slotSize - added [LOG 02:33:38.802] [WeldingTool] | ModuleKISInventory - slotSize is merged with value 150 [LOG 02:33:38.802] [WeldingTool] | ModuleKISInventory - itemIconResolution is float [LOG 02:33:38.802] [WeldingTool] | ModuleKISInventory - newValue - itemIconResolution = 128 [LOG 02:33:38.802] [WeldingTool] | ModuleKISInventory - existingValue - itemIconResolution = 256 [LOG 02:33:38.802] [WeldingTool] | ModuleKISInventory - itemIconResolution - added [LOG 02:33:38.802] [WeldingTool] | ModuleKISInventory - itemIconResolution is merged with value 384 [LOG 02:33:38.802] [WeldingTool] | ModuleKISInventory - selfIconResolution is float [LOG 02:33:38.802] [WeldingTool] | ModuleKISInventory - newValue - selfIconResolution = 128 [LOG 02:33:38.802] [WeldingTool] | ModuleKISInventory - existingValue - selfIconResolution = 256 [LOG 02:33:38.802] [WeldingTool] | ModuleKISInventory - selfIconResolution - added [LOG 02:33:38.802] [WeldingTool] | ModuleKISInventory - selfIconResolution is merged with value 384 [LOG 02:33:38.802] [WeldingTool] | ModuleKISInventory - openSndPath is string [LOG 02:33:38.802] [WeldingTool] | ModuleKISInventory - openSndPath is merged with value KIS/Sounds/containerOpen [LOG 02:33:38.802] [WeldingTool] | ModuleKISInventory - closeSndPath is string [LOG 02:33:38.802] [WeldingTool] | ModuleKISInventory - closeSndPath is merged with value KIS/Sounds/containerClose [LOG 02:33:38.802] [WeldingTool] | ModuleKISInventory - defaultMoveSndPath is string [LOG 02:33:38.802] [WeldingTool] | ModuleKISInventory - defaultMoveSndPath is merged with value KIS/Sounds/itemMove [LOG 02:33:38.802] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.802] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.802] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.802] [WeldingTool] Values done [LOG 02:33:38.802] [WeldingTool] | Module ready to add = True [LOG 02:33:38.802] [WeldingTool] | Module ready to add = True [LOG 02:33:38.802] [WeldingTool] | Module ready to add = True [LOG 02:33:38.802] [WeldingTool] | Module ready to add = True [LOG 02:33:38.802] [WeldingTool] | Module ready to add = True [LOG 02:33:38.802] [WeldingTool] | Module ready to add = True [LOG 02:33:38.802] [WeldingTool] | Module ready to add = True [LOG 02:33:38.802] [WeldingTool] | Module ready to add = True [LOG 02:33:38.802] [WeldingTool] | Module ready to add = True [LOG 02:33:38.802] [WeldingTool] | WBIConvertibleStorage Module already exists!!! [LOG 02:33:38.802] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.802] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.802] [WeldingTool] | WBIConvertibleStorage - name is string [LOG 02:33:38.802] [WeldingTool] | WBIConvertibleStorage - name is merged with value WBIConvertibleStorage [LOG 02:33:38.802] [WeldingTool] | WBIConvertibleStorage - enableLogging is bool [LOG 02:33:38.802] [WeldingTool] | WBIConvertibleStorage - enableLogging is merged with value True [LOG 02:33:38.802] [WeldingTool] | WBIConvertibleStorage - fieldReconfigurable is bool [LOG 02:33:38.802] [WeldingTool] | WBIConvertibleStorage - fieldReconfigurable is merged with value True [LOG 02:33:38.802] [WeldingTool] | WBIConvertibleStorage - confirmResourceSwitch is bool [LOG 02:33:38.802] [WeldingTool] | WBIConvertibleStorage - confirmResourceSwitch is merged with value True [LOG 02:33:38.802] [WeldingTool] | WBIConvertibleStorage - showGUI is bool [LOG 02:33:38.802] [WeldingTool] | WBIConvertibleStorage - showGUI is merged with value True [LOG 02:33:38.802] [WeldingTool] | WBIConvertibleStorage - defaultTemplate is string [LOG 02:33:38.802] [WeldingTool] | WBIConvertibleStorage - defaultTemplate is merged with value LFO [LOG 02:33:38.802] [WeldingTool] | WBIConvertibleStorage - templateNodes is string [LOG 02:33:38.802] [WeldingTool] | WBIConvertibleStorage - templateNodes is merged with value KONSTRUCTION_TEMPLATE;STORAGE_TEMPLATE [LOG 02:33:38.802] [WeldingTool] | WBIConvertibleStorage - resourcesToKeep is string [LOG 02:33:38.802] [WeldingTool] | WBIConvertibleStorage - resourcesToKeep is merged with value ElectricCharge [LOG 02:33:38.802] [WeldingTool] | WBIConvertibleStorage - capacityFactor is float [LOG 02:33:38.802] [WeldingTool] | WBIConvertibleStorage - newValue - capacityFactor = 0.3 [LOG 02:33:38.802] [WeldingTool] | WBIConvertibleStorage - existingValue - capacityFactor = 0.3 [LOG 02:33:38.802] [WeldingTool] | WBIConvertibleStorage - capacityFactor - added [LOG 02:33:38.802] [WeldingTool] | WBIConvertibleStorage - capacityFactor is merged with value 0.6 [LOG 02:33:38.802] [WeldingTool] | WBIConvertibleStorage - baseStorage is float [LOG 02:33:38.802] [WeldingTool] | WBIConvertibleStorage - newValue - baseStorage = 400 [LOG 02:33:38.802] [WeldingTool] | WBIConvertibleStorage - existingValue - baseStorage = 400 [LOG 02:33:38.802] [WeldingTool] | WBIConvertibleStorage - baseStorage - added [LOG 02:33:38.802] [WeldingTool] | WBIConvertibleStorage - baseStorage is merged with value 800 [LOG 02:33:38.802] [WeldingTool] | WBIConvertibleStorage - maxStorage is float [LOG 02:33:38.802] [WeldingTool] | WBIConvertibleStorage - newValue - maxStorage = 3000 [LOG 02:33:38.802] [WeldingTool] | WBIConvertibleStorage - existingValue - maxStorage = 3000 [LOG 02:33:38.802] [WeldingTool] | WBIConvertibleStorage - maxStorage - added [LOG 02:33:38.802] [WeldingTool] | WBIConvertibleStorage - maxStorage is merged with value 6000 [LOG 02:33:38.802] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.802] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.802] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.802] [WeldingTool] Values done [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | WBIResourceDistributor Module already exists!!! [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | ModuleResourceActions2 Module already exists!!! [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | Module ready to add = True [LOG 02:33:38.803] [WeldingTool] | OseModuleInventoryPreference Module already exists!!! [LOG 02:33:38.803] [WeldingTool] ..Config WBI_Tundra400 has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.803] [WeldingTool] ..Config WBI_Tundra400 has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.803] [WeldingTool] ..Config WBI_Tundra400 has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.803] [WeldingTool] ..Config WBI_Tundra400 has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.803] [WeldingTool] .Part WBI.Tundra400 has 4 Stack attach node(s) [LOG 02:33:38.803] [WeldingTool] ..set relative position =(-1.700, 19.025, 0.700) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.803] [WeldingTool] .Stack Node Add: topWBI.Tundra4006 [LOG 02:33:38.803] [WeldingTool] ..set relative position =(-1.700, 19.025, 0.700) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.803] [WeldingTool] .Stack Node Add: bottomWBI.Tundra4006 [LOG 02:33:38.803] [WeldingTool] ..set relative position =(-1.700, 19.025, 0.700) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.803] [WeldingTool] .Stack Node Add: frontWBI.Tundra4006 [LOG 02:33:38.803] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.803] [WeldingTool] New Center of Mass: (-0.1, 15.9, 0.1) [LOG 02:33:38.803] [WeldingTool] Part crashTolerance: 20 - Global crashTolerance: 29.98821 - method: WeightedAverage [LOG 02:33:38.803] [WeldingTool] Part crashTolerance: 50 - Global crashTolerance: 850.5388 - method: WeightedAverage [LOG 02:33:38.803] [WeldingTool] Part breakingTorque: 50 - Global breakingTorque: 850.5388 - method: WeightedAverage [LOG 02:33:38.803] [WeldingTool] Part maxTemp: 900 - Global maxTemp: 2079.054 - method: WeightedAverage [LOG 02:33:38.803] [WeldingTool] Welding this part: WBI.BuffaloSAS [LOG 02:33:38.803] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.803] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.803] [WeldingTool] WBI.BuffaloSAS Attache mode STACK Attach method FIXED_JOINT [LOG 02:33:38.806] [WeldingTool] .Found 1 config files [LOG 02:33:38.806] [WeldingTool] ..Config WBI_BuffaloSAS has 1 MODEL node [LOG 02:33:38.806] [WeldingTool] ..MODEL url: WildBlueIndustries/Buffalo/Assets/BuffaloSAS [LOG 02:33:38.806] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.806] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.806] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.806] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.806] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.806] [WeldingTool] ..Childs count 1 [LOG 02:33:38.806] [WeldingTool] scaling info: rescaleFactor=1| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.806] [WeldingTool] ..newpart position (-1.700, 19.025, -0.251) [LOG 02:33:38.806] [WeldingTool] ..newpart rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.806] [WeldingTool] ..newpart rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.806] [WeldingTool] ..newpart rotation.localEulerAngles (270.000, 0.000, 0.000) [LOG 02:33:38.806] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.806] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.806] [WeldingTool] ..position (-1.700, 19.025, -0.251) [LOG 02:33:38.806] [WeldingTool] ..rotation (0.000, 0.000, 0.000) [LOG 02:33:38.806] [WeldingTool] ..scale (1.000, 1.000, 1.000) [LOG 02:33:38.806] [WeldingTool] ..Part Part has 0 RESOURCE node [LOG 02:33:38.806] [WeldingTool] ..Config WBI_BuffaloSAS has 7 MODULE node [LOG 02:33:38.806] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.806] [WeldingTool] | Module ready to add = True [LOG 02:33:38.806] [WeldingTool] | Module ready to add = True [LOG 02:33:38.806] [WeldingTool] | Module ready to add = True [LOG 02:33:38.806] [WeldingTool] | Module ready to add = True [LOG 02:33:38.806] [WeldingTool] | Module ready to add = True [LOG 02:33:38.806] [WeldingTool] | Module ready to add = True [LOG 02:33:38.806] [WeldingTool] | Module ready to add = True [LOG 02:33:38.806] [WeldingTool] | Module ready to add = True [LOG 02:33:38.806] [WeldingTool] | Module ready to add = True [LOG 02:33:38.806] [WeldingTool] | Module ready to add = True [LOG 02:33:38.806] [WeldingTool] | Module ready to add = True [LOG 02:33:38.806] [WeldingTool] | WBIMeshToggle Module already exists!!! [LOG 02:33:38.806] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.806] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.806] [WeldingTool] | WBIMeshToggle - name is string [LOG 02:33:38.806] [WeldingTool] | WBIMeshToggle - name is merged with value WBIMeshToggle [LOG 02:33:38.806] [WeldingTool] | WBIMeshToggle - objects is string [LOG 02:33:38.806] [WeldingTool] | WBIMeshToggle - objects is merged with value MiniChassis [LOG 02:33:38.806] [WeldingTool] | WBIMeshToggle - showMeshesName is string [LOG 02:33:38.806] [WeldingTool] | WBIMeshToggle - showMeshesName is merged with value Add Chassis [LOG 02:33:38.806] [WeldingTool] | WBIMeshToggle - hideMeshesName is string [LOG 02:33:38.806] [WeldingTool] | WBIMeshToggle - hideMeshesName is merged with value Remove Chassis [LOG 02:33:38.806] [WeldingTool] | WBIMeshToggle - guiVisible is bool [LOG 02:33:38.807] [WeldingTool] | WBIMeshToggle - guiVisible is merged with value True [LOG 02:33:38.807] [WeldingTool] | WBIMeshToggle - meshesVisible is bool [LOG 02:33:38.807] [WeldingTool] | WBIMeshToggle - meshesVisible is merged with value False [LOG 02:33:38.807] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.807] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.807] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.807] [WeldingTool] Values done [LOG 02:33:38.807] [WeldingTool] | Module ready to add = True [LOG 02:33:38.807] [WeldingTool] | Module ready to add = True [LOG 02:33:38.807] [WeldingTool] | Module ready to add = True [LOG 02:33:38.807] [WeldingTool] | Module ready to add = True [LOG 02:33:38.807] [WeldingTool] | Module ready to add = True [LOG 02:33:38.807] [WeldingTool] | Module ready to add = True [LOG 02:33:38.807] [WeldingTool] | Module ready to add = True [LOG 02:33:38.807] [WeldingTool] | Module ready to add = True [LOG 02:33:38.807] [WeldingTool] | Module ready to add = True [LOG 02:33:38.807] [WeldingTool] | Module ready to add = True [LOG 02:33:38.807] [WeldingTool] | Module ready to add = True [LOG 02:33:38.807] [WeldingTool] | Module ready to add = True [LOG 02:33:38.807] [WeldingTool] | ModuleReactionWheel Module already exists!!! [LOG 02:33:38.807] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.807] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.807] [WeldingTool] | ModuleReactionWheel - name is string [LOG 02:33:38.807] [WeldingTool] | ModuleReactionWheel - name is merged with value ModuleReactionWheel [LOG 02:33:38.807] [WeldingTool] | ModuleReactionWheel - PitchTorque is float [LOG 02:33:38.807] [WeldingTool] | ModuleReactionWheel - newValue - PitchTorque = 15 [LOG 02:33:38.807] [WeldingTool] | ModuleReactionWheel - existingValue - PitchTorque = 15 [LOG 02:33:38.807] [WeldingTool] | ModuleReactionWheel - PitchTorque - added [LOG 02:33:38.807] [WeldingTool] | ModuleReactionWheel - PitchTorque is merged with value 30 [LOG 02:33:38.807] [WeldingTool] | ModuleReactionWheel - YawTorque is float [LOG 02:33:38.807] [WeldingTool] | ModuleReactionWheel - newValue - YawTorque = 15 [LOG 02:33:38.807] [WeldingTool] | ModuleReactionWheel - existingValue - YawTorque = 15 [LOG 02:33:38.807] [WeldingTool] | ModuleReactionWheel - YawTorque - added [LOG 02:33:38.807] [WeldingTool] | ModuleReactionWheel - YawTorque is merged with value 30 [LOG 02:33:38.807] [WeldingTool] | ModuleReactionWheel - RollTorque is float [LOG 02:33:38.807] [WeldingTool] | ModuleReactionWheel - newValue - RollTorque = 15 [LOG 02:33:38.807] [WeldingTool] | ModuleReactionWheel - existingValue - RollTorque = 15 [LOG 02:33:38.807] [WeldingTool] | ModuleReactionWheel - RollTorque - added [LOG 02:33:38.807] [WeldingTool] | ModuleReactionWheel - RollTorque is merged with value 30 [LOG 02:33:38.807] [WeldingTool] | ModuleReactionWheel - torqueResponseSpeed is float [LOG 02:33:38.807] [WeldingTool] | ModuleReactionWheel - newValue - torqueResponseSpeed = 15 [LOG 02:33:38.807] [WeldingTool] | ModuleReactionWheel - existingValue - torqueResponseSpeed = 15 [LOG 02:33:38.807] [WeldingTool] | ModuleReactionWheel - torqueResponseSpeed - maximized [LOG 02:33:38.807] [WeldingTool] | ModuleReactionWheel - torqueResponseSpeed is merged with value 15 [LOG 02:33:38.807] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.807] [WeldingTool] | SubModule BreakingAttributes found = 0 [LOG 02:33:38.807] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.807] [WeldingTool] | ElectricCharge - name is string [LOG 02:33:38.807] [WeldingTool] | ElectricCharge - name is merged with value ElectricCharge [LOG 02:33:38.807] [WeldingTool] | ElectricCharge - rate is float [LOG 02:33:38.807] [WeldingTool] | ElectricCharge - newValue - rate = 0.45 [LOG 02:33:38.807] [WeldingTool] | ElectricCharge - existingValue - rate = 0.45 [LOG 02:33:38.807] [WeldingTool] | ElectricCharge - rate - added [LOG 02:33:38.807] [WeldingTool] | ElectricCharge - rate is merged with value 0.9 [LOG 02:33:38.807] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.807] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.807] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.807] [WeldingTool] Values done [LOG 02:33:38.807] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.807] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.807] [WeldingTool] Values done [LOG 02:33:38.807] [WeldingTool] | Module ready to add = True [LOG 02:33:38.807] [WeldingTool] | Module ready to add = True [LOG 02:33:38.807] [WeldingTool] | Module ready to add = True [LOG 02:33:38.807] [WeldingTool] | Module ready to add = True [LOG 02:33:38.807] [WeldingTool] | Module ready to add = True [LOG 02:33:38.807] [WeldingTool] | Module ready to add = True [LOG 02:33:38.807] [WeldingTool] | Module ready to add = True [LOG 02:33:38.807] [WeldingTool] | Module ready to add = True [LOG 02:33:38.807] [WeldingTool] | Module ready to add = True [LOG 02:33:38.807] [WeldingTool] | Module ready to add = True [LOG 02:33:38.807] [WeldingTool] | Module ready to add = True [LOG 02:33:38.807] [WeldingTool] | Module ready to add = True [LOG 02:33:38.807] [WeldingTool] | Module ready to add = True [LOG 02:33:38.807] [WeldingTool] | AYA_SAS Module already exists!!! [LOG 02:33:38.807] [WeldingTool] | Module ready to add = True [LOG 02:33:38.807] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.807] [WeldingTool] | Module ready to add = True [LOG 02:33:38.807] [WeldingTool] | Module ready to add = True [LOG 02:33:38.807] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.807] [WeldingTool] | Module ready to add = True [LOG 02:33:38.807] [WeldingTool] | Module ready to add = True [LOG 02:33:38.807] [WeldingTool] | Module ready to add = True [LOG 02:33:38.807] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.807] [WeldingTool] | Module ready to add = True [LOG 02:33:38.808] [WeldingTool] | Module ready to add = True [LOG 02:33:38.808] [WeldingTool] | Module ready to add = True [LOG 02:33:38.808] [WeldingTool] | Module ready to add = True [LOG 02:33:38.808] [WeldingTool] | Module ready to add = True [LOG 02:33:38.808] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.808] [WeldingTool] ..Config WBI_BuffaloSAS has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.808] [WeldingTool] ..Config WBI_BuffaloSAS has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.808] [WeldingTool] ..Config WBI_BuffaloSAS has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.808] [WeldingTool] ..Config WBI_BuffaloSAS has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.808] [WeldingTool] .Part WBI.BuffaloSAS has 3 Stack attach node(s) [LOG 02:33:38.808] [WeldingTool] ..set relative position =(-1.700, 19.025, -0.251) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.808] [WeldingTool] .Stack Node Add: backWBI.BuffaloSAS7 [LOG 02:33:38.808] [WeldingTool] ..set relative position =(-1.700, 19.025, -0.251) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.808] [WeldingTool] .Stack Node Add: btmfrontWBI.BuffaloSAS7 [LOG 02:33:38.808] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.808] [WeldingTool] New Center of Mass: (-0.1, 15.9, 0.1) [LOG 02:33:38.808] [WeldingTool] Part crashTolerance: 20 - Global crashTolerance: 29.70232 - method: WeightedAverage [LOG 02:33:38.808] [WeldingTool] Part crashTolerance: 50 - Global crashTolerance: 827.6251 - method: WeightedAverage [LOG 02:33:38.808] [WeldingTool] Part breakingTorque: 50 - Global breakingTorque: 827.6251 - method: WeightedAverage [LOG 02:33:38.808] [WeldingTool] Part maxTemp: 900 - Global maxTemp: 2045.306 - method: WeightedAverage [LOG 02:33:38.808] [WeldingTool] Welding this part: WBI.Tundra400 [LOG 02:33:38.808] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.808] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.808] [WeldingTool] WBI.Tundra400 Attache mode SRF_ATTACH Attach method FIXED_JOINT [LOG 02:33:38.810] [WeldingTool] .Found 1 config files [LOG 02:33:38.810] [WeldingTool] ..Config WBI_Tundra400 has 1 MODEL node [LOG 02:33:38.811] [WeldingTool] ..MODEL url: WildBlueIndustries/Buffalo/Assets/Tundra400 [LOG 02:33:38.811] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.811] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.811] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.811] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.811] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.811] [WeldingTool] ..Childs count 2 [LOG 02:33:38.811] [WeldingTool] scaling info: rescaleFactor=1| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.811] [WeldingTool] ..newpart position (1.700, 19.025, 0.700) [LOG 02:33:38.811] [WeldingTool] ..newpart rotation (-0.707, 0.000, 0.000, -0.707) [LOG 02:33:38.811] [WeldingTool] ..newpart rotation.eulerAngles (90.000, 0.000, 0.000) [LOG 02:33:38.811] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 180.000, 270.000) [LOG 02:33:38.811] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.811] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.811] [WeldingTool] ..position (1.700, 19.025, 0.700) [LOG 02:33:38.811] [WeldingTool] ..rotation (90.000, 0.000, 0.000) [LOG 02:33:38.811] [WeldingTool] ..scale (1.000, 1.000, 1.000) [LOG 02:33:38.811] [WeldingTool] ..Part Part has 4 RESOURCE node [LOG 02:33:38.811] [WeldingTool] ..RESOURCE add: ElectricCharge 1000/1000 [LOG 02:33:38.811] [WeldingTool] ..RESOURCE add: Supplies 810.0001/810.0001 [LOG 02:33:38.811] [WeldingTool] ..RESOURCE add: Mulch 0/300 [LOG 02:33:38.811] [WeldingTool] ..RESOURCE add: Fertilizer 570/570 [LOG 02:33:38.811] [WeldingTool] ..Config WBI_Tundra400 has 9 MODULE node [LOG 02:33:38.811] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.811] [WeldingTool] | Module ready to add = True [LOG 02:33:38.811] [WeldingTool] | Module ready to add = True [LOG 02:33:38.811] [WeldingTool] | Module ready to add = True [LOG 02:33:38.811] [WeldingTool] | Module ready to add = True [LOG 02:33:38.811] [WeldingTool] | Module ready to add = True [LOG 02:33:38.811] [WeldingTool] | Module ready to add = True [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory Module already exists!!! [LOG 02:33:38.811] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.811] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - name is string [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - name is merged with value ModuleKISInventory [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - maxVolume is float [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - newValue - maxVolume = 400 [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - existingValue - maxVolume = 16800 [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - maxVolume - added [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - maxVolume is merged with value 17200 [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - externalAccess is bool [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - externalAccess is merged with value True [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - internalAccess is bool [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - internalAccess is merged with value True [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - slotsX is float [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - newValue - slotsX = 6 [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - existingValue - slotsX = 20 [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - slotsX - added [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - slotsX is merged with value 26 [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - slotsY is float [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - newValue - slotsY = 4 [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - existingValue - slotsY = 13 [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - slotsY - added [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - slotsY is merged with value 17 [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - slotSize is float [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - newValue - slotSize = 50 [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - existingValue - slotSize = 150 [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - slotSize - added [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - slotSize is merged with value 200 [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - itemIconResolution is float [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - newValue - itemIconResolution = 128 [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - existingValue - itemIconResolution = 384 [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - itemIconResolution - added [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - itemIconResolution is merged with value 512 [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - selfIconResolution is float [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - newValue - selfIconResolution = 128 [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - existingValue - selfIconResolution = 384 [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - selfIconResolution - added [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - selfIconResolution is merged with value 512 [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - openSndPath is string [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - openSndPath is merged with value KIS/Sounds/containerOpen [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - closeSndPath is string [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - closeSndPath is merged with value KIS/Sounds/containerClose [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - defaultMoveSndPath is string [LOG 02:33:38.811] [WeldingTool] | ModuleKISInventory - defaultMoveSndPath is merged with value KIS/Sounds/itemMove [LOG 02:33:38.811] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.811] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.811] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.811] [WeldingTool] Values done [LOG 02:33:38.811] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | WBIConvertibleStorage Module already exists!!! [LOG 02:33:38.812] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.812] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.812] [WeldingTool] | WBIConvertibleStorage - name is string [LOG 02:33:38.812] [WeldingTool] | WBIConvertibleStorage - name is merged with value WBIConvertibleStorage [LOG 02:33:38.812] [WeldingTool] | WBIConvertibleStorage - enableLogging is bool [LOG 02:33:38.812] [WeldingTool] | WBIConvertibleStorage - enableLogging is merged with value True [LOG 02:33:38.812] [WeldingTool] | WBIConvertibleStorage - fieldReconfigurable is bool [LOG 02:33:38.812] [WeldingTool] | WBIConvertibleStorage - fieldReconfigurable is merged with value True [LOG 02:33:38.812] [WeldingTool] | WBIConvertibleStorage - confirmResourceSwitch is bool [LOG 02:33:38.812] [WeldingTool] | WBIConvertibleStorage - confirmResourceSwitch is merged with value True [LOG 02:33:38.812] [WeldingTool] | WBIConvertibleStorage - showGUI is bool [LOG 02:33:38.812] [WeldingTool] | WBIConvertibleStorage - showGUI is merged with value True [LOG 02:33:38.812] [WeldingTool] | WBIConvertibleStorage - defaultTemplate is string [LOG 02:33:38.812] [WeldingTool] | WBIConvertibleStorage - defaultTemplate is merged with value LFO [LOG 02:33:38.812] [WeldingTool] | WBIConvertibleStorage - templateNodes is string [LOG 02:33:38.812] [WeldingTool] | WBIConvertibleStorage - templateNodes is merged with value KONSTRUCTION_TEMPLATE;STORAGE_TEMPLATE [LOG 02:33:38.812] [WeldingTool] | WBIConvertibleStorage - resourcesToKeep is string [LOG 02:33:38.812] [WeldingTool] | WBIConvertibleStorage - resourcesToKeep is merged with value ElectricCharge [LOG 02:33:38.812] [WeldingTool] | WBIConvertibleStorage - capacityFactor is float [LOG 02:33:38.812] [WeldingTool] | WBIConvertibleStorage - newValue - capacityFactor = 0.3 [LOG 02:33:38.812] [WeldingTool] | WBIConvertibleStorage - existingValue - capacityFactor = 0.6 [LOG 02:33:38.812] [WeldingTool] | WBIConvertibleStorage - capacityFactor - added [LOG 02:33:38.812] [WeldingTool] | WBIConvertibleStorage - capacityFactor is merged with value 0.9 [LOG 02:33:38.812] [WeldingTool] | WBIConvertibleStorage - baseStorage is float [LOG 02:33:38.812] [WeldingTool] | WBIConvertibleStorage - newValue - baseStorage = 400 [LOG 02:33:38.812] [WeldingTool] | WBIConvertibleStorage - existingValue - baseStorage = 800 [LOG 02:33:38.812] [WeldingTool] | WBIConvertibleStorage - baseStorage - added [LOG 02:33:38.812] [WeldingTool] | WBIConvertibleStorage - baseStorage is merged with value 1200 [LOG 02:33:38.812] [WeldingTool] | WBIConvertibleStorage - maxStorage is float [LOG 02:33:38.812] [WeldingTool] | WBIConvertibleStorage - newValue - maxStorage = 3000 [LOG 02:33:38.812] [WeldingTool] | WBIConvertibleStorage - existingValue - maxStorage = 6000 [LOG 02:33:38.812] [WeldingTool] | WBIConvertibleStorage - maxStorage - added [LOG 02:33:38.812] [WeldingTool] | WBIConvertibleStorage - maxStorage is merged with value 9000 [LOG 02:33:38.812] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.812] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.812] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.812] [WeldingTool] Values done [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | WBIResourceDistributor Module already exists!!! [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | ModuleResourceActions2 Module already exists!!! [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | Module ready to add = True [LOG 02:33:38.812] [WeldingTool] | OseModuleInventoryPreference Module already exists!!! [LOG 02:33:38.812] [WeldingTool] ..Config WBI_Tundra400 has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.812] [WeldingTool] ..Config WBI_Tundra400 has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.812] [WeldingTool] ..Config WBI_Tundra400 has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.813] [WeldingTool] ..Config WBI_Tundra400 has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.813] [WeldingTool] .Part WBI.Tundra400 has 4 Stack attach node(s) [LOG 02:33:38.813] [WeldingTool] ..set relative position =(1.700, 19.025, 0.700) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.813] [WeldingTool] .Stack Node Add: topWBI.Tundra4008 [LOG 02:33:38.813] [WeldingTool] ..set relative position =(1.700, 19.025, 0.700) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.813] [WeldingTool] .Stack Node Add: bottomWBI.Tundra4008 [LOG 02:33:38.813] [WeldingTool] ..set relative position =(1.700, 19.025, 0.700) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.813] [WeldingTool] .Stack Node Add: frontWBI.Tundra4008 [LOG 02:33:38.813] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.813] [WeldingTool] New Center of Mass: (0.0, 16.0, 0.2) [LOG 02:33:38.813] [WeldingTool] Part crashTolerance: 20 - Global crashTolerance: 29.17698 - method: WeightedAverage [LOG 02:33:38.813] [WeldingTool] Part crashTolerance: 50 - Global crashTolerance: 785.5198 - method: WeightedAverage [LOG 02:33:38.813] [WeldingTool] Part breakingTorque: 50 - Global breakingTorque: 785.5198 - method: WeightedAverage [LOG 02:33:38.813] [WeldingTool] Part maxTemp: 900 - Global maxTemp: 1983.292 - method: WeightedAverage [LOG 02:33:38.813] [WeldingTool] Welding this part: WBI.BuffaloSAS [LOG 02:33:38.813] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.813] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.813] [WeldingTool] WBI.BuffaloSAS Attache mode STACK Attach method FIXED_JOINT [LOG 02:33:38.815] [WeldingTool] .Found 1 config files [LOG 02:33:38.815] [WeldingTool] ..Config WBI_BuffaloSAS has 1 MODEL node [LOG 02:33:38.815] [WeldingTool] ..MODEL url: WildBlueIndustries/Buffalo/Assets/BuffaloSAS [LOG 02:33:38.815] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.815] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.815] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.815] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.815] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.815] [WeldingTool] ..Childs count 1 [LOG 02:33:38.815] [WeldingTool] scaling info: rescaleFactor=1| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.815] [WeldingTool] ..newpart position (1.700, 19.025, -0.251) [LOG 02:33:38.815] [WeldingTool] ..newpart rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.815] [WeldingTool] ..newpart rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.815] [WeldingTool] ..newpart rotation.localEulerAngles (270.000, 0.000, 0.000) [LOG 02:33:38.815] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.816] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.816] [WeldingTool] ..position (1.700, 19.025, -0.251) [LOG 02:33:38.816] [WeldingTool] ..rotation (0.000, 0.000, 0.000) [LOG 02:33:38.816] [WeldingTool] ..scale (1.000, 1.000, 1.000) [LOG 02:33:38.816] [WeldingTool] ..Part Part has 0 RESOURCE node [LOG 02:33:38.816] [WeldingTool] ..Config WBI_BuffaloSAS has 7 MODULE node [LOG 02:33:38.816] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.816] [WeldingTool] | Module ready to add = True [LOG 02:33:38.816] [WeldingTool] | Module ready to add = True [LOG 02:33:38.816] [WeldingTool] | Module ready to add = True [LOG 02:33:38.816] [WeldingTool] | Module ready to add = True [LOG 02:33:38.816] [WeldingTool] | Module ready to add = True [LOG 02:33:38.816] [WeldingTool] | Module ready to add = True [LOG 02:33:38.816] [WeldingTool] | Module ready to add = True [LOG 02:33:38.816] [WeldingTool] | Module ready to add = True [LOG 02:33:38.816] [WeldingTool] | Module ready to add = True [LOG 02:33:38.816] [WeldingTool] | Module ready to add = True [LOG 02:33:38.816] [WeldingTool] | Module ready to add = True [LOG 02:33:38.816] [WeldingTool] | WBIMeshToggle Module already exists!!! [LOG 02:33:38.816] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.816] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.816] [WeldingTool] | WBIMeshToggle - name is string [LOG 02:33:38.816] [WeldingTool] | WBIMeshToggle - name is merged with value WBIMeshToggle [LOG 02:33:38.816] [WeldingTool] | WBIMeshToggle - objects is string [LOG 02:33:38.816] [WeldingTool] | WBIMeshToggle - objects is merged with value MiniChassis [LOG 02:33:38.816] [WeldingTool] | WBIMeshToggle - showMeshesName is string [LOG 02:33:38.816] [WeldingTool] | WBIMeshToggle - showMeshesName is merged with value Add Chassis [LOG 02:33:38.816] [WeldingTool] | WBIMeshToggle - hideMeshesName is string [LOG 02:33:38.816] [WeldingTool] | WBIMeshToggle - hideMeshesName is merged with value Remove Chassis [LOG 02:33:38.816] [WeldingTool] | WBIMeshToggle - guiVisible is bool [LOG 02:33:38.816] [WeldingTool] | WBIMeshToggle - guiVisible is merged with value True [LOG 02:33:38.816] [WeldingTool] | WBIMeshToggle - meshesVisible is bool [LOG 02:33:38.816] [WeldingTool] | WBIMeshToggle - meshesVisible is merged with value False [LOG 02:33:38.816] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.816] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.816] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.816] [WeldingTool] Values done [LOG 02:33:38.816] [WeldingTool] | Module ready to add = True [LOG 02:33:38.816] [WeldingTool] | Module ready to add = True [LOG 02:33:38.816] [WeldingTool] | Module ready to add = True [LOG 02:33:38.816] [WeldingTool] | Module ready to add = True [LOG 02:33:38.816] [WeldingTool] | Module ready to add = True [LOG 02:33:38.816] [WeldingTool] | Module ready to add = True [LOG 02:33:38.816] [WeldingTool] | Module ready to add = True [LOG 02:33:38.816] [WeldingTool] | Module ready to add = True [LOG 02:33:38.816] [WeldingTool] | Module ready to add = True [LOG 02:33:38.816] [WeldingTool] | Module ready to add = True [LOG 02:33:38.816] [WeldingTool] | Module ready to add = True [LOG 02:33:38.816] [WeldingTool] | Module ready to add = True [LOG 02:33:38.816] [WeldingTool] | ModuleReactionWheel Module already exists!!! [LOG 02:33:38.816] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.816] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.816] [WeldingTool] | ModuleReactionWheel - name is string [LOG 02:33:38.816] [WeldingTool] | ModuleReactionWheel - name is merged with value ModuleReactionWheel [LOG 02:33:38.816] [WeldingTool] | ModuleReactionWheel - PitchTorque is float [LOG 02:33:38.816] [WeldingTool] | ModuleReactionWheel - newValue - PitchTorque = 15 [LOG 02:33:38.816] [WeldingTool] | ModuleReactionWheel - existingValue - PitchTorque = 30 [LOG 02:33:38.816] [WeldingTool] | ModuleReactionWheel - PitchTorque - added [LOG 02:33:38.816] [WeldingTool] | ModuleReactionWheel - PitchTorque is merged with value 45 [LOG 02:33:38.816] [WeldingTool] | ModuleReactionWheel - YawTorque is float [LOG 02:33:38.816] [WeldingTool] | ModuleReactionWheel - newValue - YawTorque = 15 [LOG 02:33:38.816] [WeldingTool] | ModuleReactionWheel - existingValue - YawTorque = 30 [LOG 02:33:38.816] [WeldingTool] | ModuleReactionWheel - YawTorque - added [LOG 02:33:38.816] [WeldingTool] | ModuleReactionWheel - YawTorque is merged with value 45 [LOG 02:33:38.816] [WeldingTool] | ModuleReactionWheel - RollTorque is float [LOG 02:33:38.816] [WeldingTool] | ModuleReactionWheel - newValue - RollTorque = 15 [LOG 02:33:38.816] [WeldingTool] | ModuleReactionWheel - existingValue - RollTorque = 30 [LOG 02:33:38.816] [WeldingTool] | ModuleReactionWheel - RollTorque - added [LOG 02:33:38.816] [WeldingTool] | ModuleReactionWheel - RollTorque is merged with value 45 [LOG 02:33:38.816] [WeldingTool] | ModuleReactionWheel - torqueResponseSpeed is float [LOG 02:33:38.816] [WeldingTool] | ModuleReactionWheel - newValue - torqueResponseSpeed = 15 [LOG 02:33:38.816] [WeldingTool] | ModuleReactionWheel - existingValue - torqueResponseSpeed = 15 [LOG 02:33:38.816] [WeldingTool] | ModuleReactionWheel - torqueResponseSpeed - maximized [LOG 02:33:38.816] [WeldingTool] | ModuleReactionWheel - torqueResponseSpeed is merged with value 15 [LOG 02:33:38.816] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.816] [WeldingTool] | SubModule BreakingAttributes found = 0 [LOG 02:33:38.816] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.816] [WeldingTool] | ElectricCharge - name is string [LOG 02:33:38.816] [WeldingTool] | ElectricCharge - name is merged with value ElectricCharge [LOG 02:33:38.816] [WeldingTool] | ElectricCharge - rate is float [LOG 02:33:38.816] [WeldingTool] | ElectricCharge - newValue - rate = 0.45 [LOG 02:33:38.816] [WeldingTool] | ElectricCharge - existingValue - rate = 0.9 [LOG 02:33:38.816] [WeldingTool] | ElectricCharge - rate - added [LOG 02:33:38.816] [WeldingTool] | ElectricCharge - rate is merged with value 1.35 [LOG 02:33:38.816] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.816] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.816] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.816] [WeldingTool] Values done [LOG 02:33:38.816] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.816] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.816] [WeldingTool] Values done [LOG 02:33:38.817] [WeldingTool] | Module ready to add = True [LOG 02:33:38.817] [WeldingTool] | Module ready to add = True [LOG 02:33:38.817] [WeldingTool] | Module ready to add = True [LOG 02:33:38.817] [WeldingTool] | Module ready to add = True [LOG 02:33:38.817] [WeldingTool] | Module ready to add = True [LOG 02:33:38.817] [WeldingTool] | Module ready to add = True [LOG 02:33:38.817] [WeldingTool] | Module ready to add = True [LOG 02:33:38.817] [WeldingTool] | Module ready to add = True [LOG 02:33:38.817] [WeldingTool] | Module ready to add = True [LOG 02:33:38.817] [WeldingTool] | Module ready to add = True [LOG 02:33:38.817] [WeldingTool] | Module ready to add = True [LOG 02:33:38.817] [WeldingTool] | Module ready to add = True [LOG 02:33:38.817] [WeldingTool] | Module ready to add = True [LOG 02:33:38.817] [WeldingTool] | AYA_SAS Module already exists!!! [LOG 02:33:38.817] [WeldingTool] | Module ready to add = True [LOG 02:33:38.817] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.817] [WeldingTool] | Module ready to add = True [LOG 02:33:38.817] [WeldingTool] | Module ready to add = True [LOG 02:33:38.817] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.817] [WeldingTool] | Module ready to add = True [LOG 02:33:38.817] [WeldingTool] | Module ready to add = True [LOG 02:33:38.817] [WeldingTool] | Module ready to add = True [LOG 02:33:38.817] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.817] [WeldingTool] | Module ready to add = True [LOG 02:33:38.817] [WeldingTool] | Module ready to add = True [LOG 02:33:38.817] [WeldingTool] | Module ready to add = True [LOG 02:33:38.817] [WeldingTool] | Module ready to add = True [LOG 02:33:38.817] [WeldingTool] | Module ready to add = True [LOG 02:33:38.817] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.817] [WeldingTool] ..Config WBI_BuffaloSAS has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.817] [WeldingTool] ..Config WBI_BuffaloSAS has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.817] [WeldingTool] ..Config WBI_BuffaloSAS has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.817] [WeldingTool] ..Config WBI_BuffaloSAS has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.817] [WeldingTool] .Part WBI.BuffaloSAS has 3 Stack attach node(s) [LOG 02:33:38.817] [WeldingTool] ..set relative position =(1.700, 19.025, -0.251) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.817] [WeldingTool] .Stack Node Add: backWBI.BuffaloSAS9 [LOG 02:33:38.817] [WeldingTool] ..set relative position =(1.700, 19.025, -0.251) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.817] [WeldingTool] .Stack Node Add: btmfrontWBI.BuffaloSAS9 [LOG 02:33:38.817] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.817] [WeldingTool] New Center of Mass: (0.0, 16.1, 0.2) [LOG 02:33:38.817] [WeldingTool] Part crashTolerance: 20 - Global crashTolerance: 28.93508 - method: WeightedAverage [LOG 02:33:38.817] [WeldingTool] Part crashTolerance: 50 - Global crashTolerance: 766.1319 - method: WeightedAverage [LOG 02:33:38.817] [WeldingTool] Part breakingTorque: 50 - Global breakingTorque: 766.1319 - method: WeightedAverage [LOG 02:33:38.817] [WeldingTool] Part maxTemp: 900 - Global maxTemp: 1954.737 - method: WeightedAverage [LOG 02:33:38.817] [WeldingTool] Welding this part: battery-125 [LOG 02:33:38.817] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.817] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.817] [WeldingTool] battery-125 Attache mode SRF_ATTACH Attach method FIXED_JOINT [LOG 02:33:38.819] [WeldingTool] .Found 1 config files [LOG 02:33:38.819] [WeldingTool] ..Config battery-125 has no MODEL node [LOG 02:33:38.820] [WeldingTool] ..MODEL url: NearFutureElectrical/Parts/Batteries/battery-125/battery-125 [LOG 02:33:38.820] [WeldingTool] scaling info: rescaleFactor=1| vector=(1.000, 1.000, 1.000) [LOG 02:33:38.820] [WeldingTool] ..newpart position (1.800, 16.925, -1.000) [LOG 02:33:38.820] [WeldingTool] ..newpart rotation (-1.000, 0.000, 0.000, 0.000) [LOG 02:33:38.820] [WeldingTool] ..newpart rotation.eulerAngles (0.000, 180.000, 180.000) [LOG 02:33:38.820] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 180.000, 180.000) [LOG 02:33:38.820] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.820] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.820] [WeldingTool] ..position (1.800, 16.925, -1.000) [LOG 02:33:38.820] [WeldingTool] ..rotation (0.000, 180.000, 180.000) [LOG 02:33:38.820] [WeldingTool] ..scale (1.000, 1.000, 1.000) [LOG 02:33:38.820] [WeldingTool] ..Part Part has 1 RESOURCE node [LOG 02:33:38.820] [WeldingTool] ..RESOURCE add: ElectricCharge 6400/6400 [LOG 02:33:38.820] [WeldingTool] ..Config battery-125 has 6 MODULE node [LOG 02:33:38.820] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.820] [WeldingTool] | Module ready to add = True [LOG 02:33:38.820] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.820] [WeldingTool] | Module ready to add = True [LOG 02:33:38.820] [WeldingTool] | Module ready to add = True [LOG 02:33:38.820] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.820] [WeldingTool] | Module ready to add = True [LOG 02:33:38.820] [WeldingTool] | Module ready to add = True [LOG 02:33:38.820] [WeldingTool] | Module ready to add = True [LOG 02:33:38.821] [WeldingTool] | Module ready to add = True [LOG 02:33:38.821] [WeldingTool] | Module ready to add = True [LOG 02:33:38.821] [WeldingTool] | Module ready to add = True [LOG 02:33:38.821] [WeldingTool] | Module ready to add = True [LOG 02:33:38.821] [WeldingTool] | Module ready to add = True [LOG 02:33:38.821] [WeldingTool] | Module ready to add = True [LOG 02:33:38.821] [WeldingTool] | Module ready to add = True [LOG 02:33:38.821] [WeldingTool] | Module ready to add = True [LOG 02:33:38.821] [WeldingTool] | Module ready to add = True [LOG 02:33:38.821] [WeldingTool] | Module ready to add = True [LOG 02:33:38.821] [WeldingTool] | Module ready to add = True [LOG 02:33:38.821] [WeldingTool] | Module ready to add = True [LOG 02:33:38.821] [WeldingTool] | Module ready to add = True [LOG 02:33:38.821] [WeldingTool] | Module ready to add = True [LOG 02:33:38.821] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.821] [WeldingTool] | Module ready to add = True [LOG 02:33:38.821] [WeldingTool] | Module ready to add = True [LOG 02:33:38.821] [WeldingTool] | Module ready to add = True [LOG 02:33:38.821] [WeldingTool] | Module ready to add = True [LOG 02:33:38.821] [WeldingTool] | Module ready to add = True [LOG 02:33:38.821] [WeldingTool] | Module ready to add = True [LOG 02:33:38.821] [WeldingTool] | Module ready to add = True [LOG 02:33:38.821] [WeldingTool] | Module ready to add = True [LOG 02:33:38.821] [WeldingTool] | ModuleResourceActions2 Module already exists!!! [LOG 02:33:38.821] [WeldingTool] | Module ready to add = True [LOG 02:33:38.821] [WeldingTool] | Module ready to add = True [LOG 02:33:38.821] [WeldingTool] | Module ready to add = True [LOG 02:33:38.821] [WeldingTool] | Module ready to add = True [LOG 02:33:38.821] [WeldingTool] | Module ready to add = True [LOG 02:33:38.821] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.821] [WeldingTool] ..Config battery-125 has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.821] [WeldingTool] ..Config battery-125 has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.821] [WeldingTool] ..Config battery-125 has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.821] [WeldingTool] ..Config battery-125 has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.821] [WeldingTool] .Part battery-125 has 2 Stack attach node(s) [LOG 02:33:38.821] [WeldingTool] ..set relative position =(1.800, 16.925, -1.000) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.821] [WeldingTool] .Stack Node Add: topbattery-12510 [LOG 02:33:38.821] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.821] [WeldingTool] New Center of Mass: (0.0, 16.1, 0.2) [LOG 02:33:38.821] [WeldingTool] Part crashTolerance: 8 - Global crashTolerance: 27.97241 - method: WeightedAverage [LOG 02:33:38.821] [WeldingTool] Part crashTolerance: 22 - Global crashTolerance: 731.914 - method: WeightedAverage [LOG 02:33:38.821] [WeldingTool] Part breakingTorque: 22 - Global breakingTorque: 731.914 - method: WeightedAverage [LOG 02:33:38.821] [WeldingTool] Part maxTemp: 2000 - Global maxTemp: 1956.818 - method: WeightedAverage [LOG 02:33:38.821] [WeldingTool] Welding this part: battery-125 [LOG 02:33:38.821] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.821] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.821] [WeldingTool] battery-125 Attache mode STACK Attach method FIXED_JOINT [LOG 02:33:38.824] [WeldingTool] .Found 1 config files [LOG 02:33:38.824] [WeldingTool] ..Config battery-125 has no MODEL node [LOG 02:33:38.824] [WeldingTool] ..MODEL url: NearFutureElectrical/Parts/Batteries/battery-125/battery-125 [LOG 02:33:38.824] [WeldingTool] scaling info: rescaleFactor=1| vector=(1.000, 1.000, 1.000) [LOG 02:33:38.824] [WeldingTool] ..newpart position (1.800, 17.945, -1.000) [LOG 02:33:38.824] [WeldingTool] ..newpart rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.824] [WeldingTool] ..newpart rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.824] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 180.000, 180.000) [LOG 02:33:38.824] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.824] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.824] [WeldingTool] ..position (1.800, 17.945, -1.000) [LOG 02:33:38.824] [WeldingTool] ..rotation (0.000, 0.000, 0.000) [LOG 02:33:38.824] [WeldingTool] ..scale (1.000, 1.000, 1.000) [LOG 02:33:38.824] [WeldingTool] ..Part Part has 1 RESOURCE node [LOG 02:33:38.824] [WeldingTool] ..RESOURCE add: ElectricCharge 6400/6400 [LOG 02:33:38.824] [WeldingTool] ..Config battery-125 has 6 MODULE node [LOG 02:33:38.824] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.824] [WeldingTool] | Module ready to add = True [LOG 02:33:38.824] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.824] [WeldingTool] | Module ready to add = True [LOG 02:33:38.824] [WeldingTool] | Module ready to add = True [LOG 02:33:38.824] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.824] [WeldingTool] | Module ready to add = True [LOG 02:33:38.824] [WeldingTool] | Module ready to add = True [LOG 02:33:38.824] [WeldingTool] | Module ready to add = True [LOG 02:33:38.824] [WeldingTool] | Module ready to add = True [LOG 02:33:38.824] [WeldingTool] | Module ready to add = True [LOG 02:33:38.824] [WeldingTool] | Module ready to add = True [LOG 02:33:38.824] [WeldingTool] | Module ready to add = True [LOG 02:33:38.824] [WeldingTool] | Module ready to add = True [LOG 02:33:38.824] [WeldingTool] | Module ready to add = True [LOG 02:33:38.824] [WeldingTool] | Module ready to add = True [LOG 02:33:38.824] [WeldingTool] | Module ready to add = True [LOG 02:33:38.824] [WeldingTool] | Module ready to add = True [LOG 02:33:38.824] [WeldingTool] | Module ready to add = True [LOG 02:33:38.824] [WeldingTool] | Module ready to add = True [LOG 02:33:38.824] [WeldingTool] | Module ready to add = True [LOG 02:33:38.824] [WeldingTool] | Module ready to add = True [LOG 02:33:38.824] [WeldingTool] | Module ready to add = True [LOG 02:33:38.824] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.824] [WeldingTool] | Module ready to add = True [LOG 02:33:38.824] [WeldingTool] | Module ready to add = True [LOG 02:33:38.824] [WeldingTool] | Module ready to add = True [LOG 02:33:38.824] [WeldingTool] | Module ready to add = True [LOG 02:33:38.824] [WeldingTool] | Module ready to add = True [LOG 02:33:38.824] [WeldingTool] | Module ready to add = True [LOG 02:33:38.824] [WeldingTool] | Module ready to add = True [LOG 02:33:38.824] [WeldingTool] | Module ready to add = True [LOG 02:33:38.824] [WeldingTool] | ModuleResourceActions2 Module already exists!!! [LOG 02:33:38.824] [WeldingTool] | Module ready to add = True [LOG 02:33:38.824] [WeldingTool] | Module ready to add = True [LOG 02:33:38.824] [WeldingTool] | Module ready to add = True [LOG 02:33:38.824] [WeldingTool] | Module ready to add = True [LOG 02:33:38.824] [WeldingTool] | Module ready to add = True [LOG 02:33:38.824] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.824] [WeldingTool] ..Config battery-125 has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.824] [WeldingTool] ..Config battery-125 has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.824] [WeldingTool] ..Config battery-125 has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.824] [WeldingTool] ..Config battery-125 has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.824] [WeldingTool] .Part battery-125 has 2 Stack attach node(s) [LOG 02:33:38.824] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.824] [WeldingTool] New Center of Mass: (0.0, 16.1, 0.1) [LOG 02:33:38.824] [WeldingTool] Part crashTolerance: 8 - Global crashTolerance: 27.09438 - method: WeightedAverage [LOG 02:33:38.824] [WeldingTool] Part crashTolerance: 22 - Global crashTolerance: 700.7047 - method: WeightedAverage [LOG 02:33:38.824] [WeldingTool] Part breakingTorque: 22 - Global breakingTorque: 700.7047 - method: WeightedAverage [LOG 02:33:38.824] [WeldingTool] Part maxTemp: 2000 - Global maxTemp: 1958.717 - method: WeightedAverage [LOG 02:33:38.825] [WeldingTool] Welding this part: battery-125 [LOG 02:33:38.825] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.825] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.825] [WeldingTool] battery-125 Attache mode STACK Attach method FIXED_JOINT [LOG 02:33:38.827] [WeldingTool] .Found 1 config files [LOG 02:33:38.827] [WeldingTool] ..Config battery-125 has no MODEL node [LOG 02:33:38.827] [WeldingTool] ..MODEL url: NearFutureElectrical/Parts/Batteries/battery-125/battery-125 [LOG 02:33:38.827] [WeldingTool] scaling info: rescaleFactor=1| vector=(1.000, 1.000, 1.000) [LOG 02:33:38.827] [WeldingTool] ..newpart position (1.800, 18.965, -1.000) [LOG 02:33:38.827] [WeldingTool] ..newpart rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.827] [WeldingTool] ..newpart rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.827] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.827] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.827] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.827] [WeldingTool] ..position (1.800, 18.965, -1.000) [LOG 02:33:38.827] [WeldingTool] ..rotation (0.000, 0.000, 0.000) [LOG 02:33:38.827] [WeldingTool] ..scale (1.000, 1.000, 1.000) [LOG 02:33:38.827] [WeldingTool] ..Part Part has 1 RESOURCE node [LOG 02:33:38.827] [WeldingTool] ..RESOURCE add: ElectricCharge 6400/6400 [LOG 02:33:38.827] [WeldingTool] ..Config battery-125 has 6 MODULE node [LOG 02:33:38.827] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.827] [WeldingTool] | Module ready to add = True [LOG 02:33:38.827] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.827] [WeldingTool] | Module ready to add = True [LOG 02:33:38.827] [WeldingTool] | Module ready to add = True [LOG 02:33:38.827] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.827] [WeldingTool] | Module ready to add = True [LOG 02:33:38.827] [WeldingTool] | Module ready to add = True [LOG 02:33:38.827] [WeldingTool] | Module ready to add = True [LOG 02:33:38.827] [WeldingTool] | Module ready to add = True [LOG 02:33:38.827] [WeldingTool] | Module ready to add = True [LOG 02:33:38.827] [WeldingTool] | Module ready to add = True [LOG 02:33:38.827] [WeldingTool] | Module ready to add = True [LOG 02:33:38.827] [WeldingTool] | Module ready to add = True [LOG 02:33:38.827] [WeldingTool] | Module ready to add = True [LOG 02:33:38.827] [WeldingTool] | Module ready to add = True [LOG 02:33:38.827] [WeldingTool] | Module ready to add = True [LOG 02:33:38.827] [WeldingTool] | Module ready to add = True [LOG 02:33:38.827] [WeldingTool] | Module ready to add = True [LOG 02:33:38.827] [WeldingTool] | Module ready to add = True [LOG 02:33:38.827] [WeldingTool] | Module ready to add = True [LOG 02:33:38.827] [WeldingTool] | Module ready to add = True [LOG 02:33:38.827] [WeldingTool] | Module ready to add = True [LOG 02:33:38.827] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.827] [WeldingTool] | Module ready to add = True [LOG 02:33:38.827] [WeldingTool] | Module ready to add = True [LOG 02:33:38.827] [WeldingTool] | Module ready to add = True [LOG 02:33:38.827] [WeldingTool] | Module ready to add = True [LOG 02:33:38.827] [WeldingTool] | Module ready to add = True [LOG 02:33:38.827] [WeldingTool] | Module ready to add = True [LOG 02:33:38.827] [WeldingTool] | Module ready to add = True [LOG 02:33:38.827] [WeldingTool] | Module ready to add = True [LOG 02:33:38.827] [WeldingTool] | ModuleResourceActions2 Module already exists!!! [LOG 02:33:38.827] [WeldingTool] | Module ready to add = True [LOG 02:33:38.827] [WeldingTool] | Module ready to add = True [LOG 02:33:38.827] [WeldingTool] | Module ready to add = True [LOG 02:33:38.827] [WeldingTool] | Module ready to add = True [LOG 02:33:38.827] [WeldingTool] | Module ready to add = True [LOG 02:33:38.827] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.827] [WeldingTool] ..Config battery-125 has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.827] [WeldingTool] ..Config battery-125 has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.827] [WeldingTool] ..Config battery-125 has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.827] [WeldingTool] ..Config battery-125 has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.827] [WeldingTool] .Part battery-125 has 2 Stack attach node(s) [LOG 02:33:38.827] [WeldingTool] ..set relative position =(1.800, 18.965, -1.000) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.827] [WeldingTool] .Stack Node Add: topbattery-12512 [LOG 02:33:38.827] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.828] [WeldingTool] New Center of Mass: (0.1, 16.1, 0.1) [LOG 02:33:38.828] [WeldingTool] Part crashTolerance: 8 - Global crashTolerance: 26.2903 - method: WeightedAverage [LOG 02:33:38.828] [WeldingTool] Part crashTolerance: 22 - Global crashTolerance: 672.1239 - method: WeightedAverage [LOG 02:33:38.828] [WeldingTool] Part breakingTorque: 22 - Global breakingTorque: 672.1239 - method: WeightedAverage [LOG 02:33:38.828] [WeldingTool] Part maxTemp: 2000 - Global maxTemp: 1960.455 - method: WeightedAverage [LOG 02:33:38.828] [WeldingTool] Welding this part: battery-125 [LOG 02:33:38.828] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.828] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.828] [WeldingTool] battery-125 Attache mode SRF_ATTACH Attach method FIXED_JOINT [LOG 02:33:38.830] [WeldingTool] .Found 1 config files [LOG 02:33:38.830] [WeldingTool] ..Config battery-125 has no MODEL node [LOG 02:33:38.830] [WeldingTool] ..MODEL url: NearFutureElectrical/Parts/Batteries/battery-125/battery-125 [LOG 02:33:38.830] [WeldingTool] scaling info: rescaleFactor=1| vector=(1.000, 1.000, 1.000) [LOG 02:33:38.830] [WeldingTool] ..newpart position (-1.800, 16.925, -1.000) [LOG 02:33:38.830] [WeldingTool] ..newpart rotation (-1.000, 0.000, 0.000, 0.000) [LOG 02:33:38.830] [WeldingTool] ..newpart rotation.eulerAngles (0.000, 180.000, 180.000) [LOG 02:33:38.830] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 180.000, 180.000) [LOG 02:33:38.830] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.830] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.830] [WeldingTool] ..position (-1.800, 16.925, -1.000) [LOG 02:33:38.830] [WeldingTool] ..rotation (0.000, 180.000, 180.000) [LOG 02:33:38.830] [WeldingTool] ..scale (1.000, 1.000, 1.000) [LOG 02:33:38.830] [WeldingTool] ..Part Part has 1 RESOURCE node [LOG 02:33:38.830] [WeldingTool] ..RESOURCE add: ElectricCharge 6400/6400 [LOG 02:33:38.830] [WeldingTool] ..Config battery-125 has 6 MODULE node [LOG 02:33:38.830] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.830] [WeldingTool] | Module ready to add = True [LOG 02:33:38.830] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.830] [WeldingTool] | Module ready to add = True [LOG 02:33:38.830] [WeldingTool] | Module ready to add = True [LOG 02:33:38.830] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.830] [WeldingTool] | Module ready to add = True [LOG 02:33:38.830] [WeldingTool] | Module ready to add = True [LOG 02:33:38.830] [WeldingTool] | Module ready to add = True [LOG 02:33:38.830] [WeldingTool] | Module ready to add = True [LOG 02:33:38.830] [WeldingTool] | Module ready to add = True [LOG 02:33:38.830] [WeldingTool] | Module ready to add = True [LOG 02:33:38.830] [WeldingTool] | Module ready to add = True [LOG 02:33:38.830] [WeldingTool] | Module ready to add = True [LOG 02:33:38.830] [WeldingTool] | Module ready to add = True [LOG 02:33:38.830] [WeldingTool] | Module ready to add = True [LOG 02:33:38.830] [WeldingTool] | Module ready to add = True [LOG 02:33:38.830] [WeldingTool] | Module ready to add = True [LOG 02:33:38.830] [WeldingTool] | Module ready to add = True [LOG 02:33:38.830] [WeldingTool] | Module ready to add = True [LOG 02:33:38.830] [WeldingTool] | Module ready to add = True [LOG 02:33:38.830] [WeldingTool] | Module ready to add = True [LOG 02:33:38.830] [WeldingTool] | Module ready to add = True [LOG 02:33:38.830] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.830] [WeldingTool] | Module ready to add = True [LOG 02:33:38.830] [WeldingTool] | Module ready to add = True [LOG 02:33:38.830] [WeldingTool] | Module ready to add = True [LOG 02:33:38.830] [WeldingTool] | Module ready to add = True [LOG 02:33:38.830] [WeldingTool] | Module ready to add = True [LOG 02:33:38.830] [WeldingTool] | Module ready to add = True [LOG 02:33:38.830] [WeldingTool] | Module ready to add = True [LOG 02:33:38.830] [WeldingTool] | Module ready to add = True [LOG 02:33:38.830] [WeldingTool] | ModuleResourceActions2 Module already exists!!! [LOG 02:33:38.830] [WeldingTool] | Module ready to add = True [LOG 02:33:38.830] [WeldingTool] | Module ready to add = True [LOG 02:33:38.830] [WeldingTool] | Module ready to add = True [LOG 02:33:38.830] [WeldingTool] | Module ready to add = True [LOG 02:33:38.830] [WeldingTool] | Module ready to add = True [LOG 02:33:38.830] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.830] [WeldingTool] ..Config battery-125 has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.830] [WeldingTool] ..Config battery-125 has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.830] [WeldingTool] ..Config battery-125 has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.830] [WeldingTool] ..Config battery-125 has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.830] [WeldingTool] .Part battery-125 has 2 Stack attach node(s) [LOG 02:33:38.831] [WeldingTool] ..set relative position =(-1.800, 16.925, -1.000) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.831] [WeldingTool] .Stack Node Add: topbattery-12513 [LOG 02:33:38.831] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.831] [WeldingTool] New Center of Mass: (0.0, 16.1, 0.1) [LOG 02:33:38.831] [WeldingTool] Part crashTolerance: 8 - Global crashTolerance: 25.5512 - method: WeightedAverage [LOG 02:33:38.831] [WeldingTool] Part crashTolerance: 22 - Global crashTolerance: 645.853 - method: WeightedAverage [LOG 02:33:38.831] [WeldingTool] Part breakingTorque: 22 - Global breakingTorque: 645.853 - method: WeightedAverage [LOG 02:33:38.831] [WeldingTool] Part maxTemp: 2000 - Global maxTemp: 1962.053 - method: WeightedAverage [LOG 02:33:38.831] [WeldingTool] Welding this part: battery-125 [LOG 02:33:38.831] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.831] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.831] [WeldingTool] battery-125 Attache mode STACK Attach method FIXED_JOINT [LOG 02:33:38.833] [WeldingTool] .Found 1 config files [LOG 02:33:38.833] [WeldingTool] ..Config battery-125 has no MODEL node [LOG 02:33:38.833] [WeldingTool] ..MODEL url: NearFutureElectrical/Parts/Batteries/battery-125/battery-125 [LOG 02:33:38.833] [WeldingTool] scaling info: rescaleFactor=1| vector=(1.000, 1.000, 1.000) [LOG 02:33:38.833] [WeldingTool] ..newpart position (-1.800, 17.945, -1.000) [LOG 02:33:38.833] [WeldingTool] ..newpart rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.833] [WeldingTool] ..newpart rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.833] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 180.000, 180.000) [LOG 02:33:38.833] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.833] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.833] [WeldingTool] ..position (-1.800, 17.945, -1.000) [LOG 02:33:38.833] [WeldingTool] ..rotation (0.000, 0.000, 0.000) [LOG 02:33:38.833] [WeldingTool] ..scale (1.000, 1.000, 1.000) [LOG 02:33:38.833] [WeldingTool] ..Part Part has 1 RESOURCE node [LOG 02:33:38.833] [WeldingTool] ..RESOURCE add: ElectricCharge 6400/6400 [LOG 02:33:38.833] [WeldingTool] ..Config battery-125 has 6 MODULE node [LOG 02:33:38.833] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.833] [WeldingTool] | Module ready to add = True [LOG 02:33:38.833] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.833] [WeldingTool] | Module ready to add = True [LOG 02:33:38.833] [WeldingTool] | Module ready to add = True [LOG 02:33:38.833] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.833] [WeldingTool] | Module ready to add = True [LOG 02:33:38.833] [WeldingTool] | Module ready to add = True [LOG 02:33:38.833] [WeldingTool] | Module ready to add = True [LOG 02:33:38.833] [WeldingTool] | Module ready to add = True [LOG 02:33:38.833] [WeldingTool] | Module ready to add = True [LOG 02:33:38.833] [WeldingTool] | Module ready to add = True [LOG 02:33:38.833] [WeldingTool] | Module ready to add = True [LOG 02:33:38.833] [WeldingTool] | Module ready to add = True [LOG 02:33:38.833] [WeldingTool] | Module ready to add = True [LOG 02:33:38.833] [WeldingTool] | Module ready to add = True [LOG 02:33:38.833] [WeldingTool] | Module ready to add = True [LOG 02:33:38.833] [WeldingTool] | Module ready to add = True [LOG 02:33:38.833] [WeldingTool] | Module ready to add = True [LOG 02:33:38.833] [WeldingTool] | Module ready to add = True [LOG 02:33:38.833] [WeldingTool] | Module ready to add = True [LOG 02:33:38.833] [WeldingTool] | Module ready to add = True [LOG 02:33:38.833] [WeldingTool] | Module ready to add = True [LOG 02:33:38.833] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.833] [WeldingTool] | Module ready to add = True [LOG 02:33:38.833] [WeldingTool] | Module ready to add = True [LOG 02:33:38.833] [WeldingTool] | Module ready to add = True [LOG 02:33:38.833] [WeldingTool] | Module ready to add = True [LOG 02:33:38.833] [WeldingTool] | Module ready to add = True [LOG 02:33:38.833] [WeldingTool] | Module ready to add = True [LOG 02:33:38.833] [WeldingTool] | Module ready to add = True [LOG 02:33:38.833] [WeldingTool] | Module ready to add = True [LOG 02:33:38.833] [WeldingTool] | ModuleResourceActions2 Module already exists!!! [LOG 02:33:38.833] [WeldingTool] | Module ready to add = True [LOG 02:33:38.833] [WeldingTool] | Module ready to add = True [LOG 02:33:38.833] [WeldingTool] | Module ready to add = True [LOG 02:33:38.833] [WeldingTool] | Module ready to add = True [LOG 02:33:38.833] [WeldingTool] | Module ready to add = True [LOG 02:33:38.833] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.834] [WeldingTool] ..Config battery-125 has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.834] [WeldingTool] ..Config battery-125 has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.834] [WeldingTool] ..Config battery-125 has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.834] [WeldingTool] ..Config battery-125 has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.834] [WeldingTool] .Part battery-125 has 2 Stack attach node(s) [LOG 02:33:38.834] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.834] [WeldingTool] New Center of Mass: (0.0, 16.1, 0.1) [LOG 02:33:38.834] [WeldingTool] Part crashTolerance: 8 - Global crashTolerance: 24.86952 - method: WeightedAverage [LOG 02:33:38.834] [WeldingTool] Part crashTolerance: 22 - Global crashTolerance: 621.6227 - method: WeightedAverage [LOG 02:33:38.834] [WeldingTool] Part breakingTorque: 22 - Global breakingTorque: 621.6227 - method: WeightedAverage [LOG 02:33:38.834] [WeldingTool] Part maxTemp: 2000 - Global maxTemp: 1963.527 - method: WeightedAverage [LOG 02:33:38.834] [WeldingTool] Welding this part: battery-125 [LOG 02:33:38.834] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.834] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.834] [WeldingTool] battery-125 Attache mode STACK Attach method FIXED_JOINT [LOG 02:33:38.836] [WeldingTool] .Found 1 config files [LOG 02:33:38.836] [WeldingTool] ..Config battery-125 has no MODEL node [LOG 02:33:38.836] [WeldingTool] ..MODEL url: NearFutureElectrical/Parts/Batteries/battery-125/battery-125 [LOG 02:33:38.836] [WeldingTool] scaling info: rescaleFactor=1| vector=(1.000, 1.000, 1.000) [LOG 02:33:38.836] [WeldingTool] ..newpart position (-1.800, 18.965, -1.000) [LOG 02:33:38.836] [WeldingTool] ..newpart rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.836] [WeldingTool] ..newpart rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.836] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.836] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.836] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.836] [WeldingTool] ..position (-1.800, 18.965, -1.000) [LOG 02:33:38.836] [WeldingTool] ..rotation (0.000, 0.000, 0.000) [LOG 02:33:38.836] [WeldingTool] ..scale (1.000, 1.000, 1.000) [LOG 02:33:38.836] [WeldingTool] ..Part Part has 1 RESOURCE node [LOG 02:33:38.836] [WeldingTool] ..RESOURCE add: ElectricCharge 6400/6400 [LOG 02:33:38.836] [WeldingTool] ..Config battery-125 has 6 MODULE node [LOG 02:33:38.836] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.836] [WeldingTool] | Module ready to add = True [LOG 02:33:38.836] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.836] [WeldingTool] | Module ready to add = True [LOG 02:33:38.836] [WeldingTool] | Module ready to add = True [LOG 02:33:38.836] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.836] [WeldingTool] | Module ready to add = True [LOG 02:33:38.836] [WeldingTool] | Module ready to add = True [LOG 02:33:38.836] [WeldingTool] | Module ready to add = True [LOG 02:33:38.836] [WeldingTool] | Module ready to add = True [LOG 02:33:38.836] [WeldingTool] | Module ready to add = True [LOG 02:33:38.836] [WeldingTool] | Module ready to add = True [LOG 02:33:38.836] [WeldingTool] | Module ready to add = True [LOG 02:33:38.836] [WeldingTool] | Module ready to add = True [LOG 02:33:38.836] [WeldingTool] | Module ready to add = True [LOG 02:33:38.836] [WeldingTool] | Module ready to add = True [LOG 02:33:38.836] [WeldingTool] | Module ready to add = True [LOG 02:33:38.836] [WeldingTool] | Module ready to add = True [LOG 02:33:38.836] [WeldingTool] | Module ready to add = True [LOG 02:33:38.836] [WeldingTool] | Module ready to add = True [LOG 02:33:38.836] [WeldingTool] | Module ready to add = True [LOG 02:33:38.836] [WeldingTool] | Module ready to add = True [LOG 02:33:38.836] [WeldingTool] | Module ready to add = True [LOG 02:33:38.837] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.837] [WeldingTool] | Module ready to add = True [LOG 02:33:38.837] [WeldingTool] | Module ready to add = True [LOG 02:33:38.837] [WeldingTool] | Module ready to add = True [LOG 02:33:38.837] [WeldingTool] | Module ready to add = True [LOG 02:33:38.837] [WeldingTool] | Module ready to add = True [LOG 02:33:38.837] [WeldingTool] | Module ready to add = True [LOG 02:33:38.837] [WeldingTool] | Module ready to add = True [LOG 02:33:38.837] [WeldingTool] | Module ready to add = True [LOG 02:33:38.837] [WeldingTool] | ModuleResourceActions2 Module already exists!!! [LOG 02:33:38.837] [WeldingTool] | Module ready to add = True [LOG 02:33:38.837] [WeldingTool] | Module ready to add = True [LOG 02:33:38.837] [WeldingTool] | Module ready to add = True [LOG 02:33:38.837] [WeldingTool] | Module ready to add = True [LOG 02:33:38.837] [WeldingTool] | Module ready to add = True [LOG 02:33:38.837] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.837] [WeldingTool] ..Config battery-125 has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.837] [WeldingTool] ..Config battery-125 has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.837] [WeldingTool] ..Config battery-125 has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.837] [WeldingTool] ..Config battery-125 has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.837] [WeldingTool] .Part battery-125 has 2 Stack attach node(s) [LOG 02:33:38.837] [WeldingTool] ..set relative position =(-1.800, 18.965, -1.000) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.837] [WeldingTool] .Stack Node Add: topbattery-12515 [LOG 02:33:38.837] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.837] [WeldingTool] New Center of Mass: (0.0, 16.2, 0.1) [LOG 02:33:38.837] [WeldingTool] Part crashTolerance: 8 - Global crashTolerance: 24.23881 - method: WeightedAverage [LOG 02:33:38.837] [WeldingTool] Part crashTolerance: 22 - Global crashTolerance: 599.2043 - method: WeightedAverage [LOG 02:33:38.837] [WeldingTool] Part breakingTorque: 22 - Global breakingTorque: 599.2043 - method: WeightedAverage [LOG 02:33:38.837] [WeldingTool] Part maxTemp: 2000 - Global maxTemp: 1964.891 - method: WeightedAverage [LOG 02:33:38.837] [WeldingTool] Welding this part: mk4cargo-1 [LOG 02:33:38.837] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.837] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.837] [WeldingTool] mk4cargo-1 Attache mode STACK Attach method FIXED_JOINT [LOG 02:33:38.839] [WeldingTool] .Found 1 config files [LOG 02:33:38.839] [WeldingTool] ..Config mk4cargo-1 has 1 MODEL node [LOG 02:33:38.839] [WeldingTool] ..MODEL url: MarkIVSystem/Parts/Fuselage/mk4cargo-1 [LOG 02:33:38.839] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.839] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.839] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.839] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.840] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.840] [WeldingTool] ..Childs count 5 [LOG 02:33:38.840] [WeldingTool] scaling info: rescaleFactor=1| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.840] [WeldingTool] ..newpart position (0.000, 8.875, 0.000) [LOG 02:33:38.840] [WeldingTool] ..newpart rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.840] [WeldingTool] ..newpart rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.840] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.840] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.840] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.840] [WeldingTool] ..position (0.000, 8.875, 0.000) [LOG 02:33:38.840] [WeldingTool] ..rotation (0.000, 0.000, 0.000) [LOG 02:33:38.840] [WeldingTool] ..scale (1.000, 1.000, 1.000) [LOG 02:33:38.840] [WeldingTool] ..Part Part has 2 RESOURCE node [LOG 02:33:38.840] [WeldingTool] ..RESOURCE add: LiquidFuel 1440/1440 [LOG 02:33:38.840] [WeldingTool] ..RESOURCE add: Oxidizer 1760/1760 [LOG 02:33:38.840] [WeldingTool] ..Config mk4cargo-1 has 11 MODULE node [LOG 02:33:38.840] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] [WeldingTool] ..MODULE add: ModuleAnimateGeneric [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] | Module ready to add = True [LOG 02:33:38.840] [WeldingTool] [WeldingTool] ..MODULE add: ModuleCargoBay [LOG 02:33:38.840] [WeldingTool] | ModuleLiftingSurface Module already exists!!! [LOG 02:33:38.840] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.840] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.840] [WeldingTool] | ModuleLiftingSurface - name is string [LOG 02:33:38.840] [WeldingTool] | ModuleLiftingSurface - name is merged with value ModuleLiftingSurface [LOG 02:33:38.840] [WeldingTool] | ModuleLiftingSurface - useInternalDragModel is bool [LOG 02:33:38.840] [WeldingTool] | ModuleLiftingSurface - useInternalDragModel is merged with value False [LOG 02:33:38.840] [WeldingTool] | ModuleLiftingSurface - deflectionLiftCoeff is float [LOG 02:33:38.840] [WeldingTool] | ModuleLiftingSurface - newValue - deflectionLiftCoeff = 6 [LOG 02:33:38.840] [WeldingTool] | ModuleLiftingSurface - existingValue - deflectionLiftCoeff = 1.5 [LOG 02:33:38.840] [WeldingTool] | ModuleLiftingSurface - deflectionLiftCoeff - added [LOG 02:33:38.840] [WeldingTool] | ModuleLiftingSurface - deflectionLiftCoeff is merged with value 7.5 [LOG 02:33:38.840] [WeldingTool] | ModuleLiftingSurface - dragAtMaxAoA is float [LOG 02:33:38.840] [WeldingTool] | ModuleLiftingSurface - newValue - dragAtMaxAoA = 0.3 [LOG 02:33:38.840] [WeldingTool] | ModuleLiftingSurface - existingValue - dragAtMaxAoA = 0.3 [LOG 02:33:38.840] [WeldingTool] | ModuleLiftingSurface - dragAtMaxAoA - added [LOG 02:33:38.840] [WeldingTool] | ModuleLiftingSurface - dragAtMaxAoA is merged with value 0.6 [LOG 02:33:38.840] [WeldingTool] | ModuleLiftingSurface - dragAtMinAoA is float [LOG 02:33:38.840] [WeldingTool] | ModuleLiftingSurface - newValue - dragAtMinAoA = 0.1 [LOG 02:33:38.840] [WeldingTool] | ModuleLiftingSurface - existingValue - dragAtMinAoA = 0.1 [LOG 02:33:38.840] [WeldingTool] | ModuleLiftingSurface - dragAtMinAoA - added [LOG 02:33:38.840] [WeldingTool] | ModuleLiftingSurface - dragAtMinAoA is merged with value 0.2 [LOG 02:33:38.841] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.841] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.841] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.841] [WeldingTool] Values done [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] [WeldingTool] ..MODULE add: AYA_CargoBay [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | Module ready to add = True [LOG 02:33:38.841] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.841] [WeldingTool] ..Config mk4cargo-1 has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.841] [WeldingTool] ..Config mk4cargo-1 has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.841] [WeldingTool] ..Config mk4cargo-1 has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.841] [WeldingTool] ..Config mk4cargo-1 has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.841] [WeldingTool] .Part mk4cargo-1 has 4 Stack attach node(s) [LOG 02:33:38.841] [WeldingTool] ..set relative position =(0.000, 8.875, 0.000) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.841] [WeldingTool] .Stack Node Add: top2mk4cargo-116 [LOG 02:33:38.841] [WeldingTool] ..set relative position =(0.000, 8.875, 0.000) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.841] [WeldingTool] .Stack Node Add: bottom2mk4cargo-116 [LOG 02:33:38.841] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.841] [WeldingTool] New Center of Mass: (0.0, 12.9, 0.1) [LOG 02:33:38.841] [WeldingTool] Part crashTolerance: 50 - Global crashTolerance: 38.88872 - method: WeightedAverage [LOG 02:33:38.841] [WeldingTool] Part crashTolerance: 300 - Global crashTolerance: 429.0524 - method: WeightedAverage [LOG 02:33:38.841] [WeldingTool] Part breakingTorque: 300 - Global breakingTorque: 429.0524 - method: WeightedAverage [LOG 02:33:38.841] [WeldingTool] Part maxTemp: 2700 - Global maxTemp: 2382.934 - method: WeightedAverage [LOG 02:33:38.841] [WeldingTool] Welding this part: mk3FuselageLFO.100 [LOG 02:33:38.841] [WeldingTool] ..part rescaleFactor 0.67 [LOG 02:33:38.841] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.841] [WeldingTool] mk3FuselageLFO.100 Attache mode SRF_ATTACH Attach method FIXED_JOINT [LOG 02:33:38.844] [WeldingTool] .Found 1 config files [LOG 02:33:38.844] [WeldingTool] ..Config mk3FuselageLFO_100 has 1 MODEL node [LOG 02:33:38.844] [WeldingTool] ..MODEL url: Squad/Parts/FuelTank/mk3Fuselage/LFO_100 [LOG 02:33:38.844] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.844] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.844] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.844] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.844] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.844] [WeldingTool] ..Childs count 5 [LOG 02:33:38.844] [WeldingTool] scaling info: rescaleFactor=0.6666667| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.844] [WeldingTool] ..newpart position (3.900, 7.670, 0.466) [LOG 02:33:38.844] [WeldingTool] ..newpart rotation (0.000, 0.707, 0.000, -0.707) [LOG 02:33:38.844] [WeldingTool] ..newpart rotation.eulerAngles (0.000, 270.000, 0.000) [LOG 02:33:38.844] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 270.000, 0.000) [LOG 02:33:38.844] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.844] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.844] [WeldingTool] ..position (3.900, 7.670, 0.466) [LOG 02:33:38.844] [WeldingTool] ..rotation (0.000, 270.000, 0.000) [LOG 02:33:38.844] [WeldingTool] ..scale (0.667, 0.667, 0.667) [LOG 02:33:38.845] [WeldingTool] ..Part Part has 2 RESOURCE node [LOG 02:33:38.845] [WeldingTool] ..RESOURCE add: LiquidFuel 1706.667/1706.667 [LOG 02:33:38.845] [WeldingTool] ..RESOURCE add: Oxidizer 2085.926/2085.926 [LOG 02:33:38.845] [WeldingTool] ..Config mk3FuselageLFO_100 has 8 MODULE node [LOG 02:33:38.845] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | ModuleCryoTank Module already exists!!! [LOG 02:33:38.845] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.845] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.845] [WeldingTool] | ModuleCryoTank - name is string [LOG 02:33:38.845] [WeldingTool] | ModuleCryoTank - name is merged with value ModuleCryoTank [LOG 02:33:38.845] [WeldingTool] | ModuleCryoTank - FuelName is string [LOG 02:33:38.845] [WeldingTool] | ModuleCryoTank - FuelName is merged with value LqdHydrogen [LOG 02:33:38.845] [WeldingTool] | ModuleCryoTank - BoiloffRate is float [LOG 02:33:38.845] [WeldingTool] | ModuleCryoTank - newValue - BoiloffRate = 0.05 [LOG 02:33:38.845] [WeldingTool] | ModuleCryoTank - existingValue - BoiloffRate = 0.05 [LOG 02:33:38.845] [WeldingTool] | ModuleCryoTank - BoiloffRate - added [LOG 02:33:38.845] [WeldingTool] | ModuleCryoTank - BoiloffRate is merged with value 0.1 [LOG 02:33:38.845] [WeldingTool] | ModuleCryoTank - CoolingCost is float [LOG 02:33:38.845] [WeldingTool] | ModuleCryoTank - newValue - CoolingCost = 0.08 [LOG 02:33:38.845] [WeldingTool] | ModuleCryoTank - CoolingCost is merged with value 0.08 [LOG 02:33:38.845] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.845] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.845] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.845] [WeldingTool] Values done [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.845] [WeldingTool] | Module ready to add = True [LOG 02:33:38.846] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.846] [WeldingTool] ..Config mk3FuselageLFO_100 has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.846] [WeldingTool] ..Config mk3FuselageLFO_100 has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.846] [WeldingTool] ..Config mk3FuselageLFO_100 has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.846] [WeldingTool] ..Config mk3FuselageLFO_100 has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.846] [WeldingTool] .Part mk3FuselageLFO.100 has 2 Stack attach node(s) [LOG 02:33:38.846] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.846] [WeldingTool] New Center of Mass: (1.0, 11.5, 0.2) [LOG 02:33:38.846] [WeldingTool] Part crashTolerance: 50 - Global crashTolerance: 40.07436 - method: WeightedAverage [LOG 02:33:38.846] [WeldingTool] Part crashTolerance: 133.3333 - Global crashTolerance: 397.4976 - method: WeightedAverage [LOG 02:33:38.846] [WeldingTool] Part breakingTorque: 133.3333 - Global breakingTorque: 397.4976 - method: WeightedAverage [LOG 02:33:38.846] [WeldingTool] Part maxTemp: 2700 - Global maxTemp: 2416.767 - method: WeightedAverage [LOG 02:33:38.846] [WeldingTool] Welding this part: j.5m.nose [LOG 02:33:38.846] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.846] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.846] [WeldingTool] j.5m.nose Attache mode SRF_ATTACH Attach method FIXED_JOINT [LOG 02:33:38.848] [WeldingTool] .Found 1 config files [LOG 02:33:38.848] [WeldingTool] ..Config j_5m_nose has 1 MODEL node [LOG 02:33:38.848] [WeldingTool] ..MODEL url: OPT/Parts/main/j_5m_nose [LOG 02:33:38.848] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.848] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.848] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.848] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.848] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.848] [WeldingTool] ..Childs count 1 [LOG 02:33:38.848] [WeldingTool] scaling info: rescaleFactor=1| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.848] [WeldingTool] ..newpart position (6.987, 7.973, 0.153) [LOG 02:33:38.848] [WeldingTool] ..newpart rotation (0.000, 0.259, 0.000, 0.966) [LOG 02:33:38.848] [WeldingTool] ..newpart rotation.eulerAngles (0.000, 30.000, 0.000) [LOG 02:33:38.848] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 120.000, 0.000) [LOG 02:33:38.848] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.848] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.848] [WeldingTool] ..position (6.987, 7.973, 0.153) [LOG 02:33:38.849] [WeldingTool] ..rotation (0.000, 30.000, 0.000) [LOG 02:33:38.849] [WeldingTool] ..scale (1.000, 1.000, 1.000) [LOG 02:33:38.849] [WeldingTool] ..Part Part has 3 RESOURCE node [LOG 02:33:38.849] [WeldingTool] ..RESOURCE add: ElectricCharge 800/800 [LOG 02:33:38.849] [WeldingTool] ..RESOURCE add: LiquidFuel 360/360 [LOG 02:33:38.849] [WeldingTool] ..RESOURCE add: Oxidizer 440/440 [LOG 02:33:38.849] [WeldingTool] ..Config j_5m_nose has 11 MODULE node [LOG 02:33:38.849] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.849] [WeldingTool] | ModuleLiftingSurface Module already exists!!! [LOG 02:33:38.849] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.849] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.849] [WeldingTool] | ModuleLiftingSurface - name is string [LOG 02:33:38.849] [WeldingTool] | ModuleLiftingSurface - name is merged with value ModuleLiftingSurface [LOG 02:33:38.849] [WeldingTool] | ModuleLiftingSurface - deflectionLiftCoeff is float [LOG 02:33:38.849] [WeldingTool] | ModuleLiftingSurface - newValue - deflectionLiftCoeff = 1.929 [LOG 02:33:38.849] [WeldingTool] | ModuleLiftingSurface - existingValue - deflectionLiftCoeff = 7.5 [LOG 02:33:38.849] [WeldingTool] | ModuleLiftingSurface - deflectionLiftCoeff - added [LOG 02:33:38.849] [WeldingTool] | ModuleLiftingSurface - deflectionLiftCoeff is merged with value 9.429 [LOG 02:33:38.849] [WeldingTool] | ModuleLiftingSurface - dragAtMaxAoA is float [LOG 02:33:38.849] [WeldingTool] | ModuleLiftingSurface - newValue - dragAtMaxAoA = 0.847 [LOG 02:33:38.849] [WeldingTool] | ModuleLiftingSurface - existingValue - dragAtMaxAoA = 0.6 [LOG 02:33:38.849] [WeldingTool] | ModuleLiftingSurface - dragAtMaxAoA - added [LOG 02:33:38.849] [WeldingTool] | ModuleLiftingSurface - dragAtMaxAoA is merged with value 1.447 [LOG 02:33:38.849] [WeldingTool] | ModuleLiftingSurface - dragAtMinAoA is float [LOG 02:33:38.849] [WeldingTool] | ModuleLiftingSurface - newValue - dragAtMinAoA = 0.033 [LOG 02:33:38.849] [WeldingTool] | ModuleLiftingSurface - existingValue - dragAtMinAoA = 0.2 [LOG 02:33:38.849] [WeldingTool] | ModuleLiftingSurface - dragAtMinAoA - added [LOG 02:33:38.849] [WeldingTool] | ModuleLiftingSurface - dragAtMinAoA is merged with value 0.233 [LOG 02:33:38.849] [WeldingTool] | ModuleLiftingSurface - useInternalDragModel is bool [LOG 02:33:38.849] [WeldingTool] | ModuleLiftingSurface - useInternalDragModel is merged with value False [LOG 02:33:38.849] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.849] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.849] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.849] [WeldingTool] Values done [LOG 02:33:38.849] [WeldingTool] | Module ready to add = True [LOG 02:33:38.849] [WeldingTool] | Module ready to add = True [LOG 02:33:38.849] [WeldingTool] | Module ready to add = True [LOG 02:33:38.849] [WeldingTool] | Module ready to add = True [LOG 02:33:38.849] [WeldingTool] | Module ready to add = True [LOG 02:33:38.849] [WeldingTool] | Module ready to add = True [LOG 02:33:38.849] [WeldingTool] | Module ready to add = True [LOG 02:33:38.849] [WeldingTool] | Module ready to add = True [LOG 02:33:38.849] [WeldingTool] | Module ready to add = True [LOG 02:33:38.849] [WeldingTool] | Module ready to add = True [LOG 02:33:38.849] [WeldingTool] | Module ready to add = True [LOG 02:33:38.849] [WeldingTool] | Module ready to add = True [LOG 02:33:38.849] [WeldingTool] | ModuleReactionWheel Module already exists!!! [LOG 02:33:38.849] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.849] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.849] [WeldingTool] | ModuleReactionWheel - name is string [LOG 02:33:38.849] [WeldingTool] | ModuleReactionWheel - name is merged with value ModuleReactionWheel [LOG 02:33:38.849] [WeldingTool] | ModuleReactionWheel - actionGUIName is string [LOG 02:33:38.849] [WeldingTool] | ModuleReactionWheel - actionGUIName is merged with value Toggle RW [LOG 02:33:38.849] [WeldingTool] | ModuleReactionWheel - PitchTorque is float [LOG 02:33:38.849] [WeldingTool] | ModuleReactionWheel - newValue - PitchTorque = 40 [LOG 02:33:38.849] [WeldingTool] | ModuleReactionWheel - existingValue - PitchTorque = 45 [LOG 02:33:38.849] [WeldingTool] | ModuleReactionWheel - PitchTorque - added [LOG 02:33:38.849] [WeldingTool] | ModuleReactionWheel - PitchTorque is merged with value 85 [LOG 02:33:38.849] [WeldingTool] | ModuleReactionWheel - YawTorque is float [LOG 02:33:38.849] [WeldingTool] | ModuleReactionWheel - newValue - YawTorque = 20 [LOG 02:33:38.849] [WeldingTool] | ModuleReactionWheel - existingValue - YawTorque = 45 [LOG 02:33:38.849] [WeldingTool] | ModuleReactionWheel - YawTorque - added [LOG 02:33:38.849] [WeldingTool] | ModuleReactionWheel - YawTorque is merged with value 65 [LOG 02:33:38.849] [WeldingTool] | ModuleReactionWheel - RollTorque is float [LOG 02:33:38.849] [WeldingTool] | ModuleReactionWheel - newValue - RollTorque = 20 [LOG 02:33:38.849] [WeldingTool] | ModuleReactionWheel - existingValue - RollTorque = 45 [LOG 02:33:38.849] [WeldingTool] | ModuleReactionWheel - RollTorque - added [LOG 02:33:38.849] [WeldingTool] | ModuleReactionWheel - RollTorque is merged with value 65 [LOG 02:33:38.849] [WeldingTool] | ModuleReactionWheel - torqueResponseSpeed is float [LOG 02:33:38.849] [WeldingTool] | ModuleReactionWheel - newValue - torqueResponseSpeed = 15 [LOG 02:33:38.849] [WeldingTool] | ModuleReactionWheel - torqueResponseSpeed is merged with value 15 [LOG 02:33:38.849] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.849] [WeldingTool] | SubModule BreakingAttributes found = 0 [LOG 02:33:38.849] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.849] [WeldingTool] | ElectricCharge - name is string [LOG 02:33:38.849] [WeldingTool] | ElectricCharge - name is merged with value ElectricCharge [LOG 02:33:38.849] [WeldingTool] | ElectricCharge - rate is float [LOG 02:33:38.849] [WeldingTool] | ElectricCharge - newValue - rate = 0.5 [LOG 02:33:38.849] [WeldingTool] | ElectricCharge - existingValue - rate = 1.35 [LOG 02:33:38.849] [WeldingTool] | ElectricCharge - rate - added [LOG 02:33:38.849] [WeldingTool] | ElectricCharge - rate is merged with value 1.85 [LOG 02:33:38.849] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.849] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.849] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.849] [WeldingTool] Values done [LOG 02:33:38.849] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.849] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.849] [WeldingTool] Values done [LOG 02:33:38.849] [WeldingTool] | Module ready to add = True [LOG 02:33:38.849] [WeldingTool] | Module ready to add = True [LOG 02:33:38.849] [WeldingTool] | Module ready to add = True [LOG 02:33:38.849] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] [WeldingTool] ..MODULE add: ModuleSAS [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] [WeldingTool] ..MODULE add: ModuleKerbNetAccess [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | AYA_SAS Module already exists!!! [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | ModuleResourceActions2 Module already exists!!! [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | Module ready to add = True [LOG 02:33:38.850] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.850] [WeldingTool] ..Config j_5m_nose has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.850] [WeldingTool] ..Config j_5m_nose has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.850] [WeldingTool] ..Config j_5m_nose has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.850] [WeldingTool] ..Config j_5m_nose has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.850] [WeldingTool] .Part j.5m.nose has 1 Stack attach node(s) [LOG 02:33:38.850] [WeldingTool] ..set relative position =(6.987, 7.973, 0.153) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.850] [WeldingTool] .Stack Node Add: bottomj.5m.nose18 [LOG 02:33:38.850] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.850] [WeldingTool] New Center of Mass: (1.4, 11.3, 0.2) [LOG 02:33:38.850] [WeldingTool] Part crashTolerance: 20 - Global crashTolerance: 38.21618 - method: WeightedAverage [LOG 02:33:38.850] [WeldingTool] Part crashTolerance: 600 - Global crashTolerance: 416.2422 - method: WeightedAverage [LOG 02:33:38.851] [WeldingTool] Part breakingTorque: 550 - Global breakingTorque: 411.6139 - method: WeightedAverage [LOG 02:33:38.851] [WeldingTool] Part maxTemp: 1650 - Global maxTemp: 2345.791 - method: WeightedAverage [LOG 02:33:38.851] [WeldingTool] Welding this part: B9.Aero.HL.Body.Tail.8m [LOG 02:33:38.851] [WeldingTool] ..part rescaleFactor 0.67 [LOG 02:33:38.851] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.851] [WeldingTool] B9.Aero.HL.Body.Tail.8m Attache mode STACK Attach method FIXED_JOINT [LOG 02:33:38.853] [WeldingTool] .Found 1 config files [LOG 02:33:38.853] [WeldingTool] ..Config B9_Aero_HL_Body_Tail_8m has 1 MODEL node [LOG 02:33:38.853] [WeldingTool] ..MODEL url: B9_Aerospace/Parts/Aero_HL_Body/8m-Universal-Tail [LOG 02:33:38.853] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.853] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.853] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.853] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.853] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.853] [WeldingTool] ..Childs count 1 [LOG 02:33:38.853] [WeldingTool] scaling info: rescaleFactor=0.6666667| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.853] [WeldingTool] ..newpart position (3.900, 13.003, 0.466) [LOG 02:33:38.853] [WeldingTool] ..newpart rotation (0.707, 0.000, -0.707, 0.000) [LOG 02:33:38.853] [WeldingTool] ..newpart rotation.eulerAngles (0.000, 270.000, 180.000) [LOG 02:33:38.853] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 0.000, 180.000) [LOG 02:33:38.853] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.853] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.853] [WeldingTool] ..position (3.900, 13.003, 0.466) [LOG 02:33:38.853] [WeldingTool] ..rotation (0.000, 270.000, 180.000) [LOG 02:33:38.853] [WeldingTool] ..scale (0.667, 0.667, 0.667) [LOG 02:33:38.853] [WeldingTool] ..Part Part has 2 RESOURCE node [LOG 02:33:38.853] [WeldingTool] ..RESOURCE add: LiquidFuel 949.3334/949.3334 [LOG 02:33:38.853] [WeldingTool] ..RESOURCE add: Oxidizer 1160.296/1160.296 [LOG 02:33:38.853] [WeldingTool] ..Config B9_Aero_HL_Body_Tail_8m has 9 MODULE node [LOG 02:33:38.853] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.853] [WeldingTool] | Module ready to add = True [LOG 02:33:38.853] [WeldingTool] | Module ready to add = True [LOG 02:33:38.853] [WeldingTool] | Module ready to add = True [LOG 02:33:38.853] [WeldingTool] | Module ready to add = True [LOG 02:33:38.853] [WeldingTool] | Module ready to add = True [LOG 02:33:38.853] [WeldingTool] | Module ready to add = True [LOG 02:33:38.853] [WeldingTool] | Module ready to add = True [LOG 02:33:38.853] [WeldingTool] | Module ready to add = True [LOG 02:33:38.853] [WeldingTool] | Module ready to add = True [LOG 02:33:38.853] [WeldingTool] | Module ready to add = True [LOG 02:33:38.853] [WeldingTool] | Module ready to add = True [LOG 02:33:38.853] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | ModuleCryoTank Module already exists!!! [LOG 02:33:38.854] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.854] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.854] [WeldingTool] | ModuleCryoTank - name is string [LOG 02:33:38.854] [WeldingTool] | ModuleCryoTank - name is merged with value ModuleCryoTank [LOG 02:33:38.854] [WeldingTool] | ModuleCryoTank - FuelName is string [LOG 02:33:38.854] [WeldingTool] | ModuleCryoTank - FuelName is merged with value LqdHydrogen [LOG 02:33:38.854] [WeldingTool] | ModuleCryoTank - BoiloffRate is float [LOG 02:33:38.854] [WeldingTool] | ModuleCryoTank - newValue - BoiloffRate = 0.05 [LOG 02:33:38.854] [WeldingTool] | ModuleCryoTank - existingValue - BoiloffRate = 0.1 [LOG 02:33:38.854] [WeldingTool] | ModuleCryoTank - BoiloffRate - added [LOG 02:33:38.854] [WeldingTool] | ModuleCryoTank - BoiloffRate is merged with value 0.15 [LOG 02:33:38.854] [WeldingTool] | ModuleCryoTank - CoolingCost is float [LOG 02:33:38.854] [WeldingTool] | ModuleCryoTank - newValue - CoolingCost = 0.08 [LOG 02:33:38.854] [WeldingTool] | ModuleCryoTank - CoolingCost is merged with value 0.08 [LOG 02:33:38.854] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.854] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.854] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.854] [WeldingTool] Values done [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.854] [WeldingTool] | Module ready to add = True [LOG 02:33:38.855] [WeldingTool] | Module ready to add = True [LOG 02:33:38.855] [WeldingTool] | Module ready to add = True [LOG 02:33:38.855] [WeldingTool] | Module ready to add = True [LOG 02:33:38.855] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.855] [WeldingTool] ..Config B9_Aero_HL_Body_Tail_8m has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.855] [WeldingTool] ..Config B9_Aero_HL_Body_Tail_8m has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.855] [WeldingTool] ..Config B9_Aero_HL_Body_Tail_8m has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.855] [WeldingTool] ..Config B9_Aero_HL_Body_Tail_8m has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.855] [WeldingTool] .Part B9.Aero.HL.Body.Tail.8m has 1 Stack attach node(s) [LOG 02:33:38.855] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.855] [WeldingTool] New Center of Mass: (1.7, 11.5, 0.2) [LOG 02:33:38.855] [WeldingTool] Part crashTolerance: 30 - Global crashTolerance: 37.60464 - method: WeightedAverage [LOG 02:33:38.855] [WeldingTool] Part crashTolerance: 1227.556 - Global crashTolerance: 476.6286 - method: WeightedAverage [LOG 02:33:38.855] [WeldingTool] Part breakingTorque: 1227.556 - Global breakingTorque: 472.3448 - method: WeightedAverage [LOG 02:33:38.855] [WeldingTool] Part maxTemp: 2500 - Global maxTemp: 2357.269 - method: WeightedAverage [LOG 02:33:38.855] [WeldingTool] Welding this part: mk2FuselageLongLFO [LOG 02:33:38.855] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.855] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.855] [WeldingTool] mk2FuselageLongLFO Attache mode SRF_ATTACH Attach method FIXED_JOINT [LOG 02:33:38.857] [WeldingTool] .Found 1 config files [LOG 02:33:38.857] [WeldingTool] ..Config mk2FuselageLongLFO has 1 MODEL node [LOG 02:33:38.857] [WeldingTool] ..MODEL url: Squad/Parts/FuelTank/mk2FuselageLong/FuselageLongLFO [LOG 02:33:38.857] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.857] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.858] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.858] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.858] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.858] [WeldingTool] ..Childs count 3 [LOG 02:33:38.858] [WeldingTool] scaling info: rescaleFactor=1| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.858] [WeldingTool] ..newpart position (5.300, 10.770, 0.566) [LOG 02:33:38.858] [WeldingTool] ..newpart rotation (0.865, 0.500, -0.011, -0.042) [LOG 02:33:38.858] [WeldingTool] ..newpart rotation.eulerAngles (356.467, 183.540, 119.891) [LOG 02:33:38.858] [WeldingTool] ..newpart rotation.localEulerAngles (356.467, 273.540, 119.891) [LOG 02:33:38.858] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.858] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.858] [WeldingTool] ..position (5.300, 10.770, 0.566) [LOG 02:33:38.858] [WeldingTool] ..rotation (356.467, 183.540, 119.891) [LOG 02:33:38.858] [WeldingTool] ..scale (1.000, 1.000, -1.000) [LOG 02:33:38.858] [WeldingTool] ..Part Part has 2 RESOURCE node [LOG 02:33:38.858] [WeldingTool] ..RESOURCE add: LiquidFuel 360/360 [LOG 02:33:38.858] [WeldingTool] ..RESOURCE add: Oxidizer 440/440 [LOG 02:33:38.858] [WeldingTool] ..Config mk2FuselageLongLFO has 9 MODULE node [LOG 02:33:38.858] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.858] [WeldingTool] | ModuleLiftingSurface Module already exists!!! [LOG 02:33:38.858] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.858] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.858] [WeldingTool] | ModuleLiftingSurface - name is string [LOG 02:33:38.858] [WeldingTool] | ModuleLiftingSurface - name is merged with value ModuleLiftingSurface [LOG 02:33:38.858] [WeldingTool] | ModuleLiftingSurface - useInternalDragModel is bool [LOG 02:33:38.858] [WeldingTool] | ModuleLiftingSurface - useInternalDragModel is merged with value False [LOG 02:33:38.858] [WeldingTool] | ModuleLiftingSurface - deflectionLiftCoeff is float [LOG 02:33:38.858] [WeldingTool] | ModuleLiftingSurface - newValue - deflectionLiftCoeff = 0.7 [LOG 02:33:38.858] [WeldingTool] | ModuleLiftingSurface - existingValue - deflectionLiftCoeff = 9.429 [LOG 02:33:38.858] [WeldingTool] | ModuleLiftingSurface - deflectionLiftCoeff - added [LOG 02:33:38.858] [WeldingTool] | ModuleLiftingSurface - deflectionLiftCoeff is merged with value 10.129 [LOG 02:33:38.858] [WeldingTool] | ModuleLiftingSurface - dragAtMaxAoA is float [LOG 02:33:38.858] [WeldingTool] | ModuleLiftingSurface - newValue - dragAtMaxAoA = 0.3 [LOG 02:33:38.858] [WeldingTool] | ModuleLiftingSurface - existingValue - dragAtMaxAoA = 1.447 [LOG 02:33:38.858] [WeldingTool] | ModuleLiftingSurface - dragAtMaxAoA - added [LOG 02:33:38.858] [WeldingTool] | ModuleLiftingSurface - dragAtMaxAoA is merged with value 1.747 [LOG 02:33:38.858] [WeldingTool] | ModuleLiftingSurface - dragAtMinAoA is float [LOG 02:33:38.858] [WeldingTool] | ModuleLiftingSurface - newValue - dragAtMinAoA = 0.1 [LOG 02:33:38.858] [WeldingTool] | ModuleLiftingSurface - existingValue - dragAtMinAoA = 0.233 [LOG 02:33:38.858] [WeldingTool] | ModuleLiftingSurface - dragAtMinAoA - added [LOG 02:33:38.858] [WeldingTool] | ModuleLiftingSurface - dragAtMinAoA is merged with value 0.333 [LOG 02:33:38.858] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.858] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.858] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.858] [WeldingTool] Values done [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.858] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | ModuleCryoTank Module already exists!!! [LOG 02:33:38.859] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.859] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.859] [WeldingTool] | ModuleCryoTank - name is string [LOG 02:33:38.859] [WeldingTool] | ModuleCryoTank - name is merged with value ModuleCryoTank [LOG 02:33:38.859] [WeldingTool] | ModuleCryoTank - FuelName is string [LOG 02:33:38.859] [WeldingTool] | ModuleCryoTank - FuelName is merged with value LqdHydrogen [LOG 02:33:38.859] [WeldingTool] | ModuleCryoTank - BoiloffRate is float [LOG 02:33:38.859] [WeldingTool] | ModuleCryoTank - newValue - BoiloffRate = 0.05 [LOG 02:33:38.859] [WeldingTool] | ModuleCryoTank - existingValue - BoiloffRate = 0.15 [LOG 02:33:38.859] [WeldingTool] | ModuleCryoTank - BoiloffRate - added [LOG 02:33:38.859] [WeldingTool] | ModuleCryoTank - BoiloffRate is merged with value 0.2 [LOG 02:33:38.859] [WeldingTool] | ModuleCryoTank - CoolingCost is float [LOG 02:33:38.859] [WeldingTool] | ModuleCryoTank - newValue - CoolingCost = 0.08 [LOG 02:33:38.859] [WeldingTool] | ModuleCryoTank - CoolingCost is merged with value 0.08 [LOG 02:33:38.859] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.859] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.859] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.859] [WeldingTool] Values done [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | Module ready to add = True [LOG 02:33:38.859] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.859] [WeldingTool] ..Config mk2FuselageLongLFO has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.859] [WeldingTool] ..Config mk2FuselageLongLFO has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.859] [WeldingTool] ..Config mk2FuselageLongLFO has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.859] [WeldingTool] ..Config mk2FuselageLongLFO has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.859] [WeldingTool] .Part mk2FuselageLongLFO has 2 Stack attach node(s) [LOG 02:33:38.859] [WeldingTool] ..set relative position =(5.300, 10.770, 0.566) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.859] [WeldingTool] .Stack Node Add: topmk2FuselageLongLFO20 [LOG 02:33:38.859] [WeldingTool] ..set relative position =(5.300, 10.770, 0.566) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.859] [WeldingTool] .Stack Node Add: bottommk2FuselageLongLFO20 [LOG 02:33:38.859] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.859] [WeldingTool] New Center of Mass: (1.9, 11.5, 0.2) [LOG 02:33:38.859] [WeldingTool] Part crashTolerance: 50 - Global crashTolerance: 37.83463 - method: WeightedAverage [LOG 02:33:38.859] [WeldingTool] Part crashTolerance: 50 - Global crashTolerance: 468.713 - method: WeightedAverage [LOG 02:33:38.859] [WeldingTool] Part breakingTorque: 50 - Global breakingTorque: 464.5088 - method: WeightedAverage [LOG 02:33:38.859] [WeldingTool] Part maxTemp: 2500 - Global maxTemp: 2359.917 - method: WeightedAverage [LOG 02:33:38.859] [WeldingTool] Welding this part: M3X.WingSegmentE [LOG 02:33:38.859] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.859] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.859] [WeldingTool] M3X.WingSegmentE Attache mode SRF_ATTACH Attach method FIXED_JOINT [LOG 02:33:38.862] [WeldingTool] .Found 1 config files [LOG 02:33:38.862] [WeldingTool] ..Config M3X_WingSegmentE has 1 MODEL node [LOG 02:33:38.862] [WeldingTool] ..MODEL url: Mk3Expansion/Parts/Aero/BigSWings/SegmentE [LOG 02:33:38.862] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.862] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.862] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.862] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.862] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.862] [WeldingTool] ..Childs count 1 [LOG 02:33:38.862] [WeldingTool] scaling info: rescaleFactor=1| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.862] [WeldingTool] ..newpart position (6.200, 10.270, 0.047) [LOG 02:33:38.862] [WeldingTool] ..newpart rotation (-0.020, -0.049, -0.501, -0.864) [LOG 02:33:38.862] [WeldingTool] ..newpart rotation.eulerAngles (359.197, 6.030, 60.169) [LOG 02:33:38.862] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 175.000, 180.000) [LOG 02:33:38.862] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.862] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.862] [WeldingTool] ..position (6.200, 10.270, 0.047) [LOG 02:33:38.862] [WeldingTool] ..rotation (359.197, 6.030, 60.169) [LOG 02:33:38.862] [WeldingTool] ..scale (1.000, 1.000, 1.000) [LOG 02:33:38.862] [WeldingTool] ..texture ShuttleWings, Squad/Parts/Aero/shuttleWings/ShuttleWings [LOG 02:33:38.862] [WeldingTool] ..Part Part has 1 RESOURCE node [LOG 02:33:38.862] [WeldingTool] ..RESOURCE add: LiquidFuel 0/150 [LOG 02:33:38.862] [WeldingTool] ..Config M3X_WingSegmentE has 7 MODULE node [LOG 02:33:38.862] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.862] [WeldingTool] | ModuleLiftingSurface Module already exists!!! [LOG 02:33:38.862] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.862] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.862] [WeldingTool] | ModuleLiftingSurface - name is string [LOG 02:33:38.862] [WeldingTool] | ModuleLiftingSurface - name is merged with value ModuleLiftingSurface [LOG 02:33:38.862] [WeldingTool] | ModuleLiftingSurface - useInternalDragModel is bool [LOG 02:33:38.862] [WeldingTool] | ModuleLiftingSurface - useInternalDragModel is merged with value True [LOG 02:33:38.862] [WeldingTool] | ModuleLiftingSurface - deflectionLiftCoeff is float [LOG 02:33:38.862] [WeldingTool] | ModuleLiftingSurface - newValue - deflectionLiftCoeff = 3.08 [LOG 02:33:38.862] [WeldingTool] | ModuleLiftingSurface - existingValue - deflectionLiftCoeff = 10.129 [LOG 02:33:38.862] [WeldingTool] | ModuleLiftingSurface - deflectionLiftCoeff - added [LOG 02:33:38.862] [WeldingTool] | ModuleLiftingSurface - deflectionLiftCoeff is merged with value 13.209 [LOG 02:33:38.862] [WeldingTool] | ModuleLiftingSurface - dragAtMaxAoA is float [LOG 02:33:38.862] [WeldingTool] | ModuleLiftingSurface - newValue - dragAtMaxAoA = 1 [LOG 02:33:38.862] [WeldingTool] | ModuleLiftingSurface - existingValue - dragAtMaxAoA = 1.747 [LOG 02:33:38.862] [WeldingTool] | ModuleLiftingSurface - dragAtMaxAoA - added [LOG 02:33:38.862] [WeldingTool] | ModuleLiftingSurface - dragAtMaxAoA is merged with value 2.747 [LOG 02:33:38.862] [WeldingTool] | ModuleLiftingSurface - dragAtMinAoA is float [LOG 02:33:38.862] [WeldingTool] | ModuleLiftingSurface - newValue - dragAtMinAoA = 0 [LOG 02:33:38.862] [WeldingTool] | ModuleLiftingSurface - existingValue - dragAtMinAoA = 0.333 [LOG 02:33:38.862] [WeldingTool] | ModuleLiftingSurface - dragAtMinAoA - added [LOG 02:33:38.863] [WeldingTool] | ModuleLiftingSurface - dragAtMinAoA is merged with value 0.333 [LOG 02:33:38.863] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.863] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.863] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.863] [WeldingTool] Values done [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | ModuleResourceActions2 Module already exists!!! [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | Module ready to add = True [LOG 02:33:38.863] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.863] [WeldingTool] ..Config M3X_WingSegmentE has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.863] [WeldingTool] ..Config M3X_WingSegmentE has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.863] [WeldingTool] ..Config M3X_WingSegmentE has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.863] [WeldingTool] ..Config M3X_WingSegmentE has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.863] [WeldingTool] .Part M3X.WingSegmentE has 0 Stack attach node(s) [LOG 02:33:38.863] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.863] [WeldingTool] New Center of Mass: (1.9, 11.5, 0.2) [LOG 02:33:38.863] [WeldingTool] Part crashTolerance: 15 - Global crashTolerance: 37.62474 - method: WeightedAverage [LOG 02:33:38.863] [WeldingTool] Part crashTolerance: 22 - Global crashTolerance: 464.607 - method: WeightedAverage [LOG 02:33:38.863] [WeldingTool] Part breakingTorque: 22 - Global breakingTorque: 460.4414 - method: WeightedAverage [LOG 02:33:38.863] [WeldingTool] Part maxTemp: 2400 - Global maxTemp: 2360.285 - method: WeightedAverage [LOG 02:33:38.863] [WeldingTool] Welding this part: sweptWing2 [LOG 02:33:38.863] [WeldingTool] ..part rescaleFactor 1.20 [LOG 02:33:38.863] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.863] [WeldingTool] sweptWing2 Attache mode SRF_ATTACH Attach method FIXED_JOINT [LOG 02:33:38.866] [WeldingTool] .Found 1 config files [LOG 02:33:38.866] [WeldingTool] ..Config sweptWing2 has 1 MODEL node [LOG 02:33:38.866] [WeldingTool] ..MODEL url: Squad/Parts/Aero/wings/swept2 [LOG 02:33:38.866] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.866] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.866] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.866] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.866] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.866] [WeldingTool] ..Childs count 1 [LOG 02:33:38.866] [WeldingTool] scaling info: rescaleFactor=1.2| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.866] [WeldingTool] ..newpart position (6.550, 10.130, 1.076) [LOG 02:33:38.866] [WeldingTool] ..newpart rotation (-0.029, -0.036, -0.525, -0.850) [LOG 02:33:38.866] [WeldingTool] ..newpart rotation.eulerAngles (0.642, 5.201, 63.503) [LOG 02:33:38.866] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 176.667, 183.333) [LOG 02:33:38.866] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.866] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.866] [WeldingTool] ..position (6.550, 10.130, 1.076) [LOG 02:33:38.866] [WeldingTool] ..rotation (0.642, 5.201, 63.503) [LOG 02:33:38.866] [WeldingTool] ..scale (1.200, 1.200, 1.200) [LOG 02:33:38.866] [WeldingTool] ..Part Part has 0 RESOURCE node [LOG 02:33:38.866] [WeldingTool] ..Config sweptWing2 has 6 MODULE node [LOG 02:33:38.866] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.866] [WeldingTool] | ModuleLiftingSurface Module already exists!!! [LOG 02:33:38.866] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.866] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.866] [WeldingTool] | ModuleLiftingSurface - name is string [LOG 02:33:38.866] [WeldingTool] | ModuleLiftingSurface - name is merged with value ModuleLiftingSurface [LOG 02:33:38.866] [WeldingTool] | ModuleLiftingSurface - useInternalDragModel is bool [LOG 02:33:38.866] [WeldingTool] | ModuleLiftingSurface - useInternalDragModel is merged with value True [LOG 02:33:38.866] [WeldingTool] | ModuleLiftingSurface - deflectionLiftCoeff is float [LOG 02:33:38.866] [WeldingTool] | ModuleLiftingSurface - newValue - deflectionLiftCoeff = 2.26 [LOG 02:33:38.866] [WeldingTool] | ModuleLiftingSurface - existingValue - deflectionLiftCoeff = 13.209 [LOG 02:33:38.866] [WeldingTool] | ModuleLiftingSurface - deflectionLiftCoeff - added [LOG 02:33:38.866] [WeldingTool] | ModuleLiftingSurface - deflectionLiftCoeff is merged with value 15.469 [LOG 02:33:38.867] [WeldingTool] | ModuleLiftingSurface - dragAtMaxAoA is float [LOG 02:33:38.867] [WeldingTool] | ModuleLiftingSurface - newValue - dragAtMaxAoA = 0.3 [LOG 02:33:38.867] [WeldingTool] | ModuleLiftingSurface - existingValue - dragAtMaxAoA = 2.747 [LOG 02:33:38.867] [WeldingTool] | ModuleLiftingSurface - dragAtMaxAoA - added [LOG 02:33:38.867] [WeldingTool] | ModuleLiftingSurface - dragAtMaxAoA is merged with value 3.047 [LOG 02:33:38.867] [WeldingTool] | ModuleLiftingSurface - dragAtMinAoA is float [LOG 02:33:38.867] [WeldingTool] | ModuleLiftingSurface - newValue - dragAtMinAoA = 0 [LOG 02:33:38.867] [WeldingTool] | ModuleLiftingSurface - existingValue - dragAtMinAoA = 0.333 [LOG 02:33:38.867] [WeldingTool] | ModuleLiftingSurface - dragAtMinAoA - added [LOG 02:33:38.867] [WeldingTool] | ModuleLiftingSurface - dragAtMinAoA is merged with value 0.333 [LOG 02:33:38.867] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.867] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.867] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.867] [WeldingTool] Values done [LOG 02:33:38.867] [WeldingTool] | Module ready to add = True [LOG 02:33:38.867] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.867] [WeldingTool] | Module ready to add = True [LOG 02:33:38.867] [WeldingTool] | Module ready to add = True [LOG 02:33:38.867] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.867] [WeldingTool] | Module ready to add = True [LOG 02:33:38.867] [WeldingTool] | Module ready to add = True [LOG 02:33:38.867] [WeldingTool] | Module ready to add = True [LOG 02:33:38.867] [WeldingTool] | Module ready to add = True [LOG 02:33:38.867] [WeldingTool] | Module ready to add = True [LOG 02:33:38.867] [WeldingTool] | Module ready to add = True [LOG 02:33:38.867] [WeldingTool] | Module ready to add = True [LOG 02:33:38.867] [WeldingTool] | Module ready to add = True [LOG 02:33:38.867] [WeldingTool] | Module ready to add = True [LOG 02:33:38.867] [WeldingTool] | Module ready to add = True [LOG 02:33:38.867] [WeldingTool] | Module ready to add = True [LOG 02:33:38.867] [WeldingTool] | Module ready to add = True [LOG 02:33:38.867] [WeldingTool] | Module ready to add = True [LOG 02:33:38.867] [WeldingTool] | Module ready to add = True [LOG 02:33:38.867] [WeldingTool] | Module ready to add = True [LOG 02:33:38.867] [WeldingTool] | Module ready to add = True [LOG 02:33:38.867] [WeldingTool] | Module ready to add = True [LOG 02:33:38.867] [WeldingTool] | Module ready to add = True [LOG 02:33:38.867] [WeldingTool] | Module ready to add = True [LOG 02:33:38.867] [WeldingTool] | Module ready to add = True [LOG 02:33:38.867] [WeldingTool] | Module ready to add = True [LOG 02:33:38.867] [WeldingTool] | Module ready to add = True [LOG 02:33:38.867] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.867] [WeldingTool] | Module ready to add = True [LOG 02:33:38.867] [WeldingTool] | Module ready to add = True [LOG 02:33:38.867] [WeldingTool] | Module ready to add = True [LOG 02:33:38.867] [WeldingTool] | Module ready to add = True [LOG 02:33:38.867] [WeldingTool] | Module ready to add = True [LOG 02:33:38.867] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.867] [WeldingTool] ..Config sweptWing2 has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.867] [WeldingTool] ..Config sweptWing2 has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.867] [WeldingTool] ..Config sweptWing2 has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.867] [WeldingTool] ..Config sweptWing2 has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.867] [WeldingTool] .Part sweptWing2 has 0 Stack attach node(s) [LOG 02:33:38.867] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.867] [WeldingTool] New Center of Mass: (1.9, 11.5, 0.2) [LOG 02:33:38.867] [WeldingTool] Part crashTolerance: 15 - Global crashTolerance: 37.35723 - method: WeightedAverage [LOG 02:33:38.867] [WeldingTool] Part crashTolerance: 31.68 - Global crashTolerance: 459.4882 - method: WeightedAverage [LOG 02:33:38.867] [WeldingTool] Part breakingTorque: 31.68 - Global breakingTorque: 455.3718 - method: WeightedAverage [LOG 02:33:38.867] [WeldingTool] Part maxTemp: 2400 - Global maxTemp: 2360.755 - method: WeightedAverage [LOG 02:33:38.867] [WeldingTool] Welding this part: adapterMk3-Size2Slant [LOG 02:33:38.867] [WeldingTool] ..part rescaleFactor 0.67 [LOG 02:33:38.867] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.867] [WeldingTool] adapterMk3-Size2Slant Attache mode STACK Attach method FIXED_JOINT [LOG 02:33:38.870] [WeldingTool] .Found 1 config files [LOG 02:33:38.870] [WeldingTool] ..Config adapterMk3-Size2Slant has 1 MODEL node [LOG 02:33:38.870] [WeldingTool] ..MODEL url: Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant [LOG 02:33:38.870] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.870] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.870] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.870] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.870] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.870] [WeldingTool] ..Childs count 2 [LOG 02:33:38.870] [WeldingTool] scaling info: rescaleFactor=0.6666667| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.870] [WeldingTool] ..newpart position (3.900, 3.086, 0.466) [LOG 02:33:38.870] [WeldingTool] ..newpart rotation (0.707, 0.000, 0.707, 0.000) [LOG 02:33:38.870] [WeldingTool] ..newpart rotation.eulerAngles (0.000, 90.000, 180.000) [LOG 02:33:38.870] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 180.000, 180.000) [LOG 02:33:38.870] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.870] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.870] [WeldingTool] ..position (3.900, 3.086, 0.466) [LOG 02:33:38.870] [WeldingTool] ..rotation (0.000, 90.000, 180.000) [LOG 02:33:38.870] [WeldingTool] ..scale (0.667, 0.667, 0.667) [LOG 02:33:38.870] [WeldingTool] ..Part Part has 2 RESOURCE node [LOG 02:33:38.870] [WeldingTool] ..RESOURCE add: LiquidFuel 341.3334/341.3334 [LOG 02:33:38.870] [WeldingTool] ..RESOURCE add: Oxidizer 417.1852/417.1852 [LOG 02:33:38.870] [WeldingTool] ..Config adapterMk3-Size2Slant has 8 MODULE node [LOG 02:33:38.870] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.870] [WeldingTool] | Module ready to add = True [LOG 02:33:38.870] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.870] [WeldingTool] | Module ready to add = True [LOG 02:33:38.870] [WeldingTool] | Module ready to add = True [LOG 02:33:38.870] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.870] [WeldingTool] | Module ready to add = True [LOG 02:33:38.870] [WeldingTool] | Module ready to add = True [LOG 02:33:38.870] [WeldingTool] | Module ready to add = True [LOG 02:33:38.870] [WeldingTool] | Module ready to add = True [LOG 02:33:38.870] [WeldingTool] | Module ready to add = True [LOG 02:33:38.870] [WeldingTool] | Module ready to add = True [LOG 02:33:38.870] [WeldingTool] | Module ready to add = True [LOG 02:33:38.870] [WeldingTool] | Module ready to add = True [LOG 02:33:38.870] [WeldingTool] | Module ready to add = True [LOG 02:33:38.870] [WeldingTool] | Module ready to add = True [LOG 02:33:38.870] [WeldingTool] | Module ready to add = True [LOG 02:33:38.870] [WeldingTool] | Module ready to add = True [LOG 02:33:38.870] [WeldingTool] | Module ready to add = True [LOG 02:33:38.870] [WeldingTool] | Module ready to add = True [LOG 02:33:38.870] [WeldingTool] | Module ready to add = True [LOG 02:33:38.870] [WeldingTool] | Module ready to add = True [LOG 02:33:38.870] [WeldingTool] | Module ready to add = True [LOG 02:33:38.870] [WeldingTool] | Module ready to add = True [LOG 02:33:38.870] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | ModuleCryoTank Module already exists!!! [LOG 02:33:38.871] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.871] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.871] [WeldingTool] | ModuleCryoTank - name is string [LOG 02:33:38.871] [WeldingTool] | ModuleCryoTank - name is merged with value ModuleCryoTank [LOG 02:33:38.871] [WeldingTool] | ModuleCryoTank - FuelName is string [LOG 02:33:38.871] [WeldingTool] | ModuleCryoTank - FuelName is merged with value LqdHydrogen [LOG 02:33:38.871] [WeldingTool] | ModuleCryoTank - BoiloffRate is float [LOG 02:33:38.871] [WeldingTool] | ModuleCryoTank - newValue - BoiloffRate = 0.05 [LOG 02:33:38.871] [WeldingTool] | ModuleCryoTank - existingValue - BoiloffRate = 0.2 [LOG 02:33:38.871] [WeldingTool] | ModuleCryoTank - BoiloffRate - added [LOG 02:33:38.871] [WeldingTool] | ModuleCryoTank - BoiloffRate is merged with value 0.25 [LOG 02:33:38.871] [WeldingTool] | ModuleCryoTank - CoolingCost is float [LOG 02:33:38.871] [WeldingTool] | ModuleCryoTank - newValue - CoolingCost = 0.08 [LOG 02:33:38.871] [WeldingTool] | ModuleCryoTank - CoolingCost is merged with value 0.08 [LOG 02:33:38.871] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.871] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.871] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.871] [WeldingTool] Values done [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | Module ready to add = True [LOG 02:33:38.871] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.871] [WeldingTool] ..Config adapterMk3-Size2Slant has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.871] [WeldingTool] ..Config adapterMk3-Size2Slant has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.871] [WeldingTool] ..Config adapterMk3-Size2Slant has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.871] [WeldingTool] ..Config adapterMk3-Size2Slant has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.871] [WeldingTool] .Part adapterMk3-Size2Slant has 2 Stack attach node(s) [LOG 02:33:38.871] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.871] [WeldingTool] New Center of Mass: (2.0, 11.1, 0.2) [LOG 02:33:38.871] [WeldingTool] Part crashTolerance: 50 - Global crashTolerance: 37.5713 - method: WeightedAverage [LOG 02:33:38.871] [WeldingTool] Part crashTolerance: 133.3333 - Global crashTolerance: 453.9656 - method: WeightedAverage [LOG 02:33:38.871] [WeldingTool] Part breakingTorque: 133.3333 - Global breakingTorque: 449.919 - method: WeightedAverage [LOG 02:33:38.871] [WeldingTool] Part maxTemp: 2600 - Global maxTemp: 2364.806 - method: WeightedAverage [LOG 02:33:38.871] [WeldingTool] Welding this part: pointyNoseConeB [LOG 02:33:38.871] [WeldingTool] ..part rescaleFactor 1.34 [LOG 02:33:38.871] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.871] [WeldingTool] pointyNoseConeB Attache mode STACK Attach method FIXED_JOINT [LOG 02:33:38.874] [WeldingTool] .Found 1 config files [LOG 02:33:38.874] [WeldingTool] ..Config pointyNoseConeB has 1 MODEL node [LOG 02:33:38.874] [WeldingTool] ..MODEL url: Squad/Parts/Aero/cones/ConeB [LOG 02:33:38.874] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.874] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.874] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.874] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.874] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.874] [WeldingTool] ..Childs count 1 [LOG 02:33:38.874] [WeldingTool] scaling info: rescaleFactor=1.34| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.874] [WeldingTool] ..newpart position (3.483, 0.999, 0.466) [LOG 02:33:38.874] [WeldingTool] ..newpart rotation (-0.383, 0.000, -0.924, 0.000) [LOG 02:33:38.874] [WeldingTool] ..newpart rotation.eulerAngles (0.000, 45.000, 180.000) [LOG 02:33:38.874] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 45.000, 0.000) [LOG 02:33:38.874] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.874] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.874] [WeldingTool] ..position (3.483, 0.999, 0.466) [LOG 02:33:38.874] [WeldingTool] ..rotation (0.000, 45.000, 180.000) [LOG 02:33:38.874] [WeldingTool] ..scale (1.340, 1.340, 1.340) [LOG 02:33:38.874] [WeldingTool] ..Part Part has 0 RESOURCE node [LOG 02:33:38.874] [WeldingTool] ..Config pointyNoseConeB has 6 MODULE node [LOG 02:33:38.875] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] [WeldingTool] ..MODULE add: ModuleAnimateHeat [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | Module ready to add = True [LOG 02:33:38.875] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.875] [WeldingTool] ..Config pointyNoseConeB has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.875] [WeldingTool] ..Config pointyNoseConeB has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.875] [WeldingTool] ..Config pointyNoseConeB has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.875] [WeldingTool] ..Config pointyNoseConeB has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.875] [WeldingTool] .Part pointyNoseConeB has 1 Stack attach node(s) [LOG 02:33:38.875] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.875] [WeldingTool] New Center of Mass: (2.0, 11.1, 0.2) [LOG 02:33:38.875] [WeldingTool] Part crashTolerance: 10 - Global crashTolerance: 37.43932 - method: WeightedAverage [LOG 02:33:38.875] [WeldingTool] Part crashTolerance: 39.5032 - Global crashTolerance: 451.9816 - method: WeightedAverage [LOG 02:33:38.875] [WeldingTool] Part breakingTorque: 39.5032 - Global breakingTorque: 447.9543 - method: WeightedAverage [LOG 02:33:38.875] [WeldingTool] Part maxTemp: 2000 - Global maxTemp: 2363.06 - method: WeightedAverage [LOG 02:33:38.875] [WeldingTool] Welding this part: mk3FuselageLFO.100 [LOG 02:33:38.875] [WeldingTool] ..part rescaleFactor 0.67 [LOG 02:33:38.875] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.875] [WeldingTool] mk3FuselageLFO.100 Attache mode SRF_ATTACH Attach method FIXED_JOINT [LOG 02:33:38.878] [WeldingTool] .Found 1 config files [LOG 02:33:38.878] [WeldingTool] ..Config mk3FuselageLFO_100 has 1 MODEL node [LOG 02:33:38.878] [WeldingTool] ..MODEL url: Squad/Parts/FuelTank/mk3Fuselage/LFO_100 [LOG 02:33:38.878] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.878] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.878] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.878] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.878] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.878] [WeldingTool] ..Childs count 5 [LOG 02:33:38.878] [WeldingTool] scaling info: rescaleFactor=0.6666667| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.878] [WeldingTool] ..newpart position (-3.900, 7.670, 0.466) [LOG 02:33:38.878] [WeldingTool] ..newpart rotation (0.000, 0.707, 0.000, -0.707) [LOG 02:33:38.878] [WeldingTool] ..newpart rotation.eulerAngles (0.000, 270.000, 0.000) [LOG 02:33:38.878] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 270.000, 0.000) [LOG 02:33:38.878] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.878] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.878] [WeldingTool] ..position (-3.900, 7.670, 0.466) [LOG 02:33:38.878] [WeldingTool] ..rotation (0.000, 270.000, 0.000) [LOG 02:33:38.878] [WeldingTool] ..scale (0.667, 0.667, 0.667) [LOG 02:33:38.878] [WeldingTool] ..Part Part has 2 RESOURCE node [LOG 02:33:38.878] [WeldingTool] ..RESOURCE add: LiquidFuel 1706.667/1706.667 [LOG 02:33:38.878] [WeldingTool] ..RESOURCE add: Oxidizer 2085.926/2085.926 [LOG 02:33:38.878] [WeldingTool] ..Config mk3FuselageLFO_100 has 8 MODULE node [LOG 02:33:38.878] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.878] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.878] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.878] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.878] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | ModuleCryoTank Module already exists!!! [LOG 02:33:38.879] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.879] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.879] [WeldingTool] | ModuleCryoTank - name is string [LOG 02:33:38.879] [WeldingTool] | ModuleCryoTank - name is merged with value ModuleCryoTank [LOG 02:33:38.879] [WeldingTool] | ModuleCryoTank - FuelName is string [LOG 02:33:38.879] [WeldingTool] | ModuleCryoTank - FuelName is merged with value LqdHydrogen [LOG 02:33:38.879] [WeldingTool] | ModuleCryoTank - BoiloffRate is float [LOG 02:33:38.879] [WeldingTool] | ModuleCryoTank - newValue - BoiloffRate = 0.05 [LOG 02:33:38.879] [WeldingTool] | ModuleCryoTank - existingValue - BoiloffRate = 0.25 [LOG 02:33:38.879] [WeldingTool] | ModuleCryoTank - BoiloffRate - added [LOG 02:33:38.879] [WeldingTool] | ModuleCryoTank - BoiloffRate is merged with value 0.3 [LOG 02:33:38.879] [WeldingTool] | ModuleCryoTank - CoolingCost is float [LOG 02:33:38.879] [WeldingTool] | ModuleCryoTank - newValue - CoolingCost = 0.08 [LOG 02:33:38.879] [WeldingTool] | ModuleCryoTank - CoolingCost is merged with value 0.08 [LOG 02:33:38.879] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.879] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.879] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.879] [WeldingTool] Values done [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | Module ready to add = True [LOG 02:33:38.879] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.879] [WeldingTool] ..Config mk3FuselageLFO_100 has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.879] [WeldingTool] ..Config mk3FuselageLFO_100 has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.879] [WeldingTool] ..Config mk3FuselageLFO_100 has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.879] [WeldingTool] ..Config mk3FuselageLFO_100 has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.879] [WeldingTool] .Part mk3FuselageLFO.100 has 2 Stack attach node(s) [LOG 02:33:38.879] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.879] [WeldingTool] New Center of Mass: (1.0, 10.6, 0.3) [LOG 02:33:38.879] [WeldingTool] Part crashTolerance: 50 - Global crashTolerance: 38.41539 - method: WeightedAverage [LOG 02:33:38.879] [WeldingTool] Part crashTolerance: 133.3333 - Global crashTolerance: 427.2199 - method: WeightedAverage [LOG 02:33:38.879] [WeldingTool] Part breakingTorque: 133.3333 - Global breakingTorque: 423.5056 - method: WeightedAverage [LOG 02:33:38.879] [WeldingTool] Part maxTemp: 2700 - Global maxTemp: 2389.243 - method: WeightedAverage [LOG 02:33:38.879] [WeldingTool] Welding this part: j.5m.nose [LOG 02:33:38.879] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.879] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.879] [WeldingTool] j.5m.nose Attache mode SRF_ATTACH Attach method FIXED_JOINT [LOG 02:33:38.882] [WeldingTool] .Found 1 config files [LOG 02:33:38.882] [WeldingTool] ..Config j_5m_nose has 1 MODEL node [LOG 02:33:38.882] [WeldingTool] ..MODEL url: OPT/Parts/main/j_5m_nose [LOG 02:33:38.882] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.882] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.882] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.882] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.882] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.882] [WeldingTool] ..Childs count 1 [LOG 02:33:38.882] [WeldingTool] scaling info: rescaleFactor=1| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.882] [WeldingTool] ..newpart position (-6.987, 7.973, 0.153) [LOG 02:33:38.882] [WeldingTool] ..newpart rotation (0.000, -0.259, 0.000, 0.966) [LOG 02:33:38.882] [WeldingTool] ..newpart rotation.eulerAngles (0.000, 330.000, 0.000) [LOG 02:33:38.882] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 60.000, 0.000) [LOG 02:33:38.882] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.882] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.882] [WeldingTool] ..position (-6.987, 7.973, 0.153) [LOG 02:33:38.882] [WeldingTool] ..rotation (0.000, 330.000, 0.000) [LOG 02:33:38.882] [WeldingTool] ..scale (1.000, 1.000, 1.000) [LOG 02:33:38.882] [WeldingTool] ..Part Part has 3 RESOURCE node [LOG 02:33:38.882] [WeldingTool] ..RESOURCE add: ElectricCharge 800/800 [LOG 02:33:38.882] [WeldingTool] ..RESOURCE add: LiquidFuel 360/360 [LOG 02:33:38.882] [WeldingTool] ..RESOURCE add: Oxidizer 440/440 [LOG 02:33:38.882] [WeldingTool] ..Config j_5m_nose has 11 MODULE node [LOG 02:33:38.882] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.882] [WeldingTool] | ModuleLiftingSurface Module already exists!!! [LOG 02:33:38.882] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.882] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.882] [WeldingTool] | ModuleLiftingSurface - name is string [LOG 02:33:38.882] [WeldingTool] | ModuleLiftingSurface - name is merged with value ModuleLiftingSurface [LOG 02:33:38.882] [WeldingTool] | ModuleLiftingSurface - deflectionLiftCoeff is float [LOG 02:33:38.882] [WeldingTool] | ModuleLiftingSurface - newValue - deflectionLiftCoeff = 1.929 [LOG 02:33:38.882] [WeldingTool] | ModuleLiftingSurface - existingValue - deflectionLiftCoeff = 15.469 [LOG 02:33:38.882] [WeldingTool] | ModuleLiftingSurface - deflectionLiftCoeff - added [LOG 02:33:38.882] [WeldingTool] | ModuleLiftingSurface - deflectionLiftCoeff is merged with value 17.398 [LOG 02:33:38.882] [WeldingTool] | ModuleLiftingSurface - dragAtMaxAoA is float [LOG 02:33:38.882] [WeldingTool] | ModuleLiftingSurface - newValue - dragAtMaxAoA = 0.847 [LOG 02:33:38.882] [WeldingTool] | ModuleLiftingSurface - existingValue - dragAtMaxAoA = 3.047 [LOG 02:33:38.882] [WeldingTool] | ModuleLiftingSurface - dragAtMaxAoA - added [LOG 02:33:38.882] [WeldingTool] | ModuleLiftingSurface - dragAtMaxAoA is merged with value 3.894 [LOG 02:33:38.882] [WeldingTool] | ModuleLiftingSurface - dragAtMinAoA is float [LOG 02:33:38.882] [WeldingTool] | ModuleLiftingSurface - newValue - dragAtMinAoA = 0.033 [LOG 02:33:38.882] [WeldingTool] | ModuleLiftingSurface - existingValue - dragAtMinAoA = 0.333 [LOG 02:33:38.882] [WeldingTool] | ModuleLiftingSurface - dragAtMinAoA - added [LOG 02:33:38.882] [WeldingTool] | ModuleLiftingSurface - dragAtMinAoA is merged with value 0.366 [LOG 02:33:38.882] [WeldingTool] | ModuleLiftingSurface - useInternalDragModel is bool [LOG 02:33:38.882] [WeldingTool] | ModuleLiftingSurface - useInternalDragModel is merged with value True [LOG 02:33:38.882] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.882] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.882] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.882] [WeldingTool] Values done [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | ModuleReactionWheel Module already exists!!! [LOG 02:33:38.883] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.883] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.883] [WeldingTool] | ModuleReactionWheel - name is string [LOG 02:33:38.883] [WeldingTool] | ModuleReactionWheel - name is merged with value ModuleReactionWheel [LOG 02:33:38.883] [WeldingTool] | ModuleReactionWheel - actionGUIName is string [LOG 02:33:38.883] [WeldingTool] | ModuleReactionWheel - actionGUIName is merged with value Toggle RW [LOG 02:33:38.883] [WeldingTool] | ModuleReactionWheel - PitchTorque is float [LOG 02:33:38.883] [WeldingTool] | ModuleReactionWheel - newValue - PitchTorque = 40 [LOG 02:33:38.883] [WeldingTool] | ModuleReactionWheel - existingValue - PitchTorque = 85 [LOG 02:33:38.883] [WeldingTool] | ModuleReactionWheel - PitchTorque - added [LOG 02:33:38.883] [WeldingTool] | ModuleReactionWheel - PitchTorque is merged with value 125 [LOG 02:33:38.883] [WeldingTool] | ModuleReactionWheel - YawTorque is float [LOG 02:33:38.883] [WeldingTool] | ModuleReactionWheel - newValue - YawTorque = 20 [LOG 02:33:38.883] [WeldingTool] | ModuleReactionWheel - existingValue - YawTorque = 65 [LOG 02:33:38.883] [WeldingTool] | ModuleReactionWheel - YawTorque - added [LOG 02:33:38.883] [WeldingTool] | ModuleReactionWheel - YawTorque is merged with value 85 [LOG 02:33:38.883] [WeldingTool] | ModuleReactionWheel - RollTorque is float [LOG 02:33:38.883] [WeldingTool] | ModuleReactionWheel - newValue - RollTorque = 20 [LOG 02:33:38.883] [WeldingTool] | ModuleReactionWheel - existingValue - RollTorque = 65 [LOG 02:33:38.883] [WeldingTool] | ModuleReactionWheel - RollTorque - added [LOG 02:33:38.883] [WeldingTool] | ModuleReactionWheel - RollTorque is merged with value 85 [LOG 02:33:38.883] [WeldingTool] | ModuleReactionWheel - torqueResponseSpeed is float [LOG 02:33:38.883] [WeldingTool] | ModuleReactionWheel - newValue - torqueResponseSpeed = 15 [LOG 02:33:38.883] [WeldingTool] | ModuleReactionWheel - torqueResponseSpeed is merged with value 15 [LOG 02:33:38.883] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.883] [WeldingTool] | SubModule BreakingAttributes found = 0 [LOG 02:33:38.883] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.883] [WeldingTool] | ElectricCharge - name is string [LOG 02:33:38.883] [WeldingTool] | ElectricCharge - name is merged with value ElectricCharge [LOG 02:33:38.883] [WeldingTool] | ElectricCharge - rate is float [LOG 02:33:38.883] [WeldingTool] | ElectricCharge - newValue - rate = 0.5 [LOG 02:33:38.883] [WeldingTool] | ElectricCharge - existingValue - rate = 1.85 [LOG 02:33:38.883] [WeldingTool] | ElectricCharge - rate - added [LOG 02:33:38.883] [WeldingTool] | ElectricCharge - rate is merged with value 2.35 [LOG 02:33:38.883] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.883] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.883] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.883] [WeldingTool] Values done [LOG 02:33:38.883] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.883] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.883] [WeldingTool] Values done [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | ModuleSAS Module already exists!!! [LOG 02:33:38.883] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.883] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.883] [WeldingTool] | ModuleSAS - name is string [LOG 02:33:38.883] [WeldingTool] | ModuleSAS - name is merged with value ModuleSAS [LOG 02:33:38.883] [WeldingTool] | ModuleSAS - SASServiceLevel is float [LOG 02:33:38.883] [WeldingTool] | ModuleSAS - newValue - SASServiceLevel = 3 [LOG 02:33:38.883] [WeldingTool] | ModuleSAS - existingValue - SASServiceLevel = 3 [LOG 02:33:38.883] [WeldingTool] | ModuleSAS - SASServiceLevel - maximized [LOG 02:33:38.883] [WeldingTool] | ModuleSAS - SASServiceLevel is merged with value 3 [LOG 02:33:38.883] [WeldingTool] | ModuleSAS - standalone is bool [LOG 02:33:38.883] [WeldingTool] | ModuleSAS - standalone is merged with value True [LOG 02:33:38.883] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.883] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.883] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.883] [WeldingTool] Values done [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | Module ready to add = True [LOG 02:33:38.883] [WeldingTool] | ModuleKerbNetAccess Module already exists!!! [LOG 02:33:38.883] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.883] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.883] [WeldingTool] | ModuleKerbNetAccess - name is string [LOG 02:33:38.883] [WeldingTool] | ModuleKerbNetAccess - name is merged with value ModuleKerbNetAccess [LOG 02:33:38.883] [WeldingTool] | ModuleKerbNetAccess - MinimumFoV is float [LOG 02:33:38.883] [WeldingTool] | ModuleKerbNetAccess - newValue - MinimumFoV = 5 [LOG 02:33:38.883] [WeldingTool] | ModuleKerbNetAccess - existingValue - MinimumFoV = 5 [LOG 02:33:38.884] [WeldingTool] | ModuleKerbNetAccess - MinimumFoV - minimized [LOG 02:33:38.884] [WeldingTool] | ModuleKerbNetAccess - MinimumFoV is merged with value 5 [LOG 02:33:38.884] [WeldingTool] | ModuleKerbNetAccess - MaximumFoV is float [LOG 02:33:38.884] [WeldingTool] | ModuleKerbNetAccess - newValue - MaximumFoV = 90 [LOG 02:33:38.884] [WeldingTool] | ModuleKerbNetAccess - existingValue - MaximumFoV = 90 [LOG 02:33:38.884] [WeldingTool] | ModuleKerbNetAccess - MaximumFoV - maximized [LOG 02:33:38.884] [WeldingTool] | ModuleKerbNetAccess - MaximumFoV is merged with value 90 [LOG 02:33:38.884] [WeldingTool] | ModuleKerbNetAccess - AnomalyDetection is float [LOG 02:33:38.884] [WeldingTool] | ModuleKerbNetAccess - newValue - AnomalyDetection = 0.3 [LOG 02:33:38.884] [WeldingTool] | ModuleKerbNetAccess - existingValue - AnomalyDetection = 0.3 [LOG 02:33:38.884] [WeldingTool] | ModuleKerbNetAccess - AnomalyDetection - added [LOG 02:33:38.884] [WeldingTool] | ModuleKerbNetAccess - AnomalyDetection is merged with value 0.6 [LOG 02:33:38.884] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.884] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.884] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.884] [WeldingTool] Values done [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | AYA_SAS Module already exists!!! [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | ModuleResourceActions2 Module already exists!!! [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | Module ready to add = True [LOG 02:33:38.884] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.884] [WeldingTool] ..Config j_5m_nose has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.884] [WeldingTool] ..Config j_5m_nose has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.884] [WeldingTool] ..Config j_5m_nose has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.884] [WeldingTool] ..Config j_5m_nose has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.884] [WeldingTool] .Part j.5m.nose has 1 Stack attach node(s) [LOG 02:33:38.884] [WeldingTool] ..set relative position =(-6.987, 7.973, 0.153) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.884] [WeldingTool] .Stack Node Add: bottomj.5m.nose26 [LOG 02:33:38.884] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.884] [WeldingTool] New Center of Mass: (0.7, 10.5, 0.3) [LOG 02:33:38.884] [WeldingTool] Part crashTolerance: 20 - Global crashTolerance: 37.14196 - method: WeightedAverage [LOG 02:33:38.884] [WeldingTool] Part crashTolerance: 600 - Global crashTolerance: 439.1676 - method: WeightedAverage [LOG 02:33:38.884] [WeldingTool] Part breakingTorque: 550 - Global breakingTorque: 432.2527 - method: WeightedAverage [LOG 02:33:38.884] [WeldingTool] Part maxTemp: 1650 - Global maxTemp: 2338.124 - method: WeightedAverage [LOG 02:33:38.884] [WeldingTool] Welding this part: B9.Aero.HL.Body.Tail.8m [LOG 02:33:38.884] [WeldingTool] ..part rescaleFactor 0.67 [LOG 02:33:38.884] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.884] [WeldingTool] B9.Aero.HL.Body.Tail.8m Attache mode STACK Attach method FIXED_JOINT [LOG 02:33:38.887] [WeldingTool] .Found 1 config files [LOG 02:33:38.887] [WeldingTool] ..Config B9_Aero_HL_Body_Tail_8m has 1 MODEL node [LOG 02:33:38.887] [WeldingTool] ..MODEL url: B9_Aerospace/Parts/Aero_HL_Body/8m-Universal-Tail [LOG 02:33:38.887] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.887] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.887] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.887] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.887] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.887] [WeldingTool] ..Childs count 1 [LOG 02:33:38.887] [WeldingTool] scaling info: rescaleFactor=0.6666667| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.887] [WeldingTool] ..newpart position (-3.900, 13.003, 0.466) [LOG 02:33:38.887] [WeldingTool] ..newpart rotation (0.707, 0.000, 0.707, 0.000) [LOG 02:33:38.887] [WeldingTool] ..newpart rotation.eulerAngles (0.000, 90.000, 180.000) [LOG 02:33:38.887] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 180.000, 180.000) [LOG 02:33:38.887] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.887] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.887] [WeldingTool] ..position (-3.900, 13.003, 0.466) [LOG 02:33:38.887] [WeldingTool] ..rotation (0.000, 90.000, 180.000) [LOG 02:33:38.887] [WeldingTool] ..scale (0.667, 0.667, 0.667) [LOG 02:33:38.887] [WeldingTool] ..Part Part has 2 RESOURCE node [LOG 02:33:38.887] [WeldingTool] ..RESOURCE add: LiquidFuel 949.3334/949.3334 [LOG 02:33:38.887] [WeldingTool] ..RESOURCE add: Oxidizer 1160.296/1160.296 [LOG 02:33:38.887] [WeldingTool] ..Config B9_Aero_HL_Body_Tail_8m has 9 MODULE node [LOG 02:33:38.887] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.887] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | ModuleCryoTank Module already exists!!! [LOG 02:33:38.888] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.888] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.888] [WeldingTool] | ModuleCryoTank - name is string [LOG 02:33:38.888] [WeldingTool] | ModuleCryoTank - name is merged with value ModuleCryoTank [LOG 02:33:38.888] [WeldingTool] | ModuleCryoTank - FuelName is string [LOG 02:33:38.888] [WeldingTool] | ModuleCryoTank - FuelName is merged with value LqdHydrogen [LOG 02:33:38.888] [WeldingTool] | ModuleCryoTank - BoiloffRate is float [LOG 02:33:38.888] [WeldingTool] | ModuleCryoTank - newValue - BoiloffRate = 0.05 [LOG 02:33:38.888] [WeldingTool] | ModuleCryoTank - existingValue - BoiloffRate = 0.3 [LOG 02:33:38.888] [WeldingTool] | ModuleCryoTank - BoiloffRate - added [LOG 02:33:38.888] [WeldingTool] | ModuleCryoTank - BoiloffRate is merged with value 0.35 [LOG 02:33:38.888] [WeldingTool] | ModuleCryoTank - CoolingCost is float [LOG 02:33:38.888] [WeldingTool] | ModuleCryoTank - newValue - CoolingCost = 0.08 [LOG 02:33:38.888] [WeldingTool] | ModuleCryoTank - CoolingCost is merged with value 0.08 [LOG 02:33:38.888] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.888] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.888] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.888] [WeldingTool] Values done [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | Module ready to add = True [LOG 02:33:38.888] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.888] [WeldingTool] ..Config B9_Aero_HL_Body_Tail_8m has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.888] [WeldingTool] ..Config B9_Aero_HL_Body_Tail_8m has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.888] [WeldingTool] ..Config B9_Aero_HL_Body_Tail_8m has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.888] [WeldingTool] ..Config B9_Aero_HL_Body_Tail_8m has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.888] [WeldingTool] .Part B9.Aero.HL.Body.Tail.8m has 1 Stack attach node(s) [LOG 02:33:38.888] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.888] [WeldingTool] New Center of Mass: (0.3, 10.7, 0.3) [LOG 02:33:38.888] [WeldingTool] Part crashTolerance: 30 - Global crashTolerance: 36.73723 - method: WeightedAverage [LOG 02:33:38.888] [WeldingTool] Part crashTolerance: 1227.556 - Global crashTolerance: 483.8455 - method: WeightedAverage [LOG 02:33:38.888] [WeldingTool] Part breakingTorque: 1227.556 - Global breakingTorque: 477.3224 - method: WeightedAverage [LOG 02:33:38.888] [WeldingTool] Part maxTemp: 2500 - Global maxTemp: 2347.298 - method: WeightedAverage [LOG 02:33:38.888] [WeldingTool] Welding this part: mk2FuselageLongLFO [LOG 02:33:38.888] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.888] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.888] [WeldingTool] mk2FuselageLongLFO Attache mode SRF_ATTACH Attach method FIXED_JOINT [LOG 02:33:38.891] [WeldingTool] .Found 1 config files [LOG 02:33:38.891] [WeldingTool] ..Config mk2FuselageLongLFO has 1 MODEL node [LOG 02:33:38.891] [WeldingTool] ..MODEL url: Squad/Parts/FuelTank/mk2FuselageLong/FuselageLongLFO [LOG 02:33:38.891] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.891] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.891] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.891] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.891] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.891] [WeldingTool] ..Childs count 3 [LOG 02:33:38.891] [WeldingTool] scaling info: rescaleFactor=1| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.891] [WeldingTool] ..newpart position (-5.300, 10.770, 0.566) [LOG 02:33:38.891] [WeldingTool] ..newpart rotation (0.011, 0.042, -0.865, -0.500) [LOG 02:33:38.891] [WeldingTool] ..newpart rotation.eulerAngles (3.533, 356.460, 119.891) [LOG 02:33:38.891] [WeldingTool] ..newpart rotation.localEulerAngles (3.533, 86.460, 119.891) [LOG 02:33:38.891] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.891] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.891] [WeldingTool] ..position (-5.300, 10.770, 0.566) [LOG 02:33:38.891] [WeldingTool] ..rotation (3.533, 356.460, 119.891) [LOG 02:33:38.891] [WeldingTool] ..scale (1.000, 1.000, 1.000) [LOG 02:33:38.891] [WeldingTool] ..Part Part has 2 RESOURCE node [LOG 02:33:38.891] [WeldingTool] ..RESOURCE add: LiquidFuel 360/360 [LOG 02:33:38.891] [WeldingTool] ..RESOURCE add: Oxidizer 440/440 [LOG 02:33:38.891] [WeldingTool] ..Config mk2FuselageLongLFO has 9 MODULE node [LOG 02:33:38.891] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.891] [WeldingTool] | ModuleLiftingSurface Module already exists!!! [LOG 02:33:38.891] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.891] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.891] [WeldingTool] | ModuleLiftingSurface - name is string [LOG 02:33:38.891] [WeldingTool] | ModuleLiftingSurface - name is merged with value ModuleLiftingSurface [LOG 02:33:38.891] [WeldingTool] | ModuleLiftingSurface - useInternalDragModel is bool [LOG 02:33:38.891] [WeldingTool] | ModuleLiftingSurface - useInternalDragModel is merged with value True [LOG 02:33:38.891] [WeldingTool] | ModuleLiftingSurface - deflectionLiftCoeff is float [LOG 02:33:38.891] [WeldingTool] | ModuleLiftingSurface - newValue - deflectionLiftCoeff = 0.7 [LOG 02:33:38.891] [WeldingTool] | ModuleLiftingSurface - existingValue - deflectionLiftCoeff = 17.398 [LOG 02:33:38.891] [WeldingTool] | ModuleLiftingSurface - deflectionLiftCoeff - added [LOG 02:33:38.891] [WeldingTool] | ModuleLiftingSurface - deflectionLiftCoeff is merged with value 18.098 [LOG 02:33:38.891] [WeldingTool] | ModuleLiftingSurface - dragAtMaxAoA is float [LOG 02:33:38.891] [WeldingTool] | ModuleLiftingSurface - newValue - dragAtMaxAoA = 0.3 [LOG 02:33:38.891] [WeldingTool] | ModuleLiftingSurface - existingValue - dragAtMaxAoA = 3.894 [LOG 02:33:38.891] [WeldingTool] | ModuleLiftingSurface - dragAtMaxAoA - added [LOG 02:33:38.891] [WeldingTool] | ModuleLiftingSurface - dragAtMaxAoA is merged with value 4.194 [LOG 02:33:38.891] [WeldingTool] | ModuleLiftingSurface - dragAtMinAoA is float [LOG 02:33:38.891] [WeldingTool] | ModuleLiftingSurface - newValue - dragAtMinAoA = 0.1 [LOG 02:33:38.891] [WeldingTool] | ModuleLiftingSurface - existingValue - dragAtMinAoA = 0.366 [LOG 02:33:38.891] [WeldingTool] | ModuleLiftingSurface - dragAtMinAoA - added [LOG 02:33:38.891] [WeldingTool] | ModuleLiftingSurface - dragAtMinAoA is merged with value 0.466 [LOG 02:33:38.891] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.891] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.891] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.891] [WeldingTool] Values done [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.891] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | ModuleCryoTank Module already exists!!! [LOG 02:33:38.892] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.892] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.892] [WeldingTool] | ModuleCryoTank - name is string [LOG 02:33:38.892] [WeldingTool] | ModuleCryoTank - name is merged with value ModuleCryoTank [LOG 02:33:38.892] [WeldingTool] | ModuleCryoTank - FuelName is string [LOG 02:33:38.892] [WeldingTool] | ModuleCryoTank - FuelName is merged with value LqdHydrogen [LOG 02:33:38.892] [WeldingTool] | ModuleCryoTank - BoiloffRate is float [LOG 02:33:38.892] [WeldingTool] | ModuleCryoTank - newValue - BoiloffRate = 0.05 [LOG 02:33:38.892] [WeldingTool] | ModuleCryoTank - existingValue - BoiloffRate = 0.35 [LOG 02:33:38.892] [WeldingTool] | ModuleCryoTank - BoiloffRate - added [LOG 02:33:38.892] [WeldingTool] | ModuleCryoTank - BoiloffRate is merged with value 0.4 [LOG 02:33:38.892] [WeldingTool] | ModuleCryoTank - CoolingCost is float [LOG 02:33:38.892] [WeldingTool] | ModuleCryoTank - newValue - CoolingCost = 0.08 [LOG 02:33:38.892] [WeldingTool] | ModuleCryoTank - CoolingCost is merged with value 0.08 [LOG 02:33:38.892] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.892] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.892] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.892] [WeldingTool] Values done [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | Module ready to add = True [LOG 02:33:38.892] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.892] [WeldingTool] ..Config mk2FuselageLongLFO has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.892] [WeldingTool] ..Config mk2FuselageLongLFO has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.892] [WeldingTool] ..Config mk2FuselageLongLFO has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.892] [WeldingTool] ..Config mk2FuselageLongLFO has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.892] [WeldingTool] .Part mk2FuselageLongLFO has 2 Stack attach node(s) [LOG 02:33:38.892] [WeldingTool] ..set relative position =(-5.300, 10.770, 0.566) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.892] [WeldingTool] .Stack Node Add: topmk2FuselageLongLFO28 [LOG 02:33:38.892] [WeldingTool] ..set relative position =(-5.300, 10.770, 0.566) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.892] [WeldingTool] .Stack Node Add: bottommk2FuselageLongLFO28 [LOG 02:33:38.892] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.892] [WeldingTool] New Center of Mass: (0.1, 10.7, 0.3) [LOG 02:33:38.892] [WeldingTool] Part crashTolerance: 50 - Global crashTolerance: 36.92542 - method: WeightedAverage [LOG 02:33:38.892] [WeldingTool] Part crashTolerance: 50 - Global crashTolerance: 477.6895 - method: WeightedAverage [LOG 02:33:38.892] [WeldingTool] Part breakingTorque: 50 - Global breakingTorque: 471.259 - method: WeightedAverage [LOG 02:33:38.892] [WeldingTool] Part maxTemp: 2500 - Global maxTemp: 2349.464 - method: WeightedAverage [LOG 02:33:38.892] [WeldingTool] Welding this part: M3X.WingSegmentE [LOG 02:33:38.892] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.892] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.892] [WeldingTool] M3X.WingSegmentE Attache mode SRF_ATTACH Attach method FIXED_JOINT [LOG 02:33:38.895] [WeldingTool] .Found 1 config files [LOG 02:33:38.895] [WeldingTool] ..Config M3X_WingSegmentE has 1 MODEL node [LOG 02:33:38.895] [WeldingTool] ..MODEL url: Mk3Expansion/Parts/Aero/BigSWings/SegmentE [LOG 02:33:38.895] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.895] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.895] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.895] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.895] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.895] [WeldingTool] ..Childs count 1 [LOG 02:33:38.895] [WeldingTool] scaling info: rescaleFactor=1| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.895] [WeldingTool] ..newpart position (-6.200, 10.270, 0.047) [LOG 02:33:38.895] [WeldingTool] ..newpart rotation (0.501, 0.864, 0.020, 0.049) [LOG 02:33:38.895] [WeldingTool] ..newpart rotation.eulerAngles (0.803, 173.970, 60.169) [LOG 02:33:38.895] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 185.000, 180.000) [LOG 02:33:38.895] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.895] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.895] [WeldingTool] ..position (-6.200, 10.270, 0.047) [LOG 02:33:38.895] [WeldingTool] ..rotation (0.803, 173.970, 60.169) [LOG 02:33:38.895] [WeldingTool] ..scale (1.000, 1.000, 1.000) [LOG 02:33:38.895] [WeldingTool] ..texture ShuttleWings, Squad/Parts/Aero/shuttleWings/ShuttleWings [LOG 02:33:38.895] [WeldingTool] ..Part Part has 1 RESOURCE node [LOG 02:33:38.895] [WeldingTool] ..RESOURCE add: LiquidFuel 0/150 [LOG 02:33:38.895] [WeldingTool] ..Config M3X_WingSegmentE has 7 MODULE node [LOG 02:33:38.895] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.895] [WeldingTool] | ModuleLiftingSurface Module already exists!!! [LOG 02:33:38.895] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.895] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.895] [WeldingTool] | ModuleLiftingSurface - name is string [LOG 02:33:38.895] [WeldingTool] | ModuleLiftingSurface - name is merged with value ModuleLiftingSurface [LOG 02:33:38.895] [WeldingTool] | ModuleLiftingSurface - useInternalDragModel is bool [LOG 02:33:38.895] [WeldingTool] | ModuleLiftingSurface - useInternalDragModel is merged with value True [LOG 02:33:38.895] [WeldingTool] | ModuleLiftingSurface - deflectionLiftCoeff is float [LOG 02:33:38.895] [WeldingTool] | ModuleLiftingSurface - newValue - deflectionLiftCoeff = 3.08 [LOG 02:33:38.895] [WeldingTool] | ModuleLiftingSurface - existingValue - deflectionLiftCoeff = 18.098 [LOG 02:33:38.895] [WeldingTool] | ModuleLiftingSurface - deflectionLiftCoeff - added [LOG 02:33:38.895] [WeldingTool] | ModuleLiftingSurface - deflectionLiftCoeff is merged with value 21.178 [LOG 02:33:38.895] [WeldingTool] | ModuleLiftingSurface - dragAtMaxAoA is float [LOG 02:33:38.895] [WeldingTool] | ModuleLiftingSurface - newValue - dragAtMaxAoA = 1 [LOG 02:33:38.895] [WeldingTool] | ModuleLiftingSurface - existingValue - dragAtMaxAoA = 4.194 [LOG 02:33:38.895] [WeldingTool] | ModuleLiftingSurface - dragAtMaxAoA - added [LOG 02:33:38.895] [WeldingTool] | ModuleLiftingSurface - dragAtMaxAoA is merged with value 5.194 [LOG 02:33:38.895] [WeldingTool] | ModuleLiftingSurface - dragAtMinAoA is float [LOG 02:33:38.895] [WeldingTool] | ModuleLiftingSurface - newValue - dragAtMinAoA = 0 [LOG 02:33:38.895] [WeldingTool] | ModuleLiftingSurface - existingValue - dragAtMinAoA = 0.466 [LOG 02:33:38.895] [WeldingTool] | ModuleLiftingSurface - dragAtMinAoA - added [LOG 02:33:38.895] [WeldingTool] | ModuleLiftingSurface - dragAtMinAoA is merged with value 0.466 [LOG 02:33:38.895] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.895] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.895] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.895] [WeldingTool] Values done [LOG 02:33:38.895] [WeldingTool] | Module ready to add = True [LOG 02:33:38.895] [WeldingTool] | Module ready to add = True [LOG 02:33:38.895] [WeldingTool] | Module ready to add = True [LOG 02:33:38.895] [WeldingTool] | Module ready to add = True [LOG 02:33:38.895] [WeldingTool] | Module ready to add = True [LOG 02:33:38.895] [WeldingTool] | Module ready to add = True [LOG 02:33:38.895] [WeldingTool] | Module ready to add = True [LOG 02:33:38.895] [WeldingTool] | Module ready to add = True [LOG 02:33:38.895] [WeldingTool] | Module ready to add = True [LOG 02:33:38.895] [WeldingTool] | Module ready to add = True [LOG 02:33:38.895] [WeldingTool] | Module ready to add = True [LOG 02:33:38.895] [WeldingTool] | Module ready to add = True [LOG 02:33:38.895] [WeldingTool] | Module ready to add = True [LOG 02:33:38.896] [WeldingTool] | Module ready to add = True [LOG 02:33:38.896] [WeldingTool] | Module ready to add = True [LOG 02:33:38.896] [WeldingTool] | Module ready to add = True [LOG 02:33:38.896] [WeldingTool] | Module ready to add = True [LOG 02:33:38.896] [WeldingTool] | Module ready to add = True [LOG 02:33:38.896] [WeldingTool] | Module ready to add = True [LOG 02:33:38.896] [WeldingTool] | Module ready to add = True [LOG 02:33:38.896] [WeldingTool] | Module ready to add = True [LOG 02:33:38.896] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.896] [WeldingTool] | Module ready to add = True [LOG 02:33:38.896] [WeldingTool] | Module ready to add = True [LOG 02:33:38.896] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.896] [WeldingTool] | Module ready to add = True [LOG 02:33:38.896] [WeldingTool] | Module ready to add = True [LOG 02:33:38.896] [WeldingTool] | Module ready to add = True [LOG 02:33:38.896] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.896] [WeldingTool] | Module ready to add = True [LOG 02:33:38.896] [WeldingTool] | Module ready to add = True [LOG 02:33:38.896] [WeldingTool] | Module ready to add = True [LOG 02:33:38.896] [WeldingTool] | Module ready to add = True [LOG 02:33:38.896] [WeldingTool] | Module ready to add = True [LOG 02:33:38.896] [WeldingTool] | Module ready to add = True [LOG 02:33:38.896] [WeldingTool] | Module ready to add = True [LOG 02:33:38.896] [WeldingTool] | Module ready to add = True [LOG 02:33:38.896] [WeldingTool] | ModuleResourceActions2 Module already exists!!! [LOG 02:33:38.896] [WeldingTool] | Module ready to add = True [LOG 02:33:38.896] [WeldingTool] | Module ready to add = True [LOG 02:33:38.896] [WeldingTool] | Module ready to add = True [LOG 02:33:38.896] [WeldingTool] | Module ready to add = True [LOG 02:33:38.896] [WeldingTool] | Module ready to add = True [LOG 02:33:38.896] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.896] [WeldingTool] ..Config M3X_WingSegmentE has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.896] [WeldingTool] ..Config M3X_WingSegmentE has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.896] [WeldingTool] ..Config M3X_WingSegmentE has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.896] [WeldingTool] ..Config M3X_WingSegmentE has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.896] [WeldingTool] .Part M3X.WingSegmentE has 0 Stack attach node(s) [LOG 02:33:38.896] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.896] [WeldingTool] New Center of Mass: (0.1, 10.7, 0.3) [LOG 02:33:38.896] [WeldingTool] Part crashTolerance: 15 - Global crashTolerance: 36.77096 - method: WeightedAverage [LOG 02:33:38.896] [WeldingTool] Part crashTolerance: 22 - Global crashTolerance: 474.4794 - method: WeightedAverage [LOG 02:33:38.896] [WeldingTool] Part breakingTorque: 22 - Global breakingTorque: 468.0941 - method: WeightedAverage [LOG 02:33:38.896] [WeldingTool] Part maxTemp: 2400 - Global maxTemp: 2349.82 - method: WeightedAverage [LOG 02:33:38.896] [WeldingTool] Welding this part: sweptWing2 [LOG 02:33:38.896] [WeldingTool] ..part rescaleFactor 1.20 [LOG 02:33:38.896] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.896] [WeldingTool] sweptWing2 Attache mode SRF_ATTACH Attach method FIXED_JOINT [LOG 02:33:38.899] [WeldingTool] .Found 1 config files [LOG 02:33:38.899] [WeldingTool] ..Config sweptWing2 has 1 MODEL node [LOG 02:33:38.899] [WeldingTool] ..MODEL url: Squad/Parts/Aero/wings/swept2 [LOG 02:33:38.899] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.899] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.899] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.899] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.899] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.899] [WeldingTool] ..Childs count 1 [LOG 02:33:38.899] [WeldingTool] scaling info: rescaleFactor=1.2| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.899] [WeldingTool] ..newpart position (-6.550, 10.130, 1.076) [LOG 02:33:38.899] [WeldingTool] ..newpart rotation (0.525, 0.850, 0.029, 0.036) [LOG 02:33:38.899] [WeldingTool] ..newpart rotation.eulerAngles (359.358, 174.799, 63.503) [LOG 02:33:38.899] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 183.333, 183.333) [LOG 02:33:38.899] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.899] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.899] [WeldingTool] ..position (-6.550, 10.130, 1.076) [LOG 02:33:38.899] [WeldingTool] ..rotation (359.358, 174.799, 63.503) [LOG 02:33:38.899] [WeldingTool] ..scale (1.200, 1.200, 1.200) [LOG 02:33:38.899] [WeldingTool] ..Part Part has 0 RESOURCE node [LOG 02:33:38.899] [WeldingTool] ..Config sweptWing2 has 6 MODULE node [LOG 02:33:38.899] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.899] [WeldingTool] | ModuleLiftingSurface Module already exists!!! [LOG 02:33:38.899] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.899] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.899] [WeldingTool] | ModuleLiftingSurface - name is string [LOG 02:33:38.899] [WeldingTool] | ModuleLiftingSurface - name is merged with value ModuleLiftingSurface [LOG 02:33:38.899] [WeldingTool] | ModuleLiftingSurface - useInternalDragModel is bool [LOG 02:33:38.899] [WeldingTool] | ModuleLiftingSurface - useInternalDragModel is merged with value True [LOG 02:33:38.899] [WeldingTool] | ModuleLiftingSurface - deflectionLiftCoeff is float [LOG 02:33:38.899] [WeldingTool] | ModuleLiftingSurface - newValue - deflectionLiftCoeff = 2.26 [LOG 02:33:38.899] [WeldingTool] | ModuleLiftingSurface - existingValue - deflectionLiftCoeff = 21.178 [LOG 02:33:38.899] [WeldingTool] | ModuleLiftingSurface - deflectionLiftCoeff - added [LOG 02:33:38.899] [WeldingTool] | ModuleLiftingSurface - deflectionLiftCoeff is merged with value 23.438 [LOG 02:33:38.899] [WeldingTool] | ModuleLiftingSurface - dragAtMaxAoA is float [LOG 02:33:38.899] [WeldingTool] | ModuleLiftingSurface - newValue - dragAtMaxAoA = 0.3 [LOG 02:33:38.899] [WeldingTool] | ModuleLiftingSurface - existingValue - dragAtMaxAoA = 5.194 [LOG 02:33:38.899] [WeldingTool] | ModuleLiftingSurface - dragAtMaxAoA - added [LOG 02:33:38.899] [WeldingTool] | ModuleLiftingSurface - dragAtMaxAoA is merged with value 5.494 [LOG 02:33:38.899] [WeldingTool] | ModuleLiftingSurface - dragAtMinAoA is float [LOG 02:33:38.899] [WeldingTool] | ModuleLiftingSurface - newValue - dragAtMinAoA = 0 [LOG 02:33:38.899] [WeldingTool] | ModuleLiftingSurface - existingValue - dragAtMinAoA = 0.466 [LOG 02:33:38.899] [WeldingTool] | ModuleLiftingSurface - dragAtMinAoA - added [LOG 02:33:38.899] [WeldingTool] | ModuleLiftingSurface - dragAtMinAoA is merged with value 0.466 [LOG 02:33:38.899] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.899] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.899] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.899] [WeldingTool] Values done [LOG 02:33:38.899] [WeldingTool] | Module ready to add = True [LOG 02:33:38.899] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.899] [WeldingTool] | Module ready to add = True [LOG 02:33:38.899] [WeldingTool] | Module ready to add = True [LOG 02:33:38.899] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.899] [WeldingTool] | Module ready to add = True [LOG 02:33:38.899] [WeldingTool] | Module ready to add = True [LOG 02:33:38.899] [WeldingTool] | Module ready to add = True [LOG 02:33:38.899] [WeldingTool] | Module ready to add = True [LOG 02:33:38.899] [WeldingTool] | Module ready to add = True [LOG 02:33:38.899] [WeldingTool] | Module ready to add = True [LOG 02:33:38.899] [WeldingTool] | Module ready to add = True [LOG 02:33:38.900] [WeldingTool] | Module ready to add = True [LOG 02:33:38.900] [WeldingTool] | Module ready to add = True [LOG 02:33:38.900] [WeldingTool] | Module ready to add = True [LOG 02:33:38.900] [WeldingTool] | Module ready to add = True [LOG 02:33:38.900] [WeldingTool] | Module ready to add = True [LOG 02:33:38.900] [WeldingTool] | Module ready to add = True [LOG 02:33:38.900] [WeldingTool] | Module ready to add = True [LOG 02:33:38.900] [WeldingTool] | Module ready to add = True [LOG 02:33:38.900] [WeldingTool] | Module ready to add = True [LOG 02:33:38.900] [WeldingTool] | Module ready to add = True [LOG 02:33:38.900] [WeldingTool] | Module ready to add = True [LOG 02:33:38.900] [WeldingTool] | Module ready to add = True [LOG 02:33:38.900] [WeldingTool] | Module ready to add = True [LOG 02:33:38.900] [WeldingTool] | Module ready to add = True [LOG 02:33:38.900] [WeldingTool] | Module ready to add = True [LOG 02:33:38.900] [WeldingTool] | Module ready to add = True [LOG 02:33:38.900] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.900] [WeldingTool] | Module ready to add = True [LOG 02:33:38.900] [WeldingTool] | Module ready to add = True [LOG 02:33:38.900] [WeldingTool] | Module ready to add = True [LOG 02:33:38.900] [WeldingTool] | Module ready to add = True [LOG 02:33:38.900] [WeldingTool] | Module ready to add = True [LOG 02:33:38.900] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.900] [WeldingTool] ..Config sweptWing2 has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.900] [WeldingTool] ..Config sweptWing2 has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.900] [WeldingTool] ..Config sweptWing2 has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.900] [WeldingTool] ..Config sweptWing2 has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.900] [WeldingTool] .Part sweptWing2 has 0 Stack attach node(s) [LOG 02:33:38.900] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.900] [WeldingTool] New Center of Mass: (0.1, 10.7, 0.3) [LOG 02:33:38.900] [WeldingTool] Part crashTolerance: 15 - Global crashTolerance: 36.57313 - method: WeightedAverage [LOG 02:33:38.900] [WeldingTool] Part crashTolerance: 31.68 - Global crashTolerance: 470.4556 - method: WeightedAverage [LOG 02:33:38.900] [WeldingTool] Part breakingTorque: 31.68 - Global breakingTorque: 464.1284 - method: WeightedAverage [LOG 02:33:38.900] [WeldingTool] Part maxTemp: 2400 - Global maxTemp: 2350.276 - method: WeightedAverage [LOG 02:33:38.900] [WeldingTool] Welding this part: adapterMk3-Size2Slant [LOG 02:33:38.900] [WeldingTool] ..part rescaleFactor 0.67 [LOG 02:33:38.900] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.900] [WeldingTool] adapterMk3-Size2Slant Attache mode STACK Attach method FIXED_JOINT [LOG 02:33:38.902] [WeldingTool] .Found 1 config files [LOG 02:33:38.902] [WeldingTool] ..Config adapterMk3-Size2Slant has 1 MODEL node [LOG 02:33:38.902] [WeldingTool] ..MODEL url: Squad/Parts/FuelTank/adapterTanks/Mk3-Size2Slant [LOG 02:33:38.902] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.902] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.902] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.902] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.902] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.902] [WeldingTool] ..Childs count 2 [LOG 02:33:38.902] [WeldingTool] scaling info: rescaleFactor=0.6666667| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.903] [WeldingTool] ..newpart position (-3.900, 3.086, 0.466) [LOG 02:33:38.903] [WeldingTool] ..newpart rotation (0.707, 0.000, -0.707, 0.000) [LOG 02:33:38.903] [WeldingTool] ..newpart rotation.eulerAngles (0.000, 270.000, 180.000) [LOG 02:33:38.903] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 0.000, 180.000) [LOG 02:33:38.903] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.903] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.903] [WeldingTool] ..position (-3.900, 3.086, 0.466) [LOG 02:33:38.903] [WeldingTool] ..rotation (0.000, 270.000, 180.000) [LOG 02:33:38.903] [WeldingTool] ..scale (0.667, 0.667, 0.667) [LOG 02:33:38.903] [WeldingTool] ..Part Part has 2 RESOURCE node [LOG 02:33:38.903] [WeldingTool] ..RESOURCE add: LiquidFuel 341.3334/341.3334 [LOG 02:33:38.903] [WeldingTool] ..RESOURCE add: Oxidizer 417.1852/417.1852 [LOG 02:33:38.903] [WeldingTool] ..Config adapterMk3-Size2Slant has 8 MODULE node [LOG 02:33:38.903] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | Module ready to add = True [LOG 02:33:38.903] [WeldingTool] | ModuleCryoTank Module already exists!!! [LOG 02:33:38.903] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.903] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.903] [WeldingTool] | ModuleCryoTank - name is string [LOG 02:33:38.903] [WeldingTool] | ModuleCryoTank - name is merged with value ModuleCryoTank [LOG 02:33:38.903] [WeldingTool] | ModuleCryoTank - FuelName is string [LOG 02:33:38.903] [WeldingTool] | ModuleCryoTank - FuelName is merged with value LqdHydrogen [LOG 02:33:38.903] [WeldingTool] | ModuleCryoTank - BoiloffRate is float [LOG 02:33:38.904] [WeldingTool] | ModuleCryoTank - newValue - BoiloffRate = 0.05 [LOG 02:33:38.904] [WeldingTool] | ModuleCryoTank - existingValue - BoiloffRate = 0.4 [LOG 02:33:38.904] [WeldingTool] | ModuleCryoTank - BoiloffRate - added [LOG 02:33:38.904] [WeldingTool] | ModuleCryoTank - BoiloffRate is merged with value 0.45 [LOG 02:33:38.904] [WeldingTool] | ModuleCryoTank - CoolingCost is float [LOG 02:33:38.904] [WeldingTool] | ModuleCryoTank - newValue - CoolingCost = 0.08 [LOG 02:33:38.904] [WeldingTool] | ModuleCryoTank - CoolingCost is merged with value 0.08 [LOG 02:33:38.904] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.904] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.904] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.904] [WeldingTool] Values done [LOG 02:33:38.904] [WeldingTool] | Module ready to add = True [LOG 02:33:38.904] [WeldingTool] | Module ready to add = True [LOG 02:33:38.904] [WeldingTool] | Module ready to add = True [LOG 02:33:38.904] [WeldingTool] | Module ready to add = True [LOG 02:33:38.904] [WeldingTool] | Module ready to add = True [LOG 02:33:38.904] [WeldingTool] | Module ready to add = True [LOG 02:33:38.904] [WeldingTool] | Module ready to add = True [LOG 02:33:38.904] [WeldingTool] | Module ready to add = True [LOG 02:33:38.904] [WeldingTool] | Module ready to add = True [LOG 02:33:38.904] [WeldingTool] | Module ready to add = True [LOG 02:33:38.904] [WeldingTool] | Module ready to add = True [LOG 02:33:38.904] [WeldingTool] | Module ready to add = True [LOG 02:33:38.904] [WeldingTool] | Module ready to add = True [LOG 02:33:38.904] [WeldingTool] | Module ready to add = True [LOG 02:33:38.904] [WeldingTool] | Module ready to add = True [LOG 02:33:38.904] [WeldingTool] | Module ready to add = True [LOG 02:33:38.904] [WeldingTool] | Module ready to add = True [LOG 02:33:38.904] [WeldingTool] | Module ready to add = True [LOG 02:33:38.904] [WeldingTool] | Module ready to add = True [LOG 02:33:38.904] [WeldingTool] | Module ready to add = True [LOG 02:33:38.904] [WeldingTool] | Module ready to add = True [LOG 02:33:38.904] [WeldingTool] | Module ready to add = True [LOG 02:33:38.904] [WeldingTool] | Module ready to add = True [LOG 02:33:38.904] [WeldingTool] | Module ready to add = True [LOG 02:33:38.904] [WeldingTool] | Module ready to add = True [LOG 02:33:38.904] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.904] [WeldingTool] ..Config adapterMk3-Size2Slant has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.904] [WeldingTool] ..Config adapterMk3-Size2Slant has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.904] [WeldingTool] ..Config adapterMk3-Size2Slant has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.904] [WeldingTool] ..Config adapterMk3-Size2Slant has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.904] [WeldingTool] .Part adapterMk3-Size2Slant has 2 Stack attach node(s) [LOG 02:33:38.904] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.904] [WeldingTool] New Center of Mass: (0.0, 10.5, 0.3) [LOG 02:33:38.904] [WeldingTool] Part crashTolerance: 50 - Global crashTolerance: 36.74854 - method: WeightedAverage [LOG 02:33:38.904] [WeldingTool] Part crashTolerance: 133.3333 - Global crashTolerance: 466.0513 - method: WeightedAverage [LOG 02:33:38.904] [WeldingTool] Part breakingTorque: 133.3333 - Global breakingTorque: 459.8067 - method: WeightedAverage [LOG 02:33:38.904] [WeldingTool] Part maxTemp: 2600 - Global maxTemp: 2353.539 - method: WeightedAverage [LOG 02:33:38.904] [WeldingTool] Welding this part: pointyNoseConeB [LOG 02:33:38.904] [WeldingTool] ..part rescaleFactor 1.34 [LOG 02:33:38.904] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.904] [WeldingTool] pointyNoseConeB Attache mode STACK Attach method FIXED_JOINT [LOG 02:33:38.906] [WeldingTool] .Found 1 config files [LOG 02:33:38.906] [WeldingTool] ..Config pointyNoseConeB has 1 MODEL node [LOG 02:33:38.906] [WeldingTool] ..MODEL url: Squad/Parts/Aero/cones/ConeB [LOG 02:33:38.906] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.907] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.907] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.907] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.907] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.907] [WeldingTool] ..Childs count 1 [LOG 02:33:38.907] [WeldingTool] scaling info: rescaleFactor=1.34| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.907] [WeldingTool] ..newpart position (-3.483, 0.999, 0.466) [LOG 02:33:38.907] [WeldingTool] ..newpart rotation (0.383, 0.000, -0.924, 0.000) [LOG 02:33:38.907] [WeldingTool] ..newpart rotation.eulerAngles (0.000, 315.000, 180.000) [LOG 02:33:38.907] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 315.000, 0.000) [LOG 02:33:38.907] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.907] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.907] [WeldingTool] ..position (-3.483, 0.999, 0.466) [LOG 02:33:38.907] [WeldingTool] ..rotation (0.000, 315.000, 180.000) [LOG 02:33:38.907] [WeldingTool] ..scale (1.340, 1.340, 1.340) [LOG 02:33:38.907] [WeldingTool] ..Part Part has 0 RESOURCE node [LOG 02:33:38.907] [WeldingTool] ..Config pointyNoseConeB has 6 MODULE node [LOG 02:33:38.907] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | ModuleAnimateHeat Module already exists!!! [LOG 02:33:38.907] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.907] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.907] [WeldingTool] | ModuleAnimateHeat - name is string [LOG 02:33:38.907] [WeldingTool] | ModuleAnimateHeat - name is merged with value ModuleAnimateHeat [LOG 02:33:38.907] [WeldingTool] | ModuleAnimateHeat - ThermalAnim is string [LOG 02:33:38.907] [WeldingTool] | ModuleAnimateHeat - ThermalAnim is merged with value Cone_Heat [LOG 02:33:38.907] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.907] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.907] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.907] [WeldingTool] Values done [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | Module ready to add = True [LOG 02:33:38.907] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.907] [WeldingTool] ..Config pointyNoseConeB has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.907] [WeldingTool] ..Config pointyNoseConeB has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.907] [WeldingTool] ..Config pointyNoseConeB has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.907] [WeldingTool] ..Config pointyNoseConeB has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.907] [WeldingTool] .Part pointyNoseConeB has 1 Stack attach node(s) [LOG 02:33:38.908] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.908] [WeldingTool] New Center of Mass: (0.0, 10.5, 0.3) [LOG 02:33:38.908] [WeldingTool] Part crashTolerance: 10 - Global crashTolerance: 36.64964 - method: WeightedAverage [LOG 02:33:38.908] [WeldingTool] Part crashTolerance: 39.5032 - Global crashTolerance: 464.4742 - method: WeightedAverage [LOG 02:33:38.908] [WeldingTool] Part breakingTorque: 39.5032 - Global breakingTorque: 458.2526 - method: WeightedAverage [LOG 02:33:38.908] [WeldingTool] Part maxTemp: 2000 - Global maxTemp: 2352.232 - method: WeightedAverage [LOG 02:33:38.908] [WeldingTool] Welding this part: mk4fuselage-3 [LOG 02:33:38.908] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.908] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.908] [WeldingTool] mk4fuselage-3 Attache mode STACK Attach method FIXED_JOINT [LOG 02:33:38.910] [WeldingTool] .Found 1 config files [LOG 02:33:38.910] [WeldingTool] ..Config mk4fuselage-3 has 1 MODEL node [LOG 02:33:38.910] [WeldingTool] ..MODEL url: MarkIVSystem/Parts/Fuselage/mk4fuselage-3 [LOG 02:33:38.910] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.910] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.910] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.910] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.910] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.910] [WeldingTool] ..Childs count 4 [LOG 02:33:38.910] [WeldingTool] scaling info: rescaleFactor=1| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.910] [WeldingTool] ..newpart position (0.000, 2.625, 0.000) [LOG 02:33:38.910] [WeldingTool] ..newpart rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.910] [WeldingTool] ..newpart rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.910] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.910] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.910] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.910] [WeldingTool] ..position (0.000, 2.625, 0.000) [LOG 02:33:38.910] [WeldingTool] ..rotation (0.000, 0.000, 0.000) [LOG 02:33:38.910] [WeldingTool] ..scale (1.000, 1.000, 1.000) [LOG 02:33:38.910] [WeldingTool] ..Part Part has 2 RESOURCE node [LOG 02:33:38.910] [WeldingTool] ..RESOURCE add: LiquidFuel 1800/1800 [LOG 02:33:38.910] [WeldingTool] ..RESOURCE add: Oxidizer 2200/2200 [LOG 02:33:38.910] [WeldingTool] ..Config mk4fuselage-3 has 8 MODULE node [LOG 02:33:38.910] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.910] [WeldingTool] | Module ready to add = True [LOG 02:33:38.910] [WeldingTool] | Module ready to add = True [LOG 02:33:38.910] [WeldingTool] | Module ready to add = True [LOG 02:33:38.910] [WeldingTool] | Module ready to add = True [LOG 02:33:38.910] [WeldingTool] | Module ready to add = True [LOG 02:33:38.910] [WeldingTool] | Module ready to add = True [LOG 02:33:38.910] [WeldingTool] | Module ready to add = True [LOG 02:33:38.910] [WeldingTool] | Module ready to add = True [LOG 02:33:38.910] [WeldingTool] | Module ready to add = True [LOG 02:33:38.910] [WeldingTool] | Module ready to add = True [LOG 02:33:38.910] [WeldingTool] | Module ready to add = True [LOG 02:33:38.910] [WeldingTool] | Module ready to add = True [LOG 02:33:38.910] [WeldingTool] | Module ready to add = True [LOG 02:33:38.910] [WeldingTool] | Module ready to add = True [LOG 02:33:38.910] [WeldingTool] | Module ready to add = True [LOG 02:33:38.910] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | ModuleLiftingSurface Module already exists!!! [LOG 02:33:38.911] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.911] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.911] [WeldingTool] | ModuleLiftingSurface - name is string [LOG 02:33:38.911] [WeldingTool] | ModuleLiftingSurface - name is merged with value ModuleLiftingSurface [LOG 02:33:38.911] [WeldingTool] | ModuleLiftingSurface - useInternalDragModel is bool [LOG 02:33:38.911] [WeldingTool] | ModuleLiftingSurface - useInternalDragModel is merged with value True [LOG 02:33:38.911] [WeldingTool] | ModuleLiftingSurface - deflectionLiftCoeff is float [LOG 02:33:38.911] [WeldingTool] | ModuleLiftingSurface - newValue - deflectionLiftCoeff = 1.5 [LOG 02:33:38.911] [WeldingTool] | ModuleLiftingSurface - existingValue - deflectionLiftCoeff = 23.438 [LOG 02:33:38.911] [WeldingTool] | ModuleLiftingSurface - deflectionLiftCoeff - added [LOG 02:33:38.911] [WeldingTool] | ModuleLiftingSurface - deflectionLiftCoeff is merged with value 24.938 [LOG 02:33:38.911] [WeldingTool] | ModuleLiftingSurface - dragAtMaxAoA is float [LOG 02:33:38.911] [WeldingTool] | ModuleLiftingSurface - newValue - dragAtMaxAoA = 0.3 [LOG 02:33:38.911] [WeldingTool] | ModuleLiftingSurface - existingValue - dragAtMaxAoA = 5.494 [LOG 02:33:38.911] [WeldingTool] | ModuleLiftingSurface - dragAtMaxAoA - added [LOG 02:33:38.911] [WeldingTool] | ModuleLiftingSurface - dragAtMaxAoA is merged with value 5.794 [LOG 02:33:38.911] [WeldingTool] | ModuleLiftingSurface - dragAtMinAoA is float [LOG 02:33:38.911] [WeldingTool] | ModuleLiftingSurface - newValue - dragAtMinAoA = 0.1 [LOG 02:33:38.911] [WeldingTool] | ModuleLiftingSurface - existingValue - dragAtMinAoA = 0.466 [LOG 02:33:38.911] [WeldingTool] | ModuleLiftingSurface - dragAtMinAoA - added [LOG 02:33:38.911] [WeldingTool] | ModuleLiftingSurface - dragAtMinAoA is merged with value 0.566 [LOG 02:33:38.911] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.911] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.911] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.911] [WeldingTool] Values done [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | ModuleCryoTank Module already exists!!! [LOG 02:33:38.911] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.911] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.911] [WeldingTool] | ModuleCryoTank - name is string [LOG 02:33:38.911] [WeldingTool] | ModuleCryoTank - name is merged with value ModuleCryoTank [LOG 02:33:38.911] [WeldingTool] | ModuleCryoTank - FuelName is string [LOG 02:33:38.911] [WeldingTool] | ModuleCryoTank - FuelName is merged with value LqdHydrogen [LOG 02:33:38.911] [WeldingTool] | ModuleCryoTank - BoiloffRate is float [LOG 02:33:38.911] [WeldingTool] | ModuleCryoTank - newValue - BoiloffRate = 0.05 [LOG 02:33:38.911] [WeldingTool] | ModuleCryoTank - existingValue - BoiloffRate = 0.45 [LOG 02:33:38.911] [WeldingTool] | ModuleCryoTank - BoiloffRate - added [LOG 02:33:38.911] [WeldingTool] | ModuleCryoTank - BoiloffRate is merged with value 0.5 [LOG 02:33:38.911] [WeldingTool] | ModuleCryoTank - CoolingCost is float [LOG 02:33:38.911] [WeldingTool] | ModuleCryoTank - newValue - CoolingCost = 0.08 [LOG 02:33:38.911] [WeldingTool] | ModuleCryoTank - existingValue - CoolingCost = 0.08 [LOG 02:33:38.911] [WeldingTool] | ModuleCryoTank - CoolingCost - added [LOG 02:33:38.911] [WeldingTool] | ModuleCryoTank - CoolingCost is merged with value 0.16 [LOG 02:33:38.911] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.911] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.911] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.911] [WeldingTool] Values done [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.911] [WeldingTool] | Module ready to add = True [LOG 02:33:38.912] [WeldingTool] | Module ready to add = True [LOG 02:33:38.912] [WeldingTool] | Module ready to add = True [LOG 02:33:38.912] [WeldingTool] | Module ready to add = True [LOG 02:33:38.912] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.912] [WeldingTool] ..Config mk4fuselage-3 has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.912] [WeldingTool] ..Config mk4fuselage-3 has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.912] [WeldingTool] ..Config mk4fuselage-3 has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.912] [WeldingTool] ..Config mk4fuselage-3 has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.912] [WeldingTool] .Part mk4fuselage-3 has 2 Stack attach node(s) [LOG 02:33:38.912] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.912] [WeldingTool] New Center of Mass: (0.0, 9.5, 0.3) [LOG 02:33:38.912] [WeldingTool] Part crashTolerance: 50 - Global crashTolerance: 37.62289 - method: WeightedAverage [LOG 02:33:38.912] [WeldingTool] Part crashTolerance: 300 - Global crashTolerance: 452.4838 - method: WeightedAverage [LOG 02:33:38.912] [WeldingTool] Part breakingTorque: 300 - Global breakingTorque: 446.7158 - method: WeightedAverage [LOG 02:33:38.912] [WeldingTool] Part maxTemp: 2500 - Global maxTemp: 2363.004 - method: WeightedAverage [LOG 02:33:38.912] [WeldingTool] Welding this part: mk4tail-1 [LOG 02:33:38.912] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.912] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.912] [WeldingTool] mk4tail-1 Attache mode STACK Attach method FIXED_JOINT [LOG 02:33:38.914] [WeldingTool] .Found 1 config files [LOG 02:33:38.914] [WeldingTool] ..Config mk4tail-1 has 1 MODEL node [LOG 02:33:38.914] [WeldingTool] ..MODEL url: MarkIVSystem/Parts/Fuselage/mk4tail-1 [LOG 02:33:38.914] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.914] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.914] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.914] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.914] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.914] [WeldingTool] ..Childs count 1 [LOG 02:33:38.914] [WeldingTool] scaling info: rescaleFactor=1| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.914] [WeldingTool] ..newpart position (0.000, -0.203, 0.000) [LOG 02:33:38.914] [WeldingTool] ..newpart rotation (0.000, 0.000, 1.000, 0.000) [LOG 02:33:38.914] [WeldingTool] ..newpart rotation.eulerAngles (0.000, 0.000, 180.000) [LOG 02:33:38.914] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 0.000, 180.000) [LOG 02:33:38.914] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.914] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.914] [WeldingTool] ..position (0.000, -0.203, 0.000) [LOG 02:33:38.915] [WeldingTool] ..rotation (0.000, 0.000, 180.000) [LOG 02:33:38.915] [WeldingTool] ..scale (1.000, 1.000, 1.000) [LOG 02:33:38.915] [WeldingTool] ..Part Part has 3 RESOURCE node [LOG 02:33:38.915] [WeldingTool] ..RESOURCE add: LiquidFuel 1453.5/1453.5 [LOG 02:33:38.915] [WeldingTool] ..RESOURCE add: Oxidizer 1776.5/1776.5 [LOG 02:33:38.915] [WeldingTool] ..RESOURCE new: MonoPropellant 255/255 [LOG 02:33:38.915] [WeldingTool] ..Config mk4tail-1 has 7 MODULE node [LOG 02:33:38.915] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | ModuleLiftingSurface Module already exists!!! [LOG 02:33:38.915] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.915] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.915] [WeldingTool] | ModuleLiftingSurface - name is string [LOG 02:33:38.915] [WeldingTool] | ModuleLiftingSurface - name is merged with value ModuleLiftingSurface [LOG 02:33:38.915] [WeldingTool] | ModuleLiftingSurface - useInternalDragModel is bool [LOG 02:33:38.915] [WeldingTool] | ModuleLiftingSurface - useInternalDragModel is merged with value True [LOG 02:33:38.915] [WeldingTool] | ModuleLiftingSurface - deflectionLiftCoeff is float [LOG 02:33:38.915] [WeldingTool] | ModuleLiftingSurface - newValue - deflectionLiftCoeff = 1.5 [LOG 02:33:38.915] [WeldingTool] | ModuleLiftingSurface - existingValue - deflectionLiftCoeff = 24.938 [LOG 02:33:38.915] [WeldingTool] | ModuleLiftingSurface - deflectionLiftCoeff - added [LOG 02:33:38.915] [WeldingTool] | ModuleLiftingSurface - deflectionLiftCoeff is merged with value 26.438 [LOG 02:33:38.915] [WeldingTool] | ModuleLiftingSurface - dragAtMaxAoA is float [LOG 02:33:38.915] [WeldingTool] | ModuleLiftingSurface - newValue - dragAtMaxAoA = 0.3 [LOG 02:33:38.915] [WeldingTool] | ModuleLiftingSurface - existingValue - dragAtMaxAoA = 5.794 [LOG 02:33:38.915] [WeldingTool] | ModuleLiftingSurface - dragAtMaxAoA - added [LOG 02:33:38.915] [WeldingTool] | ModuleLiftingSurface - dragAtMaxAoA is merged with value 6.094 [LOG 02:33:38.915] [WeldingTool] | ModuleLiftingSurface - dragAtMinAoA is float [LOG 02:33:38.915] [WeldingTool] | ModuleLiftingSurface - newValue - dragAtMinAoA = 0.1 [LOG 02:33:38.915] [WeldingTool] | ModuleLiftingSurface - existingValue - dragAtMinAoA = 0.566 [LOG 02:33:38.915] [WeldingTool] | ModuleLiftingSurface - dragAtMinAoA - added [LOG 02:33:38.915] [WeldingTool] | ModuleLiftingSurface - dragAtMinAoA is merged with value 0.666 [LOG 02:33:38.915] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.915] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.915] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.915] [WeldingTool] Values done [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.915] [WeldingTool] | Module ready to add = True [LOG 02:33:38.916] [WeldingTool] | Module ready to add = True [LOG 02:33:38.916] [WeldingTool] | Module ready to add = True [LOG 02:33:38.916] [WeldingTool] | Module ready to add = True [LOG 02:33:38.916] [WeldingTool] | Module ready to add = True [LOG 02:33:38.916] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.916] [WeldingTool] ..Config mk4tail-1 has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.916] [WeldingTool] ..Config mk4tail-1 has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.916] [WeldingTool] ..Config mk4tail-1 has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.916] [WeldingTool] ..Config mk4tail-1 has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.916] [WeldingTool] .Part mk4tail-1 has 3 Stack attach node(s) [LOG 02:33:38.916] [WeldingTool] ..set relative position =(0.000, -0.203, 0.000) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.916] [WeldingTool] .Stack Node Add: top01mk4tail-134 [LOG 02:33:38.916] [WeldingTool] ..set relative position =(0.000, -0.203, 0.000) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.916] [WeldingTool] .Stack Node Add: top02mk4tail-134 [LOG 02:33:38.916] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.916] [WeldingTool] New Center of Mass: (0.0, 8.5, 0.2) [LOG 02:33:38.916] [WeldingTool] Part crashTolerance: 50 - Global crashTolerance: 38.40952 - method: WeightedAverage [LOG 02:33:38.916] [WeldingTool] Part crashTolerance: 300 - Global crashTolerance: 442.7927 - method: WeightedAverage [LOG 02:33:38.916] [WeldingTool] Part breakingTorque: 300 - Global breakingTorque: 437.3913 - method: WeightedAverage [LOG 02:33:38.916] [WeldingTool] Part maxTemp: 2500 - Global maxTemp: 2371.711 - method: WeightedAverage [LOG 02:33:38.916] [WeldingTool] Welding this part: KKAOSS.Storage.mid.g [LOG 02:33:38.916] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.916] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.916] [WeldingTool] KKAOSS.Storage.mid.g Attache mode SRF_ATTACH Attach method FIXED_JOINT [LOG 02:33:38.918] [WeldingTool] .Found 1 config files [LOG 02:33:38.918] [WeldingTool] ..Config KKAOSS_Storage_mid_g has 1 MODEL node [LOG 02:33:38.918] [WeldingTool] ..MODEL url: PlanetaryBaseInc/ContainerSystem/Storage_mid_g [LOG 02:33:38.918] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.918] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.918] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.918] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.918] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.918] [WeldingTool] ..Childs count 4 [LOG 02:33:38.918] [WeldingTool] scaling info: rescaleFactor=1| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.918] [WeldingTool] ..newpart position (1.300, 4.525, 0.600) [LOG 02:33:38.918] [WeldingTool] ..newpart rotation (0.707, 0.000, 0.000, 0.707) [LOG 02:33:38.918] [WeldingTool] ..newpart rotation.eulerAngles (90.000, 0.000, 0.000) [LOG 02:33:38.918] [WeldingTool] ..newpart rotation.localEulerAngles (90.000, 0.000, 0.000) [LOG 02:33:38.918] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.918] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.918] [WeldingTool] ..position (1.300, 4.525, 0.600) [LOG 02:33:38.918] [WeldingTool] ..rotation (90.000, 0.000, 0.000) [LOG 02:33:38.918] [WeldingTool] ..scale (1.000, 1.000, 1.000) [LOG 02:33:38.918] [WeldingTool] ..Part Part has 0 RESOURCE node [LOG 02:33:38.918] [WeldingTool] ..Config KKAOSS_Storage_mid_g has 4 MODULE node [LOG 02:33:38.918] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.918] [WeldingTool] | Module ready to add = True [LOG 02:33:38.918] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.918] [WeldingTool] | Module ready to add = True [LOG 02:33:38.918] [WeldingTool] | Module ready to add = True [LOG 02:33:38.918] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.918] [WeldingTool] | Module ready to add = True [LOG 02:33:38.918] [WeldingTool] | Module ready to add = True [LOG 02:33:38.918] [WeldingTool] | Module ready to add = True [LOG 02:33:38.918] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.918] [WeldingTool] | Module ready to add = True [LOG 02:33:38.919] [WeldingTool] | Module ready to add = True [LOG 02:33:38.919] [WeldingTool] | Module ready to add = True [LOG 02:33:38.919] [WeldingTool] | Module ready to add = True [LOG 02:33:38.919] [WeldingTool] | Module ready to add = True [LOG 02:33:38.919] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.919] [WeldingTool] ..Config KKAOSS_Storage_mid_g has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.919] [WeldingTool] ..Config KKAOSS_Storage_mid_g has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.919] [WeldingTool] ..Config KKAOSS_Storage_mid_g has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.919] [WeldingTool] ..Config KKAOSS_Storage_mid_g has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.919] [WeldingTool] .Part KKAOSS.Storage.mid.g has 8 Stack attach node(s) [LOG 02:33:38.919] [WeldingTool] ..set relative position =(1.300, 4.525, 0.600) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.919] [WeldingTool] .Stack Node Add: topKKAOSS.Storage.mid.g35 [LOG 02:33:38.919] [WeldingTool] ..set relative position =(1.300, 4.525, 0.600) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.919] [WeldingTool] .Stack Node Add: frontKKAOSS.Storage.mid.g35 [LOG 02:33:38.919] [WeldingTool] ..set relative position =(1.300, 4.525, 0.600) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.919] [WeldingTool] .Stack Node Add: backKKAOSS.Storage.mid.g35 [LOG 02:33:38.919] [WeldingTool] ..set relative position =(1.300, 4.525, 0.600) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.919] [WeldingTool] .Stack Node Add: left2KKAOSS.Storage.mid.g35 [LOG 02:33:38.919] [WeldingTool] ..set relative position =(1.300, 4.525, 0.600) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.919] [WeldingTool] .Stack Node Add: right1KKAOSS.Storage.mid.g35 [LOG 02:33:38.919] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.919] [WeldingTool] New Center of Mass: (0.0, 8.5, 0.2) [LOG 02:33:38.919] [WeldingTool] Part crashTolerance: 15 - Global crashTolerance: 38.27084 - method: WeightedAverage [LOG 02:33:38.919] [WeldingTool] Part crashTolerance: 22 - Global crashTolerance: 440.3 - method: WeightedAverage [LOG 02:33:38.919] [WeldingTool] Part breakingTorque: 22 - Global breakingTorque: 434.9306 - method: WeightedAverage [LOG 02:33:38.919] [WeldingTool] Part maxTemp: 2100 - Global maxTemp: 2370.101 - method: WeightedAverage [LOG 02:33:38.919] [WeldingTool] Welding this part: KKAOSS.LS.container.greenhouse [LOG 02:33:38.919] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.919] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.919] [WeldingTool] KKAOSS.LS.container.greenhouse Attache mode STACK Attach method FIXED_JOINT [LOG 02:33:38.921] [WeldingTool] .Found 1 config files [LOG 02:33:38.921] [WeldingTool] ..Config KKAOSS_LS_container_greenhouse has 1 MODEL node [LOG 02:33:38.921] [WeldingTool] ..MODEL url: PlanetaryBaseInc/ModSupport/Parts/LifeSupport/Container_Greenhouse [LOG 02:33:38.921] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.921] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.921] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.921] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.921] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.921] [WeldingTool] ..Childs count 1 [LOG 02:33:38.921] [WeldingTool] scaling info: rescaleFactor=1| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.921] [WeldingTool] ..newpart position (1.173, 4.644, 1.050) [LOG 02:33:38.921] [WeldingTool] ..newpart rotation (0.707, 0.000, 0.000, 0.707) [LOG 02:33:38.921] [WeldingTool] ..newpart rotation.eulerAngles (90.000, 0.000, 0.000) [LOG 02:33:38.921] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.921] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.921] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.921] [WeldingTool] ..position (1.173, 4.644, 1.050) [LOG 02:33:38.921] [WeldingTool] ..rotation (90.000, 0.000, 0.000) [LOG 02:33:38.921] [WeldingTool] ..scale (1.000, 1.000, 1.000) [LOG 02:33:38.921] [WeldingTool] ..Part Part has 3 RESOURCE node [LOG 02:33:38.921] [WeldingTool] ..RESOURCE add: Mulch 0/100 [LOG 02:33:38.921] [WeldingTool] ..RESOURCE add: Supplies 100/100 [LOG 02:33:38.921] [WeldingTool] ..RESOURCE add: Fertilizer 100/100 [LOG 02:33:38.921] [WeldingTool] ..Config KKAOSS_LS_container_greenhouse has 9 MODULE node [LOG 02:33:38.921] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.921] [WeldingTool] | Module ready to add = True [LOG 02:33:38.921] [WeldingTool] | Module ready to add = True [LOG 02:33:38.921] [WeldingTool] | Module ready to add = True [LOG 02:33:38.921] [WeldingTool] | Module ready to add = True [LOG 02:33:38.921] [WeldingTool] | Module ready to add = True [LOG 02:33:38.921] [WeldingTool] | Module ready to add = True [LOG 02:33:38.921] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] [WeldingTool] ..MODULE add: ModuleScienceExperiment [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] [WeldingTool] ..MODULE add: ModuleScienceContainer [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] [WeldingTool] ..MODULE add: AYA_Science [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] [WeldingTool] ..MODULE add: ModuleKPBSConverter [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.922] [WeldingTool] | Module ready to add = True [LOG 02:33:38.923] [WeldingTool] | Module ready to add = True [LOG 02:33:38.923] [WeldingTool] | Module ready to add = True [LOG 02:33:38.923] [WeldingTool] | Module ready to add = True [LOG 02:33:38.923] [WeldingTool] | Module ready to add = True [LOG 02:33:38.923] [WeldingTool] | ModuleResourceActions2 Module already exists!!! [LOG 02:33:38.923] [WeldingTool] | Module ready to add = True [LOG 02:33:38.923] [WeldingTool] | Module ready to add = True [LOG 02:33:38.923] [WeldingTool] | Module ready to add = True [LOG 02:33:38.923] [WeldingTool] | Module ready to add = True [LOG 02:33:38.923] [WeldingTool] | Module ready to add = True [LOG 02:33:38.923] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.923] [WeldingTool] ..Config KKAOSS_LS_container_greenhouse has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.923] [WeldingTool] ..Config KKAOSS_LS_container_greenhouse has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.923] [WeldingTool] ..Config KKAOSS_LS_container_greenhouse has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.923] [WeldingTool] ..Config KKAOSS_LS_container_greenhouse has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.923] [WeldingTool] .Part KKAOSS.LS.container.greenhouse has 1 Stack attach node(s) [LOG 02:33:38.923] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.923] [WeldingTool] New Center of Mass: (0.0, 8.5, 0.2) [LOG 02:33:38.923] [WeldingTool] Part crashTolerance: 15 - Global crashTolerance: 37.99837 - method: WeightedAverage [LOG 02:33:38.923] [WeldingTool] Part crashTolerance: 22 - Global crashTolerance: 435.4021 - method: WeightedAverage [LOG 02:33:38.923] [WeldingTool] Part breakingTorque: 22 - Global breakingTorque: 430.0956 - method: WeightedAverage [LOG 02:33:38.923] [WeldingTool] Part maxTemp: 2000 - Global maxTemp: 2365.768 - method: WeightedAverage [LOG 02:33:38.923] [WeldingTool] Welding this part: KKAOSS.LS.container.greenhouse [LOG 02:33:38.923] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.923] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.923] [WeldingTool] KKAOSS.LS.container.greenhouse Attache mode STACK Attach method FIXED_JOINT [LOG 02:33:38.925] [WeldingTool] .Found 1 config files [LOG 02:33:38.925] [WeldingTool] ..Config KKAOSS_LS_container_greenhouse has 1 MODEL node [LOG 02:33:38.925] [WeldingTool] ..MODEL url: PlanetaryBaseInc/ModSupport/Parts/LifeSupport/Container_Greenhouse [LOG 02:33:38.925] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.925] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.925] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.925] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.925] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.925] [WeldingTool] ..Childs count 1 [LOG 02:33:38.925] [WeldingTool] scaling info: rescaleFactor=1| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.925] [WeldingTool] ..newpart position (1.427, 4.644, 0.150) [LOG 02:33:38.925] [WeldingTool] ..newpart rotation (0.000, -0.707, 0.707, 0.000) [LOG 02:33:38.925] [WeldingTool] ..newpart rotation.eulerAngles (90.000, 180.000, 0.000) [LOG 02:33:38.925] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 0.000, 180.000) [LOG 02:33:38.925] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.925] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.925] [WeldingTool] ..position (1.427, 4.644, 0.150) [LOG 02:33:38.925] [WeldingTool] ..rotation (90.000, 180.000, 0.000) [LOG 02:33:38.925] [WeldingTool] ..scale (1.000, 1.000, 1.000) [LOG 02:33:38.925] [WeldingTool] ..Part Part has 3 RESOURCE node [LOG 02:33:38.925] [WeldingTool] ..RESOURCE add: Mulch 0/100 [LOG 02:33:38.925] [WeldingTool] ..RESOURCE add: Supplies 100/100 [LOG 02:33:38.926] [WeldingTool] ..RESOURCE add: Fertilizer 100/100 [LOG 02:33:38.926] [WeldingTool] ..Config KKAOSS_LS_container_greenhouse has 9 MODULE node [LOG 02:33:38.926] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.926] [WeldingTool] | Module ready to add = True [LOG 02:33:38.926] [WeldingTool] | Module ready to add = True [LOG 02:33:38.926] [WeldingTool] | Module ready to add = True [LOG 02:33:38.926] [WeldingTool] | Module ready to add = True [LOG 02:33:38.926] [WeldingTool] | Module ready to add = True [LOG 02:33:38.926] [WeldingTool] | Module ready to add = True [LOG 02:33:38.926] [WeldingTool] | Module ready to add = True [LOG 02:33:38.926] [WeldingTool] | Module ready to add = True [LOG 02:33:38.926] [WeldingTool] | Module ready to add = True [LOG 02:33:38.926] [WeldingTool] | Module ready to add = True [LOG 02:33:38.926] [WeldingTool] | Module ready to add = True [LOG 02:33:38.926] [WeldingTool] | Module ready to add = True [LOG 02:33:38.926] [WeldingTool] | Module ready to add = True [LOG 02:33:38.926] [WeldingTool] | Module ready to add = True [LOG 02:33:38.926] [WeldingTool] | Module ready to add = True [LOG 02:33:38.926] [WeldingTool] | Module ready to add = True [LOG 02:33:38.926] [WeldingTool] | Module ready to add = True [LOG 02:33:38.926] [WeldingTool] | Module ready to add = True [LOG 02:33:38.926] [WeldingTool] | Module ready to add = True [LOG 02:33:38.926] [WeldingTool] | Module ready to add = True [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment Module already exists!!! [LOG 02:33:38.926] [WeldingTool] | BreakingAttributes found = 1 [LOG 02:33:38.926] [WeldingTool] | BreakingAttributes found | current one is experimentID | ExistingValue = KPBS_plantgrowthstudy - NewValue = KPBS_plantgrowthstudy [LOG 02:33:38.926] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - name is string [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - name is merged with value ModuleScienceExperiment [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - experimentID is string [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - experimentID is merged with value KPBS_plantgrowthstudy [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - experimentActionName is string [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - experimentActionName is merged with value Make plant growth study [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - resetActionName is string [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - resetActionName is merged with value Discard Plant Samples [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - reviewActionName is string [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - reviewActionName is merged with value Review Plant Samples [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - useStaging is bool [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - useStaging is merged with value False [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - useActionGroups is bool [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - useActionGroups is merged with value True [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - hideUIwhenUnavailable is bool [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - hideUIwhenUnavailable is merged with value True [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - xmitDataScalar is float [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - newValue - xmitDataScalar = 0.4 [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - existingValue - xmitDataScalar = 0.4 [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - xmitDataScalar - averaged [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - xmitDataScalar is merged with value 0.4 [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - FxModules is float [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - newValue - FxModules = 0 [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - existingValue - FxModules = 0 [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - FxModules - added [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - FxModules is merged with value 0 [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - dataIsCollectable is bool [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - dataIsCollectable is merged with value True [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - collectActionName is string [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - collectActionName is merged with value Collect Plant Samples [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - interactionRange is float [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - newValue - interactionRange = 1.2 [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - existingValue - interactionRange = 1.2 [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - interactionRange - averaged [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - interactionRange is merged with value 1.2 [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - usageReqMaskInternal is float [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - newValue - usageReqMaskInternal = 1 [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - existingValue - usageReqMaskInternal = 1 [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - usageReqMaskInternal - added [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - usageReqMaskInternal is merged with value 2 [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - usageReqMaskExternal is float [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - newValue - usageReqMaskExternal = 8 [LOG 02:33:38.926] [WeldingTool] | ModuleScienceExperiment - existingValue - usageReqMaskExternal = 8 [LOG 02:33:38.927] [WeldingTool] | ModuleScienceExperiment - usageReqMaskExternal - added [LOG 02:33:38.927] [WeldingTool] | ModuleScienceExperiment - usageReqMaskExternal is merged with value 16 [LOG 02:33:38.927] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.927] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.927] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.927] [WeldingTool] Values done [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | ModuleScienceContainer Module already exists!!! [LOG 02:33:38.927] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.927] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.927] [WeldingTool] | ModuleScienceContainer - name is string [LOG 02:33:38.927] [WeldingTool] | ModuleScienceContainer - name is merged with value ModuleScienceContainer [LOG 02:33:38.927] [WeldingTool] | ModuleScienceContainer - reviewActionName is string [LOG 02:33:38.927] [WeldingTool] | ModuleScienceContainer - reviewActionName is merged with value Review Stored Data [LOG 02:33:38.927] [WeldingTool] | ModuleScienceContainer - storeActionName is string [LOG 02:33:38.927] [WeldingTool] | ModuleScienceContainer - storeActionName is merged with value Store Experiments [LOG 02:33:38.927] [WeldingTool] | ModuleScienceContainer - evaOnlyStorage is bool [LOG 02:33:38.927] [WeldingTool] | ModuleScienceContainer - evaOnlyStorage is merged with value True [LOG 02:33:38.927] [WeldingTool] | ModuleScienceContainer - storageRange is float [LOG 02:33:38.927] [WeldingTool] | ModuleScienceContainer - newValue - storageRange = 2 [LOG 02:33:38.927] [WeldingTool] | ModuleScienceContainer - existingValue - storageRange = 2 [LOG 02:33:38.927] [WeldingTool] | ModuleScienceContainer - storageRange - averaged [LOG 02:33:38.927] [WeldingTool] | ModuleScienceContainer - storageRange is merged with value 2 [LOG 02:33:38.927] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.927] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.927] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.927] [WeldingTool] Values done [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | AYA_Science Module already exists!!! [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.927] [WeldingTool] | Module ready to add = True [LOG 02:33:38.928] [WeldingTool] | Module ready to add = True [LOG 02:33:38.928] [WeldingTool] | Module ready to add = True [LOG 02:33:38.928] [WeldingTool] | ModuleKPBSConverter Module already exists!!! [LOG 02:33:38.928] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.928] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.928] [WeldingTool] | ModuleKPBSConverter - name is string [LOG 02:33:38.928] [WeldingTool] | ModuleKPBSConverter - name is merged with value ModuleKPBSConverter [LOG 02:33:38.928] [WeldingTool] | ModuleKPBSConverter - ConverterName is string [LOG 02:33:38.928] [WeldingTool] | ModuleKPBSConverter - ConverterName is merged with value Greenhouse [LOG 02:33:38.928] [WeldingTool] | ModuleKPBSConverter - tag is string [LOG 02:33:38.928] [WeldingTool] | ModuleKPBSConverter - tag is merged with value Greenhouse [LOG 02:33:38.928] [WeldingTool] | ModuleKPBSConverter - StartActionName is string [LOG 02:33:38.928] [WeldingTool] | ModuleKPBSConverter - StartActionName is merged with value Start Greenhouse [LOG 02:33:38.928] [WeldingTool] | ModuleKPBSConverter - StopActionName is string [LOG 02:33:38.928] [WeldingTool] | ModuleKPBSConverter - StopActionName is merged with value Stop Greenhouse [LOG 02:33:38.928] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.928] [WeldingTool] | SubModule BreakingAttributes found = 1 [LOG 02:33:38.928] [WeldingTool] | SubModule BreakingAttributes found | current one is ResourceName | ExistingValue = Supplies - NewValue = Supplies [LOG 02:33:38.928] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.928] [WeldingTool] | Supplies - ResourceName is string [LOG 02:33:38.928] [WeldingTool] | Supplies - ResourceName is merged with value Supplies [LOG 02:33:38.928] [WeldingTool] | Supplies - Ratio is float [LOG 02:33:38.928] [WeldingTool] | Supplies - newValue - Ratio = 0.001275 [LOG 02:33:38.928] [WeldingTool] | Supplies - existingValue - Ratio = 0.001275 [LOG 02:33:38.928] [WeldingTool] | Supplies - Ratio - added [LOG 02:33:38.928] [WeldingTool] | Supplies - Ratio is merged with value 0.00255 [LOG 02:33:38.928] [WeldingTool] | Supplies - DumpExcess is bool [LOG 02:33:38.928] [WeldingTool] | Supplies - DumpExcess is merged with value False [LOG 02:33:38.928] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.928] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.928] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.928] [WeldingTool] Values done [LOG 02:33:38.928] [WeldingTool] | SubModule BreakingAttributes found = 1 [LOG 02:33:38.928] [WeldingTool] | SubModule BreakingAttributes found | current one is ResourceName | ExistingValue = Mulch - NewValue = Mulch [LOG 02:33:38.928] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.928] [WeldingTool] | Mulch - ResourceName is string [LOG 02:33:38.928] [WeldingTool] | Mulch - ResourceName is merged with value Mulch [LOG 02:33:38.928] [WeldingTool] | Mulch - Ratio is float [LOG 02:33:38.928] [WeldingTool] | Mulch - newValue - Ratio = 0.001125 [LOG 02:33:38.928] [WeldingTool] | Mulch - existingValue - Ratio = 0.001125 [LOG 02:33:38.928] [WeldingTool] | Mulch - Ratio - added [LOG 02:33:38.928] [WeldingTool] | Mulch - Ratio is merged with value 0.00225 [LOG 02:33:38.928] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.928] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.928] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.928] [WeldingTool] Values done [LOG 02:33:38.928] [WeldingTool] | SubModule BreakingAttributes found = 1 [LOG 02:33:38.928] [WeldingTool] | SubModule BreakingAttributes found | current one is ResourceName | ExistingValue = Mulch - NewValue = Fertilizer [LOG 02:33:38.928] [WeldingTool] | SubModule BreakingAttributes found = 1 [LOG 02:33:38.928] [WeldingTool] | SubModule BreakingAttributes found | current one is ResourceName | ExistingValue = Fertilizer - NewValue = Fertilizer [LOG 02:33:38.928] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.928] [WeldingTool] | Fertilizer - ResourceName is string [LOG 02:33:38.928] [WeldingTool] | Fertilizer - ResourceName is merged with value Fertilizer [LOG 02:33:38.928] [WeldingTool] | Fertilizer - Ratio is float [LOG 02:33:38.928] [WeldingTool] | Fertilizer - newValue - Ratio = 0.00015 [LOG 02:33:38.928] [WeldingTool] | Fertilizer - existingValue - Ratio = 0.00015 [LOG 02:33:38.928] [WeldingTool] | Fertilizer - Ratio - added [LOG 02:33:38.928] [WeldingTool] | Fertilizer - Ratio is merged with value 0.0003 [LOG 02:33:38.928] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.928] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.928] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.928] [WeldingTool] Values done [LOG 02:33:38.928] [WeldingTool] | SubModule BreakingAttributes found = 1 [LOG 02:33:38.928] [WeldingTool] | SubModule BreakingAttributes found | current one is ResourceName | ExistingValue = Mulch - NewValue = ElectricCharge [LOG 02:33:38.928] [WeldingTool] | SubModule BreakingAttributes found = 1 [LOG 02:33:38.928] [WeldingTool] | SubModule BreakingAttributes found | current one is ResourceName | ExistingValue = Fertilizer - NewValue = ElectricCharge [LOG 02:33:38.928] [WeldingTool] | SubModule BreakingAttributes found = 1 [LOG 02:33:38.928] [WeldingTool] | SubModule BreakingAttributes found | current one is ResourceName | ExistingValue = ElectricCharge - NewValue = ElectricCharge [LOG 02:33:38.928] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.928] [WeldingTool] | ElectricCharge - ResourceName is string [LOG 02:33:38.928] [WeldingTool] | ElectricCharge - ResourceName is merged with value ElectricCharge [LOG 02:33:38.928] [WeldingTool] | ElectricCharge - Ratio is float [LOG 02:33:38.928] [WeldingTool] | ElectricCharge - newValue - Ratio = 5 [LOG 02:33:38.928] [WeldingTool] | ElectricCharge - existingValue - Ratio = 5 [LOG 02:33:38.928] [WeldingTool] | ElectricCharge - Ratio - added [LOG 02:33:38.928] [WeldingTool] | ElectricCharge - Ratio is merged with value 10 [LOG 02:33:38.928] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.928] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.928] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.928] [WeldingTool] Values done [LOG 02:33:38.928] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.928] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.928] [WeldingTool] Values done [LOG 02:33:38.928] [WeldingTool] | Module ready to add = True [LOG 02:33:38.928] [WeldingTool] | Module ready to add = True [LOG 02:33:38.928] [WeldingTool] | Module ready to add = True [LOG 02:33:38.928] [WeldingTool] | Module ready to add = True [LOG 02:33:38.928] [WeldingTool] | Module ready to add = True [LOG 02:33:38.928] [WeldingTool] | Module ready to add = True [LOG 02:33:38.928] [WeldingTool] | Module ready to add = True [LOG 02:33:38.928] [WeldingTool] | Module ready to add = True [LOG 02:33:38.928] [WeldingTool] | ModuleResourceActions2 Module already exists!!! [LOG 02:33:38.928] [WeldingTool] | Module ready to add = True [LOG 02:33:38.928] [WeldingTool] | Module ready to add = True [LOG 02:33:38.928] [WeldingTool] | Module ready to add = True [LOG 02:33:38.928] [WeldingTool] | Module ready to add = True [LOG 02:33:38.928] [WeldingTool] | Module ready to add = True [LOG 02:33:38.928] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.928] [WeldingTool] ..Config KKAOSS_LS_container_greenhouse has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.928] [WeldingTool] ..Config KKAOSS_LS_container_greenhouse has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.929] [WeldingTool] ..Config KKAOSS_LS_container_greenhouse has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.929] [WeldingTool] ..Config KKAOSS_LS_container_greenhouse has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.929] [WeldingTool] .Part KKAOSS.LS.container.greenhouse has 1 Stack attach node(s) [LOG 02:33:38.929] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.929] [WeldingTool] New Center of Mass: (0.0, 8.5, 0.2) [LOG 02:33:38.929] [WeldingTool] Part crashTolerance: 15 - Global crashTolerance: 37.7322 - method: WeightedAverage [LOG 02:33:38.929] [WeldingTool] Part crashTolerance: 22 - Global crashTolerance: 430.6176 - method: WeightedAverage [LOG 02:33:38.929] [WeldingTool] Part breakingTorque: 22 - Global breakingTorque: 425.3725 - method: WeightedAverage [LOG 02:33:38.929] [WeldingTool] Part maxTemp: 2000 - Global maxTemp: 2361.535 - method: WeightedAverage [LOG 02:33:38.929] [WeldingTool] Welding this part: KKAOSS.LS.container.USILS.noms.big [LOG 02:33:38.929] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.929] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.929] [WeldingTool] KKAOSS.LS.container.USILS.noms.big Attache mode STACK Attach method FIXED_JOINT [LOG 02:33:38.931] [WeldingTool] .Found 1 config files [LOG 02:33:38.931] [WeldingTool] ..Config KKAOSS_LS_container_USILS_noms_big has 1 MODEL node [LOG 02:33:38.931] [WeldingTool] ..MODEL url: PlanetaryBaseInc/ModSupport/Parts/LifeSupport/Container_Noms_big [LOG 02:33:38.931] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.931] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.931] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.931] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.931] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.931] [WeldingTool] ..Childs count 1 [LOG 02:33:38.931] [WeldingTool] scaling info: rescaleFactor=1| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.931] [WeldingTool] ..newpart position (1.700, 5.125, -0.400) [LOG 02:33:38.931] [WeldingTool] ..newpart rotation (0.000, 0.707, 0.000, -0.707) [LOG 02:33:38.932] [WeldingTool] ..newpart rotation.eulerAngles (0.000, 270.000, 0.000) [LOG 02:33:38.932] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 270.000, 90.000) [LOG 02:33:38.932] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.932] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.932] [WeldingTool] ..position (1.700, 5.125, -0.400) [LOG 02:33:38.932] [WeldingTool] ..rotation (0.000, 270.000, 0.000) [LOG 02:33:38.932] [WeldingTool] ..scale (1.000, 1.000, 1.000) [LOG 02:33:38.932] [WeldingTool] ..Part Part has 1 RESOURCE node [LOG 02:33:38.932] [WeldingTool] ..RESOURCE add: Supplies 2000/2000 [LOG 02:33:38.932] [WeldingTool] ..Config KKAOSS_LS_container_USILS_noms_big has 5 MODULE node [LOG 02:33:38.932] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.932] [WeldingTool] | Module ready to add = True [LOG 02:33:38.932] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.932] [WeldingTool] | Module ready to add = True [LOG 02:33:38.932] [WeldingTool] | Module ready to add = True [LOG 02:33:38.932] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.932] [WeldingTool] | Module ready to add = True [LOG 02:33:38.932] [WeldingTool] | Module ready to add = True [LOG 02:33:38.932] [WeldingTool] | Module ready to add = True [LOG 02:33:38.932] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.932] [WeldingTool] | Module ready to add = True [LOG 02:33:38.932] [WeldingTool] | Module ready to add = True [LOG 02:33:38.932] [WeldingTool] | Module ready to add = True [LOG 02:33:38.932] [WeldingTool] | Module ready to add = True [LOG 02:33:38.932] [WeldingTool] | Module ready to add = True [LOG 02:33:38.932] [WeldingTool] | Module ready to add = True [LOG 02:33:38.932] [WeldingTool] | Module ready to add = True [LOG 02:33:38.932] [WeldingTool] | Module ready to add = True [LOG 02:33:38.932] [WeldingTool] | ModuleResourceActions2 Module already exists!!! [LOG 02:33:38.932] [WeldingTool] | Module ready to add = True [LOG 02:33:38.932] [WeldingTool] | Module ready to add = True [LOG 02:33:38.932] [WeldingTool] | Module ready to add = True [LOG 02:33:38.932] [WeldingTool] | Module ready to add = True [LOG 02:33:38.932] [WeldingTool] | Module ready to add = True [LOG 02:33:38.932] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.932] [WeldingTool] ..Config KKAOSS_LS_container_USILS_noms_big has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.932] [WeldingTool] ..Config KKAOSS_LS_container_USILS_noms_big has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.932] [WeldingTool] ..Config KKAOSS_LS_container_USILS_noms_big has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.932] [WeldingTool] ..Config KKAOSS_LS_container_USILS_noms_big has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.932] [WeldingTool] .Part KKAOSS.LS.container.USILS.noms.big has 1 Stack attach node(s) [LOG 02:33:38.932] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.932] [WeldingTool] New Center of Mass: (0.0, 8.5, 0.2) [LOG 02:33:38.932] [WeldingTool] Part crashTolerance: 15 - Global crashTolerance: 37.62745 - method: WeightedAverage [LOG 02:33:38.932] [WeldingTool] Part crashTolerance: 22 - Global crashTolerance: 428.7347 - method: WeightedAverage [LOG 02:33:38.932] [WeldingTool] Part breakingTorque: 22 - Global breakingTorque: 423.5137 - method: WeightedAverage [LOG 02:33:38.932] [WeldingTool] Part maxTemp: 2000 - Global maxTemp: 2359.869 - method: WeightedAverage [LOG 02:33:38.932] [WeldingTool] Welding this part: KKAOSS.Storage.mid.g [LOG 02:33:38.932] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.932] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.932] [WeldingTool] KKAOSS.Storage.mid.g Attache mode SRF_ATTACH Attach method FIXED_JOINT [LOG 02:33:38.935] [WeldingTool] .Found 1 config files [LOG 02:33:38.935] [WeldingTool] ..Config KKAOSS_Storage_mid_g has 1 MODEL node [LOG 02:33:38.935] [WeldingTool] ..MODEL url: PlanetaryBaseInc/ContainerSystem/Storage_mid_g [LOG 02:33:38.935] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.935] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.935] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.935] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.935] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.935] [WeldingTool] ..Childs count 4 [LOG 02:33:38.935] [WeldingTool] scaling info: rescaleFactor=1| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.935] [WeldingTool] ..newpart position (-1.300, 4.525, 0.600) [LOG 02:33:38.935] [WeldingTool] ..newpart rotation (0.707, 0.000, 0.000, 0.707) [LOG 02:33:38.935] [WeldingTool] ..newpart rotation.eulerAngles (90.000, 0.000, 0.000) [LOG 02:33:38.935] [WeldingTool] ..newpart rotation.localEulerAngles (90.000, 0.000, 0.000) [LOG 02:33:38.935] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.935] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.935] [WeldingTool] ..position (-1.300, 4.525, 0.600) [LOG 02:33:38.935] [WeldingTool] ..rotation (90.000, 0.000, 0.000) [LOG 02:33:38.935] [WeldingTool] ..scale (1.000, 1.000, 1.000) [LOG 02:33:38.935] [WeldingTool] ..Part Part has 0 RESOURCE node [LOG 02:33:38.935] [WeldingTool] ..Config KKAOSS_Storage_mid_g has 4 MODULE node [LOG 02:33:38.935] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.935] [WeldingTool] | Module ready to add = True [LOG 02:33:38.935] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.935] [WeldingTool] | Module ready to add = True [LOG 02:33:38.935] [WeldingTool] | Module ready to add = True [LOG 02:33:38.935] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.935] [WeldingTool] | Module ready to add = True [LOG 02:33:38.935] [WeldingTool] | Module ready to add = True [LOG 02:33:38.935] [WeldingTool] | Module ready to add = True [LOG 02:33:38.935] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.935] [WeldingTool] | Module ready to add = True [LOG 02:33:38.935] [WeldingTool] | Module ready to add = True [LOG 02:33:38.935] [WeldingTool] | Module ready to add = True [LOG 02:33:38.935] [WeldingTool] | Module ready to add = True [LOG 02:33:38.935] [WeldingTool] | Module ready to add = True [LOG 02:33:38.935] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.935] [WeldingTool] ..Config KKAOSS_Storage_mid_g has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.935] [WeldingTool] ..Config KKAOSS_Storage_mid_g has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.935] [WeldingTool] ..Config KKAOSS_Storage_mid_g has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.935] [WeldingTool] ..Config KKAOSS_Storage_mid_g has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.935] [WeldingTool] .Part KKAOSS.Storage.mid.g has 8 Stack attach node(s) [LOG 02:33:38.935] [WeldingTool] ..set relative position =(-1.300, 4.525, 0.600) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.935] [WeldingTool] .Stack Node Add: topKKAOSS.Storage.mid.g39 [LOG 02:33:38.935] [WeldingTool] ..set relative position =(-1.300, 4.525, 0.600) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.935] [WeldingTool] .Stack Node Add: frontKKAOSS.Storage.mid.g39 [LOG 02:33:38.935] [WeldingTool] ..set relative position =(-1.300, 4.525, 0.600) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.935] [WeldingTool] .Stack Node Add: backKKAOSS.Storage.mid.g39 [LOG 02:33:38.935] [WeldingTool] ..set relative position =(-1.300, 4.525, 0.600) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.935] [WeldingTool] .Stack Node Add: left2KKAOSS.Storage.mid.g39 [LOG 02:33:38.935] [WeldingTool] ..set relative position =(-1.300, 4.525, 0.600) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.935] [WeldingTool] .Stack Node Add: right1KKAOSS.Storage.mid.g39 [LOG 02:33:38.935] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.935] [WeldingTool] New Center of Mass: (0.0, 8.5, 0.2) [LOG 02:33:38.935] [WeldingTool] Part crashTolerance: 15 - Global crashTolerance: 37.49786 - method: WeightedAverage [LOG 02:33:38.935] [WeldingTool] Part crashTolerance: 22 - Global crashTolerance: 426.4053 - method: WeightedAverage [LOG 02:33:38.935] [WeldingTool] Part breakingTorque: 22 - Global breakingTorque: 421.2142 - method: WeightedAverage [LOG 02:33:38.935] [WeldingTool] Part maxTemp: 2100 - Global maxTemp: 2358.38 - method: WeightedAverage [LOG 02:33:38.935] [WeldingTool] Welding this part: KKAOSS.LS.container.greenhouse [LOG 02:33:38.935] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.935] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.935] [WeldingTool] KKAOSS.LS.container.greenhouse Attache mode STACK Attach method FIXED_JOINT [LOG 02:33:38.938] [WeldingTool] .Found 1 config files [LOG 02:33:38.938] [WeldingTool] ..Config KKAOSS_LS_container_greenhouse has 1 MODEL node [LOG 02:33:38.938] [WeldingTool] ..MODEL url: PlanetaryBaseInc/ModSupport/Parts/LifeSupport/Container_Greenhouse [LOG 02:33:38.938] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.938] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.938] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.938] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.938] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.938] [WeldingTool] ..Childs count 1 [LOG 02:33:38.938] [WeldingTool] scaling info: rescaleFactor=1| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.938] [WeldingTool] ..newpart position (-1.427, 4.644, 1.050) [LOG 02:33:38.938] [WeldingTool] ..newpart rotation (0.707, 0.000, 0.000, 0.707) [LOG 02:33:38.938] [WeldingTool] ..newpart rotation.eulerAngles (90.000, 0.000, 0.000) [LOG 02:33:38.938] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.938] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.938] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.938] [WeldingTool] ..position (-1.427, 4.644, 1.050) [LOG 02:33:38.938] [WeldingTool] ..rotation (90.000, 0.000, 0.000) [LOG 02:33:38.938] [WeldingTool] ..scale (1.000, 1.000, 1.000) [LOG 02:33:38.938] [WeldingTool] ..Part Part has 3 RESOURCE node [LOG 02:33:38.938] [WeldingTool] ..RESOURCE add: Mulch 0/100 [LOG 02:33:38.938] [WeldingTool] ..RESOURCE add: Supplies 100/100 [LOG 02:33:38.938] [WeldingTool] ..RESOURCE add: Fertilizer 100/100 [LOG 02:33:38.938] [WeldingTool] ..Config KKAOSS_LS_container_greenhouse has 9 MODULE node [LOG 02:33:38.938] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.938] [WeldingTool] | Module ready to add = True [LOG 02:33:38.938] [WeldingTool] | Module ready to add = True [LOG 02:33:38.938] [WeldingTool] | Module ready to add = True [LOG 02:33:38.938] [WeldingTool] | Module ready to add = True [LOG 02:33:38.938] [WeldingTool] | Module ready to add = True [LOG 02:33:38.938] [WeldingTool] | Module ready to add = True [LOG 02:33:38.938] [WeldingTool] | Module ready to add = True [LOG 02:33:38.938] [WeldingTool] | Module ready to add = True [LOG 02:33:38.938] [WeldingTool] | Module ready to add = True [LOG 02:33:38.938] [WeldingTool] | Module ready to add = True [LOG 02:33:38.938] [WeldingTool] | Module ready to add = True [LOG 02:33:38.938] [WeldingTool] | Module ready to add = True [LOG 02:33:38.938] [WeldingTool] | Module ready to add = True [LOG 02:33:38.938] [WeldingTool] | Module ready to add = True [LOG 02:33:38.938] [WeldingTool] | Module ready to add = True [LOG 02:33:38.938] [WeldingTool] | Module ready to add = True [LOG 02:33:38.938] [WeldingTool] | Module ready to add = True [LOG 02:33:38.938] [WeldingTool] | Module ready to add = True [LOG 02:33:38.938] [WeldingTool] | Module ready to add = True [LOG 02:33:38.938] [WeldingTool] | Module ready to add = True [LOG 02:33:38.938] [WeldingTool] | ModuleScienceExperiment Module already exists!!! [LOG 02:33:38.939] [WeldingTool] | BreakingAttributes found = 1 [LOG 02:33:38.939] [WeldingTool] | BreakingAttributes found | current one is experimentID | ExistingValue = KPBS_plantgrowthstudy - NewValue = KPBS_plantgrowthstudy [LOG 02:33:38.939] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - name is string [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - name is merged with value ModuleScienceExperiment [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - experimentID is string [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - experimentID is merged with value KPBS_plantgrowthstudy [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - experimentActionName is string [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - experimentActionName is merged with value Make plant growth study [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - resetActionName is string [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - resetActionName is merged with value Discard Plant Samples [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - reviewActionName is string [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - reviewActionName is merged with value Review Plant Samples [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - useStaging is bool [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - useStaging is merged with value False [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - useActionGroups is bool [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - useActionGroups is merged with value True [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - hideUIwhenUnavailable is bool [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - hideUIwhenUnavailable is merged with value True [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - xmitDataScalar is float [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - newValue - xmitDataScalar = 0.4 [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - existingValue - xmitDataScalar = 0.4 [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - xmitDataScalar - averaged [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - xmitDataScalar is merged with value 0.4 [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - FxModules is float [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - newValue - FxModules = 0 [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - existingValue - FxModules = 0 [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - FxModules - added [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - FxModules is merged with value 0 [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - dataIsCollectable is bool [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - dataIsCollectable is merged with value True [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - collectActionName is string [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - collectActionName is merged with value Collect Plant Samples [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - interactionRange is float [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - newValue - interactionRange = 1.2 [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - existingValue - interactionRange = 1.2 [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - interactionRange - averaged [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - interactionRange is merged with value 1.2 [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - usageReqMaskInternal is float [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - newValue - usageReqMaskInternal = 1 [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - existingValue - usageReqMaskInternal = 2 [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - usageReqMaskInternal - added [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - usageReqMaskInternal is merged with value 3 [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - usageReqMaskExternal is float [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - newValue - usageReqMaskExternal = 8 [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - existingValue - usageReqMaskExternal = 16 [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - usageReqMaskExternal - added [LOG 02:33:38.939] [WeldingTool] | ModuleScienceExperiment - usageReqMaskExternal is merged with value 24 [LOG 02:33:38.939] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.939] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.939] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.939] [WeldingTool] Values done [LOG 02:33:38.939] [WeldingTool] | Module ready to add = True [LOG 02:33:38.939] [WeldingTool] | Module ready to add = True [LOG 02:33:38.939] [WeldingTool] | Module ready to add = True [LOG 02:33:38.939] [WeldingTool] | Module ready to add = True [LOG 02:33:38.939] [WeldingTool] | Module ready to add = True [LOG 02:33:38.939] [WeldingTool] | Module ready to add = True [LOG 02:33:38.939] [WeldingTool] | Module ready to add = True [LOG 02:33:38.939] [WeldingTool] | Module ready to add = True [LOG 02:33:38.939] [WeldingTool] | Module ready to add = True [LOG 02:33:38.939] [WeldingTool] | Module ready to add = True [LOG 02:33:38.939] [WeldingTool] | Module ready to add = True [LOG 02:33:38.939] [WeldingTool] | Module ready to add = True [LOG 02:33:38.939] [WeldingTool] | Module ready to add = True [LOG 02:33:38.939] [WeldingTool] | Module ready to add = True [LOG 02:33:38.939] [WeldingTool] | Module ready to add = True [LOG 02:33:38.939] [WeldingTool] | Module ready to add = True [LOG 02:33:38.939] [WeldingTool] | Module ready to add = True [LOG 02:33:38.939] [WeldingTool] | Module ready to add = True [LOG 02:33:38.939] [WeldingTool] | Module ready to add = True [LOG 02:33:38.939] [WeldingTool] | Module ready to add = True [LOG 02:33:38.939] [WeldingTool] | Module ready to add = True [LOG 02:33:38.939] [WeldingTool] | ModuleScienceContainer Module already exists!!! [LOG 02:33:38.939] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.939] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.939] [WeldingTool] | ModuleScienceContainer - name is string [LOG 02:33:38.939] [WeldingTool] | ModuleScienceContainer - name is merged with value ModuleScienceContainer [LOG 02:33:38.939] [WeldingTool] | ModuleScienceContainer - reviewActionName is string [LOG 02:33:38.939] [WeldingTool] | ModuleScienceContainer - reviewActionName is merged with value Review Stored Data [LOG 02:33:38.939] [WeldingTool] | ModuleScienceContainer - storeActionName is string [LOG 02:33:38.939] [WeldingTool] | ModuleScienceContainer - storeActionName is merged with value Store Experiments [LOG 02:33:38.939] [WeldingTool] | ModuleScienceContainer - evaOnlyStorage is bool [LOG 02:33:38.939] [WeldingTool] | ModuleScienceContainer - evaOnlyStorage is merged with value True [LOG 02:33:38.939] [WeldingTool] | ModuleScienceContainer - storageRange is float [LOG 02:33:38.939] [WeldingTool] | ModuleScienceContainer - newValue - storageRange = 2 [LOG 02:33:38.939] [WeldingTool] | ModuleScienceContainer - existingValue - storageRange = 2 [LOG 02:33:38.939] [WeldingTool] | ModuleScienceContainer - storageRange - averaged [LOG 02:33:38.939] [WeldingTool] | ModuleScienceContainer - storageRange is merged with value 2 [LOG 02:33:38.939] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.939] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.939] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.939] [WeldingTool] Values done [LOG 02:33:38.939] [WeldingTool] | Module ready to add = True [LOG 02:33:38.939] [WeldingTool] | Module ready to add = True [LOG 02:33:38.939] [WeldingTool] | Module ready to add = True [LOG 02:33:38.939] [WeldingTool] | Module ready to add = True [LOG 02:33:38.939] [WeldingTool] | Module ready to add = True [LOG 02:33:38.939] [WeldingTool] | Module ready to add = True [LOG 02:33:38.939] [WeldingTool] | Module ready to add = True [LOG 02:33:38.939] [WeldingTool] | Module ready to add = True [LOG 02:33:38.939] [WeldingTool] | Module ready to add = True [LOG 02:33:38.939] [WeldingTool] | Module ready to add = True [LOG 02:33:38.939] [WeldingTool] | Module ready to add = True [LOG 02:33:38.939] [WeldingTool] | Module ready to add = True [LOG 02:33:38.939] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | AYA_Science Module already exists!!! [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | Module ready to add = True [LOG 02:33:38.940] [WeldingTool] | ModuleKPBSConverter Module already exists!!! [LOG 02:33:38.940] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.940] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.940] [WeldingTool] | ModuleKPBSConverter - name is string [LOG 02:33:38.940] [WeldingTool] | ModuleKPBSConverter - name is merged with value ModuleKPBSConverter [LOG 02:33:38.940] [WeldingTool] | ModuleKPBSConverter - ConverterName is string [LOG 02:33:38.940] [WeldingTool] | ModuleKPBSConverter - ConverterName is merged with value Greenhouse [LOG 02:33:38.940] [WeldingTool] | ModuleKPBSConverter - tag is string [LOG 02:33:38.940] [WeldingTool] | ModuleKPBSConverter - tag is merged with value Greenhouse [LOG 02:33:38.940] [WeldingTool] | ModuleKPBSConverter - StartActionName is string [LOG 02:33:38.940] [WeldingTool] | ModuleKPBSConverter - StartActionName is merged with value Start Greenhouse [LOG 02:33:38.940] [WeldingTool] | ModuleKPBSConverter - StopActionName is string [LOG 02:33:38.940] [WeldingTool] | ModuleKPBSConverter - StopActionName is merged with value Stop Greenhouse [LOG 02:33:38.940] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.940] [WeldingTool] | SubModule BreakingAttributes found = 1 [LOG 02:33:38.940] [WeldingTool] | SubModule BreakingAttributes found | current one is ResourceName | ExistingValue = Supplies - NewValue = Supplies [LOG 02:33:38.940] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.940] [WeldingTool] | Supplies - ResourceName is string [LOG 02:33:38.940] [WeldingTool] | Supplies - ResourceName is merged with value Supplies [LOG 02:33:38.940] [WeldingTool] | Supplies - Ratio is float [LOG 02:33:38.940] [WeldingTool] | Supplies - newValue - Ratio = 0.001275 [LOG 02:33:38.940] [WeldingTool] | Supplies - existingValue - Ratio = 0.00255 [LOG 02:33:38.940] [WeldingTool] | Supplies - Ratio - added [LOG 02:33:38.940] [WeldingTool] | Supplies - Ratio is merged with value 0.003825 [LOG 02:33:38.940] [WeldingTool] | Supplies - DumpExcess is bool [LOG 02:33:38.940] [WeldingTool] | Supplies - DumpExcess is merged with value False [LOG 02:33:38.940] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.940] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.940] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.940] [WeldingTool] Values done [LOG 02:33:38.940] [WeldingTool] | SubModule BreakingAttributes found = 1 [LOG 02:33:38.940] [WeldingTool] | SubModule BreakingAttributes found | current one is ResourceName | ExistingValue = Mulch - NewValue = Mulch [LOG 02:33:38.940] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.940] [WeldingTool] | Mulch - ResourceName is string [LOG 02:33:38.940] [WeldingTool] | Mulch - ResourceName is merged with value Mulch [LOG 02:33:38.940] [WeldingTool] | Mulch - Ratio is float [LOG 02:33:38.940] [WeldingTool] | Mulch - newValue - Ratio = 0.001125 [LOG 02:33:38.940] [WeldingTool] | Mulch - existingValue - Ratio = 0.00225 [LOG 02:33:38.940] [WeldingTool] | Mulch - Ratio - added [LOG 02:33:38.940] [WeldingTool] | Mulch - Ratio is merged with value 0.003375 [LOG 02:33:38.940] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.940] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.940] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.940] [WeldingTool] Values done [LOG 02:33:38.940] [WeldingTool] | SubModule BreakingAttributes found = 1 [LOG 02:33:38.940] [WeldingTool] | SubModule BreakingAttributes found | current one is ResourceName | ExistingValue = Mulch - NewValue = Fertilizer [LOG 02:33:38.940] [WeldingTool] | SubModule BreakingAttributes found = 1 [LOG 02:33:38.940] [WeldingTool] | SubModule BreakingAttributes found | current one is ResourceName | ExistingValue = Fertilizer - NewValue = Fertilizer [LOG 02:33:38.940] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.940] [WeldingTool] | Fertilizer - ResourceName is string [LOG 02:33:38.940] [WeldingTool] | Fertilizer - ResourceName is merged with value Fertilizer [LOG 02:33:38.940] [WeldingTool] | Fertilizer - Ratio is float [LOG 02:33:38.940] [WeldingTool] | Fertilizer - newValue - Ratio = 0.00015 [LOG 02:33:38.940] [WeldingTool] | Fertilizer - existingValue - Ratio = 0.0003 [LOG 02:33:38.940] [WeldingTool] | Fertilizer - Ratio - added [LOG 02:33:38.940] [WeldingTool] | Fertilizer - Ratio is merged with value 0.00045 [LOG 02:33:38.940] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.940] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.940] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.940] [WeldingTool] Values done [LOG 02:33:38.940] [WeldingTool] | SubModule BreakingAttributes found = 1 [LOG 02:33:38.940] [WeldingTool] | SubModule BreakingAttributes found | current one is ResourceName | ExistingValue = Mulch - NewValue = ElectricCharge [LOG 02:33:38.940] [WeldingTool] | SubModule BreakingAttributes found = 1 [LOG 02:33:38.940] [WeldingTool] | SubModule BreakingAttributes found | current one is ResourceName | ExistingValue = Fertilizer - NewValue = ElectricCharge [LOG 02:33:38.940] [WeldingTool] | SubModule BreakingAttributes found = 1 [LOG 02:33:38.940] [WeldingTool] | SubModule BreakingAttributes found | current one is ResourceName | ExistingValue = ElectricCharge - NewValue = ElectricCharge [LOG 02:33:38.940] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.940] [WeldingTool] | ElectricCharge - ResourceName is string [LOG 02:33:38.940] [WeldingTool] | ElectricCharge - ResourceName is merged with value ElectricCharge [LOG 02:33:38.941] [WeldingTool] | ElectricCharge - Ratio is float [LOG 02:33:38.941] [WeldingTool] | ElectricCharge - newValue - Ratio = 5 [LOG 02:33:38.941] [WeldingTool] | ElectricCharge - existingValue - Ratio = 10 [LOG 02:33:38.941] [WeldingTool] | ElectricCharge - Ratio - added [LOG 02:33:38.941] [WeldingTool] | ElectricCharge - Ratio is merged with value 15 [LOG 02:33:38.941] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.941] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.941] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.941] [WeldingTool] Values done [LOG 02:33:38.941] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.941] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.941] [WeldingTool] Values done [LOG 02:33:38.941] [WeldingTool] | Module ready to add = True [LOG 02:33:38.941] [WeldingTool] | Module ready to add = True [LOG 02:33:38.941] [WeldingTool] | Module ready to add = True [LOG 02:33:38.941] [WeldingTool] | Module ready to add = True [LOG 02:33:38.941] [WeldingTool] | Module ready to add = True [LOG 02:33:38.941] [WeldingTool] | Module ready to add = True [LOG 02:33:38.941] [WeldingTool] | Module ready to add = True [LOG 02:33:38.941] [WeldingTool] | Module ready to add = True [LOG 02:33:38.941] [WeldingTool] | ModuleResourceActions2 Module already exists!!! [LOG 02:33:38.941] [WeldingTool] | Module ready to add = True [LOG 02:33:38.941] [WeldingTool] | Module ready to add = True [LOG 02:33:38.941] [WeldingTool] | Module ready to add = True [LOG 02:33:38.941] [WeldingTool] | Module ready to add = True [LOG 02:33:38.941] [WeldingTool] | Module ready to add = True [LOG 02:33:38.941] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.941] [WeldingTool] ..Config KKAOSS_LS_container_greenhouse has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.941] [WeldingTool] ..Config KKAOSS_LS_container_greenhouse has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.941] [WeldingTool] ..Config KKAOSS_LS_container_greenhouse has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.941] [WeldingTool] ..Config KKAOSS_LS_container_greenhouse has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.941] [WeldingTool] .Part KKAOSS.LS.container.greenhouse has 1 Stack attach node(s) [LOG 02:33:38.941] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.941] [WeldingTool] New Center of Mass: (0.0, 8.4, 0.2) [LOG 02:33:38.941] [WeldingTool] Part crashTolerance: 15 - Global crashTolerance: 37.24308 - method: WeightedAverage [LOG 02:33:38.941] [WeldingTool] Part crashTolerance: 22 - Global crashTolerance: 421.8257 - method: WeightedAverage [LOG 02:33:38.941] [WeldingTool] Part breakingTorque: 22 - Global breakingTorque: 416.6934 - method: WeightedAverage [LOG 02:33:38.941] [WeldingTool] Part maxTemp: 2000 - Global maxTemp: 2354.322 - method: WeightedAverage [LOG 02:33:38.941] [WeldingTool] Welding this part: KKAOSS.LS.container.greenhouse [LOG 02:33:38.941] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.941] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.941] [WeldingTool] KKAOSS.LS.container.greenhouse Attache mode STACK Attach method FIXED_JOINT [LOG 02:33:38.943] [WeldingTool] .Found 1 config files [LOG 02:33:38.943] [WeldingTool] ..Config KKAOSS_LS_container_greenhouse has 1 MODEL node [LOG 02:33:38.943] [WeldingTool] ..MODEL url: PlanetaryBaseInc/ModSupport/Parts/LifeSupport/Container_Greenhouse [LOG 02:33:38.943] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.943] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.943] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.943] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.943] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.943] [WeldingTool] ..Childs count 1 [LOG 02:33:38.943] [WeldingTool] scaling info: rescaleFactor=1| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.943] [WeldingTool] ..newpart position (-1.173, 4.644, 0.150) [LOG 02:33:38.943] [WeldingTool] ..newpart rotation (0.000, 0.707, -0.707, 0.000) [LOG 02:33:38.943] [WeldingTool] ..newpart rotation.eulerAngles (90.000, 180.000, 0.000) [LOG 02:33:38.943] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 0.000, 180.000) [LOG 02:33:38.943] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.944] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.944] [WeldingTool] ..position (-1.173, 4.644, 0.150) [LOG 02:33:38.944] [WeldingTool] ..rotation (90.000, 180.000, 0.000) [LOG 02:33:38.944] [WeldingTool] ..scale (1.000, 1.000, 1.000) [LOG 02:33:38.944] [WeldingTool] ..Part Part has 3 RESOURCE node [LOG 02:33:38.944] [WeldingTool] ..RESOURCE add: Mulch 0/100 [LOG 02:33:38.944] [WeldingTool] ..RESOURCE add: Supplies 100/100 [LOG 02:33:38.944] [WeldingTool] ..RESOURCE add: Fertilizer 100/100 [LOG 02:33:38.944] [WeldingTool] ..Config KKAOSS_LS_container_greenhouse has 9 MODULE node [LOG 02:33:38.944] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.944] [WeldingTool] | Module ready to add = True [LOG 02:33:38.944] [WeldingTool] | Module ready to add = True [LOG 02:33:38.944] [WeldingTool] | Module ready to add = True [LOG 02:33:38.944] [WeldingTool] | Module ready to add = True [LOG 02:33:38.944] [WeldingTool] | Module ready to add = True [LOG 02:33:38.944] [WeldingTool] | Module ready to add = True [LOG 02:33:38.944] [WeldingTool] | Module ready to add = True [LOG 02:33:38.944] [WeldingTool] | Module ready to add = True [LOG 02:33:38.944] [WeldingTool] | Module ready to add = True [LOG 02:33:38.944] [WeldingTool] | Module ready to add = True [LOG 02:33:38.944] [WeldingTool] | Module ready to add = True [LOG 02:33:38.944] [WeldingTool] | Module ready to add = True [LOG 02:33:38.944] [WeldingTool] | Module ready to add = True [LOG 02:33:38.944] [WeldingTool] | Module ready to add = True [LOG 02:33:38.944] [WeldingTool] | Module ready to add = True [LOG 02:33:38.944] [WeldingTool] | Module ready to add = True [LOG 02:33:38.944] [WeldingTool] | Module ready to add = True [LOG 02:33:38.944] [WeldingTool] | Module ready to add = True [LOG 02:33:38.944] [WeldingTool] | Module ready to add = True [LOG 02:33:38.944] [WeldingTool] | Module ready to add = True [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment Module already exists!!! [LOG 02:33:38.944] [WeldingTool] | BreakingAttributes found = 1 [LOG 02:33:38.944] [WeldingTool] | BreakingAttributes found | current one is experimentID | ExistingValue = KPBS_plantgrowthstudy - NewValue = KPBS_plantgrowthstudy [LOG 02:33:38.944] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - name is string [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - name is merged with value ModuleScienceExperiment [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - experimentID is string [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - experimentID is merged with value KPBS_plantgrowthstudy [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - experimentActionName is string [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - experimentActionName is merged with value Make plant growth study [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - resetActionName is string [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - resetActionName is merged with value Discard Plant Samples [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - reviewActionName is string [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - reviewActionName is merged with value Review Plant Samples [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - useStaging is bool [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - useStaging is merged with value False [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - useActionGroups is bool [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - useActionGroups is merged with value True [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - hideUIwhenUnavailable is bool [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - hideUIwhenUnavailable is merged with value True [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - xmitDataScalar is float [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - newValue - xmitDataScalar = 0.4 [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - existingValue - xmitDataScalar = 0.4 [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - xmitDataScalar - averaged [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - xmitDataScalar is merged with value 0.4 [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - FxModules is float [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - newValue - FxModules = 0 [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - existingValue - FxModules = 0 [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - FxModules - added [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - FxModules is merged with value 0 [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - dataIsCollectable is bool [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - dataIsCollectable is merged with value True [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - collectActionName is string [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - collectActionName is merged with value Collect Plant Samples [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - interactionRange is float [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - newValue - interactionRange = 1.2 [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - existingValue - interactionRange = 1.2 [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - interactionRange - averaged [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - interactionRange is merged with value 1.2 [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - usageReqMaskInternal is float [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - newValue - usageReqMaskInternal = 1 [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - existingValue - usageReqMaskInternal = 3 [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - usageReqMaskInternal - added [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - usageReqMaskInternal is merged with value 4 [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - usageReqMaskExternal is float [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - newValue - usageReqMaskExternal = 8 [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - existingValue - usageReqMaskExternal = 24 [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - usageReqMaskExternal - added [LOG 02:33:38.944] [WeldingTool] | ModuleScienceExperiment - usageReqMaskExternal is merged with value 32 [LOG 02:33:38.945] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.945] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.945] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.945] [WeldingTool] Values done [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | ModuleScienceContainer Module already exists!!! [LOG 02:33:38.945] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.945] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.945] [WeldingTool] | ModuleScienceContainer - name is string [LOG 02:33:38.945] [WeldingTool] | ModuleScienceContainer - name is merged with value ModuleScienceContainer [LOG 02:33:38.945] [WeldingTool] | ModuleScienceContainer - reviewActionName is string [LOG 02:33:38.945] [WeldingTool] | ModuleScienceContainer - reviewActionName is merged with value Review Stored Data [LOG 02:33:38.945] [WeldingTool] | ModuleScienceContainer - storeActionName is string [LOG 02:33:38.945] [WeldingTool] | ModuleScienceContainer - storeActionName is merged with value Store Experiments [LOG 02:33:38.945] [WeldingTool] | ModuleScienceContainer - evaOnlyStorage is bool [LOG 02:33:38.945] [WeldingTool] | ModuleScienceContainer - evaOnlyStorage is merged with value True [LOG 02:33:38.945] [WeldingTool] | ModuleScienceContainer - storageRange is float [LOG 02:33:38.945] [WeldingTool] | ModuleScienceContainer - newValue - storageRange = 2 [LOG 02:33:38.945] [WeldingTool] | ModuleScienceContainer - existingValue - storageRange = 2 [LOG 02:33:38.945] [WeldingTool] | ModuleScienceContainer - storageRange - averaged [LOG 02:33:38.945] [WeldingTool] | ModuleScienceContainer - storageRange is merged with value 2 [LOG 02:33:38.945] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.945] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.945] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.945] [WeldingTool] Values done [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | AYA_Science Module already exists!!! [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | Module ready to add = True [LOG 02:33:38.945] [WeldingTool] | ModuleKPBSConverter Module already exists!!! [LOG 02:33:38.945] [WeldingTool] | BreakingAttributes found = 0 [LOG 02:33:38.945] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.945] [WeldingTool] | ModuleKPBSConverter - name is string [LOG 02:33:38.945] [WeldingTool] | ModuleKPBSConverter - name is merged with value ModuleKPBSConverter [LOG 02:33:38.945] [WeldingTool] | ModuleKPBSConverter - ConverterName is string [LOG 02:33:38.945] [WeldingTool] | ModuleKPBSConverter - ConverterName is merged with value Greenhouse [LOG 02:33:38.945] [WeldingTool] | ModuleKPBSConverter - tag is string [LOG 02:33:38.945] [WeldingTool] | ModuleKPBSConverter - tag is merged with value Greenhouse [LOG 02:33:38.945] [WeldingTool] | ModuleKPBSConverter - StartActionName is string [LOG 02:33:38.945] [WeldingTool] | ModuleKPBSConverter - StartActionName is merged with value Start Greenhouse [LOG 02:33:38.945] [WeldingTool] | ModuleKPBSConverter - StopActionName is string [LOG 02:33:38.945] [WeldingTool] | ModuleKPBSConverter - StopActionName is merged with value Stop Greenhouse [LOG 02:33:38.945] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.946] [WeldingTool] | SubModule BreakingAttributes found = 1 [LOG 02:33:38.946] [WeldingTool] | SubModule BreakingAttributes found | current one is ResourceName | ExistingValue = Supplies - NewValue = Supplies [LOG 02:33:38.946] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.946] [WeldingTool] | Supplies - ResourceName is string [LOG 02:33:38.946] [WeldingTool] | Supplies - ResourceName is merged with value Supplies [LOG 02:33:38.946] [WeldingTool] | Supplies - Ratio is float [LOG 02:33:38.946] [WeldingTool] | Supplies - newValue - Ratio = 0.001275 [LOG 02:33:38.946] [WeldingTool] | Supplies - existingValue - Ratio = 0.003825 [LOG 02:33:38.946] [WeldingTool] | Supplies - Ratio - added [LOG 02:33:38.946] [WeldingTool] | Supplies - Ratio is merged with value 0.0051 [LOG 02:33:38.946] [WeldingTool] | Supplies - DumpExcess is bool [LOG 02:33:38.946] [WeldingTool] | Supplies - DumpExcess is merged with value False [LOG 02:33:38.946] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.946] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.946] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.946] [WeldingTool] Values done [LOG 02:33:38.946] [WeldingTool] | SubModule BreakingAttributes found = 1 [LOG 02:33:38.946] [WeldingTool] | SubModule BreakingAttributes found | current one is ResourceName | ExistingValue = Mulch - NewValue = Mulch [LOG 02:33:38.946] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.946] [WeldingTool] | Mulch - ResourceName is string [LOG 02:33:38.946] [WeldingTool] | Mulch - ResourceName is merged with value Mulch [LOG 02:33:38.946] [WeldingTool] | Mulch - Ratio is float [LOG 02:33:38.946] [WeldingTool] | Mulch - newValue - Ratio = 0.001125 [LOG 02:33:38.946] [WeldingTool] | Mulch - existingValue - Ratio = 0.003375 [LOG 02:33:38.946] [WeldingTool] | Mulch - Ratio - added [LOG 02:33:38.946] [WeldingTool] | Mulch - Ratio is merged with value 0.0045 [LOG 02:33:38.946] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.946] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.946] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.946] [WeldingTool] Values done [LOG 02:33:38.946] [WeldingTool] | SubModule BreakingAttributes found = 1 [LOG 02:33:38.946] [WeldingTool] | SubModule BreakingAttributes found | current one is ResourceName | ExistingValue = Mulch - NewValue = Fertilizer [LOG 02:33:38.946] [WeldingTool] | SubModule BreakingAttributes found = 1 [LOG 02:33:38.946] [WeldingTool] | SubModule BreakingAttributes found | current one is ResourceName | ExistingValue = Fertilizer - NewValue = Fertilizer [LOG 02:33:38.946] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.946] [WeldingTool] | Fertilizer - ResourceName is string [LOG 02:33:38.946] [WeldingTool] | Fertilizer - ResourceName is merged with value Fertilizer [LOG 02:33:38.946] [WeldingTool] | Fertilizer - Ratio is float [LOG 02:33:38.946] [WeldingTool] | Fertilizer - newValue - Ratio = 0.00015 [LOG 02:33:38.946] [WeldingTool] | Fertilizer - existingValue - Ratio = 0.00045 [LOG 02:33:38.946] [WeldingTool] | Fertilizer - Ratio - added [LOG 02:33:38.946] [WeldingTool] | Fertilizer - Ratio is merged with value 0.0006 [LOG 02:33:38.946] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.946] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.946] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.946] [WeldingTool] Values done [LOG 02:33:38.946] [WeldingTool] | SubModule BreakingAttributes found = 1 [LOG 02:33:38.946] [WeldingTool] | SubModule BreakingAttributes found | current one is ResourceName | ExistingValue = Mulch - NewValue = ElectricCharge [LOG 02:33:38.946] [WeldingTool] | SubModule BreakingAttributes found = 1 [LOG 02:33:38.946] [WeldingTool] | SubModule BreakingAttributes found | current one is ResourceName | ExistingValue = Fertilizer - NewValue = ElectricCharge [LOG 02:33:38.946] [WeldingTool] | SubModule BreakingAttributes found = 1 [LOG 02:33:38.946] [WeldingTool] | SubModule BreakingAttributes found | current one is ResourceName | ExistingValue = ElectricCharge - NewValue = ElectricCharge [LOG 02:33:38.946] [WeldingTool] Pre mergeModuleAttributes [LOG 02:33:38.946] [WeldingTool] | ElectricCharge - ResourceName is string [LOG 02:33:38.946] [WeldingTool] | ElectricCharge - ResourceName is merged with value ElectricCharge [LOG 02:33:38.946] [WeldingTool] | ElectricCharge - Ratio is float [LOG 02:33:38.946] [WeldingTool] | ElectricCharge - newValue - Ratio = 5 [LOG 02:33:38.946] [WeldingTool] | ElectricCharge - existingValue - Ratio = 15 [LOG 02:33:38.946] [WeldingTool] | ElectricCharge - Ratio - added [LOG 02:33:38.946] [WeldingTool] | ElectricCharge - Ratio is merged with value 20 [LOG 02:33:38.946] [WeldingTool] Pre mergeSubModules [LOG 02:33:38.946] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.946] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.946] [WeldingTool] Values done [LOG 02:33:38.946] [WeldingTool] Pre mergeVector2Modules [LOG 02:33:38.946] [WeldingTool] Pre mergeVector4Modules [LOG 02:33:38.946] [WeldingTool] Values done [LOG 02:33:38.946] [WeldingTool] | Module ready to add = True [LOG 02:33:38.946] [WeldingTool] | Module ready to add = True [LOG 02:33:38.946] [WeldingTool] | Module ready to add = True [LOG 02:33:38.946] [WeldingTool] | Module ready to add = True [LOG 02:33:38.946] [WeldingTool] | Module ready to add = True [LOG 02:33:38.946] [WeldingTool] | Module ready to add = True [LOG 02:33:38.946] [WeldingTool] | Module ready to add = True [LOG 02:33:38.946] [WeldingTool] | Module ready to add = True [LOG 02:33:38.946] [WeldingTool] | ModuleResourceActions2 Module already exists!!! [LOG 02:33:38.946] [WeldingTool] | Module ready to add = True [LOG 02:33:38.946] [WeldingTool] | Module ready to add = True [LOG 02:33:38.946] [WeldingTool] | Module ready to add = True [LOG 02:33:38.946] [WeldingTool] | Module ready to add = True [LOG 02:33:38.946] [WeldingTool] | Module ready to add = True [LOG 02:33:38.946] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.946] [WeldingTool] ..Config KKAOSS_LS_container_greenhouse has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.946] [WeldingTool] ..Config KKAOSS_LS_container_greenhouse has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.946] [WeldingTool] ..Config KKAOSS_LS_container_greenhouse has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.946] [WeldingTool] ..Config KKAOSS_LS_container_greenhouse has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.946] [WeldingTool] .Part KKAOSS.LS.container.greenhouse has 1 Stack attach node(s) [LOG 02:33:38.946] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.946] [WeldingTool] New Center of Mass: (0.0, 8.4, 0.2) [LOG 02:33:38.946] [WeldingTool] Part crashTolerance: 15 - Global crashTolerance: 36.99401 - method: WeightedAverage [LOG 02:33:38.946] [WeldingTool] Part crashTolerance: 22 - Global crashTolerance: 417.3486 - method: WeightedAverage [LOG 02:33:38.946] [WeldingTool] Part breakingTorque: 22 - Global breakingTorque: 412.2737 - method: WeightedAverage [LOG 02:33:38.946] [WeldingTool] Part maxTemp: 2000 - Global maxTemp: 2350.354 - method: WeightedAverage [LOG 02:33:38.946] [WeldingTool] Welding this part: KKAOSS.LS.container.USILS.noms.big [LOG 02:33:38.947] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.947] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.947] [WeldingTool] KKAOSS.LS.container.USILS.noms.big Attache mode STACK Attach method FIXED_JOINT [LOG 02:33:38.949] [WeldingTool] .Found 1 config files [LOG 02:33:38.949] [WeldingTool] ..Config KKAOSS_LS_container_USILS_noms_big has 1 MODEL node [LOG 02:33:38.949] [WeldingTool] ..MODEL url: PlanetaryBaseInc/ModSupport/Parts/LifeSupport/Container_Noms_big [LOG 02:33:38.949] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.949] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.949] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.949] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.949] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.949] [WeldingTool] ..Childs count 1 [LOG 02:33:38.949] [WeldingTool] scaling info: rescaleFactor=1| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.949] [WeldingTool] ..newpart position (-1.700, 4.225, -0.400) [LOG 02:33:38.949] [WeldingTool] ..newpart rotation (-0.707, 0.000, -0.707, 0.000) [LOG 02:33:38.949] [WeldingTool] ..newpart rotation.eulerAngles (0.000, 90.000, 180.000) [LOG 02:33:38.949] [WeldingTool] ..newpart rotation.localEulerAngles (0.000, 90.000, 90.000) [LOG 02:33:38.949] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.949] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.949] [WeldingTool] ..position (-1.700, 4.225, -0.400) [LOG 02:33:38.949] [WeldingTool] ..rotation (0.000, 90.000, 180.000) [LOG 02:33:38.949] [WeldingTool] ..scale (1.000, 1.000, 1.000) [LOG 02:33:38.949] [WeldingTool] ..Part Part has 1 RESOURCE node [LOG 02:33:38.949] [WeldingTool] ..RESOURCE add: Supplies 2000/2000 [LOG 02:33:38.949] [WeldingTool] ..Config KKAOSS_LS_container_USILS_noms_big has 5 MODULE node [LOG 02:33:38.949] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.949] [WeldingTool] | Module ready to add = True [LOG 02:33:38.949] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.949] [WeldingTool] | Module ready to add = True [LOG 02:33:38.949] [WeldingTool] | Module ready to add = True [LOG 02:33:38.949] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.949] [WeldingTool] | Module ready to add = True [LOG 02:33:38.949] [WeldingTool] | Module ready to add = True [LOG 02:33:38.949] [WeldingTool] | Module ready to add = True [LOG 02:33:38.949] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.949] [WeldingTool] | Module ready to add = True [LOG 02:33:38.949] [WeldingTool] | Module ready to add = True [LOG 02:33:38.949] [WeldingTool] | Module ready to add = True [LOG 02:33:38.949] [WeldingTool] | Module ready to add = True [LOG 02:33:38.949] [WeldingTool] | Module ready to add = True [LOG 02:33:38.949] [WeldingTool] | Module ready to add = True [LOG 02:33:38.949] [WeldingTool] | Module ready to add = True [LOG 02:33:38.949] [WeldingTool] | Module ready to add = True [LOG 02:33:38.949] [WeldingTool] | ModuleResourceActions2 Module already exists!!! [LOG 02:33:38.949] [WeldingTool] | Module ready to add = True [LOG 02:33:38.949] [WeldingTool] | Module ready to add = True [LOG 02:33:38.949] [WeldingTool] | Module ready to add = True [LOG 02:33:38.949] [WeldingTool] | Module ready to add = True [LOG 02:33:38.949] [WeldingTool] | Module ready to add = True [LOG 02:33:38.949] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.949] [WeldingTool] ..Config KKAOSS_LS_container_USILS_noms_big has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.949] [WeldingTool] ..Config KKAOSS_LS_container_USILS_noms_big has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.949] [WeldingTool] ..Config KKAOSS_LS_container_USILS_noms_big has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.949] [WeldingTool] ..Config KKAOSS_LS_container_USILS_noms_big has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.949] [WeldingTool] .Part KKAOSS.LS.container.USILS.noms.big has 1 Stack attach node(s) [LOG 02:33:38.949] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.949] [WeldingTool] New Center of Mass: (0.0, 8.4, 0.2) [LOG 02:33:38.949] [WeldingTool] Part crashTolerance: 15 - Global crashTolerance: 36.89594 - method: WeightedAverage [LOG 02:33:38.950] [WeldingTool] Part crashTolerance: 22 - Global crashTolerance: 415.5857 - method: WeightedAverage [LOG 02:33:38.950] [WeldingTool] Part breakingTorque: 22 - Global breakingTorque: 410.5335 - method: WeightedAverage [LOG 02:33:38.950] [WeldingTool] Part maxTemp: 2000 - Global maxTemp: 2348.792 - method: WeightedAverage [LOG 02:33:38.950] [WeldingTool] Welding this part: KER.Crate [LOG 02:33:38.950] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.950] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.950] [WeldingTool] KER.Crate Attache mode SRF_ATTACH Attach method FIXED_JOINT [LOG 02:33:38.952] [WeldingTool] .Found 1 config files [LOG 02:33:38.952] [WeldingTool] ..Config KER_Crate has 1 MODEL node [LOG 02:33:38.952] [WeldingTool] ..MODEL url: UmbraSpaceIndustries/Karibou/Assets/KER_Crate [LOG 02:33:38.952] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.952] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.952] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.952] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.952] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.952] [WeldingTool] ..Childs count 1 [LOG 02:33:38.952] [WeldingTool] scaling info: rescaleFactor=1| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.952] [WeldingTool] ..newpart position (0.000, 5.475, 0.424) [LOG 02:33:38.952] [WeldingTool] ..newpart rotation (0.000, -0.707, 0.707, 0.000) [LOG 02:33:38.952] [WeldingTool] ..newpart rotation.eulerAngles (90.000, 180.000, 0.000) [LOG 02:33:38.952] [WeldingTool] ..newpart rotation.localEulerAngles (90.000, 180.000, 0.000) [LOG 02:33:38.952] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.952] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.952] [WeldingTool] ..position (0.000, 5.475, 0.424) [LOG 02:33:38.952] [WeldingTool] ..rotation (90.000, 180.000, 0.000) [LOG 02:33:38.952] [WeldingTool] ..scale (1.000, 1.000, 1.000) [LOG 02:33:38.952] [WeldingTool] ..Part Part has 1 RESOURCE node [LOG 02:33:38.952] [WeldingTool] ..RESOURCE add: Supplies 2500/2500 [LOG 02:33:38.952] [WeldingTool] ..Config KER_Crate has 8 MODULE node [LOG 02:33:38.952] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] [WeldingTool] ..MODULE add: FStextureSwitch2 [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.952] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] [WeldingTool] ..MODULE add: USI_ModuleResourceWarehouse [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] [WeldingTool] ..MODULE add: USI_ModuleRecycleBin [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | Module ready to add = True [LOG 02:33:38.953] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.953] [WeldingTool] ..Config KER_Crate has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.953] [WeldingTool] ..Config KER_Crate has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.953] [WeldingTool] ..Config KER_Crate has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.953] [WeldingTool] ..Config KER_Crate has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.953] [WeldingTool] .Part KER.Crate has 1 Stack attach node(s) [LOG 02:33:38.953] [WeldingTool] ..set relative position =(0.000, 5.475, 0.424) | localroot=(0.000, 15.125, 0.000) [LOG 02:33:38.953] [WeldingTool] .Stack Node Add: rackKER.Crate43 [LOG 02:33:38.953] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.953] [WeldingTool] New Center of Mass: (0.0, 8.4, 0.2) [LOG 02:33:38.953] [WeldingTool] Part crashTolerance: 45 - Global crashTolerance: 36.96758 - method: WeightedAverage [LOG 02:33:38.953] [WeldingTool] Part crashTolerance: 2800 - Global crashTolerance: 436.6623 - method: WeightedAverage [LOG 02:33:38.953] [WeldingTool] Part breakingTorque: 2800 - Global breakingTorque: 431.6547 - method: WeightedAverage [LOG 02:33:38.953] [WeldingTool] Part maxTemp: 1700 - Global maxTemp: 2343.057 - method: WeightedAverage [LOG 02:33:38.953] [WeldingTool] Welding this part: spotLight2 [LOG 02:33:38.953] [WeldingTool] ..part rescaleFactor 1.00 [LOG 02:33:38.953] [WeldingTool] ..part scaleFactor 1.00 [LOG 02:33:38.953] [WeldingTool] spotLight2 Attache mode SRF_ATTACH Attach method FIXED_JOINT [LOG 02:33:38.956] [WeldingTool] .Found 1 config files [LOG 02:33:38.956] [WeldingTool] ..Config spotLight2 has 1 MODEL node [LOG 02:33:38.956] [WeldingTool] ..MODEL url: VenStockRevamp/Squad/Parts/Electrical/Lights/MK2 [LOG 02:33:38.956] [WeldingTool] ..node.HasValue("position") False [LOG 02:33:38.956] [WeldingTool] ..node position (0.000, 0.000, 0.000) [LOG 02:33:38.956] [WeldingTool] ..node.HasValue("rotation") False [LOG 02:33:38.956] [WeldingTool] ..node rotation (0.000, 0.000, 0.000) [LOG 02:33:38.956] [WeldingTool] ..node.HasValue("scale") False [LOG 02:33:38.956] [WeldingTool] ..Childs count 1 [LOG 02:33:38.956] [WeldingTool] scaling info: rescaleFactor=1| scale=1| config.scale=(0.000, 0.000, 0.000) [LOG 02:33:38.956] [WeldingTool] ..newpart position (0.000, 13.825, -2.000) [LOG 02:33:38.956] [WeldingTool] ..newpart rotation (0.383, 0.000, 0.000, -0.924) [LOG 02:33:38.956] [WeldingTool] ..newpart rotation.eulerAngles (315.000, 0.000, 0.000) [LOG 02:33:38.956] [WeldingTool] ..newpart rotation.localEulerAngles (315.000, 0.000, 0.000) [LOG 02:33:38.956] [WeldingTool] ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000) [LOG 02:33:38.956] [WeldingTool] ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000) [LOG 02:33:38.956] [WeldingTool] ..position (0.000, 13.825, -2.000) [LOG 02:33:38.956] [WeldingTool] ..rotation (315.000, 0.000, 0.000) [LOG 02:33:38.956] [WeldingTool] ..scale (1.000, 1.000, 1.000) [LOG 02:33:38.956] [WeldingTool] ..Part Part has 0 RESOURCE node [LOG 02:33:38.956] [WeldingTool] ..Config spotLight2 has 6 MODULE node [LOG 02:33:38.956] [WeldingTool] .. running in Alewx Testmode = True [LOG 02:33:38.956] [WeldingTool] | Module ready to add = True [LOG 02:33:38.956] [WeldingTool] | Module ready to add = True [LOG 02:33:38.956] [WeldingTool] | Module ready to add = True [LOG 02:33:38.956] [WeldingTool] | Module ready to add = True [LOG 02:33:38.956] [WeldingTool] | Module ready to add = True [LOG 02:33:38.956] [WeldingTool] | Module ready to add = True [LOG 02:33:38.956] [WeldingTool] | Module ready to add = True [LOG 02:33:38.956] [WeldingTool] | Module ready to add = True [LOG 02:33:38.956] [WeldingTool] | Module ready to add = True [LOG 02:33:38.956] [WeldingTool] | Module ready to add = True [LOG 02:33:38.956] [WeldingTool] | Module ready to add = True [LOG 02:33:38.956] [WeldingTool] | Module ready to add = True [LOG 02:33:38.956] [WeldingTool] | Module ready to add = True [LOG 02:33:38.956] [WeldingTool] | Module ready to add = True [LOG 02:33:38.956] [WeldingTool] | Module ready to add = True [LOG 02:33:38.956] [WeldingTool] | Module ready to add = True [LOG 02:33:38.956] [WeldingTool] | Module ready to add = True [LOG 02:33:38.956] [WeldingTool] | Module ready to add = True [LOG 02:33:38.956] [WeldingTool] | Module ready to add = True [LOG 02:33:38.956] [WeldingTool] | Module ready to add = True [LOG 02:33:38.956] [WeldingTool] | Module ready to add = True [LOG 02:33:38.956] [WeldingTool] | Module ready to add = True [LOG 02:33:38.956] [WeldingTool] | Module ready to add = True [LOG 02:33:38.956] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] [WeldingTool] ..MODULE add: ModuleLight [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | ModuleAGX Module already exists!!! [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | ModuleModActions Module already exists!!! [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | HotSpotModule Module already exists!!! [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | Module ready to add = True [LOG 02:33:38.957] [WeldingTool] | ModuleFuelCrossfeedActions2 Module already exists!!! [LOG 02:33:38.957] [WeldingTool] ..Config spotLight2 has 0 FXEmitters and 0 Sound in prelaunch FxGroups [LOG 02:33:38.957] [WeldingTool] ..Config spotLight2 has 0 FXEmitters and 0 Sound in activate FxGroups [LOG 02:33:38.957] [WeldingTool] ..Config spotLight2 has 0 FXEmitters and 0 Sound in active FxGroups [LOG 02:33:38.957] [WeldingTool] ..Config spotLight2 has 0 FXEmitters and 0 Sound in deactivate FxGroups [LOG 02:33:38.957] [WeldingTool] .Part spotLight2 has 0 Stack attach node(s) [LOG 02:33:38.957] [WeldingTool] .. VesselType - Debris [LOG 02:33:38.957] [WeldingTool] New Center of Mass: (0.0, 8.4, 0.2) [LOG 02:33:38.957] [WeldingTool] Part crashTolerance: 8 - Global crashTolerance: 36.96437 - method: WeightedAverage [LOG 02:33:38.957] [WeldingTool] Part crashTolerance: 22 - Global crashTolerance: 436.6165 - method: WeightedAverage [LOG 02:33:38.957] [WeldingTool] Part breakingTorque: 22 - Global breakingTorque: 431.6095 - method: WeightedAverage [LOG 02:33:38.957] [WeldingTool] Part maxTemp: 2000 - Global maxTemp: 2343.02 - method: WeightedAverage [LOG 02:33:38.960] [WeldingTool] rdTechs.Count = 114 [LOG 02:33:38.960] [WeldingTool] ----- End Welding ----- | 45 Parts welded [LOG 02:33:38.960] [WeldingTool] welder.Category: 0 [LOG 02:33:50.065] [WeldingTool] Writing File: GameData/UbioWeldingLtd/Parts/Structural/test/test.cfg [LOG 02:33:50.070] [WeldingTool] Writing File: GameData/UbioWeldingLtd/Parts/Structural/test/test.cfg successful [LOG 02:33:50.070] [WeldingTool] Writing File: GameData/UbioWeldingLtd/Parts/Structural/test/testInternal.cfg successful [LOG 02:33:50.076] [ModuleManager] Ran in 27.883s [LOG 02:33:50.077] [ModuleManager] Ran in 27.883s [LOG 02:33:50.083] [ModuleManager] Ran in 27.883s [LOG 02:33:50.084] [ModuleManager] Ran in 27.883s [LOG 02:33:50.101] [ModuleManager] Ran in 27.883s [LOG 02:33:50.102] [ModuleManager] Ran in 27.883s [LOG 02:33:50.117] [ModuleManager] Ran in 27.883s [LOG 02:33:50.118] [ModuleManager] Ran in 27.883s [LOG 02:33:50.134] [ModuleManager] Ran in 27.883s [LOG 02:33:50.135] [ModuleManager] Ran in 27.883s [LOG 02:33:50.150] [ModuleManager] Ran in 27.883s [LOG 02:33:50.151] [ModuleManager] Ran in 27.883s [LOG 02:33:50.169] [ModuleManager] Ran in 27.883s [LOG 02:33:50.170] [ModuleManager] Ran in 27.883s [LOG 02:33:50.183] [ModuleManager] Ran in 27.883s [LOG 02:33:50.184] [ModuleManager] Ran in 27.883s [LOG 02:33:50.202] [ModuleManager] Ran in 27.883s [LOG 02:33:50.203] [ModuleManager] Ran in 27.883s [LOG 02:33:50.217] [ModuleManager] Ran in 27.883s [LOG 02:33:50.217] [ModuleManager] Ran in 27.883s [LOG 02:33:50.235] [ModuleManager] Ran in 27.883s [LOG 02:33:50.237] [ModuleManager] Ran in 27.883s [LOG 02:33:50.250] [ModuleManager] Ran in 27.883s [LOG 02:33:50.250] [ModuleManager] Ran in 27.883s [LOG 02:33:50.268] [ModuleManager] Ran in 27.883s [LOG 02:33:50.269] [ModuleManager] Ran in 27.883s [LOG 02:33:50.283] [ModuleManager] Ran in 27.883s [LOG 02:33:50.284] [ModuleManager] Ran in 27.883s [LOG 02:33:50.301] [ModuleManager] Ran in 27.883s [LOG 02:33:50.302] [ModuleManager] Ran in 27.883s [LOG 02:33:50.317] [ModuleManager] Ran in 27.883s [LOG 02:33:50.318] [ModuleManager] Ran in 27.883s [LOG 02:33:50.333] [ModuleManager] Ran in 27.883s [LOG 02:33:50.335] [ModuleManager] Ran in 27.883s [LOG 02:33:50.350] [ModuleManager] Ran in 27.883s [LOG 02:33:50.351] [ModuleManager] Ran in 27.883s [LOG 02:33:50.368] [ModuleManager] Ran in 27.883s [LOG 02:33:50.369] [ModuleManager] Ran in 27.883s [LOG 02:33:50.385] [ModuleManager] Ran in 27.883s [LOG 02:33:50.386] [ModuleManager] Ran in 27.883s [LOG 02:33:50.401] [ModuleManager] Ran in 27.883s [LOG 02:33:50.401] [ModuleManager] Ran in 27.883s [LOG 02:33:50.418] [ModuleManager] Ran in 27.883s [LOG 02:33:50.420] [ModuleManager] Ran in 27.883s [LOG 02:33:50.433] [ModuleManager] Ran in 27.883s [LOG 02:33:50.434] [ModuleManager] Ran in 27.883s [LOG 02:33:50.451] [ModuleManager] Ran in 27.883s [LOG 02:33:50.452] [ModuleManager] Ran in 27.883s [LOG 02:33:50.467] [ModuleManager] Ran in 27.883s [LOG 02:33:50.467] [ModuleManager] Ran in 27.883s [LOG 02:33:50.483] [ModuleManager] Ran in 27.883s [LOG 02:33:50.484] [ModuleManager] Ran in 27.883s [LOG 02:33:50.500] [ModuleManager] Ran in 27.883s [LOG 02:33:50.501] [ModuleManager] Ran in 27.883s [LOG 02:33:50.517] [ModuleManager] Ran in 27.883s [LOG 02:33:50.518] [ModuleManager] Ran in 27.883s [LOG 02:33:50.534] [ModuleManager] Ran in 27.883s [LOG 02:33:50.535] [ModuleManager] Ran in 27.883s [LOG 02:33:50.551] [ModuleManager] Ran in 27.883s [LOG 02:33:50.552] [ModuleManager] Ran in 27.883s [LOG 02:33:50.567] [ModuleManager] Ran in 27.883s [LOG 02:33:50.568] [ModuleManager] Ran in 27.883s [LOG 02:33:50.584] [ModuleManager] Ran in 27.883s [LOG 02:33:50.585] [ModuleManager] Ran in 27.883s [LOG 02:33:50.600] [ModuleManager] Ran in 27.883s [LOG 02:33:50.601] [ModuleManager] Ran in 27.883s [LOG 02:33:50.617] [ModuleManager] Ran in 27.883s [LOG 02:33:50.618] [ModuleManager] Ran in 27.883s [LOG 02:33:50.634] [ModuleManager] Ran in 27.883s [LOG 02:33:50.634] [ModuleManager] Ran in 27.883s [LOG 02:33:50.652] [ModuleManager] Ran in 27.883s [LOG 02:33:50.653] [ModuleManager] Ran in 27.883s [LOG 02:33:50.667] [ModuleManager] Ran in 27.883s [LOG 02:33:50.668] [ModuleManager] Ran in 27.883s [LOG 02:33:50.684] [ModuleManager] Ran in 27.883s [LOG 02:33:50.685] [ModuleManager] Ran in 27.883s [LOG 02:33:50.701] [ModuleManager] Ran in 27.883s [LOG 02:33:50.701] [ModuleManager] Ran in 27.883s [LOG 02:33:50.717] [ModuleManager] Ran in 27.883s [LOG 02:33:50.718] [ModuleManager] Ran in 27.883s [LOG 02:33:50.734] [ModuleManager] Ran in 27.883s [LOG 02:33:50.736] [ModuleManager] Ran in 27.883s [LOG 02:33:50.750] [ModuleManager] Ran in 27.883s [LOG 02:33:50.750] [ModuleManager] Ran in 27.883s [LOG 02:33:50.768] [ModuleManager] Ran in 27.883s [LOG 02:33:50.769] [ModuleManager] Ran in 27.883s [LOG 02:33:50.784] [ModuleManager] Ran in 27.883s [LOG 02:33:50.784] [ModuleManager] Ran in 27.883s [LOG 02:33:50.800] [ModuleManager] Ran in 27.883s [LOG 02:33:50.800] [ModuleManager] Ran in 27.883s [LOG 02:33:50.818] [ModuleManager] Ran in 27.883s [LOG 02:33:50.819] [ModuleManager] Ran in 27.883s [LOG 02:33:50.834] [ModuleManager] Ran in 27.883s [LOG 02:33:50.834] [ModuleManager] Ran in 27.883s [LOG 02:33:50.851] [ModuleManager] Ran in 27.883s [LOG 02:33:50.852] [ModuleManager] Ran in 27.883s [LOG 02:33:50.867] [ModuleManager] Ran in 27.883s [LOG 02:33:50.867] [ModuleManager] Ran in 27.883s [LOG 02:33:50.888] [ModuleManager] Ran in 27.883s [LOG 02:33:50.889] [ModuleManager] Ran in 27.883s [LOG 02:33:50.900] [ModuleManager] Ran in 27.883s [LOG 02:33:50.901] [ModuleManager] Ran in 27.883s [LOG 02:33:50.917] [ModuleManager] Ran in 27.883s [LOG 02:33:50.918] [ModuleManager] Ran in 27.883s [LOG 02:33:50.934] [ModuleManager] Ran in 27.883s [LOG 02:33:50.934] [ModuleManager] Ran in 27.883s [LOG 02:33:50.950] [ModuleManager] Ran in 27.883s [LOG 02:33:50.951] [ModuleManager] Ran in 27.883s [LOG 02:33:50.968] [ModuleManager] Ran in 27.883s [LOG 02:33:50.969] [ModuleManager] Ran in 27.883s [LOG 02:33:50.983] [ModuleManager] Ran in 27.883s [LOG 02:33:50.984] [ModuleManager] Ran in 27.883s [LOG 02:33:51.001] [ModuleManager] Ran in 27.883s [LOG 02:33:51.002] [ModuleManager] Ran in 27.883s [LOG 02:33:51.017] [ModuleManager] Ran in 27.883s [LOG 02:33:51.017] [ModuleManager] Ran in 27.883s [LOG 02:33:51.034] [ModuleManager] Ran in 27.883s [LOG 02:33:51.035] [ModuleManager] Ran in 27.883s [LOG 02:33:51.050] [ModuleManager] Ran in 27.883s [LOG 02:33:51.051] [ModuleManager] Ran in 27.883s [LOG 02:33:51.067] [ModuleManager] Ran in 27.883s [LOG 02:33:51.068] [ModuleManager] Ran in 27.883s [LOG 02:33:51.084] [ModuleManager] Ran in 27.883s [LOG 02:33:51.086] [ModuleManager] Ran in 27.883s Finally, here are the output (weldment part config) and craft file: https://drive.google.com/open?id=0B9nA9XkW6TGlVXU4OXk4NXN2dzQ Quote Link to comment Share on other sites More sharing options...
Bluebottle Posted February 21, 2017 Share Posted February 21, 2017 Another comment (here because editing that post causes my browser to complain about unresponsive script errors): The B9 "cannot find subtype named Lowered_LFO" error on craft load is because of an update from B9 6.2.1 to 6.3.1, but I updated as one part of trying to troubleshoot the welding problem. The problem happened before that update, and it happens after the update too. The weldment in my Google drive link is fresh and just created. The problem is still there, though. Quote Link to comment Share on other sites More sharing options...
Alewx Posted February 23, 2017 Share Posted February 23, 2017 On 21.02.2017 at 2:53 PM, Bluebottle said: Another comment (here because editing that post causes my browser to complain about unresponsive script errors): The B9 "cannot find subtype named Lowered_LFO" error on craft load is because of an update from B9 6.2.1 to 6.3.1, but I updated as one part of trying to troubleshoot the welding problem. The problem happened before that update, and it happens after the update too. The weldment in my Google drive link is fresh and just created. The problem is still there, though. Ok, but give me some time 224 mods, man you are crazy . Quote Link to comment Share on other sites More sharing options...
Bluebottle Posted February 23, 2017 Share Posted February 23, 2017 1 hour ago, Alewx said: Ok, but give me some time 224 mods, man you are crazy . No problem at all. Yep, crazy is the word. I had to get 32GB of RAM just to run the game (KSP is usually 24-28GB) With that many great parts, welding is the only way to make huge machines like the (crazy) Heavy Fuel Tanker Ganymede: She's just over 6500 tons wet. She falls apart immediately without welding, but with welding everything is fine! Only ~70 "parts" too. Thanks for making welding work so well! Quote Link to comment Share on other sites More sharing options...
Alewx Posted February 24, 2017 Share Posted February 24, 2017 23 hours ago, Bluebottle said: No problem at all. Yep, crazy is the word. I had to get 32GB of RAM just to run the game (KSP is usually 24-28GB) With that many great parts, welding is the only way to make huge machines like the (crazy) Heavy Fuel Tanker Ganymede: She's just over 6500 tons wet. She falls apart immediately without welding, but with welding everything is fine! Only ~70 "parts" too. Thanks for making welding work so well! OMG, that is really a ship^^ Quote Link to comment Share on other sites More sharing options...
Den.kg Posted March 8, 2017 Share Posted March 8, 2017 (edited) Guys help, after welding the parts are shifted center of mass and aerodynamic overlay, even if you do not use the wings the center of mass is still shifted. The strenght parameters were changed before welding the parts, the result is the same. https://drive.google.com/open?id=0B6lnx7eziENzUk5IbzhlTXROSTA https://drive.google.com/open?id=0B6lnx7eziENzOFdySktZaExscmc https://drive.google.com/open?id=0B6lnx7eziENzU01RaUl1ODNGdWM Edited March 8, 2017 by Den.kg Quote Link to comment Share on other sites More sharing options...
Bornholio Posted March 14, 2017 Share Posted March 14, 2017 Amazed at the gains this mod gives me. /Thumbsup Quote Link to comment Share on other sites More sharing options...
Jumberlack Posted March 22, 2017 Share Posted March 22, 2017 so I'm building a starship and that involves many many structural panels, and after welding the front half of the ship together, I decided to test launch just that half. anyways even though there were only 5 parts technically (the welded part and 4 launch clamps) but it still took forever and a half to load in and framerates were pretty crap. Have I overestimated the capabilities of this mod or have I just done something wrong? Quote Link to comment Share on other sites More sharing options...
Bluebottle Posted March 23, 2017 Share Posted March 23, 2017 (edited) 7 hours ago, Jumberlack said: so I'm building a starship and that involves many many structural panels, and after welding the front half of the ship together, I decided to test launch just that half. anyways even though there were only 5 parts technically (the welded part and 4 launch clamps) but it still took forever and a half to load in and framerates were pretty crap. Have I overestimated the capabilities of this mod or have I just done something wrong? The game still has to load all those meshes, their transforms, and their colliders. Then the physics engine still has to check all those colliders. Welding just removes the physics/stress/connections between the welded parts, but not the collider side of things. Also, some parts are very geometry-heavy, like the parts by great modders like Nertea, or have complicated shader setups, and having lots of those parts will still produce challenges for your graphics card. Edited March 23, 2017 by Bluebottle Quote Link to comment Share on other sites More sharing options...
Operation40 Posted March 31, 2017 Share Posted March 31, 2017 thank you for this mod! I went and did what is specifically warned not to do and it's fantastic http://steamcommunity.com/sharedfiles/filedetails/?id=894943000 some .cfg / plume editing was required.. but those ion clusters are saving me 200+ parts.. TY! Quote Link to comment Share on other sites More sharing options...
spomb Posted April 1, 2017 Share Posted April 1, 2017 Dear Alewx and girka2k, first of all, thank you for remastering this mod. But still I have a question about the mod: I planned a hexagonal station with six parts. These parts should been mounted in space. Each part was welded out of 350 peaces. Loading time for one hexagon-module is about 30 seconds, regardless if loaded from tracking station or if loaded from VAB. For two it's about three minutes. For three more than six. And all six at once need about 45 minutes. Do you or anyone else know what causes these long loading times? In a perfect world these parts should load like six normal parts - in an instant. And if loaded everything works fluid und perfect indeed. Please don't read this as criticism. In the first place I'm curious. Is it a GPU- ore a CPU-Problem? A conflict with a mod? Something else? What do you think? My mods are: - mechjeb - more or less all nertea mods (near future…) - chatterer - KIS - AlarmClock - Construction Hardware/Software Intel i7, 16GB Ram, Windows 10 Quote Link to comment Share on other sites More sharing options...
TheRagingIrishman Posted April 1, 2017 Share Posted April 1, 2017 @spomb the problem is that even if the parts are welded, you still have load all the models and colliders meaning that even if you only have 6 parts, it still has to load the equivalent of 350 parts. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.