Srilania

Considering part of the cancellation of the X-33 was the failure of the honeycomb composite? I don't know if you really want to borrow that technology when it's proven to fail.

This has always been an issue with the stock EL parts. Large, clumsy, and hard to get around. For instance, the Spherical launchpads, while heavy, were a lot more compact and easy to get around. Kethane drills are easier to deal with, and scanners more in line with the application. The type 2 launchpad is about ok, though can klutz up and trap things on it sometimes. What would work a lot better is using the smaller hexcans or even reusing normal inline or radial mounts. I'd point to the kethane pack to get an idea of sizes and how to handle things a little better.

still looking for a fix or suggestion for my issues and woes.

Ok, replaced KSP with a fresh install and tried just deleting all plugins with the exception of mechjeb 2. Replaced the warp plugin from both sources. oddly enough, if I attach to the sides, it's fine, but attach to the bottom, and it poofs and is gone. I do get an option to manually shut down, but once shut down, it's dead in the water. if it goes down automatically, unless there's uranium available, it dies off and can't be restarted. Also, only by lifting to the center of the reactor, where the AEGELESS circle seal is, nothing shows for EVA options whatsoever.

just tested with a fresh install of KSP, and ONLY the warp plugin. Same errors and issues crop up, the processor doesn't rez unless you make it the root part, and it self deletes out of any saves. Also, nuke reactors have NO eva options, and when in cockpit, only has the enable tritium breeding.

Mods used- B9 Bio Fuels Exurgent Engineering Extraplanetary Launchpads Hexcans (included in the interplanetary) Hooligan Labs Airships KAS Kethane Kinetech Animation KW Rocketry L Tech Mechjeb 2 ModsbyTal (spherical and torroidal tanks) Near Future pack Treeloader (included in interplanetary) Warp Plugin Just removed the firespitter entirely, to see if that could be a problem, as I kept it for the wings, but rather lose some wings than have a broken setup. testing in sandbox for the compatability now

My kerbal is right next to the reactor. ANY closer, and my kerbal would be doing something from a racy movie, instead of trying to fix anything. I might have to uninstall different plugins, to find what one's causing the issue, which is annoying at the least, since that means a lot of trial and errors and researching the tech trees over and over to get it figured out. But, I don't understand why it's the installation I did, as it was done as per usual instructions.

the update seems to be more and more of a headache. I can't get the processing part to rez unless it's the root, when the reactor shuts down and says "EVA REPAIRS REQUIRED. I EVA, and I get no options to do anything to the reactor. add to it the other headaches, and it's just a pit of frustration

Tested, and yes, the processor, once set as a root part, does rez, but any other spot and it poofs. It would make more sense to be able to pump the fluids from the safety of a cockpit or radiation hardened safety bunker, instead of right up against it, though it seems with KAS, it slowly evens out the resources along all the spots. And no, I don't get an option to pump anything in an EVA form a reactor, just shutdown

still having the same issue, the refinery doesn't rez, so the plugin can't be used to do anything, and the tanks of UF4fuel can't pump around.

Not sure if this is the information you want. the reprocessor is attached to the reactor, atop the power crawler, which is being used as a power core for a kerbal based research area. [LOG 22:00:16.999] Loading ship from file: C:/Kerbal Space Program/KSP_Data/../saves/Srilania/Ships/SPH/Auto-Saved Ship.craft [LOG 22:00:17.823] Crawler power unit 4 loaded! [LOG 22:00:20.713] putting ship to ground: 2.801325 [LOG 22:00:20.715] [Crawler power unit 4]: Ready to Launch - waiting to start physics... [LOG 22:00:20.726] [FLIGHT GLOBALS]: Switching To Vessel Crawler power unit 4 ---------------------- [LOG 22:00:20.728] setting new dominant body: Kerbin FlightGlobals.mainBody: Kerbin [LOG 22:00:20.729] Reference Frame: Rotating [LOG 22:00:20.731] stage manager resuming... [LOG 22:00:20.732] Vessel assembly complete! [LOG 22:00:20.733] stage manager starting... [LOG 22:00:20.734] all systems started [ERR 22:00:21.191] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:21.192] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:21.193] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:21.194] WheelCollider requires an attached Rigidbody to function. [WRN 22:00:21.196] [KAS] OnStart(Winch) No connected part found ! [WRN 22:00:21.197] [KAS] OnStart(Winch) HeadState : Locked [WRN 22:00:21.228] [KAS] OnStart(Winch) No connected part found ! [WRN 22:00:21.232] [KAS] OnStart(Winch) HeadState : Locked [LOG 22:00:21.621] [circradiatorKT]: Activated (forced) [ERR 22:00:21.658] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:21.661] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:21.666] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:21.668] WheelCollider requires an attached Rigidbody to function. [LOG 22:00:22.038] [computerCore]: Activated (forced) [LOG 22:00:22.059] [WarpPlugin] Creating Resource Manager for Vessel Crawler power unit 4 (Megajoules) [LOG 22:00:22.060] [Brayton2]: Activated (forced) [LOG 22:00:22.677] [WarpPlugin] Configuring Generator [LOG 22:00:22.698] [WarpPlugin] Creating Resource Manager for Vessel Crawler power unit 4 (ThermalPower) [LOG 22:00:22.700] [WarpPlugin] Creating Resource Manager for Vessel Crawler power unit 4 (WasteHeat) [LOG 22:00:23.093] [NuclearReactor250]: Activated (forced) [LOG 22:00:23.502] [radiator1]: Activated (forced) [LOG 22:00:24.104] [radiator1]: Activated (forced) [LOG 22:00:24.489] [radiator1]: Activated (forced) [LOG 22:00:24.883] [radiator1]: Activated (forced) [LOG 22:00:25.411] [KAS] OnLoad(Core) Loading docked info from save... [LOG 22:00:25.413] [KAS] OnLoad(Winch) Loading winch head info from save... [LOG 22:00:25.414] [KAS] OnLoad(Winch) Loading plug info from save... [LOG 22:00:26.529] [KAS] OnLoad(Core) Loading docked info from save... [LOG 22:00:26.530] [KAS] OnLoad(Winch) Loading winch head info from save... [LOG 22:00:26.532] [KAS] OnLoad(Winch) Loading plug info from save... [LOG 22:00:27.131] [KAS] OnLoad(Core) Loading docked info from save... [LOG 22:00:27.132] [KAS] OnLoad(Winch) Loading winch head info from save... [LOG 22:00:27.133] [KAS] OnLoad(Winch) Loading plug info from save... [LOG 22:00:27.742] [KAS] OnLoad(Core) Loading docked info from save... [LOG 22:00:27.743] [KAS] OnLoad(Winch) Loading winch head info from save... [LOG 22:00:27.744] [KAS] OnLoad(Winch) Loading plug info from save... [LOG 22:00:28.322] [KAS] OnLoad(Core) Loading docked info from save... [LOG 22:00:28.323] [KAS] OnLoad(Winch) Loading winch head info from save... [LOG 22:00:28.324] [KAS] OnLoad(Winch) Loading plug info from save... [LOG 22:00:28.923] [KAS] OnLoad(Core) Loading docked info from save... [LOG 22:00:28.926] [KAS] OnLoad(Winch) Loading winch head info from save... [LOG 22:00:28.928] [KAS] OnLoad(Winch) Loading plug info from save... [LOG 22:00:29.520] [KAS] OnLoad(Core) Loading docked info from save... [LOG 22:00:29.522] [KAS] OnLoad(Winch) Loading winch head info from save... [LOG 22:00:29.523] [KAS] OnLoad(Winch) Loading plug info from save... [LOG 22:00:30.102] [KAS] OnLoad(Core) Loading docked info from save... [LOG 22:00:30.103] [KAS] OnLoad(Winch) Loading winch head info from save... [LOG 22:00:30.104] [KAS] OnLoad(Winch) Loading plug info from save... [LOG 22:00:31.182] [KAS] OnLoad(Core) Loading docked info from save... [LOG 22:00:31.183] [KAS] OnLoad(Winch) Loading winch head info from save... [LOG 22:00:31.184] [KAS] OnLoad(Winch) Loading plug info from save... [LOG 22:00:32.041] [Crawler lab unit 2]: landed - waiting for ground contact to resume physics... [LOG 22:00:32.641] [scienceModule]: Activated (forced) [LOG 22:00:32.642] [scienceModule]: Activated (forced) [WRN 22:00:32.665] [KAS] OnStart(Winch) No connected part found ! [WRN 22:00:32.666] [KAS] OnStart(Winch) HeadState : Locked [LOG 22:00:33.062] [computerCore]: Activated (forced) [ERR 22:00:33.626] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:33.627] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:33.629] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:33.630] WheelCollider requires an attached Rigidbody to function. [LOG 22:00:33.631] [KAS] OnLoad(Core) Re-set docking on Radial connector port [WRN 22:00:33.632] [KAS] DockTo(Core) Parts already docked, nothing more to do [WRN 22:00:33.634] [KAS] OnStart(Winch) No connected part found ! [LOG 22:00:33.635] [KAS] OnStart(Winch) Retrieve part with ID : 2760947801 | From vessel ID : 665a49f4-ce2b-4b47-b9c7-7cbded60ae11 [LOG 22:00:33.636] [KAS] Set head position to : (6.2, -3.5, 0.0) | Rotation : (-0.6, -0.6, 0.6, -0.1) [WRN 22:00:33.639] [KAS] OnStart(Winch) HeadState : PlugDocked [ERR 22:00:34.141] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:34.143] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:34.144] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:34.145] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:35.138] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:35.631] WheelCollider requires an attached Rigidbody to function. [WRN 22:00:35.650] [KAS] OnStart(Winch) No connected part found ! [WRN 22:00:35.652] [KAS] OnStart(Winch) HeadState : Locked [ERR 22:00:35.660] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:35.662] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:36.584] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:36.585] WheelCollider requires an attached Rigidbody to function. [WRN 22:00:36.587] [KAS] OnStart(Winch) No connected part found ! [WRN 22:00:36.588] [KAS] OnStart(Winch) HeadState : Locked [ERR 22:00:36.594] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:36.596] WheelCollider requires an attached Rigidbody to function. [LOG 22:00:37.172] [circradiatorKT]: Activated (forced) [LOG 22:00:37.206] [WarpPlugin] Creating Resource Manager for Vessel Crawler lab unit 2 (Megajoules) [LOG 22:00:37.207] [Brayton2]: Activated (forced) [LOG 22:00:37.591] [WarpPlugin] Configuring Generator [LOG 22:00:37.615] [WarpPlugin] Creating Resource Manager for Vessel Crawler lab unit 2 (ThermalPower) [LOG 22:00:37.616] [WarpPlugin] Creating Resource Manager for Vessel Crawler lab unit 2 (WasteHeat) [LOG 22:00:37.984] [NuclearReactor250]: Activated (forced) [LOG 22:00:38.390] [computerCore]: Activated (forced) [LOG 22:00:38.975] [radiator1]: Activated (forced) [LOG 22:00:39.346] [radiator1]: Activated (forced) [LOG 22:00:39.704] [radiator1]: Activated (forced) [LOG 22:00:40.280] [radiator1]: Activated (forced) [LOG 22:00:40.282] [KAS] OnLoad(Core) Re-set docking on Radial connector port [WRN 22:00:40.283] [KAS] DockTo(Core) Parts already docked, nothing more to do [WRN 22:00:40.284] [KAS] OnStart(Winch) No connected part found ! [LOG 22:00:40.286] [KAS] OnStart(Winch) Retrieve part with ID : 2975311279 | From vessel ID : 665a49f4-ce2b-4b47-b9c7-7cbded60ae11 [LOG 22:00:40.288] [KAS] Set head position to : (0.0, -2.9, -0.2) | Rotation : (-0.7, -0.1, 0.1, 0.7) [WRN 22:00:40.290] [KAS] OnStart(Winch) HeadState : PlugDocked [ERR 22:00:40.367] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:40.368] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:40.369] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:40.371] WheelCollider requires an attached Rigidbody to function. [LOG 22:00:40.411] [scienceModule]: Activated (forced) [LOG 22:00:40.412] [scienceModule]: Activated (forced) [WRN 22:00:40.435] [KAS] OnStart(Winch) No connected part found ! [WRN 22:00:40.436] [KAS] OnStart(Winch) HeadState : Locked [LOG 22:00:40.836] [computerCore]: Activated (forced) [ERR 22:00:40.865] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:40.867] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:40.868] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:40.869] WheelCollider requires an attached Rigidbody to function. [LOG 22:00:40.870] [KAS] OnLoad(Core) Re-set docking on Radial connector port [WRN 22:00:40.871] [KAS] DockTo(Core) Parts already docked, nothing more to do [WRN 22:00:40.873] [KAS] OnStart(Winch) No connected part found ! [LOG 22:00:40.874] [KAS] OnStart(Winch) Retrieve part with ID : 2531390824 | From vessel ID : 665a49f4-ce2b-4b47-b9c7-7cbded60ae11 [LOG 22:00:40.875] [KAS] Set head position to : (1.0, -21.1, 0.7) | Rotation : (-0.5, -0.1, 0.1, 0.9) [WRN 22:00:40.877] [KAS] OnStart(Winch) HeadState : PlugDocked [ERR 22:00:41.230] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:41.231] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:41.232] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:41.233] WheelCollider requires an attached Rigidbody to function. [LOG 22:00:41.411] [scienceModule]: Activated (forced) [LOG 22:00:41.412] [scienceModule]: Activated (forced) [WRN 22:00:41.432] [KAS] OnStart(Winch) No connected part found ! [WRN 22:00:41.434] [KAS] OnStart(Winch) HeadState : Locked [LOG 22:00:41.829] [computerCore]: Activated (forced) [ERR 22:00:41.998] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:41.999] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:42.001] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:42.002] WheelCollider requires an attached Rigidbody to function. [LOG 22:00:42.004] [KAS] OnLoad(Core) Re-set docking on Radial connector port [WRN 22:00:42.007] [KAS] DockTo(Core) Parts already docked, nothing more to do [WRN 22:00:42.009] [KAS] OnStart(Winch) No connected part found ! [LOG 22:00:42.010] [KAS] OnStart(Winch) Retrieve part with ID : 3015752540 | From vessel ID : 665a49f4-ce2b-4b47-b9c7-7cbded60ae11 [LOG 22:00:42.012] [KAS] Set head position to : (2.5, -5.6, 0.7) | Rotation : (0.0, 0.5, -0.5, -0.7) [WRN 22:00:42.014] [KAS] OnStart(Winch) HeadState : PlugDocked [ERR 22:00:42.373] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:42.375] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:42.376] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:42.377] WheelCollider requires an attached Rigidbody to function. [LOG 22:00:42.547] [scienceModule]: Activated (forced) [LOG 22:00:42.548] [scienceModule]: Activated (forced) [WRN 22:00:42.572] [KAS] OnStart(Winch) No connected part found ! [WRN 22:00:42.573] [KAS] OnStart(Winch) HeadState : Locked [LOG 22:00:43.154] [computerCore]: Activated (forced) [ERR 22:00:43.315] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:43.316] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:43.317] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:43.318] WheelCollider requires an attached Rigidbody to function. [LOG 22:00:43.318] [KAS] OnLoad(Core) Re-set docking on Radial connector port [WRN 22:00:43.320] [KAS] DockTo(Core) Parts already docked, nothing more to do [WRN 22:00:43.321] [KAS] OnStart(Winch) No connected part found ! [LOG 22:00:43.323] [KAS] OnStart(Winch) Retrieve part with ID : 2177811128 | From vessel ID : 665a49f4-ce2b-4b47-b9c7-7cbded60ae11 [LOG 22:00:43.325] [KAS] Set head position to : (5.1, -6.4, 0.8) | Rotation : (-0.4, -0.4, 0.4, 0.8) [WRN 22:00:43.327] [KAS] OnStart(Winch) HeadState : PlugDocked [ERR 22:00:43.412] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:43.413] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:43.414] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:43.416] WheelCollider requires an attached Rigidbody to function. [LOG 22:00:43.453] [scienceModule]: Activated (forced) [LOG 22:00:43.454] [scienceModule]: Activated (forced) [WRN 22:00:43.480] [KAS] OnStart(Winch) No connected part found ! [WRN 22:00:43.482] [KAS] OnStart(Winch) HeadState : Locked [LOG 22:00:43.880] [computerCore]: Activated (forced) [ERR 22:00:43.908] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:43.909] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:43.910] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:43.911] WheelCollider requires an attached Rigidbody to function. [LOG 22:00:43.912] [KAS] OnLoad(Core) Re-set docking on Radial connector port [WRN 22:00:43.913] [KAS] DockTo(Core) Parts already docked, nothing more to do [WRN 22:00:43.916] [KAS] OnStart(Winch) No connected part found ! [LOG 22:00:43.917] [KAS] OnStart(Winch) Retrieve part with ID : 3326275195 | From vessel ID : 665a49f4-ce2b-4b47-b9c7-7cbded60ae11 [LOG 22:00:43.919] [KAS] Set head position to : (-4.9, -8.8, -0.3) | Rotation : (-0.7, 0.3, -0.3, 0.6) [WRN 22:00:43.922] [KAS] OnStart(Winch) HeadState : PlugDocked [ERR 22:00:44.200] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:44.202] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:44.203] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:44.204] WheelCollider requires an attached Rigidbody to function. [LOG 22:00:44.338] [scienceModule]: Activated (forced) [LOG 22:00:44.339] [scienceModule]: Activated (forced) [WRN 22:00:44.361] [KAS] OnStart(Winch) No connected part found ! [WRN 22:00:44.362] [KAS] OnStart(Winch) HeadState : Locked [LOG 22:00:44.786] [computerCore]: Activated (forced) [ERR 22:00:44.908] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:44.909] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:44.910] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:44.911] WheelCollider requires an attached Rigidbody to function. [LOG 22:00:44.914] [KAS] OnLoad(Core) Re-set docking on Radial connector port [WRN 22:00:44.916] [KAS] DockTo(Core) Parts already docked, nothing more to do [WRN 22:00:44.920] [KAS] OnStart(Winch) No connected part found ! [LOG 22:00:44.921] [KAS] OnStart(Winch) Retrieve part with ID : 1588889109 | From vessel ID : 665a49f4-ce2b-4b47-b9c7-7cbded60ae11 [LOG 22:00:44.922] [KAS] Set head position to : (-0.2, -5.4, -0.3) | Rotation : (-0.7, 0.0, 0.0, 0.7) [WRN 22:00:44.925] [KAS] OnStart(Winch) HeadState : PlugDocked [ERR 22:00:45.214] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:45.215] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:45.216] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:45.217] WheelCollider requires an attached Rigidbody to function. [LOG 22:00:45.338] [scienceModule]: Activated (forced) [LOG 22:00:45.340] [scienceModule]: Activated (forced) [WRN 22:00:45.365] [KAS] OnStart(Winch) No connected part found ! [WRN 22:00:45.367] [KAS] OnStart(Winch) HeadState : Locked [LOG 22:00:45.977] [computerCore]: Activated (forced) [ERR 22:00:46.087] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:46.088] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:46.089] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:46.090] WheelCollider requires an attached Rigidbody to function. [LOG 22:00:46.092] [KAS] OnLoad(Core) Re-set docking on Radial connector port [WRN 22:00:46.094] [KAS] DockTo(Core) Parts already docked, nothing more to do [WRN 22:00:46.095] [KAS] OnStart(Winch) No connected part found ! [LOG 22:00:46.096] [KAS] OnStart(Winch) Retrieve part with ID : 2391181699 | From vessel ID : 665a49f4-ce2b-4b47-b9c7-7cbded60ae11 [LOG 22:00:46.098] [KAS] Set head position to : (-1.8, 0.1, -3.4) | Rotation : (-0.1, 0.3, -0.3, 0.9) [WRN 22:00:46.100] [KAS] OnStart(Winch) HeadState : PlugDocked [ERR 22:00:46.280] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:46.287] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:46.302] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:46.304] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:46.391] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:46.393] WheelCollider requires an attached Rigidbody to function. [WRN 22:00:46.394] [KAS] OnStart(Winch) No connected part found ! [WRN 22:00:46.395] [KAS] OnStart(Winch) HeadState : Locked [ERR 22:00:46.400] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:46.402] WheelCollider requires an attached Rigidbody to function. [LOG 22:00:46.793] [circradiatorKT]: Activated (forced) [LOG 22:00:47.228] [computerCore]: Activated (forced) [LOG 22:00:47.253] [Brayton2]: Activated (forced) [LOG 22:00:47.840] [WarpPlugin] Configuring Generator [LOG 22:00:48.224] [NuclearReactor250]: Activated (forced) [LOG 22:00:48.622] [radiator1]: Activated (forced) [LOG 22:00:48.985] [radiator1]: Activated (forced) [LOG 22:00:49.582] [radiator1]: Activated (forced) [LOG 22:00:49.966] [radiator1]: Activated (forced) [LOG 22:00:49.967] [KAS] OnLoad(Core) Re-set docking on Radial connector port [WRN 22:00:49.969] [KAS] DockTo(Core) Parts already docked, nothing more to do [WRN 22:00:49.971] [KAS] OnStart(Winch) No connected part found ! [LOG 22:00:49.972] [KAS] OnStart(Winch) Retrieve part with ID : 2338000498 | From vessel ID : 665a49f4-ce2b-4b47-b9c7-7cbded60ae11 [LOG 22:00:49.974] [KAS] Set head position to : (0.9, -0.2, -7.0) | Rotation : (0.5, 0.0, 0.8, 0.0) [WRN 22:00:49.976] [KAS] OnStart(Winch) HeadState : PlugDocked [ERR 22:00:50.134] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:50.144] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:50.166] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:50.172] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:50.261] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:50.262] WheelCollider requires an attached Rigidbody to function. [WRN 22:00:50.263] [KAS] OnStart(Winch) No connected part found ! [WRN 22:00:50.264] [KAS] OnStart(Winch) HeadState : Locked [ERR 22:00:50.272] WheelCollider requires an attached Rigidbody to function. [ERR 22:00:50.274] WheelCollider requires an attached Rigidbody to function. [LOG 22:00:50.646] [circradiatorKT]: Activated (forced) [LOG 22:00:51.253] [computerCore]: Activated (forced) [LOG 22:00:51.276] [Brayton2]: Activated (forced) [LOG 22:00:51.644] [WarpPlugin] Configuring Generator [LOG 22:00:52.040] [NuclearReactor250]: Activated (forced) [LOG 22:00:52.636] [radiator1]: Activated (forced) [LOG 22:00:53.028] [radiator1]: Activated (forced) [LOG 22:00:53.426] [radiator1]: Activated (forced) [LOG 22:00:54.023] [radiator1]: Activated (forced) [WRN 22:00:54.798] File 'C:/Kerbal Space Program/KSP_Data/../saves/Srilania/kethane.cfg' does not exist [WRN 22:00:54.992] Kethane deposits loaded (191ms) [ERR 22:01:01.926] NpScene::createJoint: desc.isValid() fails! [LOG 22:01:01.929] [PlanetariumCamera]: Focus: Crawler power unit 4 [LOG 22:01:01.946] [scienceModule]: Activated (forced) [LOG 22:01:01.951] [computerCore]: Activated (forced) [ERR 22:01:01.954] NpScene::createJoint: desc.isValid() fails! [ERR 22:01:01.959] NpScene::createJoint: desc.isValid() fails! [LOG 22:01:01.960] [circradiatorKT]: Activated (forced) [LOG 22:01:01.961] [Brayton2]: Activated (forced) [LOG 22:01:01.962] [NuclearReactor250]: Activated (forced) [LOG 22:01:01.964] [computerCore]: Activated (forced) [LOG 22:01:01.965] [radiator1]: Activated (forced) [LOG 22:01:01.966] [radiator1]: Activated (forced) [LOG 22:01:01.968] [radiator1]: Activated (forced) [LOG 22:01:01.969] [radiator1]: Activated (forced) [LOG 22:01:01.974] [scienceModule]: Activated (forced) [LOG 22:01:01.976] [computerCore]: Activated (forced) [LOG 22:01:01.980] [scienceModule]: Activated (forced) [LOG 22:01:01.982] [computerCore]: Activated (forced) [LOG 22:01:01.985] [scienceModule]: Activated (forced) [LOG 22:01:01.987] [computerCore]: Activated (forced) [LOG 22:01:01.990] [scienceModule]: Activated (forced) [LOG 22:01:01.994] [computerCore]: Activated (forced) [LOG 22:01:01.998] [scienceModule]: Activated (forced) [LOG 22:01:02.000] [computerCore]: Activated (forced) [LOG 22:01:02.003] [scienceModule]: Activated (forced) [LOG 22:01:02.005] [computerCore]: Activated (forced) [ERR 22:01:02.008] NpScene::createJoint: desc.isValid() fails! [LOG 22:01:02.013] [circradiatorKT]: Activated (forced) [LOG 22:01:02.015] [computerCore]: Activated (forced) [LOG 22:01:02.016] [Brayton2]: Activated (forced) [LOG 22:01:02.017] [NuclearReactor250]: Activated (forced) [LOG 22:01:02.019] [radiator1]: Activated (forced) [LOG 22:01:02.020] [radiator1]: Activated (forced) [LOG 22:01:02.022] [radiator1]: Activated (forced) [LOG 22:01:02.025] [radiator1]: Activated (forced) [ERR 22:01:02.027] NpScene::createJoint: desc.isValid() fails! [LOG 22:01:02.029] [circradiatorKT]: Activated (forced) [LOG 22:01:02.031] [computerCore]: Activated (forced) [LOG 22:01:02.033] [Brayton2]: Activated (forced) [LOG 22:01:02.034] [NuclearReactor250]: Activated (forced) [LOG 22:01:02.036] [radiator1]: Activated (forced) [LOG 22:01:02.037] [radiator1]: Activated (forced) [LOG 22:01:02.041] [radiator1]: Activated (forced) [LOG 22:01:02.042] [radiator1]: Activated (forced) [LOG 22:01:04.844] [KAS] OnSave(Core) Docked joint detected, saving info... [LOG 22:01:04.846] [KAS] OnSave(Winch) Winch head deployed, saving info... [LOG 22:01:04.857] [KAS] OnSave(Core) Docked joint detected, saving info... [LOG 22:01:04.858] [KAS] OnSave(Winch) Winch head deployed, saving info... [LOG 22:01:04.868] [KAS] OnSave(Core) Docked joint detected, saving info... [LOG 22:01:04.869] [KAS] OnSave(Winch) Winch head deployed, saving info... [LOG 22:01:04.880] [KAS] OnSave(Core) Docked joint detected, saving info... [LOG 22:01:04.882] [KAS] OnSave(Winch) Winch head deployed, saving info... [LOG 22:01:04.891] [KAS] OnSave(Core) Docked joint detected, saving info... [LOG 22:01:04.895] [KAS] OnSave(Winch) Winch head deployed, saving info... [LOG 22:01:04.905] [KAS] OnSave(Core) Docked joint detected, saving info... [LOG 22:01:04.906] [KAS] OnSave(Winch) Winch head deployed, saving info... [LOG 22:01:04.915] [KAS] OnSave(Core) Docked joint detected, saving info... [LOG 22:01:04.917] [KAS] OnSave(Winch) Winch head deployed, saving info... [LOG 22:01:04.927] [KAS] OnSave(Core) Docked joint detected, saving info...

Well, checking, but so far, the message I've gotten once I add the item is [Error]: NpScene::createJoint: desc.isValid() fails! in debug. As far as pumping fuels around, none of the fuels pump in or out or around, making a right proper mess of trying to get fuel INTO the reactor, or actinites out. addingthe entry cost field into the .cfg field, to see if that might fix, but I'm doubting that's the issue Edit: Nope, adding an entry cost did not fix the issue.

I can't seem to get my reprocessing center to rez. I added to the .cfg file the following to get it to pop up in the tech tree. TechRequired = electronics It pops up, allows me to build in the SPH or VAB, then when FLY is hit, it takes a lil bit, then poof, the reprocessor's gone, and when revertingro killing the flight and going back to the assembly you find......NOTHING where you'd put the reprocessing center. Also, it seems the labs can't do anything, and the reactors make actinates only, no DU4, like it used to.

I still miss the kethane parts being able to scan and drill up the ore, as the augers I have NEVER been able to get to work right, and the ore scanner now in the pack is a nightmare size, as well as break off with a sneeze

Are we just gonna get teasers, or we going to see some new stuff available for playtime soon?

A silly question, but instead of doing all that extra work, could you not simply use the Kethane plugin, since it has a setup for adding new resources to scan for?

The issue is, it takes 150 tons of uranium ore, to make 35 tons of useable uranium fuel and 115 tons of "depleted uranium" in order to create a 1GW year of power. The same can be done with one ton of thorium ore, which, is as common as lead, and is found in rare earth ores. Since we need rare earth ores for hard drives, electronics, wind turbines, electric motors, and many more of our modern things, this thorium right now is nothing more than a waste byproduct, with hundreds of thousands of tons already ready to just dig out of pits they were reburied into, and used for a reactor. Add to it the wastes are a lot shorter lived than what's in a Light Water uranium reactor, and the costs are less to construct and operate? makes more sense now to use them.

The main advantages to the LFTR reactors is that thorium is a lot more common than uranium, it takes a lot less ore to run a reactor, (1 ton compared to 150 tons of uranium ore) uses less fuel to generate the same ammount of electricity (1 ton of thorium compared to 35 tons of uranium) and the LFTR reactors are pretty foolproof, using less than 1 atmosphere of operating pressure, thermal breeding creating less inherant neutron radiation than fast breeders, liquid fuel can expand as it overheats, slowing reaction and preventing meltdown, and the freeze plug allows for dumping the fuel into a 100% passively cooled tank, preventing a chernobyl or fukushima type meltdown. Reason we're not using it? There's too much money to be made with the current system. That's the ONLY reason.

The reasons for tetraflouride is because it requires a lower operation tempurature, however seems to require high pressure refining, which is not very doable in a small power plant in space. Hexaflouride, uses simple electrochemical processing, but requires a higher operation temperature, but is better for a small portable generator, such as for a spaceship or space station.

Not quite. If instead of Thorium tetraflouride and Uranium tetraflouride, use thorium and uranium hexaflouride, run it as a molten salt instead of a solid, and have a small reprocessing/storage tank, and extract from the molten salt as soon as the Thorium 233 beta decays into Americium 233, which is a very simple chemical reprocessing, it will beta decay fairly quickly into protactinium, and held in a storage tank, it can then sit till it beta decays into Uranium 233, where another simple trickle reprocessing can remake it into uranium hexaflouride, and pumped back into the reactor to use as fuel. Also, one of the byproducts from the thorium cycle is the plutonium that is not very useable for weapons, but quite useable for RTG's

ok. that took care of that issue, though sad, since a nuke powered prop driven science airship is easier than trying to ape some wheels on and drive it, or rocket it to a landing point without pancaking.

I've done more testing. Everything is fine with KW and B9, both of which are using the low rez texture packs. The Hooligan's Airship mod is also cleared, as I tested with just envelopes without any propellers. However, it's unleashing the kraken when adding the firespitter's propellers. Since the propellers I was using uses electricity to produce thrust, it was a logical idea to make an airship with electric props that could just keep trucking for days.

Not sure which file that is, but it's not crashing, it's just screwing up, and requiring me to close out to get it to clear the issue. The plugins being used are: B9 Aerospace EL Launchpads (doesn't seem to be integrated into the IS tree stuff) Firespitter Hexcans Hooligan Labs Airships mods KAS (again, doesn't seeem to be in the tree) Spherical Tanks Kethane KW Rocktry Mechjeb 2 NearFuture Resgen The issue does seem to crop up so far when adding Hooligan airship envelopes so I can move the lab around the surface. Will test using some other propulsion method, since that might be causing the issue

I keep having an issue. When I build anything with the science station, the screen goes black, I am shot to -666666 m high, and the screen graphics go wonko. Once that happens, I have to literally close down and restart.

having a hard time finding the modulemanager, since it's being a right pain in the tookus and isn't popping up on the spaceport search