Jump to content

[1.12.x] Near Future Technologies (September 6)


Nertea

Recommended Posts

4 hours ago, thomash said:

Thanks guys.  Since there is no forum link on the Spacedock download page and the discussion page that I originally found was closed last week, I figured I'd come here.  I think I've found the right page now. 

I believe the release thread is linked in both the first and the last post of the WIP thread. Glad you've found the correct place though. 

1 hour ago, juanml82 said:

I was trying to pick up NFP engines for nuclear electric ships yesterday and I've finally decided to make a comparison spreadsheet: basically, how much punch you can get for every given nuclear reactor. So instead of trying different combinations in the VAB and picking up the electric engines from a list in the VAB also filtered to include the cryogenic or monoprop ones (filter extensions/NFT category), I can just go straight to the engines I want. This spreadsheet has the max amount of engines you can fully power with each reactor, how much vacuum thrust you get with those engines and the reactor+radiators+engines total TWR (specially useful for nuclear-electric landers, and pretty much the reason I made the spreadsheet), plus of course the ISP. A few caveats:

I'm comparing the engines assembled with each reactor, but only if the particular reactor can power the engine at full throttle. In other words, this comparison is for nuclear electric ships where you just toggle the reactor & radiators on, point towards the maneuver node and press Z. No solar panels for additional power, no capacitors, no trickle charging batteries. For instance, the GW3 Triplet (100 EC/s) could be paired with the Kerbopower reactor (60 EC/s) and either run at 60% throttle or capacitors could be added to provide the 40 remaining EC/s for shorter burns. That's not included, the GW3 doesn't show up in the Kerbopower comparison at all (on second thoughts, I should have included either partial throttle or a TWR calculation with the mass of enough capacitors for a 10 seconds burn).

I've also added the stock Dawn and the MK2 Expansion ion engine to the spreadsheet

I've included the nuclear reactors from KPBS and MK2 expansion, but not the ones from MKS, as I don't currently have it installed. If someone wants to add them, it's just a matter of copying the existing template and replacing the weight and EC production with those of the MKS reactors (plus whatever radiators are needed to cool them)

For the Kerbopower, Garnet and the KBPS and MK2-E reactors, I've picked the stock radiators to cool them. The KBPS and maybe the MK2-E reactor should probably get better TWR numbers with the Heat Control mod radiators, as they do heat a lot (specially the KBPS radiator). For the heavier NFE reactors, I've used non-graphite radiators from Heat Control, since they produce a lot of heat. I've picked the non-graphite because they are earlier in the tech tree, so the TWR numbers would work best for people still unlocking the tech tree.

The Inductor, Scintillator and Repulsor all have variable isp: by giving them extra power, their isp can be increased. I've only included the base values in this spreadsheet

But for the Vasimir engines I included three values: one at 0% efficiency (more thrust, less isp), one at 50% and another at 100% (less thrust, more isp), and calculated all three values for both argon and xenon modes.

I've added two variants of FL-T100 + fuel cell array combos: one with one fuel cell, the other with four fuel cell. They don't really hold their own against nuclear reactors (and they shouldn't)

I guess that with the mass, TWR and the isp values someone could add them to any of the optimal rocket calculations, but I don't know which are the equations used for that, so that's not included

Finally, here's the spreadsheet

https://docs.google.com/spreadsheets/d/1AFlhwNe4LCb53UXWUNCosT0biLrFmLQm-J5pAa07jhE/edit?usp=sharing

Nice work! Also worth mentioning that the total performance of any reactor is directly related to the radiator technology type, with better technology providing better heat removed per ton. The stock radiators are the worst, the 'High Temperature' Heat Control radiators are in the middle and the Graphite are the best. In addition, there is scaling with reactor size and tech level such that larger reactors get better power generated/heat generated ratios. I've been trying to write up some better user stuff in the wiki so you might find that helpful.

Link to comment
Share on other sites

Hey, just want to say thank you for all of your mods! They have been staples of my games for years, and bring incredible depth and fun to the game. It's been a blast seeing how your skill has grown over all this time!

Link to comment
Share on other sites

On 4/5/2019 at 7:28 PM, Nertea said:

@Boamere, @Einarr, I had a look at the model last night, the transforms are all centered around the part origin. Can you provide more detail (the screenshot linked is super low res). 

Here's a higher res image

Spoiler

eXMas64.png

I re-installed the mod manually and it's still occuring, only with the two turboprops as well.

Something strange I found is that if I set reverse thrust, the thrust is centred again but only on that engine, the other one doesn't show.

Edited by Boamere
Link to comment
Share on other sites

6 hours ago, Boamere said:

Here's a higher res image

  Hide contents

eXMas64.png

I re-installed the mod manually and it's still occuring, only with the two turboprops as well.

Something strange I found is that if I set reverse thrust, the thrust is centred again but only on that engine, the other one doesn't show.

Interesting, there might be a bug with KerbalActuators handling multiple thrustTransforms then. I'll further investigate when I have time.

Edited by Nertea
Link to comment
Share on other sites

@Einarr, @Boamere, I confirmed that KerbalActuators needs some fixes to support the multiple ThrustTransforms used on these parts. How this went undiscovered for so long (probably almost 18 months) I'm not entirely sure. I guess nobody really uses these parts :P. Don't have a full ETA on the fix but it's not very hard to do, just needs some testing. 

Link to comment
Share on other sites

Let me also toss in some more progress updates. I've kinda been all over the place in what I'm working on because frankly, redos are not exciting. However, progress is being made.

In NF Construction, progress goes slowly - updating all the fuel tanks in the trusses to match with the changes in NFP, and getting around to prototyping new gold foil tanks for LH2, which will also affect work on CryoTanks soon. 

screenshot3.png

These are pretty nice because they are 90% procedural and don't require hand-drawing of foil normals like the ones in Restock. They suffer in other ways but this seems like a good direction to take. 

In NF Solar, I've made good progress on the redone Trio (and by extension, Solo):

panels.png

panels.png

The new extension mechanism is more realistic, compact, and mechanically detailed. It should be more obvious these are ISS-derived panels now.

In addition, a new fairly large blanket array, which will likely replace the OKEB-125 based on the MegaROSA array concepts. Pain in the butt to animate though. I'd intended this tech to sit on a new version of a super-large array in the 250kW range, but that might get nixed as it was very frustrating to work on. 

megaRosa2.png

megaRosa1.png

Lastly, finished up the two last super-advanced rigid arrays, they're the only ones in the mod that will retain the Concentrator moniker and will have cells probably based on the SCARLET array or something similar. 

two.png

Starting the unwrap process for all these now, which is going to be nontrivial. 

Edited by Nertea
Link to comment
Share on other sites

8 hours ago, Nertea said:

@Einarr, @Boamere, I confirmed that KerbalActuators needs some fixes to support the multiple ThrustTransforms used on these parts. How this went undiscovered for so long (probably almost 18 months) I'm not entirely sure. I guess nobody really uses these parts :P. Don't have a full ETA on the fix but it's not very hard to do, just needs some testing. 

Hahaha wow, that is a long time. 

Thanks for your hard work dude, looking forward to all these mod updates; definitely my favourite selection of mods ever

Link to comment
Share on other sites

Some points on 1.7 updates for the suite:

  • NF Propulsion will get updated early next week once I have had time to verify functionality
  • NF Electrical will get updated early next week once I have had time to verify functionality
  • NF Construction will NOT get updated until the renovations are complete (eta ~ 2-3 weeks)
  • NF Solar will NOT get updated until the renovations are complete (eta 3-4 weeks)
  • NF Spacecraft will get updated early next week once I have had time to verify functionality
  • NF Launch Vehicles will get updated early next week once I have had time to verify functionality (renovations are too far out to wait for)
  • NF Aeronautics will get updated in lockstep with the next Kerbal Actuators update (eta unknown)
Link to comment
Share on other sites

2 minutes ago, Nertea said:

Some points on 1.7 updates for the suite:

  • NF Propulsion will get updated early next week once I have had time to verify functionality
  • NF Electrical will get updated early next week once I have had time to verify functionality
  • NF Construction will NOT get updated until the renovations are complete (eta ~ 2-3 weeks)
  • NF Solar will NOT get updated until the renovations are complete (eta 3-4 weeks)
  • NF Spacecraft will get updated early next week once I have had time to verify functionality
  • NF Launch Vehicles will get updated early next week once I have had time to verify functionality (renovations are too far out to wait for)
  • NF Aeronautics will get updated in lockstep with the next Kerbal Actuators update (eta unknown)

Thanks for taking the time to let everyone know. Your continued efforts to maintain and improve this suite of mods is greatly appreciated and amazing as always. Also, LOVE the procedural tank foil - those gold tanks are looking incredible.

Link to comment
Share on other sites

@Nertea I have a sort of silly request, but -- could you possibly add engine ThrustTransforms to the bottom thrusters in the RQ5 Heavy RCS Blocks to turn them into RCS/OMS (similar to the SpaceY OMS)?
I'm quite fond of their shape (I did modify the texture quite a bit) and use them in a reusable capsule concept (this is heavily modded xD), but the SpaceY shape wouldn't do it here:
rU35yLq.jpg
I know I can "Fore by Throttle" but it makes for awkward dv calculations considering they're my main "engines".

Edited by Zah
Link to comment
Share on other sites

On 4/8/2019 at 1:16 PM, Nertea said:

Let me also toss in some more progress updates. I've kinda been all over the place in what I'm working on because frankly, redos are not exciting. However, progress is being made.

In NF Construction, progress goes slowly - updating all the fuel tanks in the trusses to match with the changes in NFP, and getting around to prototyping new gold foil tanks for LH2, which will also affect work on CryoTanks soon. 

screenshot3.png

These are pretty nice because they are 90% procedural and don't require hand-drawing of foil normals like the ones in Restock. They suffer in other ways but this seems like a good direction to take. 

In NF Solar, I've made good progress on the redone Trio (and by extension, Solo):

panels.png

panels.png

The new extension mechanism is more realistic, compact, and mechanically detailed. It should be more obvious these are ISS-derived panels now.

In addition, a new fairly large blanket array, which will likely replace the OKEB-125 based on the MegaROSA array concepts. Pain in the butt to animate though. I'd intended this tech to sit on a new version of a super-large array in the 250kW range, but that might get nixed as it was very frustrating to work on. 

megaRosa2.png

megaRosa1.png

Lastly, finished up the two last super-advanced rigid arrays, they're the only ones in the mod that will retain the Concentrator moniker and will have cells probably based on the SCARLET array or something similar. 

two.png

Starting the unwrap process for all these now, which is going to be nontrivial. 

So cool!

Link to comment
Share on other sites

On 4/12/2019 at 7:41 PM, Zah said:

@Nertea I have a sort of silly request, but -- could you possibly add engine ThrustTransforms to the bottom thrusters in the RQ5 Heavy RCS Blocks to turn them into RCS/OMS (similar to the SpaceY OMS)?
I'm quite fond of their shape (I did modify the texture quite a bit) and use them in a reusable capsule concept (this is heavily modded xD), but the SpaceY shape wouldn't do it here:

I know I can "Fore by Throttle" but it makes for awkward dv calculations considering they're my main "engines".

I can add the appropriate transforms in the next update, but I won't be adding actual engine modules.

5 hours ago, Barzon Kerman said:

Would it be possible for the small circular panel to be made to fit a 3.125m Orion capsule?

I don't do requests for parts unless I'm already planning them. That being said, there's already a small circular panel, what's wrong with that?

Link to comment
Share on other sites

I think he wants a size adjustment on the existing one. IIRC, it looks good on a 2.5m Orion, but for 3.125m it's a bit too small. I wouldn't mind it being scaled up, but I don't have a problem with its current size, either.

Link to comment
Share on other sites

Yeah, thats what I was meaning. Could it even just be a variant, which is just a larger version of the small one? Because if sized up to fit a 3.125m Orion, it sticks out really far, and ofcouse if I clip it in, they wont be able to deploy?

Link to comment
Share on other sites

13 minutes ago, Barzon Kerman said:

Yeah, thats what I was meaning. Could it even just be a variant, which is just a larger version of the small one? Because if sized up to fit a 3.125m Orion, it sticks out really far, and ofcouse if I clip it in, they wont be able to deploy?

Does Tweakscale not work?

Link to comment
Share on other sites

2 hours ago, Nertea said:

I can add the appropriate transforms in the next update, but I won't be adding actual engine modules.

Sweet! I can do the rest myself (:
Your mods are the backbone of my space program, thanks so much! :)

Link to comment
Share on other sites

4 hours ago, Barzon Kerman said:

Yeah, thats what I was meaning. Could it even just be a variant, which is just a larger version of the small one? Because if sized up to fit a 3.125m Orion, it sticks out really far, and ofcouse if I clip it in, they wont be able to deploy?

Nah that's a lot of work for basically no gain.

Well I was going to deploy some mods, but turns out CurseForge hasn't stuck the 1.7 tag on yet, breaking the ability to deploy there for me. Will have to wait a bit for me to either fix my stuff to handle that or for them to edit a tiny metadata field. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...