Gremillion Posted August 22, 2019 Share Posted August 22, 2019 (edited) 10 minutes ago, Starwaster said: @Gremillion no, this is what you want: https://github.com/shadowmage45/SSTULabs/releases/tag/0.11.49.161 Whoooooooooooooops. I thought that was for 1.7 only. Edited August 22, 2019 by Gremillion Quote Link to comment Share on other sites More sharing options...
Gremillion Posted August 22, 2019 Share Posted August 22, 2019 Still getting negatives, but it seems to be only with very small tanks. The launchers I am using seem to be ok, at least. Quote Link to comment Share on other sites More sharing options...
Starwaster Posted August 22, 2019 Share Posted August 22, 2019 1 hour ago, Gremillion said: Still getting negatives, but it seems to be only with very small tanks. The launchers I am using seem to be ok, at least. What about the normal MFT-A tank? Lander tank? Quote Link to comment Share on other sites More sharing options...
Gremillion Posted August 22, 2019 Share Posted August 22, 2019 11 minutes ago, Starwaster said: What about the normal MFT-A tank? Lander tank? This version of SSTU doesn't have the MFT-As, they're broken into I, II, etc types. Here's an MFTIII showing negs: Quote Link to comment Share on other sites More sharing options...
Starwaster Posted August 22, 2019 Share Posted August 22, 2019 @Gremillion put the patch back in that I posted a few posts back: The problem is: that tank is a clone of the MFT-A and it's being cloned BEFORE SSTU patches any of the MFT parts Quote Link to comment Share on other sites More sharing options...
Gremillion Posted August 22, 2019 Share Posted August 22, 2019 1 minute ago, Starwaster said: @Gremillion put the patch back in that I posted a few posts back: The problem is: that tank is a clone of the MFT-A and it's being cloned BEFORE SSTU patches any of the MFT parts That patch is already there. It's in zzzTweaks. Should I move it to ___Tweaks so it loads first? Quote Link to comment Share on other sites More sharing options...
Starwaster Posted August 22, 2019 Share Posted August 22, 2019 4 minutes ago, Gremillion said: That patch is already there. It's in zzzTweaks. Should I move it to ___Tweaks so it loads first? No it has to run last or at least after all that cloning. (that's why I put :FINAL in there so it runs last no matter what) Well crap then I have no idea. All I know is the SSTU RF compatibility patch runs in :FOR[SSTU] and the cloning of those parts happens in :FOR[RealismOverhaul] so the cloning takes precedence over the patching. SSTU ends up patching only its own parts. I'll see about getting someone to fix the timing of the RO patch or to do the patching oureselves Quote Link to comment Share on other sites More sharing options...
Gremillion Posted August 22, 2019 Share Posted August 22, 2019 1 minute ago, Starwaster said: No it has to run last or at least after all that cloning. (that's why I put :FINAL in there so it runs last no matter what) Well crap then I have no idea. All I know is the SSTU RF compatibility patch runs in :FOR[SSTU] and the cloning of those parts happens in :FOR[RealismOverhaul] so the cloning takes precedence over the patching. SSTU ends up patching only its own parts. I'll see about getting someone to fix the timing of the RO patch or to do the patching oureselves For now, it works. I am not using tanks much smaller than 2.5m and they're positive at that size. Also, I am contemplating the possibility that I just screwed up entirely during install. Tomorrow I may give it a go from fresh, see if that fixes anything. Quote Link to comment Share on other sites More sharing options...
Rob K Posted August 22, 2019 Share Posted August 22, 2019 @Starwaster I just tried this "patch" you posted for SSTU, and even tough it kinda fixes the negative mass issue for tanks, it doesn't fix the SSTU issue with pods losing added recources once you launch them. Right now the Orion capsules for instance do not contain TAC LS recources, you can add them in editor and all the numbers seem to check out, but once you launch you are left with the default recources. This is both in sandbox and career modes. An issue was posted on github a few days back adressing this, and the answer was that it should work if you have the correct version of SSTU against which the RO configs were written. Is there any way to see which version this was??? I scoured both the SSTU config files on github and in my game directory and simply cannot find any annotation or version number. Would it be a good idea to have the mod version used added to the beginning of the config files to prevent version mismatch issues? And is there ANY version of SSTU that creates usable capsules under the current RO version? I'm using the 12.7.2 version of RO and the rp1 master branch. Quote Link to comment Share on other sites More sharing options...
Starwaster Posted August 22, 2019 Share Posted August 22, 2019 @RobK I’m not surprised that it didn’t fix any issues with parts losing resources. I don’t know what I might have said to make anyone think it would... Quote Link to comment Share on other sites More sharing options...
Starwaster Posted August 22, 2019 Share Posted August 22, 2019 @Gremillion replace GameData/RealismOverhaul/RO_SuggestedMods/SSTU/SSTU_Tanks.cfg with https://raw.githubusercontent.com/KSP-RO/RealismOverhaul/master/GameData/RealismOverhaul/RO_SuggestedMods/SSTU/SSTU_Tanks.cfg Quote Link to comment Share on other sites More sharing options...
Gremillion Posted August 23, 2019 Share Posted August 23, 2019 17 hours ago, Starwaster said: @Gremillion replace GameData/RealismOverhaul/RO_SuggestedMods/SSTU/SSTU_Tanks.cfg with https://raw.githubusercontent.com/KSP-RO/RealismOverhaul/master/GameData/RealismOverhaul/RO_SuggestedMods/SSTU/SSTU_Tanks.cfg SUCCESS!!! Quote Link to comment Share on other sites More sharing options...
Gremillion Posted August 23, 2019 Share Posted August 23, 2019 Uhhhhhh Quote Link to comment Share on other sites More sharing options...
Gremillion Posted August 23, 2019 Share Posted August 23, 2019 Is this a feature I'm not aware of? It hasn't been in any of my previous RSS/RO installs. Quote Link to comment Share on other sites More sharing options...
kraden Posted August 24, 2019 Share Posted August 24, 2019 @Gremillion to what are you referring? Quote Link to comment Share on other sites More sharing options...
Gremillion Posted August 24, 2019 Share Posted August 24, 2019 (edited) 16 hours ago, kraden said: @Gremillion to what are you referring? Multiple apoapses and stuff. Never seen those markers before. I have a better sense of what they mean now but it was weird. Is it a new feature? Edited August 24, 2019 by Gremillion Quote Link to comment Share on other sites More sharing options...
AVaughan Posted August 24, 2019 Share Posted August 24, 2019 You have principia installed. That adds n-body physics. I'm guessing that is the cause. Quote Link to comment Share on other sites More sharing options...
kraden Posted August 25, 2019 Share Posted August 25, 2019 I'm fairly certain that is principia as well. I have it installed on my RO install and I get the same thing. If you open principia and change the reference frame to something else (ship I think) it'll look like you're used to. Quote Link to comment Share on other sites More sharing options...
v44n Posted August 26, 2019 Share Posted August 26, 2019 (edited) Hello guys! I am trying to get RSS/RO working on the last version of KSP, CKAN doesn't let me install the mods (incompatible) & no luck doing It mannualy. Does the mod is updated to date or I should get an older version of KSP?. (If that is the case, would you guys tell me which one do you recommend?) Thanks for reading! Problem solved guys! I downloaded the 1.6.1 version and everything is working great Edited August 27, 2019 by v44n Quote Link to comment Share on other sites More sharing options...
Gremillion Posted August 27, 2019 Share Posted August 27, 2019 On 8/24/2019 at 5:19 PM, AVaughan said: You have principia installed. That adds n-body physics. I'm guessing that is the cause. Huh. Prinicipia must have been broken before. Well, neat! Quote Link to comment Share on other sites More sharing options...
kraden Posted August 28, 2019 Share Posted August 28, 2019 7 hours ago, Gremillion said: Huh. Prinicipia must have been broken before. Well, neat! One easy way to check to see if it's working is to look at your apogee and perigee while on orbit. If they are changing slightly without thrust, that's because pricipia is working and the moon, sun, Jupiter, etc are affecting your orbit. Quote Link to comment Share on other sites More sharing options...
Clockwork13 Posted August 29, 2019 Share Posted August 29, 2019 Is it just me or are all the parts scaled incorrectly? I tried creating an RO career save and all of the liquid engines are slightly wider than the fuel tanks and all claim to be 1 meter across regardless of how big they actually are. Quote Link to comment Share on other sites More sharing options...
siimav Posted August 29, 2019 Share Posted August 29, 2019 11 hours ago, Clockwork13 said: Is it just me or are all the parts scaled incorrectly? I tried creating an RO career save and all of the liquid engines are slightly wider than the fuel tanks and all claim to be 1 meter across regardless of how big they actually are. It's possible that the engines that use stock textures aren't resized correctly. As a solution I would recommend installing a mod called ROEngines which contains most of the engines you'll ever need. All the parts it has look almost identical to real life and their dimensions are also as accurate as possible. Quote Link to comment Share on other sites More sharing options...
Starwaster Posted August 30, 2019 Share Posted August 30, 2019 (edited) Real Fuels update. It should hit CKAN whenever it does indexing. version 12.8.0 change log Make MLI cost, mass and max layers configurable (in part config file) Changed Show UI and Hide UI to Show Tank UI and Hide Tank UI (PAW text) Unmanaged resources. ModuleFuelTanks can have UNMANAGED_RESOURCE node to declare a resource name, amount and maxAmount (same format as RESOURCE). Even if all tanks are removed, this unmanaged resource will always be present and all tank resource amounts are in addition to the unmanaged quantity. tank type initializes with Default if no type is specified. (fixes edge case physics breaking bug) GUI performance improvements by @yump Fixed TANK_DEFINITION fallback system Fixes and improvements for engine GUI and engine GUI symmetry handling Fixed issue where selecting different MEC engine configurations would cause a tank PAW to fill with duplicate config buttons. by @todi added new TANK_DEFINITION fields by @siimav actually find a fallback MEC config instead of lying and saying we couldn't find one when we didn't look for one! boiloff data available in PAW without spamming the log with debug data. Stock Real Fuels now has MLI Tech Upgrades. Max layers will increase as you progress through fuel / construction nodes in career. Certain procedural parts will correctly calculate tank surface area in editor. (by correct we mean it should match up with what you see in flight mode so costs and mass will be consistent). Does this for SSTU, Procedural Parts, B9 Procedural Wings and ROTanks Boil-off of propellants will respect the infinite propellant cheat if it is turned on. Edited August 30, 2019 by Starwaster Quote Link to comment Share on other sites More sharing options...
Windows XP SP2 Posted August 30, 2019 Share Posted August 30, 2019 it would appear ckan is missing some needed mod * RealismOverhaul v12.7.2 missing dependency SmokeScreen * RCSBuildAidCont 1:0.9.8 missing dependency ClickThroughBlocker * RealSolarSystem v16.2 missing dependency Kopernicus 2:release-1.3.1-7 or later * TACLS v0.13.12.0 missing dependency BackgroundResources * Toolbar 1.7.19 missing dependency ClickThroughBlocker * CryoEngines 1:0.7.0 missing dependency B9PartSwitch * CryoEngines 1:0.7.0 missing dependency DeployableEngines * NearFutureConstruction 1.1.3 missing dependency B9PartSwitch * NearFuturePropulsion 1.1.0 missing dependency B9PartSwitch * NearFutureSpacecraft 1.2.4 missing dependency B9PartSwitch * RN-SovietRockets 2:v3.2 missing dependency BDAnimationModules * RN-SovietRockets 2:v3.2 missing dependency TexturesUnlimited * RN-SalyutStations 1:v3.1 missing dependency BDAnimationModules * RN-SalyutStations 1:v3.1 missing dependency TexturesUnlimited * RN-Skylab 1:v1.8.3 missing dependency BDAnimationModules * RN-SovietProbes 1:v2.6 missing dependency BDAnimationModules * RN-SovietProbes 1:v2.6 missing dependency TexturesUnlimited * RN-SovietSpacecraft 1:v1.8.2 missing dependency BDAnimationModules * RN-SovietSpacecraft 1:v1.8.2 missing dependency TexturesUnlimited * RN-USProbesPack 1:v0.74 missing dependency BDAnimationModules * RN-USProbesPack 1:v0.74 missing dependency TexturesUnlimited * RN-USRockets 1:v0.9.3 missing dependency BDAnimationModules * RN-USRockets 1:v0.9.3 missing dependency TexturesUnlimited * SXTContinued 1:0.3.27 missing dependency RetractableLiftingSurface * FerramAerospaceResearchContinued 3:0.15.11.1 missing dependency ModularFlightIntegrator * RealHeat v4.9 missing dependency ModularFlightIntegrator * RealPlume 2:v11.2.0 missing dependency SmokeScreen * ToolbarController 1:0.1.8.2 missing dependency ClickThroughBlocker Error during installation! An unknown error occurred, please try again! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.