Toranks Posted July 1, 2018 Share Posted July 1, 2018 (edited) On 4/2/2018 at 3:49 AM, Gordon Dry said: I have set UnlinkedControl = full but I have no control after signal lost - in the middle of a maneuver burn and the engine stays on... Me too. It's a bug? Edit: Resolved. It's an option on difficult advanced options Edited July 1, 2018 by Toranks Link to comment Share on other sites More sharing options...
PiezPiedPy Posted July 1, 2018 Share Posted July 1, 2018 7 hours ago, Toranks said: Where is the hibernate/sleep option for satellites? It has been removed on kerbalism, but there are no alternatives... I plan on bringing this back one day Link to comment Share on other sites More sharing options...
N70 Posted July 2, 2018 Author Share Posted July 2, 2018 (edited) 1.7.1 is out. I also released a 1.3.x backport. Changelog: ### Changes since the last release * The Chemical Plant and External Life Support have had a repaint (PiezPiedPy) * Added Xenon Gas to the Radial Pressurized Tanks (PiezPiedPy) * Added Engines and RCS that use EC and/or LH2 when supported by a mod such as USI to the Planner (PiezPiedPy) * Added part specific tags (Gordon Dry) * A simple support patch for RealBattery - no final solution (Gordon Dry) * Recalculated pressure control EC consumption to be more realistic (PiezPiedPy) * Increase all crewable parts' EC because ECLSS uses EC constantly, you wanna survive in the Apollo LM, right? (Gordon Dry, PiezPiedPy) * Quick'n'dirty fix for GPOSpeedFuelPump to avoid shielding to be pumpable by default (Gordon Dry) * Reliability: mtbf depends mass; lighter parts last longer - max. ~16 years (~64 years in high quality), heavier parts last shorter - min. ~4 years (~16 years in high quality). Built in reliability modules don't take the whole part's mass into account, but their respective extra_mass (Gordon Dry) * Greenhouses now act like a scrubber and also will not use CO2 or produce O2 when in a breathable atmosphere (PiezPiedPy) * Reliability: mass and cost difference between standard and high quality is now relative to the part type (Gordon Dry) * Allow vessel config when there is no vessel signal (PiezPiedPy) * Fixed EVA Scrubber, ooops was broken by changes to Habitation (PiezPiedPy) * Fuel Cells are now configurable with H2+O2 and Monoprop+O2 processes (PiezPiedPy) * Added LH2+O2 processes to the Fuel Cells for USI and CryoTanks Support (PiezPiedPy) * Added Hydrogen Liquefaction and Liquid Hydrogen Evaporator processes to USI and CryoTanks Support (PiezPiedPy) * Fixed CryoTanks NRE in Planner and added LH2 to radial tanks for CryoTanks Support (PiezPiedPy) Edited July 2, 2018 by N70 Link to comment Share on other sites More sharing options...
AngrybobH Posted July 3, 2018 Share Posted July 3, 2018 I have a couple of questions. Is there a up to date chart on the usage and production of all resources and pretend resources like humidity? The planner is only useful for the current vessel being built and cannot plan for things like station building/expansion. I'm not opposed to doing my own math and I like charts. Does such a thing exist? Does having 2 or more mobile processing labs increase the speed of research? I can't seem to get any data into a second lab so I can work on 2 things at once. Intended behavior or broken? Is compatibility with multi-sample science parts from Dmagic orbital science on the radar to be fixed? currently only 1 sample can be collected before reset is required. Also compatibility with universal storage alkali fuel cell in the automation and background processes would be nice. Are there any plans on making the chem plants and external life support parts in a radial mount(or making existing ones also radially mountable) and possibly compatible with tweakscale(more capacity with less part count)...and universal storage? US chem plants and external life support would be useful. Link to comment Share on other sites More sharing options...
Toranks Posted July 3, 2018 Share Posted July 3, 2018 (edited) ModuleManager show me this messages on log: Spoiler [....] [LOG 06:07:57.493] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to NearFutureSpacecraft/Parts/Command/command-pods/command-mk3-9/PART [WRN 06:07:57.493] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.493] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.493] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.493] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.493] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.493] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.493] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.493] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.494] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to NearFutureSpacecraft/Parts/Command/command-pods/command-mk4-1/PART [WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.494] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to NearFutureSpacecraft/Parts/Command/command-pods/command-ppd-1/PART [WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.494] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to NearFutureSpacecraft/Parts/Utility/utility-pod-25/utility-pod-25/PART [WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.494] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to PlanetaryBaseInc/BaseSystem/Parts/Command/CentralHub/Central_Hub/PART [WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.494] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to PlanetaryBaseInc/BaseSystem/Parts/Command/Control/Control_g/PART [WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.494] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to PlanetaryBaseInc/BaseSystem/Parts/Command/Control/Cupola_g/PART [WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.494] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.494] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.494] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to PlanetaryBaseInc/BaseSystem/Parts/Science/ScienceLab_g/PART [WRN 06:07:57.531] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.533] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.533] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.533] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.533] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.533] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.533] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.533] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.533] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to PlanetaryBaseInc/BaseSystem/Parts/Structural/Corridors/corridor_airlock/PART [WRN 06:07:57.533] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.533] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.533] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.533] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.533] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.533] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.533] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.533] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.533] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to PlanetaryBaseInc/BaseSystem/Parts/Utility/Airlocks/airlock_end_g/PART [WRN 06:07:57.533] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.533] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.533] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.533] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.533] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.533] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.533] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.533] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.533] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to PlanetaryBaseInc/BaseSystem/Parts/Utility/Airlocks/airlock_mid_g/PART [WRN 06:07:57.533] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.533] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.533] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.533] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.533] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.533] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.534] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to PlanetaryBaseInc/BaseSystem/Parts/Utility/Garages/garage_adapter_g/PART [WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.534] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to PlanetaryBaseInc/BaseSystem/Parts/Utility/Habitats/Habitat_MK1_g/PART [WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.534] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to PlanetaryBaseInc/BaseSystem/Parts/Utility/Habitats/Habitat_MK2_g/PART [WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.534] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to Squad/Parts/Command/cupola/cupola/PART [WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.534] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to Squad/Parts/Command/hitchhikerStorageContainer/hitchikerStorageContainer/PART [WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.534] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to Squad/Parts/Command/Mk1-2Pod/mk1-2CommandPod/PART [WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.534] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.534] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.535] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to Squad/Parts/Command/Mk1-3Pod/mk1-3/PART [WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.535] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to Squad/Parts/Command/mk1Cockpits/mk1Cockpit/PART [WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.535] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to Squad/Parts/Command/mk1Cockpits/mk1CrewCabin/PART [WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.535] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to Squad/Parts/Command/mk1Cockpits/mk1InlineCockpit/PART [WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.535] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to Squad/Parts/Command/mk1LanderCan/mk1LanderCan/PART [WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.535] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to Squad/Parts/Command/mk1pod/mk1Pod/PART [WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.535] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to Squad/Parts/Command/mk2CockpitInline/mk2CockpitInline/PART [WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.535] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.535] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.536] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to Squad/Parts/Command/mk2CockpitStandard/mk2CockpitStandard/PART [WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.536] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to Squad/Parts/Command/mk2LanderCan/mk2LanderCan/PART [WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.536] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to Squad/Parts/Command/mk3CockpitShuttle/mk3CockpitShuttle/PART [WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.536] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to Squad/Parts/FuelTank/mk3Fuselage/CREW/PART [WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.536] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to Squad/Parts/Science/LargeCrewedLab/largeCrewedLab/PART [WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.536] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to Squad/Parts/Utility/mk2CrewCabin/mk2CrewCabin/PART [WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.536] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.536] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.537] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.537] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.537] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.537] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.537] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to SquadExpansion/MakingHistory/Parts/Pods/KV1Pod/PART [WRN 06:07:57.537] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.537] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.537] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.537] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.537] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.537] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.537] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.537] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.537] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to SquadExpansion/MakingHistory/Parts/Pods/KV2Pod/PART [WRN 06:07:57.537] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.537] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.537] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.537] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.537] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.537] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.537] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.537] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.537] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to SquadExpansion/MakingHistory/Parts/Pods/KV3Pod/PART [WRN 06:07:57.573] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.574] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.574] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.574] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.574] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.574] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.574] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.574] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.574] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to SquadExpansion/MakingHistory/Parts/Pods/Mk2Pod/PART [WRN 06:07:57.574] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.574] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.574] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.574] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.574] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.574] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.574] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.574] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.574] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[*]:HAS[#CrewCapacity[>0]] to SquadExpansion/MakingHistory/Parts/Pods/Size1_5_Lander/PART [WRN 06:07:57.574] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.574] [ModuleManager] Error - Cannot parse variable search when inserting new key amount = #$../CrewCapacity$ [WRN 06:07:57.574] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.575] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.575] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.575] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [WRN 06:07:57.575] [ModuleManager] Cannot find key CrewCapacity in SETUP [ERR 06:07:57.575] [ModuleManager] Error - Cannot parse variable search when inserting new key maxAmount = #$../CrewCapacity$ [LOG 06:07:57.575] [ModuleManager] Applying update Kerbalism/Profiles/Default/@PART[mk3Cockpit_Shuttle] to Squad/Parts/Command/mk3CockpitShuttle/mk3CockpitShuttle/PART [....] [LOG 06:08:03.336] [ModuleManager] Done patching [WRN 06:08:03.342] [ModuleManager] Errors in patch prevents the creation of the cache [LOG 06:08:03.346] [ModuleManager] ModuleManager: 2542 patches applied, found <color=orange>140 errors</color> 140 errors related to GameData/Kerbalism/Profiles/Default.cfg What is this? Possible bug: Now command pods and similar no longer have stored nitrogen I cant activate humidifier on pods Edited July 3, 2018 by Toranks New data Link to comment Share on other sites More sharing options...
Toranks Posted July 3, 2018 Share Posted July 3, 2018 (edited) Bug resolved here:https://github.com/steamp0rt/Kerbalism/commit/702c1fc6df46af9f7712ffa962e3078a4fda9ce1#diff-ac19784b23cd3ecca497f61ea8446519 Edited July 3, 2018 by Toranks Link to comment Share on other sites More sharing options...
tonimark Posted July 3, 2018 Share Posted July 3, 2018 (edited) ATTENTION MODULE MANAGER REPORTED 256 ERRORS ON KERBALISM DEFAULT CONFIG!!! after the last update Edited July 3, 2018 by tonimark Link to comment Share on other sites More sharing options...
Toranks Posted July 3, 2018 Share Posted July 3, 2018 It is the same as I said, it is resolved by making these changes ( https://github.com/steamp0rt/Kerbalism/commit/702c1fc6df46af9f7712ffa962e3078a4fda9ce1#diff-ac19784b23cd3ecca497f61ea8446519 ). It is not available in the download version yet. Link to comment Share on other sites More sharing options...
N70 Posted July 3, 2018 Author Share Posted July 3, 2018 1.7.1.1 is out for KSP 1.4.x and 1.3.1. It fixes the MM bugs. Link to comment Share on other sites More sharing options...
ecaheti Posted July 4, 2018 Share Posted July 4, 2018 (edited) Hi, my container does not show any food or water (fresh install of KSP1.4.4 and Kerbalism 1.7.1.1), am I missing something ? Spoiler edit : Humm same stuff with 1.6, I need to clean on my side first. edit2 : After clearing all mods, just Kerbalism, I cannot found Container anymore. what? Edited July 4, 2018 by ecaheti Link to comment Share on other sites More sharing options...
oslowa Posted July 4, 2018 Share Posted July 4, 2018 (edited) Thanks so much for the backport, great work. Where/who should I talk to to get the ckan copy updated? Edit. Still got the same problems with SSPXR inflatables though Edited July 7, 2018 by oslowa Link to comment Share on other sites More sharing options...
Nathangun Posted July 7, 2018 Share Posted July 7, 2018 Does anyone if KERBALISM work with Capsule Corp. Exploration ( Moon Village ) ? Link to comment Share on other sites More sharing options...
theJesuit Posted July 7, 2018 Share Posted July 7, 2018 6 hours ago, Nathangun said: Does anyone if KERBALISM work with Capsule Corp. Exploration ( Moon Village ) ? Not sure. But it would be an interesting tweak/patch to use nitrogen/O2 to inflate and have heavy shielding like the electric radiation shield that takes no power but is permanently on - however kerbalism will still think that you are on EVA if you are walking in around in the done. I'm not sure that Kerbalism takes the occlusion of parts into account in regards to radiation. I have always wanted a mechanic that would treat an eva kerbal within a closed cargo bay (or a fairing if you can get in there) as if it was in an atmosphere. Perhaps somehow using the aerodynamic occulsion model. I had thought this would be used to be mainly to allow TextureReplacer to be okay with taking helmets off on the Mün or in orbit but the module could be applied the Capsule Corp parts as well. Unfortunately this dosen't exist. Intersesting idea though! How much does kerbalism calculate volume and surface area for the domes? Link to comment Share on other sites More sharing options...
Nathangun Posted July 8, 2018 Share Posted July 8, 2018 16 hours ago, theJesuit said: How much does kerbalism calculate volume and surface area for the domes? Jeez, that's a good question and above my technical skill. Link to comment Share on other sites More sharing options...
PiezPiedPy Posted July 8, 2018 Share Posted July 8, 2018 (edited) On 7/4/2018 at 10:35 AM, ecaheti said: Hi, my container does not show any food or water (fresh install of KSP1.4.4 and Kerbalism 1.7.1.1), am I missing something ? Try deleting the Kerbalism folder and the MM files except the MM dll then reinstall Kerbalism On 7/4/2018 at 11:47 AM, oslowa said: Still got the same problems with SSPXR inflatables though For the Habitats to inflate you will need a pressure controller, and enough nitrogen and O2 to fill them, don't forget EC too, then just wait for them to expand, adding extra pressure controllers will expand them quicker, it can take a while with just one, for example Kerbalisms Gravity ring will take approx. 3 days to inflate with a single Mk1 pod pressure controller. On 7/7/2018 at 8:15 PM, theJesuit said: How much does kerbalism calculate volume and surface area for the domes? Kerbalism uses the parts bounding box to calculate volume if the part has no Habitat module Edited July 8, 2018 by PiezPiedPy Link to comment Share on other sites More sharing options...
BlackDragon Korean Posted July 10, 2018 Share Posted July 10, 2018 (edited) thx for new update and backport. i have one bugs in backport 1.7.1.1. in VAB/SPH, i can't open kerbalism menu like image below. ksp 1.3.1, kerbalism 1.7.1.1-bp, MM 3.0.4, CRP 0.10.0.0 Edited July 10, 2018 by BlackDragon Korean Link to comment Share on other sites More sharing options...
PiezPiedPy Posted July 10, 2018 Share Posted July 10, 2018 (edited) On 7/10/2018 at 7:46 AM, BlackDragon Korean said: thx for new update and backport. i have one bugs in backport 1.7.1.1. in VAB/SPH, i can't open kerbalism menu like image below. ksp 1.3.1, kerbalism 1.7.1.1-bp, MM 3.0.4, CRP 0.10.0.0 Try the usual deleting the Kerbalism folder and the MM files except the MM dll then reinstall Kerbalism. Also if you have a Steam install validate it For those who are not aware that there is a Discord server for Kerbalism, here you go https://discord.gg/NgFawe4 Edited July 12, 2018 by PiezPiedPy Link to comment Share on other sites More sharing options...
-MadMan- Posted July 11, 2018 Share Posted July 11, 2018 DMagic BioDrill can take 3 subsurface samples. In Kerbalism can take just 1 sample. Is this bug or feature? Link to comment Share on other sites More sharing options...
lordcirth Posted July 11, 2018 Share Posted July 11, 2018 7 hours ago, -MadMan- said: DMagic BioDrill can take 3 subsurface samples. In Kerbalism can take just 1 sample. Is this bug or feature? Known bug. Kerbalism replaces science modules with its own, and doesn't handle DMagic's custom multi-sample. Link to comment Share on other sites More sharing options...
Darkherring Posted July 11, 2018 Share Posted July 11, 2018 Is there an option to reset the critical failure? I mean, I have a station in orbit and one of the reaction wheels got critically damaged. I don't care about it, as I have other, but there is this red icon in the Kerbalism window that is bugging me. Link to comment Share on other sites More sharing options...
PiezPiedPy Posted July 12, 2018 Share Posted July 12, 2018 6 hours ago, Darkherring said: Is there an option to reset the critical failure? I mean, I have a station in orbit and one of the reaction wheels got critically damaged. I don't care about it, as I have other, but there is this red icon in the Kerbalism window that is bugging me. An Kerbal on EVA can fix some failures and an engineer on EVA can fix all failures. Link to comment Share on other sites More sharing options...
ecaheti Posted July 12, 2018 Share Posted July 12, 2018 On 7/8/2018 at 10:55 PM, PiezPiedPy said: Try deleting the Kerbalism folder and the MM files except the MM dll then reinstall Kerbalism Unfortunately it is not working. I've also tested to wipe KSP from everywhere on the PC (users & co), reinstall just Kerbal without Making History ext, wipe all MM files except dll... Still got the problem. for the record, i've downloaded Kerbalism from spacedock. Link to comment Share on other sites More sharing options...
N70 Posted July 12, 2018 Author Share Posted July 12, 2018 Good new, there is now a ReadTheDocs for Kerbalism. It's a WIP, but better than nothing! https://kerbalism.readthedocs.io/en/latest/index.html Link to comment Share on other sites More sharing options...
PiezPiedPy Posted July 13, 2018 Share Posted July 13, 2018 18 hours ago, ecaheti said: Unfortunately it is not working. I've also tested to wipe KSP from everywhere on the PC (users & co), reinstall just Kerbal without Making History ext, wipe all MM files except dll... Still got the problem. for the record, i've downloaded Kerbalism from spacedock. Did you install Community Resource Pack (CRP) Kerbalism requires it Link to comment Share on other sites More sharing options...
ecaheti Posted July 13, 2018 Share Posted July 13, 2018 5 hours ago, PiezPiedPy said: Did you install Community Resource Pack (CRP) Kerbalism requires it Hey ! My bad, here is the point. Many thanks ! Link to comment Share on other sites More sharing options...
Recommended Posts