Jump to content

[1.3.0] Kerbal Engineer Redux 1.1.3.0 (2017-05-28)

cybutek

By cybutek
in KSP1 Mod Releases

 Share

Recommended Posts

maja

maja

Posted
Posted (edited)
2 hours ago, Padishar said:

@maja, you can find a version that should fix your problem here:

https://www.dropbox.com/s/n936hgqhvjpypu7/KerbalEngineer-1.1.2.2p.zip?dl=0

It may also fix the occasional crashes when switching to target, or it may not...

Yep, error is gone. Nice and quick work :)

Also I tested @Rantanplan1986's issue with a skycrane, because I have that mod. Accessibility of deltaV readouts for a skycrane depends on the order in which fuel tanks are added. Fuel tanks must be added after the skycrane for proper calculation of the deltaV. If the fuel tank is added first and the skycrane second, then KER shows that stage with 0 deltaV (in all stages). It's the same regardless if the root is the probe, the fuel tank or the skycrane.

Edited by maja
Link to comment
Share on other sites
Rantanplan1986

Rantanplan1986

Posted
Posted
2 hours ago, Padishar said:

I don't have that mod and it may take me a couple of days to get around to installing it.  In VAB screenshots, you should always click the "All Stages" button in the build engineer.  This will cause the window to also show those stages that have 0 deltaV and this can be a great help to work out what is happening.  Those logs are unlikely to show anything useful for deltaV calculation issues.  To make the logs useful you need to click the Settings button and then click the "Verbose Simulation Log" button.  This will cause the deltaV calculation code to dump a lot of information about the vessel and how the calculations were done into the log.  Do this in each of the situations you want to show and then upload the output_log.txt file from the KSP_x64_Data folder (not either of those other logs).

Do you know what happens if either the fuel tank or the parachute (assuming it lets you) is the root?

One other thing you could try is after setting a different part to be root, detach all the fuel tanks from the new root part and then reattach them.  This may reset some of the fuel flow system (this used to be required when rerooting in earlier versions and I'm not sure if it was fixed in 1.2 so giving it a try can't hurt).

One other thing, you have a large amount of mods installed.  Are you sure that they have all been updated to work with KSP 1.2?  Even a single plugin not specifically built for 1.2 can cause problems for other mods and/or the stock game code.

Ok, second try. Screenshots here (this time i also put descriptions) and the Output Log File.

 

All my mod were released for 1.2. Nevertheless. some of the are the first iteration or are simply recompiled to work with 1.2 and surely have their own quirks and bugs. One of it might even be the root cause for this, but you ask to report any flawed behavior of KER, so i did. :)

Link to comment
Share on other sites
Padishar

Padishar

Posted
Posted (edited)
12 minutes ago, Rantanplan1986 said:

Ok, second try. Screenshots here (this time i also put descriptions) and the Output Log File.

All my mod were released for 1.2. Nevertheless. some of the are the first iteration or are simply recompiled to work with 1.2 and surely have their own quirks and bugs. One of it might even be the root cause for this, but you ask to report any flawed behavior of KER, so i did. :)

Thanks for that.  From a first quick scan it looks like the code is failing to find the fuel tank to assign the "drain rate" to in some of the cases for some reason.  I'll take a closer look later today and see if I can work out why...

Edited by Padishar
Link to comment
Share on other sites
Rantanplan1986

Rantanplan1986

Posted
Posted

Hi there,

its me again and i found something unusual again, this time in flight. :D

This time its the TWR display in the "Vessel" tab while in flight.

I took a few Screenshots.

In summary: first i noticed that the TRW-Display in the "Vessel"-tab showed 0/450(-ish), from a running science-mode game craft (which it had not tested by a short burn), counting down fast, so took some screenshots (the first 4 pictures). 

I started a new sandbox game and build 2 testcraft where are the rest of the pictures are from. First i thought the tremendous amout of TRW was a glitch from switching to and back from Trackingstation but as it turs out it wasn't, but some other weirdness happens.

TRW in the display was rising slowly without using any resources to make the craft any lighter. 

 

Let me know if i can provide any additional logs or files (while its the display while in flight i'm not sure if any log contains some useful information)

Link to comment
Share on other sites
Padishar

Padishar

Posted
Posted
14 minutes ago, Rantanplan1986 said:

Hi there,

its me again and i found something unusual again, this time in flight. :D

This time its the TWR display in the "Vessel" tab while in flight.

I took a few Screenshots.

In summary: first i noticed that the TRW-Display in the "Vessel"-tab showed 0/450(-ish), from a running science-mode game craft (which it had not tested by a short burn), counting down fast, so took some screenshots (the first 4 pictures). 

I started a new sandbox game and build 2 testcraft where are the rest of the pictures are from. First i thought the tremendous amout of TRW was a glitch from switching to and back from Trackingstation but as it turs out it wasn't, but some other weirdness happens.

TRW in the display was rising slowly without using any resources to make the craft any lighter. 

 

Let me know if i can provide any additional logs or files (while its the display while in flight i'm not sure if any log contains some useful information)

That TWR readout uses local gravity.  You are currently a very long way from a body with not much gravity so your weight (the force acting on the vessel due to gravity) is very low and your TWR is very high.  As you get further away your weight decreases and the TWR increases.  The TWR (Surface) readout is showing what your TWR would be on the surface of the body you are orbiting (or, in your case, flying by).  The Acceleration readout is usually more useful in orbit (being basically the thrust-to-mass ratio rather than weight), in this case reading 6.18m/s^2, which is 3.79 Mun surface TWR or 0.63 Kerbin surface TWR.

Link to comment
Share on other sites
Rantanplan1986

Rantanplan1986

Posted
Posted
2 minutes ago, Padishar said:

That TWR readout uses local gravity

:0.0: Has that always been like that? i have to admit i barely paid attention to that much before (unless i was ascending) until now, where i read all the numbers extra careful to maybe find any flaws :D

But its good to know that its working as intended.

Link to comment
Share on other sites
Terwin

Terwin

Posted
Posted
14 minutes ago, Rantanplan1986 said:

:0.0: Has that always been like that? i have to admit i barely paid attention to that much before (unless i was ascending) until now, where i read all the numbers extra careful to maybe find any flaws :D

But its good to know that its working as intended.

That is the way KER worked when I used it in 1.1.3 and earlier.

if I'm in orbit, TWR is not terribly useful, but acceleration sure is.(Surface TWR is pretty useful as well, just remember that it is using the current atmospheric density, not the surface atmospheric density)

Link to comment
Share on other sites
SqOne01

SqOne01

Posted
Posted
On 10/19/2016 at 4:17 AM, Padishar said:

 

....you can find a version that should fix your problem here:

https://www.dropbox.com/s/n936hgqhvjpypu7/KerbalEngineer-1.1.2.2p.zip?dl=0

It may also fix the occasional crashes when switching to target, or it may not...

 

Thanks for the beta version! Tried it last night and it works for what I need it for at the time (Delta V and orbit info). I PayPaled some coffee money to you guys. Thanks for making KSP even more enjoyable. I didnt realize how much I appreciated this mod until I went to KSP 1.2 and didnt have KER!

Link to comment
Share on other sites
Red Iron Crown

Red Iron Crown

Posted
Posted
On 10/19/2016 at 4:56 PM, Rantanplan1986 said:

:0.0: Has that always been like that? i have to admit i barely paid attention to that much before (unless i was ascending) until now, where i read all the numbers extra careful to maybe find any flaws :D

Been that way for as long as I can remember. 

Link to comment
Share on other sites
Murdabenne

Murdabenne

Posted
Posted

Just looking for a bit of clarity - I've looked back at the front page, and the past 3 pages here at the end.  Who is the author that will be doing the "official" build and release - is it Cybutek (based on front page) or is it Padishar (based on the tone of posts here at the end)?  And I've seen mention of a 1.2 update, will that be announced on the front page as well as buried at the end of the thread?

Link to comment
Share on other sites
Padishar

Padishar

Posted
Posted
1 hour ago, Murdabenne said:

Just looking for a bit of clarity - I've looked back at the front page, and the past 3 pages here at the end.  Who is the author that will be doing the "official" build and release - is it Cybutek (based on front page) or is it Padishar (based on the tone of posts here at the end)?  And I've seen mention of a 1.2 update, will that be announced on the front page as well as buried at the end of the thread?

I'm not sure what you mean by "the tone of posts here at the end".  Cybutek is still the official maintainer.  He did the work required to make KER basically functional and announced how this version can be downloaded directly from GitHub for people that are desperate for a version for KSP 1.2.  I have since made various other changes to fix a couple of issues in the deltaV calculations (still more work to do for full KSP 1.2 support), fix a couple of other little bugs and to reduce the garbage generated (still lots of work to do here) and have released a test build of my pull request branch (currently version 1.1.2.2p) so that people can test it.  There will be an official release compatible with KSP 1.2 at some point and that will be announced in the first post and at the end.

Link to comment
Share on other sites
Murdabenne

Murdabenne

Posted
Posted

By tone, I meant that people are deferential to the work you are doing, the way they would address questions to a maintainer/author.  Nothing bad, just respect (which is nice, versus the usual demands some people post)  and type of questions (very specific bugs). Thanks for the clarification!

Link to comment
Share on other sites
Padishar

Padishar

Posted
Posted
54 minutes ago, Murdabenne said:

By tone, I meant that people are deferential to the work you are doing, the way they would address questions to a maintainer/author.  Nothing bad, just respect (which is nice, versus the usual demands some people post)  and type of questions (very specific bugs). Thanks for the clarification!

Ahh, I see, you're welcome.  I've been involved in the development of KER, making significant contributions to the code (mostly in the area of the deltaV calculations) and providing support in this thread, since around March 2014 so the regulars here are well aware of my "qualifications" for making the posts I do and (almost always) treat my posts with respect.

Link to comment
Share on other sites
E-Rikkie

E-Rikkie

Posted
Posted

I don't know if it's ever been asked, but if it is my excuse is not reading 136 pages :P

But could KER main panel be made "inverse" with the panels. Normally the panels appear at the bottom of the control bar, but could you make a checkbox so that they appear above the control bar, like in the mockup screenshot. Then the control bar can stay there while i disable panels to get better view.

HDndcXY.jpg

 

Link to comment
Share on other sites
moronwrocket

moronwrocket

Posted
Posted

It's actually been refreshing to go "old school" and hand - calculate TWR and minimum dV (starting with a full tank, anyways!).  Really missing the orbital period functions though - Makes it difficult to build a full coverage commnet without accurate orbits!  And I can't develop my Duna infrastructure without more accurate dV numbers. :)

Thanks for all your work Cybutek and Padishar!

Link to comment
Share on other sites
Paaaad

Paaaad

Posted
Posted

Getting game crashes when trying to "Switch to Target", reproducible, if a bit unpredictable. 

Executing: KerbalEngineer - 1.1.2.1
Assembly: C:\Users\Escott O. Smith III\Desktop\KSP_win64\GameData\KerbalEngineerTemp\KerbalEngineer.dll

[Log 18:49:05.6970860]: images (UnityEngine.AssetBundle)
[Log 18:52:21.7318811]: ActionMenu->Awake
[Log 18:52:21.7429121]: Assembly: Assembly-CSharp, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null
Assembly: AmbientLightAdjustment, Version=2.5.8.5, Culture=neutral, PublicKeyToken=null
Assembly: MiniAVC, Version=1.0.3.0, Culture=neutral, PublicKeyToken=null
Assembly: DistantObject, Version=1.8.0.28621, Culture=neutral, PublicKeyToken=null
Assembly: GravityTurn, Version=1.6.1.39673, Culture=neutral, PublicKeyToken=null
Assembly: KerbalEngineer, Version=1.1.2.1, Culture=neutral, PublicKeyToken=null
Assembly: KerbalEngineer.Unity, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null
Assembly: MiniAVC, Version=1.0.3.2, Culture=neutral, PublicKeyToken=null
Assembly: KerbalAlarmClock, Version=3.8.0.0, Culture=neutral, PublicKeyToken=null
Assembly: TransferWindowPlanner, Version=1.6.0.0, Culture=neutral, PublicKeyToken=null

[Log 18:52:21.7429121]: FlightEngineerCore->Awake
[Log 18:52:24.5098075]: ActionMenu->Start
[Log 18:52:24.5839991]: FlightEngineerCore->Start
[Log 18:53:05.9202145]: FlightEngineerCore->OnDestroy
[Log 18:53:05.9292407]: ActionMenu->OnDestroy
[Log 18:53:06.0596031]: ActionMenu->Awake
[Log 18:53:06.0616089]: FlightEngineerCore->Awake
[Log 18:53:09.6721619]: ActionMenu->Start
[Log 18:53:09.6856976]: FlightEngineerCore->Start
[Log 18:53:49.7981978]: FlightEngineerCore->OnDestroy
[Log 18:53:49.8443233]: ActionMenu->OnDestroy
[Log 18:53:50.1160823]: ActionMenu->Awake
[Log 18:53:50.1180878]: FlightEngineerCore->Awake
[Log 18:53:53.5917585]: ActionMenu->Start
[Log 18:53:53.6062958]: FlightEngineerCore->Start
[Log 19:15:21.9730084]: ActionMenu->OnDestroy
[Log 19:15:21.9970739]: FlightEngineerCore->OnDestroy
[Log 19:15:22.2598075]: ActionMenu->Awake
[Log 19:15:22.2623149]: FlightEngineerCore->Awake
[Log 19:15:25.7112909]: ActionMenu->Start
[Log 19:15:25.7253308]: FlightEngineerCore->Start

Engineer Log of my last play session above... And what appears to be the relevant section of the game log below, starting just before I started trying to reproduce. 

[LOG 19:14:56.151] [FLIGHT GLOBALS]: Switching To Vessel Lab Station One ---------------------- 
[LOG 19:14:56.154] Camera Mode: AUTO
[LOG 19:14:56.550] 10/24/2016 7:14:56 PM,KerbalAlarmClock,Active Vessel unreadable - resetting inqueue flag
[LOG 19:14:56.590] 10/24/2016 7:14:56 PM,KerbalAlarmClock,Removing DrawGUI from PostRender Queue
[LOG 19:14:56.628] 10/24/2016 7:14:56 PM,KerbalAlarmClock,Vessel Change from 'No Vessel' to 'Lab Station One'
[LOG 19:14:56.659] 10/24/2016 7:14:56 PM,KerbalAlarmClock,Adding DrawGUI to PostRender Queue
[LOG 19:14:56.662] 10/24/2016 7:14:56 PM,KerbalAlarmClock,Skipping version check
[LOG 19:15:20.504] [FLIGHT GLOBALS]: Switching To Vessel RCS Fuel Depot Debris ---------------------- 
[LOG 19:15:20.532] Flight State Captured
[LOG 19:15:20.535] Saving Achievements Tree...
[LOG 19:15:20.536] Saving Achievements Tree...
[LOG 19:15:20.538] Saving Achievements Tree...
[LOG 19:15:20.540] Saving Achievements Tree...
[LOG 19:15:20.541] Saving Achievements Tree...
[LOG 19:15:20.543] Saving Achievements Tree...
[LOG 19:15:20.544] Saving Achievements Tree...
[LOG 19:15:20.558] [MessageSystem] Save Messages
[LOG 19:15:20.583] ScaleModList: listSize 205 maxListSize 428
[LOG 19:15:20.603] 10/24/2016 7:15:20 PM,KerbalAlarmClock,AppLauncher: Destroying Button-Button Count:8
[LOG 19:15:20.605] ScaleModList: listSize 205 maxListSize 428
[LOG 19:15:20.608] ScaleModList: listSize 205 maxListSize 428
[LOG 19:15:20.612] [UIMasterController]: HideUI
[WRN 19:15:20.723] [HighLogic]: =========================== Scene Change : From FLIGHT to FLIGHT =====================
[LOG 19:15:21.938] KbApp.OnDestroy Planet Info
[LOG 19:15:21.942] [UIApp] OnDestroy: KSPedia
[LOG 19:15:21.944] ScaleModList: listSize 205 maxListSize 428
[LOG 19:15:21.950] [UIApp] OnDestroy: ResourceDisplay
[LOG 19:15:21.951] ScaleModList: listSize 205 maxListSize 428
[LOG 19:15:21.957] 10/24/2016 7:15:21 PM,KerbalAlarmClock,Destroying the KerbalAlarmClock-KACFlight
[LOG 19:15:21.959] 10/24/2016 7:15:21 PM,KerbalAlarmClock,API Cleaned up
[LOG 19:15:21.973] KbApp.OnDestroy Planet Parameters
[LOG 19:15:21.988] [FlightEngineer]: Destroying Floating Window for VESSEL
[LOG 19:15:21.990] [FlightEngineer]: Destroying Floating Window for THERMAL
[LOG 19:15:21.991] [FlightEngineer]: Destroying Floating Window for HUD 1
[LOG 19:15:21.993] [FlightEngineer]: Destroying Floating Window for HUD 2
[LOG 19:15:21.995] [FlightEngineer]: Destroying Floating Window for RENDEZVOUS
[LOG 19:15:22.000] 10/24/2016 7:15:22 PM,TransferWindowPlanner,Destroying the TransferWindowPlanner (TWP)
[LOG 19:15:22.006] KbApp.OnDestroy NullName
[LOG 19:15:22.009] KbApp.OnDestroy Vessel Crew
[LOG 19:15:22.019] GravityTurn : Flightmap with 0.00 loss
[LOG 19:15:22.067] GravityTurn : FlightMap loaded with 0.00 loss
[LOG 19:15:22.104] GravityTurn : Vessel DB saved to C:\Users\Escott O. Smith III\Desktop\KSP_win64\GameData\GravityTurn\Plugins/PluginData/GravityTurn\gt_launchdb_RCS Fuel Depot_Kerbin.cfg
[LOG 19:15:22.109] GravityTurn : Window saved to C:\Users\Escott O. Smith III\Desktop\KSP_win64\GameData\GravityTurn\Plugins/PluginData/GravityTurn\gt_window_6378070.cfg
[LOG 19:15:22.114] GravityTurn : Window saved to C:\Users\Escott O. Smith III\Desktop\KSP_win64\GameData\GravityTurn\Plugins/PluginData/GravityTurn\gt_window_6378071.cfg
[LOG 19:15:22.118] GravityTurn : Window saved to C:\Users\Escott O. Smith III\Desktop\KSP_win64\GameData\GravityTurn\Plugins/PluginData/GravityTurn\gt_window_6378072.cfg
[LOG 19:15:22.123] GravityTurn : Window saved to C:\Users\Escott O. Smith III\Desktop\KSP_win64\GameData\GravityTurn\Plugins/PluginData/GravityTurn\gt_window_548302.cfg
[LOG 19:15:22.129] GravityTurn : Window saved to C:\Users\Escott O. Smith III\Desktop\KSP_win64\GameData\GravityTurn\Plugins/PluginData/GravityTurn\gt_window_6378074.cfg
[LOG 19:15:22.132] ScaleModList: listSize 205 maxListSize 428
[LOG 19:15:22.135] ScaleModList: listSize 205 maxListSize 428
[LOG 19:15:22.141] KbApp.OnDestroy Planet Resources
[LOG 19:15:22.144] KbApp.OnDestroy Unowned Info
[LOG 19:15:22.146] KbApp.OnDestroy Vessel Info
[LOG 19:15:22.169] UICanvasPrefabSpawner FlightUI spawning Flight
[LOG 19:15:22.201] UICanvasPrefabSpawner FlightUI spawning VesselLabels
[WRN 19:15:22.205] [UiApp] Awake: ResourceDisplay
[LOG 19:15:22.215] [AddonLoader]: Instantiating addon 'AeroGUI' from assembly 'KSP'
[LOG 19:15:22.222] [AddonLoader]: Instantiating addon 'AmbientLightAdjustment' from assembly 'AmbientLightAdjustment'
[LOG 19:15:22.225] [AddonLoader]: Instantiating addon 'DarkenSky' from assembly 'DistantObject'
[LOG 19:15:22.228] [AddonLoader]: Instantiating addon 'FlareDraw' from assembly 'DistantObject'
[LOG 19:15:22.230] Distant Object Enhancement v1.8.0 -- FlareDraw enabled
[EXC 19:15:22.233] ArgumentException: The Object you want to instantiate is null.
	UnityEngine.Object.CheckNullArgument (System.Object arg, System.String message)
	UnityEngine.Object.Instantiate[GameObject] (UnityEngine.GameObject original)
	DistantObject.FlareDraw.GenerateBodyFlares ()
	DistantObject.FlareDraw.Awake ()
	UnityEngine.GameObject:AddComponent(Type)
	AddonLoader:StartAddon(LoadedAssembly, Type, KSPAddon, Startup)
	AddonLoader:StartAddons(Startup)
	AddonLoader:OnLevelLoaded(Int32)
	AddonLoader:OnSceneLoaded(Scene, LoadSceneMode)
	UnityEngine.SceneManagement.SceneManager:Internal_SceneLoaded(Scene, LoadSceneMode)
[LOG 19:15:22.243] [AddonLoader]: Instantiating addon 'SettingsGui' from assembly 'DistantObject'
[LOG 19:15:22.245] [AddonLoader]: Instantiating addon 'VesselDraw' from assembly 'DistantObject'
[LOG 19:15:22.248] [AddonLoader]: Instantiating addon 'GravityTurner' from assembly 'GravityTurn'
[LOG 19:15:22.250] GravityTurn : GravityTurn: Awake -1257606
[LOG 19:15:22.253] [AddonLoader]: Instantiating addon 'FlightAppLauncher' from assembly 'KerbalEngineer'
[LOG 19:15:22.257] [AddonLoader]: Instantiating addon 'DisplayStack' from assembly 'KerbalEngineer'
[LOG 19:15:22.259] [AddonLoader]: Instantiating addon 'FlightEngineerCore' from assembly 'KerbalEngineer'
[LOG 19:15:22.262] [AddonLoader]: Instantiating addon 'KACFlight' from assembly 'KerbalAlarmClock'
[LOG 19:15:22.265] 10/24/2016 7:15:22 PM,KerbalAlarmClock,Awakening the KerbalAlarmClock-KACFlight
[LOG 19:15:22.268] 10/24/2016 7:15:22 PM,KerbalAlarmClock,Loading Settings
[LOG 19:15:22.278] 10/24/2016 7:15:22 PM,KerbalAlarmClock,Loading Transfer Modelling Data
[LOG 19:15:22.341] 10/24/2016 7:15:22 PM,KerbalAlarmClock,Transfer Modelling Data Load Complete
[LOG 19:15:22.343] 10/24/2016 7:15:22 PM,KerbalAlarmClock,Loading Sounds
[LOG 19:15:22.348] 10/24/2016 7:15:22 PM,KerbalAlarmClock,WarpRates:8
[LOG 19:15:22.350] 10/24/2016 7:15:22 PM,KerbalAlarmClock,API Ready
[LOG 19:15:22.351] [AddonLoader]: Instantiating addon 'TransferWindowPlannerFlight' from assembly 'TransferWindowPlanner'
[LOG 19:15:22.354] 10/24/2016 7:15:22 PM,TransferWindowPlanner,Awakening the TransferWindowPlanner (TWP)
[LOG 19:15:22.356] 10/24/2016 7:15:22 PM,TransferWindowPlanner,Loading Settings
[LOG 19:15:22.360] 10/24/2016 7:15:22 PM,TransferWindowPlanner,Skipping version check
[LOG 19:15:22.362] [PlanetariumCamera]: Focus: Kerbin
[LOG 19:15:22.365] [UIMasterController]: ShowUI
[LOG 19:15:23.750] ------------------- initializing flight mode... ------------------
[LOG 19:15:23.756] [ScenarioDestructibles]: Loading... 0 objects registered
[LOG 19:15:23.759] Loading Depletion Nodes
[LOG 19:15:23.760] DepNodeCount:  0
[LOG 19:15:23.761] Loading Biome Nodes
[LOG 19:15:23.763] BiomeNodeCount:  2
[LOG 19:15:23.764] Loading Planet Nodes
[LOG 19:15:23.765] PlanetNodeCount:  3
[LOG 19:15:23.767] 10/24/2016 7:15:23 PM,KerbalAlarmClock,BaseLoadDone. Alarms Count (Should be 0):0
[LOG 19:15:23.772] 10/24/2016 7:15:23 PM,KerbalAlarmClock,Found 0 Maneuver Nodes to deserialize
[LOG 19:15:23.774] 10/24/2016 7:15:23 PM,KerbalAlarmClock,Found 0 Maneuver Nodes to deserialize
[LOG 19:15:23.776] 10/24/2016 7:15:23 PM,KerbalAlarmClock,Found 0 Maneuver Nodes to deserialize
[LOG 19:15:23.778] 10/24/2016 7:15:23 PM,KerbalAlarmClock,Found 0 Maneuver Nodes to deserialize
[LOG 19:15:23.780] 10/24/2016 7:15:23 PM,KerbalAlarmClock,Found 0 Maneuver Nodes to deserialize
[LOG 19:15:23.782] 10/24/2016 7:15:23 PM,KerbalAlarmClock,Found 0 Maneuver Nodes to deserialize
[LOG 19:15:23.784] 10/24/2016 7:15:23 PM,KerbalAlarmClock,Found 0 Maneuver Nodes to deserialize
[LOG 19:15:23.785] 10/24/2016 7:15:23 PM,KerbalAlarmClock,Found 1 Maneuver Nodes to deserialize
[LOG 19:15:23.787] 10/24/2016 7:15:23 PM,KerbalAlarmClock,Found 0 Maneuver Nodes to deserialize
[LOG 19:15:23.789] 10/24/2016 7:15:23 PM,KerbalAlarmClock,Found 0 Maneuver Nodes to deserialize
[LOG 19:15:23.790] 10/24/2016 7:15:23 PM,KerbalAlarmClock,ScenarioLoadDone. Alarms Count:10
[LOG 19:15:24.004] Target vessel index: 63  vessel count: 64
[LOG 19:15:24.007] [FLIGHT GLOBALS]: Switching To Vessel RCS Fuel Depot Debris ---------------------- 
[LOG 19:15:24.009] setting new dominant body: Kerbin
FlightGlobals.mainBody: Kerbin
[LOG 19:15:24.011] Reference Frame: Rotating
[LOG 19:15:24.037] Camera Mode: AUTO
[LOG 19:15:25.600] all systems started
[LOG 19:15:25.608] GravityTurn : Starting
[LOG 19:15:25.612] GravityTurn : MechJeb assembly not found
[LOG 19:15:25.621] ScaleModList: listSize 205 maxListSize 428
[LOG 19:15:25.625] GravityTurn : Loading Vessel C:\Users\Escott O. Smith III\Desktop\KSP_win64\GameData\GravityTurn\Plugins/PluginData/GravityTurn\gt_launchdb_RCS Fuel Depot Debris_Kerbin.cfg
[WRN 19:15:25.631] File 'C:\Users\Escott O. Smith III\Desktop\KSP_win64\GameData\GravityTurn\Plugins/PluginData/GravityTurn\gt_launchdb_RCS Fuel Depot Debris_Kerbin.cfg' does not exist
[LOG 19:15:25.637] GravityTurn : Window loaded from C:\Users\Escott O. Smith III\Desktop\KSP_win64\GameData\GravityTurn\Plugins/PluginData/GravityTurn\gt_window_6378070.cfg
[LOG 19:15:25.643] GravityTurn : Window loaded from C:\Users\Escott O. Smith III\Desktop\KSP_win64\GameData\GravityTurn\Plugins/PluginData/GravityTurn\gt_window_6378071.cfg
[LOG 19:15:25.650] GravityTurn : Window loaded from C:\Users\Escott O. Smith III\Desktop\KSP_win64\GameData\GravityTurn\Plugins/PluginData/GravityTurn\gt_window_6378072.cfg
[LOG 19:15:25.656] GravityTurn : Window loaded from C:\Users\Escott O. Smith III\Desktop\KSP_win64\GameData\GravityTurn\Plugins/PluginData/GravityTurn\gt_window_548302.cfg
[LOG 19:15:25.701] GravityTurn : Window loaded from C:\Users\Escott O. Smith III\Desktop\KSP_win64\GameData\GravityTurn\Plugins/PluginData/GravityTurn\gt_window_6378074.cfg
[LOG 19:15:25.725] 10/24/2016 7:15:25 PM,KerbalAlarmClock,Searching for RSS
[LOG 19:15:25.730] 10/24/2016 7:15:25 PM,KerbalAlarmClock,Searching for KER
[LOG 19:15:25.731] 10/24/2016 7:15:25 PM,KerbalAlarmClock-KERWrapper,Attempting to Grab KER Types...
[LOG 19:15:25.737] 10/24/2016 7:15:25 PM,KerbalAlarmClock-KERWrapper,KER Version:1.1.2.1
[LOG 19:15:25.739] 10/24/2016 7:15:25 PM,KerbalAlarmClock-KERWrapper,Creating Wrapper Objects
[LOG 19:15:25.740] 10/24/2016 7:15:25 PM,KerbalAlarmClock-KERWrapper,p not NULL
[LOG 19:15:25.742] 10/24/2016 7:15:25 PM,KerbalAlarmClock-KERWrapper,BurnTimeProp Success: True
[LOG 19:15:25.744] 10/24/2016 7:15:25 PM,KerbalAlarmClock-KERWrapper,HalfBurnTimeProp Success: True
[LOG 19:15:25.745] 10/24/2016 7:15:25 PM,KerbalAlarmClock-KERWrapper,HasDeltaVProp Success: True
[LOG 19:15:25.747] 10/24/2016 7:15:25 PM,KerbalAlarmClock-KERWrapper,UpdateMethod Success: True
[LOG 19:15:25.749] 10/24/2016 7:15:25 PM,KerbalAlarmClock,Successfully Hooked KER
[LOG 19:15:25.750] 10/24/2016 7:15:25 PM,KerbalAlarmClock,Searching for VOID
[LOG 19:15:25.752] 10/24/2016 7:15:25 PM,KerbalAlarmClock-VOIDWrapper,Attempting to Grab VOID Types...
[LOG 19:15:25.758] 10/24/2016 7:15:25 PM,TransferWindowPlanner,Searching for RSS
[LOG 19:15:25.763] 10/24/2016 7:15:25 PM,TransferWindowPlanner-KACWrapper,Attempting to Grab KAC Types...
[LOG 19:15:25.768] 10/24/2016 7:15:25 PM,TransferWindowPlanner-KACWrapper,KAC Version:3.8.0.0
[LOG 19:15:25.773] 10/24/2016 7:15:25 PM,TransferWindowPlanner-KACWrapper,Got Assembly Types, grabbing Instance
[LOG 19:15:25.775] 10/24/2016 7:15:25 PM,TransferWindowPlanner-KACWrapper,Got Instance, Creating Wrapper Objects
[LOG 19:15:25.777] 10/24/2016 7:15:25 PM,TransferWindowPlanner-KACWrapper,Getting APIReady Object
[LOG 19:15:25.779] 10/24/2016 7:15:25 PM,TransferWindowPlanner-KACWrapper,Success: True
[LOG 19:15:25.780] 10/24/2016 7:15:25 PM,TransferWindowPlanner-KACWrapper,Getting Alarms Object
[LOG 19:15:25.782] 10/24/2016 7:15:25 PM,TransferWindowPlanner-KACWrapper,Success: True
[LOG 19:15:25.784] 10/24/2016 7:15:25 PM,TransferWindowPlanner-KACWrapper,Getting Alarm State Change Event
[LOG 19:15:25.786] 10/24/2016 7:15:25 PM,TransferWindowPlanner-KACWrapper,Getting Create Method
[LOG 19:15:25.788] 10/24/2016 7:15:25 PM,TransferWindowPlanner-KACWrapper,Getting Delete Method
[LOG 19:15:25.790] 10/24/2016 7:15:25 PM,TransferWindowPlanner-KACWrapper,Getting DrawAlarmAction
[LOG 19:15:25.792] 10/24/2016 7:15:25 PM,TransferWindowPlanner,Successfully Hooked the KAC
[LOG 19:15:25.794] 10/24/2016 7:15:25 PM,KerbalAlarmClock,Initializing Phase Angle Render
[LOG 19:15:25.835] 10/24/2016 7:15:25 PM,KerbalAlarmClock,Initializing EjectAngle Render
[LOG 19:15:25.876] 10/24/2016 7:15:25 PM,TransferWindowPlanner,Initializing Phase Angle Render
[LOG 19:15:25.917] 10/24/2016 7:15:25 PM,TransferWindowPlanner,Initializing EjectAngle Render
[WRN 19:15:25.964] [FlagDecal Warning!]: Flag quad object is given as FlagTransform, but has no renderer attached
[LOG 19:15:26.144] 10/24/2016 7:15:26 PM,KerbalAlarmClock,Vessel Change from 'No Vessel' to 'RCS Fuel Depot Debris'
[LOG 19:15:26.153] 10/24/2016 7:15:26 PM,KerbalAlarmClock,Active Vessel unreadable - resetting inqueue flag
[LOG 19:15:26.404] KerbalEngineer -> ActionMenu->OnDestroy
[LOG 19:15:26.405] KerbalEngineer -> FlightEngineerCore->OnDestroy
[LOG 19:15:26.407] KerbalEngineer -> ActionMenu->Awake
[LOG 19:15:26.408] KerbalEngineer -> FlightEngineerCore->Awake
[LOG 19:15:26.410] KerbalEngineer -> ActionMenu->Start
[LOG 19:15:26.411] KerbalEngineer -> FlightEngineerCore->Start
[LOG 19:15:26.434] 10/24/2016 7:15:26 PM,KerbalAlarmClock,Loading Textures
[LOG 19:15:26.491] 10/24/2016 7:15:26 PM,KerbalAlarmClock,Loaded Textures
[LOG 19:15:26.493] 10/24/2016 7:15:26 PM,TransferWindowPlanner,Loading Textures
[LOG 19:15:26.507] 10/24/2016 7:15:26 PM,TransferWindowPlanner,Configuring Styles
[WRN 19:15:26.524] [UiApp] Awake: CurrencyWidgetsApp
[WRN 19:15:26.526] [UiApp] Awake: ResourceDisplay
[WRN 19:15:26.528] [UiApp] Awake: KSPedia
[LOG 19:15:26.530] [ApplicationLauncher] OnSceneLoadedGUIReady: scene FLIGHT ShouldBeVisible() True ShouldBeOnTop() True iIsPositionedAtTop True
[LOG 19:15:26.536] ScaleModList: listSize 41 maxListSize 510
[LOG 19:15:26.539] ScaleModList: listSize 82 maxListSize 510
[LOG 19:15:26.560] ScaleModList: listSize 123 maxListSize 510
[LOG 19:15:26.584] ScaleModList: listSize 164 maxListSize 510
[ERR 19:15:26.587] Distant Object Enhancement v1.8.0 -- Failed to load toolbar_disabled_38

[WRN 19:15:26.590] [KnowledgeBase] OnAppLauncherReady 36374
[LOG 19:15:26.618] [UIApp] OnDestroy: ContractsApp
[LOG 19:15:26.625] ScaleModList: listSize 205 maxListSize 510
[LOG 19:15:26.627] 10/24/2016 7:15:26 PM,KerbalAlarmClock,Adding DrawGUI to PostRender Queue
[LOG 19:15:26.630] 10/24/2016 7:15:26 PM,KerbalAlarmClock,Skipping version check
[LOG 19:15:26.639] [MessageSystem] Reposition 0.02 36375
[LOG 19:15:27.082] [FlightIntegrator]: Reloaded drag cube for zeroed cube root part stackDecoupler (RCS Fuel Depot Debris) on vessel RCS Fuel Depot Debris
[LOG 19:15:27.087] [FlightIntegrator]: Vessel RCS Fuel Depot Debris has been unloaded 942.359978936613, applying analytic temperature 273.137393970432
[LOG 19:15:27.597] [PlanetariumCamera]: Focus: RCS Fuel Depot Debris
[LOG 19:15:28.053] [UIApp] Adding ResourceDisplay to Application Launcher
[LOG 19:15:28.058] ScaleModList: listSize 205 maxListSize 469
[LOG 19:15:28.060] [UIApp] Adding ResourceDisplay to Application Launcher
[LOG 19:15:28.063] ScaleModList: listSize 205 maxListSize 428
[WRN 19:15:28.552] [ResourceDisplay] OnAppStarted(): id: -1276268
[LOG 19:15:28.555] [GenericAppFrame] Reposition 0.18 36379
[WRN 19:15:28.557] [ResourceDisplay] OnAppStarted(): id: 115642
[LOG 19:15:28.559] ResourceDisplay already exist, destroying this instance
[LOG 19:15:28.561] [UIApp] OnDestroy: ResourceDisplay
[LOG 19:15:28.563] ScaleModList: listSize 205 maxListSize 428
[LOG 19:15:28.585] CURRENCY WIDGET False False True
[LOG 19:15:28.592] [UIApp] OnDestroy: CurrencyWidgetsApp
[LOG 19:15:28.608] [UIApp] Adding KSPedia to Application Launcher
[LOG 19:15:28.612] ScaleModList: listSize 205 maxListSize 428
[LOG 19:15:28.769] Flight State Captured
[LOG 19:15:28.771] Saving Achievements Tree...
[LOG 19:15:28.773] Saving Achievements Tree...
[LOG 19:15:28.775] Saving Achievements Tree...
[LOG 19:15:28.777] Saving Achievements Tree...
[LOG 19:15:28.779] Saving Achievements Tree...
[LOG 19:15:28.781] Saving Achievements Tree...
[LOG 19:15:28.783] Saving Achievements Tree...
[LOG 19:15:28.796] [MessageSystem] Save Messages
[LOG 19:15:29.186] Game State Saved as persistent
[LOG 19:15:29.773] Unpacking RCS Fuel Depot Debris
[LOG 19:15:34.173] [FLIGHT GLOBALS]: Switching To Vessel Lab Station One ---------------------- 
[LOG 19:15:34.179] Flight State Captured
[LOG 19:15:34.182] Saving Achievements Tree...
[LOG 19:15:34.183] Saving Achievements Tree...
[LOG 19:15:34.185] Saving Achievements Tree...
[LOG 19:15:34.187] Saving Achievements Tree...
[LOG 19:15:34.189] Saving Achievements Tree...
[LOG 19:15:34.190] Saving Achievements Tree...

Would go through and censor all instances of my name, but just too many for that to be practical.

Link to comment
Share on other sites
Padishar

Padishar

Posted
Posted
19 hours ago, Paaaad said:

Getting game crashes when trying to "Switch to Target", reproducible, if a bit unpredictable.

Yes, this was reported back during the pre-release:

I have looked into this a little since then and have found a couple of things about how it works that look a bit dodgy so there will be another test version with a possible fix soon (I still haven't been able to reproduce the crash so won't be able to tell if the fixes work)...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing
×
×
  • Create New...