(0.23) Wayland Corp. Development and released download Thread (new parts)

[Wormhol3]

When will the Pegasus be updated for .20?

[Devo]

When will the Pegasus be updated for .20?

Soon

I am adding more things to the pack, I have waited this long I might as well make it what I wanted to be, it has a rover that goes with it and a new cargo bay type.

[viperwolf]

will the Station Ring Pack work in 20.+ if wrapped?

[Devo]

will the Station Ring Pack work in 20.+ if wrapped?

Yes, they are simply structural parts and if placed in the parts folder the legacy structure should apply and they should work, I havent tested them but I see no reason, they hold no special configuration that would have broken.

Pegasus X-3 update:

I am re-working the entire PegasusX-2!

I have completed the conversion to ksp0.20 for the Px-2, I am just building some example craft files now and it will be uploaded. The PX-3 is more a complete system. It's based on the PX-2 with some major modifications, so much that it really got to be another vessel.

I am working on some new infernal robotics parts that should really give it some bang, mainly the mech legs.. to have a craft that can deploy a mech walker and actually have a mech walker in it, now that would be cool. Just baby steps right now, literally lol or it falls over pretty easily.

If you want to imagine this thing walking in the game, think AT-ST from star wars, they bob sideways like that for a reason, its very hard to keep the weight central and balanced while the thing is walking, thats my big challenge right now. This is not really a wayland part, this is more for infernal robotics and MSI new animator system..

Edited July 9, 2013 by Devo

[Mekan1k]

What happened to the uniwheel mod?

[Devo]

What happened to the uniwheel mod?

Still being made, just alot harder than first thought. It has alot of issues, like tending to kick kerbals out mid journey, things like that, something with the main kerbal collider getting hit by the wheel. I just gave it a rest for a week or so, needed to get a fresh head.

[Tommygun]

Be careful, I think the Kerbals are the Ewoks of the Mech world.

[viperwolf]

Ah ok DEVO thank you for the reply. Going to try tonight.

EDIT: you were correct, i wrapped the parts and placed them in with the hyper ring folder. Works great.

Edited July 10, 2013 by viperwolf

[Hawkstorm]

Nice to know your working on the Pegasus.

Would perhaps be nice to see a larger version that can deploy larger payloads perhaps, and that keeps its excellent flight characteristics, the Mumech engine interface makes it a doddle to fly and use. (Bout the only One you've made I can actually fly. LOL).

It would also perhaps be nice to see your mods so they conform and work together in design and purpose, and on bigger stuff like the WT51 perhaps providing a selection of bigger welded sections to avoid the wobble problem. (And well all those joints just spoil the looks anyway).

You produce some of the best mods for this game, it would be nice to see more of your own work rather than just Sci-Fi remake stuff (your rather good at it I think).

[Devo]

Nice to know your working on the Pegasus.

Would perhaps be nice to see a larger version that can deploy larger payloads perhaps, and that keeps its excellent flight characteristics, the Mumech engine interface makes it a doddle to fly and use. (Bout the only One you've made I can actually fly. LOL).

It would also perhaps be nice to see your mods so they conform and work together in design and purpose, and on bigger stuff like the WT51 perhaps providing a selection of bigger welded sections to avoid the wobble problem. (And well all those joints just spoil the looks anyway).

You produce some of the best mods for this game, it would be nice to see more of your own work rather than just Sci-Fi remake stuff (your rather good at it I think).

Thanks, funny you mention larger payloads...

Just finished one of the new parts for the pegasus...

Large enough for a 2.5m payload.. and still flies like a dream. 180 degreen sliding barrel type cargo bay..

Open..

Close

[sirkut]

That is nice Devo!

[rosenkranz]

I love that new hyper ring. Someone else asked this, but where the 2.5m and 1.25m engines are suppose to go, there are no nodes. Using radial attachments now but that feels like a bandaid. Any chance of a config with those nodes? pretty please

Edit: nm, I see you changed the verbage on spaceport and this is as intended. But it would be nice

Edited July 10, 2013 by rosenkranz

[Devo]

I love that new hyper ring. Someone else asked this, but where the 2.5m and 1.25m engines are suppose to go, there are no nodes. Using radial attachments now but that feels like a bandaid. Any chance of a config with those nodes? pretty please

Edit: nm, I see you changed the verbage on spaceport and this is as intended. But it would be nice

I was just lazy sorry, I didn't add nodes there. It was a bit of a rush piece Leonov asked me to make for him, I figured he could add the radial node and put whatever he wanted on there. I think maybe I rely on the node too much lol, I use it for so many things.

Anyway, here is a video of how to unload the new cargo bay by using the vtol engines

[sirkut]

Awesome. Looks like an inverted pregnant guppy.

[OopsThatNotWork]

Haha, I agree , but what in the world made you think of that!

[Devo]

Haha, I agree , but what in the world made you think of that!

nothing really, I basically just fit a 2.7m diameter cylynder in the normal cargo bay and said "im going to make this fit" and of course, it didn't but hey, why waste it

[FreeFall]

Devo- I am so glad to see you are updating the Pegasus. Due to where the Army has had me I kinda missed everything since .18 and when I saw the Pegasus.. and realized it wouldn't work...

I was in fact sitting here cracking my knuckles and reading up on how to upgrade a mod for use in 20. when I saw the info. Looking forward to seeing the 'old one' coming soon, and the next generation when you get done with it.

Thanks for saving me the work guess ill see what happens when I part wrap the Eagle. If i need to do more than a wrap, I'll read more

EDIT: So far so good.. everything but the engines was a first time go. forum surfing to figure out why they wont load/what needs to change

Thank you for all the amazing stuff!

Edited July 10, 2013 by FreeFall

[Dave7]

For those wanting nodes for the rings, I added these to the cfg:

node_stack_topr1 = 7.0, 1.637, 0.0, 0.0, 1.0, 0.0, 2

node_stack_topr2 = 6.6, 1.637, 2.19, 0.0, 1.0, 0.0, 1

node_stack_topr3 = 6.6, 1.637, -2.17, 0.0, 1.0, 0.0, 1

node_stack_topl1 = -7.0, 1.637, 0.0, 0.0, 1.0, 0.0, 2

node_stack_topl2 = -6.6, 1.637, 2.19, 0.0, 1.0, 0.0, 1

node_stack_topl3 = -6.6, 1.637, -2.17, 0.0, 1.0, 0.0, 1

node_stack_bottomr1 = 7.0, -1.637, 0.0, 0.0, 1.0, 0.0, 2

node_stack_bottomr2 = 6.6, -1.637, 2.19, 0.0, 1.0, 0.0, 1

node_stack_bottomr3 = 6.6, -1.637, -2.17, 0.0, 1.0, 0.0, 1

node_stack_bottoml1 = -7.0, -1.637, 0.0, 0.0, 1.0, 0.0, 2

node_stack_bottoml2 = -6.6, -1.637, 2.19, 0.0, 1.0, 0.0, 1

node_stack_bottoml3 = -6.6, -1.637, -2.17, 0.0, 1.0, 0.0, 1

That mech is nice Devo, I was thinking the other day someone should try that. Should have known it would be you after seeing that 3d printing. Nice job. Pegasus looks good too.

[viperwolf]

For those wanting nodes for the rings, I added these to the cfg:

node_stack_topr1 = 7.0, 1.637, 0.0, 0.0, 1.0, 0.0, 2

node_stack_topr2 = 6.6, 1.637, 2.19, 0.0, 1.0, 0.0, 1

node_stack_topr3 = 6.6, 1.637, -2.17, 0.0, 1.0, 0.0, 1

node_stack_topl1 = -7.0, 1.637, 0.0, 0.0, 1.0, 0.0, 2

node_stack_topl2 = -6.6, 1.637, 2.19, 0.0, 1.0, 0.0, 1

node_stack_topl3 = -6.6, 1.637, -2.17, 0.0, 1.0, 0.0, 1

node_stack_bottomr1 = 7.0, -1.637, 0.0, 0.0, 1.0, 0.0, 2

node_stack_bottomr2 = 6.6, -1.637, 2.19, 0.0, 1.0, 0.0, 1

node_stack_bottomr3 = 6.6, -1.637, -2.17, 0.0, 1.0, 0.0, 1

node_stack_bottoml1 = -7.0, -1.637, 0.0, 0.0, 1.0, 0.0, 2

node_stack_bottoml2 = -6.6, -1.637, 2.19, 0.0, 1.0, 0.0, 1

node_stack_bottoml3 = -6.6, -1.637, -2.17, 0.0, 1.0, 0.0, 1

That mech is nice Devo, I was thinking the other day someone should try that. Should have known it would be you after seeing that 3d printing. Nice job. Pegasus looks good too.

Where in the cfg do you put this? Sorry im not very good at this stuff.

[Devo]

For those wanting nodes for the rings, I added these to the cfg:

node_stack_topr1 = 7.0, 1.637, 0.0, 0.0, 1.0, 0.0, 2

node_stack_topr2 = 6.6, 1.637, 2.19, 0.0, 1.0, 0.0, 1

node_stack_topr3 = 6.6, 1.637, -2.17, 0.0, 1.0, 0.0, 1

node_stack_topl1 = -7.0, 1.637, 0.0, 0.0, 1.0, 0.0, 2

node_stack_topl2 = -6.6, 1.637, 2.19, 0.0, 1.0, 0.0, 1

node_stack_topl3 = -6.6, 1.637, -2.17, 0.0, 1.0, 0.0, 1

node_stack_bottomr1 = 7.0, -1.637, 0.0, 0.0, 1.0, 0.0, 2

node_stack_bottomr2 = 6.6, -1.637, 2.19, 0.0, 1.0, 0.0, 1

node_stack_bottomr3 = 6.6, -1.637, -2.17, 0.0, 1.0, 0.0, 1

node_stack_bottoml1 = -7.0, -1.637, 0.0, 0.0, 1.0, 0.0, 2

node_stack_bottoml2 = -6.6, -1.637, 2.19, 0.0, 1.0, 0.0, 1

node_stack_bottoml3 = -6.6, -1.637, -2.17, 0.0, 1.0, 0.0, 1

That mech is nice Devo, I was thinking the other day someone should try that. Should have known it would be you after seeing that 3d printing. Nice job. Pegasus looks good too.

Thank you very much for that!

I will add them to the pack on spaceport and update it.

[KhaosCorp]

Where in the cfg do you put this? Sorry im not very good at this stuff.

Kinda near the top, it has a node already, so these should go just after that entry.

[Dave7]

Thank you very much for that!

I will add them to the pack on spaceport and update it.

No problem, you may need to tweak them a little, I got it eyeball close with my not so good vision.

[Devo]

No problem, you may need to tweak them a little, I got it eyeball close with my not so good vision.

Hey, close enough is better than not at all

[viperwolf]

Kinda near the top, it has a node already, so these should go just after that entry.

Ah ok thank you, and thank you DAVE7 for the nodes

[rosenkranz]

Putting those nodes in, I ran into an interesting problem. While the center nodes are rock solid, the outer nodes (due to the distance from CoM I guess) suffer the wobbles something fierce.

I tried increasing the impact tolerance and the breaking forces. That helped a little, but not a lot. So, I guess distance to the CoM is the major cause of wobbly rocket syndrome?

On the other hand radial attachments stuck to the surface (rather than an offical node) are much more stable and things attached to their nodes are likewise, more stable. Unity is a very weird animal.