DMSP Posted June 1, 2015 Share Posted June 1, 2015 http://i.imgur.com/Z5QYlQT.jpghttp://i.imgur.com/St4WVEl.jpghttp://i.imgur.com/kY3vsyD.jpgwooping 24.ooo deltaV haha..I'm stunned...Some people are born to build... Quote Link to comment Share on other sites More sharing options...
Guest Posted June 1, 2015 Share Posted June 1, 2015 (edited) I'm stunned...Some people are born to build...Thanks but tbh there's quite a lot of tricks involved you know, one of the most useful I use is to offset while angle snapping to rail a part in line with its root. Edited June 1, 2015 by RevanCorana Quote Link to comment Share on other sites More sharing options...
Frank_G Posted June 2, 2015 Share Posted June 2, 2015 You COULD Try RAPIERing it If your flight profile is good enough, you can crack 1200m/s with the turbo before it cuts at 23km or 1400m/s with the RAPIERs before they cut out at 26km Tip 1 RAM intake is overkill enough for a turbo, and slight more need for the RAPIERair hogging = NahTry fuel efficient 40 degrees to 10km then go low on variable 5-10 degrees to Mach break until 19km, then pull up to 20 degrees to avoid burns, but by that time you should have gotten a good 1200m/s or an even better 1400m/sTry adding an engine pre-cooler and the R.A.P.I.E.R will work in airbrathing mode up to a flight ceiling of close to 30 km. However SSTO efficiency is overall reduced, especially with small designs. I am still trying to reproduce my Arrowhead SSTO, which was so successful in .90 (check sig for pictures and craftfile). Quote Link to comment Share on other sites More sharing options...
DMSP Posted June 2, 2015 Share Posted June 2, 2015 (edited) What I am doing:-Starting a new project, the "Delta Clipper".I already have it almost worked out.-Also making a Soyuz 2 Rocket modeled after this:-Making a new series of lifters, one of which will have a space on Stage 2 for 8 small "Hitchhiker" sats.-Working on a Cupcake... style atmospheric only dropship for Laythe and Kerbin. Works well and can land on water. It is under testing but the final version should be able to carry 10+ tons.-Testing Rune's base 1.0-Building and Atlas V 551 with a Star-48 booster based on this:Oh, also, I'm working on a deep-space ComSat network, and teaching my sis KSP (Those two are linked, she tests the controls and I send the craft out as SunSats after. Works very well sctually, and I mostly use the Mun for slingshots out. It taught me some things too! I skimmed within loading range of my Mun base with the most recent probe). Edited June 2, 2015 by DMSP Added Atlas V 551 and added more info+Photo. Quote Link to comment Share on other sites More sharing options...
Rune Posted June 2, 2015 Share Posted June 2, 2015 What I am doing:-Starting a new project, the "Delta Clipper".I already have it almost worked out.-Also making a Soyuz 2 Rocket modeled after this:http://upload.wikimedia.org/wikipedia/commons/thumb/7/73/Soyuz_2_metop.jpg/270px-Soyuz_2_metop.jpg-Making a new series of lifters, one of which will have a space on Stage 2 for 8 small "Hitchhiker" sats.-Working on a Cupcake... style atmospheric only dropship for Laythe and Kerbin. Works well and can land on water. It is under testing but the final version should be able to carry 10+ tons.Oh, also, I'm working on a deep-space ComSat network. Also teaching my sis KSP.And getting more to-do stuff on top. Rune. Welcome to my base testing team! So far, it's mostly you. Quote Link to comment Share on other sites More sharing options...
DMSP Posted June 2, 2015 Share Posted June 2, 2015 And getting more to-do stuff on top. Rune. Welcome to my base testing team! So far, it's mostly you.Heh.Updated though with my Atlas V 551 and testing for you! Quote Link to comment Share on other sites More sharing options...
DMSP Posted June 2, 2015 Share Posted June 2, 2015 I literally just finished the Atlas V 551. New Horizons style probe. It has a Kerbal twist though and some bunouses. Fully capable of Eeloo Flyby or even Eeloo Insertion.I'll upload it tomorrow. Quote Link to comment Share on other sites More sharing options...
Guest Posted June 2, 2015 Share Posted June 2, 2015 A soil analyzer rover (with mako jumps ) for finding best mining spots after an orbital scan.And the *almost* completed universal mining rig with burner ready to go Quote Link to comment Share on other sites More sharing options...
Shaun Posted June 2, 2015 Share Posted June 2, 2015 The Sea Vixen! My next Replica Quote Link to comment Share on other sites More sharing options...
VR_Dev Posted June 2, 2015 Share Posted June 2, 2015 Final touches on the f22 and I'll hopefully release it tomorrow. Also maybe the stock/no VTOL f35.And I didn't think it would be possible but I've got a pretty solid start on a realistic VTOL f-35. It's gonna need IR for the rear engine and bottom doors, unless someone knows of a trick I could use for either. There's an intake under the airbrake that is exposed when opened. Quote Link to comment Share on other sites More sharing options...
ScriptKitt3h Posted June 2, 2015 Share Posted June 2, 2015 So many darn WIPs...So little time. Quote Link to comment Share on other sites More sharing options...
Zucal Posted June 3, 2015 Share Posted June 3, 2015 (edited) The Constellation project goes slowly but surely, there's so much to do. I'm eager to see others have come up with, there's so many pieces and so little parts!-The MTV is done, barely any work was needed to make it assemble in orbit.-Ares 1 is having TWR issues, but nothing unsolvable. Not started Ares V yet.-The Mars landers are well on their way, I'm having issues stowing their legs without them protruding out of the fairings.-Orion is being redone, I didn't like the version I did for the standalone MTV.-I haven't started Altair yet, MJ's version is going to be very hard to beat. Edited June 3, 2015 by Zucal grammar Quote Link to comment Share on other sites More sharing options...
Majorjim! Posted June 3, 2015 Share Posted June 3, 2015 The Constellation project goes slowly but surely, there's so much to do. I'm eager to see others have come up with, there's so many pieces and so little parts!-The MTV is done, barely any work was needed to make it assemble in orbit.-Ares 1 is having TWR issues, but nothing unsolvable. Not started Ares V yet.-The Mars landers are well on their way, I'm having issues stowing the less without them protruding out of the fairings.-Orion is being redone, I didn't like the version I did for the standalone MTV.-I haven't started Altair yet, MJ's version is going to be very hard to beat.I cant wait to see what you come up with Zucal! There are so few stock full constellation mission on the forum. How are the landers coming? Quote Link to comment Share on other sites More sharing options...
Yukon0009 Posted June 3, 2015 Share Posted June 3, 2015 Working on a Cosntell as well, heavy work will come after exams finish (nearly).Built a white/black aeroshell, Ares I coming along nicely.I had an Altair as well, but it sure won't be MJ quality. Quote Link to comment Share on other sites More sharing options...
Majorjim! Posted June 3, 2015 Share Posted June 3, 2015 Working on a Cosntell as well, heavy work will come after exams finish (nearly).Built a white/black aeroshell, Ares I coming along nicely.I had an Altair as well, but it sure won't be MJ quality.Ooh are you using a custom fairing like the good old days? I prefer them over the travesty that is Squads stock fairings but it would push up the part count too high.. Quote Link to comment Share on other sites More sharing options...
Yukon0009 Posted June 3, 2015 Share Posted June 3, 2015 64 parts Quote Link to comment Share on other sites More sharing options...
Columbia Posted June 3, 2015 Share Posted June 3, 2015 Testing an Orion EFT-1/ Delta IV Replica.It's a little too wobbly. Quote Link to comment Share on other sites More sharing options...
Guest Posted June 3, 2015 Share Posted June 3, 2015 BigSSTO? Quote Link to comment Share on other sites More sharing options...
Majorjim! Posted June 3, 2015 Share Posted June 3, 2015 64 partshttp://i1383.photobucket.com/albums/ah315/Yukon0009/screenshot2522_zpskzyb86ih.pngInteresting! At least with custom fairings you have some choice as to how they operate. I like the idea of attempting a black and White fairing, good job man, I know how tricky that is. Quote Link to comment Share on other sites More sharing options...
DMSP Posted June 3, 2015 Share Posted June 3, 2015 What I am doing:-Starting a new project, the "Delta Clipper".I already have it almost worked out.-Also making a Soyuz 2 Rocket modeled after this:http://upload.wikimedia.org/wikipedia/commons/thumb/7/73/Soyuz_2_metop.jpg/270px-Soyuz_2_metop.jpg-Making a new series of lifters, one of which will have a space on Stage 2 for 8 small "Hitchhiker" sats.-Working on a Cupcake... style atmospheric only dropship for Laythe and Kerbin. Works well and can land on water. It is under testing but the final version should be able to carry 10+ tons.-Testing Rune's base 1.0-Built Atlas V 551, Star-48 SRB, and New Horizons replica.-Starting a constellation mission. I'll only make the landers, the Dragon V2 and Dragon Rider will be built by others (One has been built).Oh, also, I'm working on a deep-space ComSat network, and teaching my sis KSP (Those two are linked, she tests the controls and I send the craft out as SunSats after. Works very well sctually, and I mostly use the Mun for slingshots out. It taught me some things too! I skimmed within loading range of my Mun base with the most recent probe).Finished the Atlas V 551, added Constellation. Quote Link to comment Share on other sites More sharing options...
ZomBearUA Posted June 3, 2015 Share Posted June 3, 2015 Hello, my stock replica Space Shuttle Quote Link to comment Share on other sites More sharing options...
Yukon0009 Posted June 3, 2015 Share Posted June 3, 2015 I'm building a DragonRider, want help? Quote Link to comment Share on other sites More sharing options...
Majorjim! Posted June 3, 2015 Share Posted June 3, 2015 Finished the Atlas V 551, added Constellation.Cool! can we see the Atlas? Ooh, and Space X isn't/wasn't part of the proposed constellation mission. Quote Link to comment Share on other sites More sharing options...
Yukon0009 Posted June 3, 2015 Share Posted June 3, 2015 Hello, my stock replica Space Shuttlehttps://pp.vk.me/c628416/v628416550/5b8b/T5fTEwffmd0.jpghttps://pp.vk.me/c628416/v628416550/5b6d/BXnuEC7Vssk.jpghttps://pp.vk.me/c628416/v628416550/5b81/ypl3FVmo2Ng.jpgThat.Looks.Epic. Quote Link to comment Share on other sites More sharing options...
Rune Posted June 3, 2015 Share Posted June 3, 2015 Hello, my stock replica Space Shuttlehttps://pp.vk.me/c628416/v628416550/5b8b/T5fTEwffmd0.jpghttps://pp.vk.me/c628416/v628416550/5b6d/BXnuEC7Vssk.jpghttps://pp.vk.me/c628416/v628416550/5b81/ypl3FVmo2Ng.jpgWow. So much detail! And such good looking detail!Rune. I'm amazed. Is the whole stack a WiP? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.