MrWizerd Posted July 18, 2014 Share Posted July 18, 2014 It worked for me, I have not fully tested functionality however Link to comment Share on other sites More sharing options...
codepoet Posted July 18, 2014 Author Share Posted July 18, 2014 Thanks for checking and reporting - my gaming rig is still in boxes, and I am in no position to start fixing up mods in a hurry ATM! Link to comment Share on other sites More sharing options...
munseeker Posted July 18, 2014 Share Posted July 18, 2014 I have one strange phenomenon in 0.24 that I'm still not able to track down to a specific mod, but I suspect it might be CLS: I use it together with Kerbal Crew Transfer and the contextual menu for each docking port shows three entries for "open/close hatch" instead of one. Minor issue, but it makes the menus pretty long.Other than that just want to mention how much I appreciate your work on CLS - that mod helps so much with game immersion. Great work! Link to comment Share on other sites More sharing options...
codepoet Posted July 19, 2014 Author Share Posted July 19, 2014 I have one strange phenomenon in 0.24 that I'm still not able to track down to a specific mod, but I suspect it might be CLS: I use it together with Kerbal Crew Transfer and the contextual menu for each docking port shows three entries for "open/close hatch" instead of one. Minor issue, but it makes the menus pretty long.Other than that just want to mention how much I appreciate your work on CLS - that mod helps so much with game immersion. Great work!Are you using an upgraded save file or a new one? If you are able to, it would be helpful to know if the problem happens for you on either / both of these. Link to comment Share on other sites More sharing options...
munseeker Posted July 19, 2014 Share Posted July 19, 2014 (edited) Are you using an upgraded save file or a new one? If you are able to, it would be helpful to know if the problem happens for you on either / both of these.Wow - great guess! I didn't notice when I wrote the original message, but you are right, I see the triple-"open/close hatch" options only for craft that I built in .23.5 - I upgraded that save file to .24 and ships (or even components of ships) built in .24 don't have this issue. I have a Mun transporter that was built in .23.5 and the internal docking ports have triple-hatch-options, but the attached Mun lander built in .24 has docking ports that have only the expected single open/close hatch option.EDIT: I also just now upgraded to the latest .24-compiled Kerbal Crew Transfer and that does not change this situation, so I guess this is really CLS-related. Edited July 19, 2014 by munseeker Link to comment Share on other sites More sharing options...
codepoet Posted July 19, 2014 Author Share Posted July 19, 2014 Wow - great guess! I didn't notice when I wrote the original message, but you are right, I see the triple-"open/close hatch" options only for craft that I built in .23.5 - I upgraded that save file to .24 and ships (or even components of ships) built in .24 don't have this issue. I have a Mun transporter that was built in .23.5 and the internal docking ports have triple-hatch-options, but the attached Mun lander built in .24 has docking ports that have only the expected single open/close hatch option.EDIT: I also just now upgraded to the latest .24-compiled Kerbal Crew Transfer and that does not change this situation, so I guess this is really CLS-related.Thanks for checking.If you have a game with the triple hatch open problem - what happens if you same that game and then reload it? Does the problem persist? If it does I would be grateful if you could send me a copy of the save file so I can take a look. I will send you my email address in a PM. Link to comment Share on other sites More sharing options...
MacMan131 Posted July 24, 2014 Share Posted July 24, 2014 I have just got Connected Living Space and applied it to some of my old saves. The game did not seem to recognise that the pods where connected http://imgur.com/a/8w4CX. Is there any way to update my old saves so that they will work Connected Living Space? Link to comment Share on other sites More sharing options...
codepoet Posted July 25, 2014 Author Share Posted July 25, 2014 I have just got Connected Living Space and applied it to some of my old saves. The game did not seem to recognise that the pods where connected http://imgur.com/a/8w4CX. Is there any way to update my old saves so that they will work Connected Living Space?Are you sure that you have got module manager installed? From what you posted it looks as if none of the CLS configuration has been read in. Link to comment Share on other sites More sharing options...
codepoet Posted July 31, 2014 Author Share Posted July 31, 2014 Updated the OP for 1.0.8.0 release Link to comment Share on other sites More sharing options...
diomedea Posted July 31, 2014 Share Posted July 31, 2014 Excellent. Very happy to find you are keeping this mod current, I certainly want to keep using it . Link to comment Share on other sites More sharing options...
codepoet Posted July 31, 2014 Author Share Posted July 31, 2014 I do not want it to die, but I do not have the time to do exciting new stuff with it. I am hoping the it is becoming sufficiently established and supported by other mods, that it is the other mods that can do exciting new stuff with it. Link to comment Share on other sites More sharing options...
munseeker Posted July 31, 2014 Share Posted July 31, 2014 Great news! Love this mod, great to increase game immersion if you are building large crafts and stations. Thanks for your work! Link to comment Share on other sites More sharing options...
Sarge18 Posted August 1, 2014 Share Posted August 1, 2014 For some reason, I'm having no luck with Ship Manifest moving Kerbals between modules - all the tunnel space is correct, hatches are open. Configs are correct, I've even added a few to try them out. Same in Career or Sandbox. If I turn off CLS in Ship Manifest, I can move them around. Any ideas? Link to comment Share on other sites More sharing options...
sumghai Posted August 5, 2014 Share Posted August 5, 2014 codepoet, you may remove the SDHI config from your next release of CLS, as SDHI SMS V2.0+ now natively supports it Link to comment Share on other sites More sharing options...
codepoet Posted August 5, 2014 Author Share Posted August 5, 2014 codepoet, you may remove the SDHI config from your next release of CLS, as SDHI SMS V2.0+ now natively supports it Thanks for letting me know Link to comment Share on other sites More sharing options...
MrWizerd Posted August 7, 2014 Share Posted August 7, 2014 I have an issue were CLS brought up the debug console and it wont go away even after I restart the game. It isnt showing any failures on boot it just wont go away, and the CLS button which is now on the native toolbar does not give me any options to modify CLS its just a blank screen... I would like to move it back to the other toolbar and stuff and turn off the debug window but cant. Any ideas? Link to comment Share on other sites More sharing options...
codepoet Posted August 7, 2014 Author Share Posted August 7, 2014 Sorry about this. I am not quite sure what you mean when you say that "CLS brought up the debug console". Could you provide step by step instructions for reproducing the problem, and I will take a look at it?Thanks Link to comment Share on other sites More sharing options...
MrWizerd Posted August 7, 2014 Share Posted August 7, 2014 Sorry I take it back... Ignore my stupid statements I apparently cannot read it was a ship manifest debug window, that was talking about CLS I checked it a few times trying to figure it out but I guess I can't see the obvious in front of me HAHAHA ... thanks for the quick response and sorry again! Link to comment Share on other sites More sharing options...
SlimJim89 Posted August 19, 2014 Share Posted August 19, 2014 Would you kindly add CLS configs for the Near Future parts, mainly the construction parts? That would be awesome, or you could show me a sample on how to add a module for the parts, and I'll deal with it myself! Link to comment Share on other sites More sharing options...
codepoet Posted August 19, 2014 Author Share Posted August 19, 2014 There are example configs that ship with CLS. There is also a HOWTO document that describes what the config options do. If you get Near Future parts working with CLS do let me (or the mod author) have a copy of the .cfg and it can be shipped with a future release. Link to comment Share on other sites More sharing options...
sharpspoonful Posted August 21, 2014 Share Posted August 21, 2014 Hey there, I didnt see it in the README, but how do I close the debug menu? Even after a new download and restart, it opens the debug menu on load. Link to comment Share on other sites More sharing options...
codepoet Posted August 22, 2014 Author Share Posted August 22, 2014 There is no debug menu provided by CLS. I think you might be referring to a Ship Manifest feature. Try asking on the ShipManifest thread. Link to comment Share on other sites More sharing options...
KerbinDallas Posted August 22, 2014 Share Posted August 22, 2014 Hey here's a cfg for Near Future command pods and the service container:@PART[inlineCmdPod]:HAS[!MODULE[ModuleConnectedLivingSpace]]{ MODULE { name = ModuleConnectedLivingSpace passable = true }}@PART[mk3-9pod]:HAS[!MODULE[ModuleConnectedLivingSpace]]{ MODULE { name = ModuleConnectedLivingSpace passable = true }}@PART[utilityCabin]:HAS[!MODULE[ModuleConnectedLivingSpace]]{ MODULE { name = ModuleConnectedLivingSpace passable = true }}I saw on the last page someone asked for the cfg for the construction parts? I wasn't sure what was meant by that as they don't look passable to me but hopefully this helps anyway. Link to comment Share on other sites More sharing options...
codepoet Posted August 22, 2014 Author Share Posted August 22, 2014 Hey here's a cfg for Near Future command pods and the service container:@PART[inlineCmdPod]:HAS[!MODULE[ModuleConnectedLivingSpace]]{ MODULE { name = ModuleConnectedLivingSpace passable = true }}@PART[mk3-9pod]:HAS[!MODULE[ModuleConnectedLivingSpace]]{ MODULE { name = ModuleConnectedLivingSpace passable = true }}@PART[utilityCabin]:HAS[!MODULE[ModuleConnectedLivingSpace]]{ MODULE { name = ModuleConnectedLivingSpace passable = true }}I saw on the last page someone asked for the cfg for the construction parts? I wasn't sure what was meant by that as they don't look passable to me but hopefully this helps anyway.Thanks for this I have asked the author of the near future mod if they are willing to ship it with their mod. If they are not then I will bundle it into the next release of CLS. Link to comment Share on other sites More sharing options...
Jagzeplin Posted August 25, 2014 Share Posted August 25, 2014 how does CLS effect efficiency? Link to comment Share on other sites More sharing options...
Recommended Posts