Dire_Squid Posted September 1, 2014 Share Posted September 1, 2014 Uhm, before I upload this... since I used some dev to make the previous version of KAS compatible with 0.24.2 (it may have been yours... I don't recall)... will uploading this version make my SPACE STATION "fall out of the sky", as the iconic saying goes (I want to make sure my station rocket parts work for making my... ahem... Mun-orbiting Gen 1 Refueling Station, and since they currently rely on the boxes & struts, along with fuel pipe ports)? Link to comment Share on other sites More sharing options...
Galane Posted September 1, 2014 Share Posted September 1, 2014 I am getting an error with KAS now that I have the newest upload and it is saying that it is incompatible with the 24.2 version of KSP. Any idea why? It is also triggering on the KSPAPIextensions and aaa_Toolbar as well all for the same thing.Get the KSPAPIextensions and 000_Toolbar latest versions separately from KAS. The latest KAS 0.4.8.zip download linked in this thread doesn't include either.AFAIK, several mods using KSPAPIextensions require copies of the DLL in their own folders and you should copy the same DLL version to all. 'Course mod authors should update to use the latest version of the DLL and support loading it from anywhere under GameData. Link to comment Share on other sites More sharing options...
Galane Posted September 1, 2014 Share Posted September 1, 2014 (edited) Success! With the new version I was able to place the rest of the mono tanks without anything exploding or having the ship ripped apart.But there's still a problem with force being applied to the Kerbal when attaching parts. Here's the orbital part of the vehicle I used, with a docking port, large kethane converter and a kethane tank to simulate the part of the craft I was putting the tanks on. Only requires Kethane and KAS mods.http://pastebin.com/chH2Z4TMEither build a launcher under this or toss it to orbit with hyperedit.Extend the ladder, go EVA. For some reason the Kerbal starts to slowly slide down the ladder. Climb down and grab a mobility enhancer then go back up and attach it to the upper docking port so you can climb across it. Get another one and attach it to the Kethane converter so you'll be able climb far enough to attach the mono tanks to the side of the kethane tank. There's already a ladder section mounted to bridge the port attached to the lander can.Climb down and get a mono tank, then back up and attach it to the kethane tank. When doing that Bob would be shoved rather hard down the ladder. IIRC the push after attaching the ladder sections was less, if any.I didn't try letting go of the ladder. Whenever I've tried free flying EVA the poor Kerbal always ends up running out of mono and doing a Dutchman. Some way to attach a tether *and* carry a part would be quite useful.P.S. I removed the ladder sections on my ship in orbit after this emergency mission, no need leaving behind extra parts. Edited September 1, 2014 by Galane Link to comment Share on other sites More sharing options...
KospY Posted September 1, 2014 Author Share Posted September 1, 2014 Success! With the new version I was able to place the rest of the mono tanks without anything exploding or having the ship ripped apart.But there's still a problem with force being applied to the Kerbal when attaching parts. Here's the orbital part of the vehicle I used, with a docking port, large kethane converter and a kethane tank to simulate the part of the craft I was putting the tanks on. Only requires Kethane and KAS mods.http://pastebin.com/chH2Z4TMEither build a launcher under this or toss it to orbit with hyperedit.Extend the ladder, go EVA. For some reason the Kerbal starts to slowly slide down the ladder. Climb down and grab a mobility enhancer then go back up and attach it to the upper docking port so you can climb across it. Get another one and attach it to the Kethane converter so you'll be able climb far enough to attach the mono tanks to the side of the kethane tank. There's already a ladder section mounted to bridge the port attached to the lander can.Climb down and get a mono tank, then back up and attach it to the kethane tank. When doing that Bob would be shoved rather hard down the ladder. IIRC the push after attaching the ladder sections was less, if any.I didn't try letting go of the ladder. Whenever I've tried free flying EVA the poor Kerbal always ends up running out of mono and doing a Dutchman. Some way to attach a tether *and* carry a part would be quite useful.P.S. I removed the ladder sections on my ship in orbit after this emergency mission, no need leaving behind extra parts. I can't load the file. It seem there is some others mods used on that craft (I found for exemple the TweakScale mod). Can you reproduce the problem with only KAS ? Link to comment Share on other sites More sharing options...
Scotius Posted September 1, 2014 Share Posted September 1, 2014 KospY, i love you man My favourite, must-have mod finally works in 64 bits - i shed manly tear of joy Link to comment Share on other sites More sharing options...
AccidentalDisassembly Posted September 1, 2014 Share Posted September 1, 2014 Had a question about KAS - please correct me if I'm wrong (usually am), but right now you have to be controlling a craft with a winch on it in order to use the winch, right? Is it possible to make it so that a Kerbal outside the craft could operate winches and such without re-entering the ship, or some other method of operating winches and whatnot? I am guessing it's impossible based on how other stuff in the game works when you are or aren't focused on/controlling something, but thought I'd ask... Link to comment Share on other sites More sharing options...
Genolution Posted September 1, 2014 Share Posted September 1, 2014 A big thanks to KospY for one of my favorite mods and to the rest of the team for their contributions as well. Link to comment Share on other sites More sharing options...
reschke Posted September 1, 2014 Share Posted September 1, 2014 Thanks Galane. I am working on that now but am having an issue with Real chutes as well. Time to go lurk that thread. Link to comment Share on other sites More sharing options...
Khatharr Posted September 1, 2014 Share Posted September 1, 2014 Link to comment Share on other sites More sharing options...
Dire_Squid Posted September 2, 2014 Share Posted September 2, 2014 WELL, KospY, since you didn't answer me the first time I asked, I guess I'm going to have to ask AGAIN:Uhm, before I upload this... since I used some dev to make the previous version of KAS compatible with 0.24.2 (it may have been yours... I don't recall)... will uploading this version make my SPACE STATION "fall out of the sky", as the iconic saying goes (I want to make sure my station rocket parts work for making my... ahem... Mun-orbiting Gen 1 Refueling Station, and since they currently rely on the boxes & struts, along with fuel pipe ports)? Link to comment Share on other sites More sharing options...
rabidninjawombat Posted September 2, 2014 Share Posted September 2, 2014 WELL, KospY, since you didn't answer me the first time I asked, I guess I'm going to have to ask AGAIN:No parts were changed with this update so it should not affect your craftfiles in anyway. Link to comment Share on other sites More sharing options...
Kethevin Posted September 2, 2014 Share Posted September 2, 2014 That's perfect. When I saw the 0.4.8 after KAS, I swear I could hear angels singing! Link to comment Share on other sites More sharing options...
shmameron Posted September 2, 2014 Share Posted September 2, 2014 So glad to see this is officially updated! Thanks KospY! Link to comment Share on other sites More sharing options...
somnambulist Posted September 2, 2014 Share Posted September 2, 2014 KospY -- parts with 0 mass break KAS when they're retrieved from a container. Instead of ending up on the Kerbal's back a clone of the part is created several 100 meters away. Link to comment Share on other sites More sharing options...
JeffersonFlight Posted September 2, 2014 Share Posted September 2, 2014 Welcome back! Thanks for the update Link to comment Share on other sites More sharing options...
Bomoo Posted September 2, 2014 Share Posted September 2, 2014 Could I request some alternatives to downloading from curse? For the folks who don't use it for whatever reason. Link to comment Share on other sites More sharing options...
colmo Posted September 2, 2014 Share Posted September 2, 2014 (edited) I'm trying to think what's missing, now we have full functionality back, given the release of First Contract?- Parts costs for items launched in and recovered from containers.- I'm not sure if science stored on science devices is recovered if inside a container?- Make the two new engines, Vernor and O-10, grabbable. Easy enough to edit, but a nice thing to have by default.- Some KAS specific contracts, though Fine Print's base and station contracts really benefit from KAS as it is.- I'd love to be able to move or add stock fuel lines. Great for those times you realise you've screwed up well into a mission. Would save on having to use a pipe endpoint to do the same job (still love them for larger installations where you need the reach).Those are the obvious low-hanging fruit - anything else I missed? Edited September 2, 2014 by colmo Link to comment Share on other sites More sharing options...
Nemecle Posted September 2, 2014 Share Posted September 2, 2014 excellent !welcome back and good luck for your training let's bring interesting EVA missions back ! Link to comment Share on other sites More sharing options...
BigD145 Posted September 2, 2014 Share Posted September 2, 2014 Welcome back. Thanks for updating this irreplaceable mod. Link to comment Share on other sites More sharing options...
MarcRan17 Posted September 2, 2014 Share Posted September 2, 2014 Is anyone else having issues with the New KAS conflicting with Kerbal Engineer Redux? When I load a ship in the VAB that has a KER chip on it the game crashes and the engineer readout just prior to the crash says "simulation failed". Removing KAS fixes this. Link to comment Share on other sites More sharing options...
wasmic Posted September 2, 2014 Share Posted September 2, 2014 Welcome back. Thanks for updating this irreplaceable mod.It's entirely replaceable. However, KAS is so well made that nobody would want to replace it. Happy to see you back, KospY!EDIT: Oh, and what's the license? Link to comment Share on other sites More sharing options...
Corax Posted September 3, 2014 Share Posted September 3, 2014 what's the license?https://github.com/KospY/KAS/blob/master/LICENSE.md Link to comment Share on other sites More sharing options...
Drew Kerman Posted September 3, 2014 Share Posted September 3, 2014 Is anyone else having issues with the New KAS conflicting with Kerbal Engineer Redux? When I load a ship in the VAB that has a KER chip on it the game crashes and the engineer readout just prior to the crash says "simulation failed". Removing KAS fixes this.You have to remember to state whether you're using 64 or 32-bit whenever you post about a problem Link to comment Share on other sites More sharing options...
MarcRan17 Posted September 3, 2014 Share Posted September 3, 2014 You have to remember to state whether you're using 64 or 32-bit whenever you post about a problemAh yes, sorry, 64bit KSP. Link to comment Share on other sites More sharing options...
Lumaan Posted September 3, 2014 Share Posted September 3, 2014 Getting this in my log:[LOG 23:47:31.961] Load(Model): KAS/Parts/cPort2/portStack1[ERR 23:47:31.964] Texture 'KAS/Parts/cPort2/winch_N' not found! Link to comment Share on other sites More sharing options...
Recommended Posts