Jump to content

[1.4.*] [2.5.3] (2018-04-06) UbioZur Welding Ltd. Continued

girka2k

By girka2k
in KSP1 Mod Releases

 Share

Recommended Posts

WuphonsReach

WuphonsReach

Posted
Posted

If MFT uses procedural parts to create the various sized tanks - you can't do the weld.

The only tanks that are weldable are those which come in different sizes in the SPH/VAB listing, and I suggest to avoid welding anything with non-standard "tweakable" settings like "different color" or "switch resource type".

Link to comment
Share on other sites
ale260382

ale260382

Posted
Posted

I'm not trying to weld procedural fuel tanks. RO/RealFuels turns all stock/KW/AIES fuel tanks into modular fuel tanks, with tweakscale enabled, i don't think procedural parts have a role in this process. Also, i can weld command pods, habitation modules, station parts and they all have a modular fuel tank. One big difference is they don't have tweakscale enabled, but i don't know if this is relevant.

PS i'm not trying to get fully functional parts from welding, i'm just trying to create new big parts with completely new config files using different models, just to reduce part count...

Link to comment
Share on other sites
jmbailey2000

jmbailey2000

Posted
Posted (edited)

Just FYI......doubt it applies here, but just in case......I use FuelTanks+ and they recently added support for Firespitter Fuelswitch to their tanks. I haven't been able to weld any tank that has the Fuelswitch in it.

Edited by jmbailey2000
Link to comment
Share on other sites
Alewx

Alewx

Posted
Posted
I'm not trying to weld procedural fuel tanks. RO/RealFuels turns all stock/KW/AIES fuel tanks into modular fuel tanks, with tweakscale enabled, i don't think procedural parts have a role in this process. Also, i can weld command pods, habitation modules, station parts and they all have a modular fuel tank. One big difference is they don't have tweakscale enabled, but i don't know if this is relevant.

PS i'm not trying to get fully functional parts from welding, i'm just trying to create new big parts with completely new config files using different models, just to reduce part count...

Could you please enable the advanced debug for the welding and then post us a log of it.

Link to comment
Share on other sites
ale260382

ale260382

Posted
Posted

Sure, this is the welding of a Mark1-2 pod with a FL-R1 stock fuel tank underneath. No errors but the process stops and i don't get the welding window!

[LOG 11:34:09.995] [WeldingTool]  Config was saved
[LOG 11:34:09.996] [WeldingTool] v2.1.1 - 0.90.0 - Continued
[LOG 11:34:09.996] [WeldingTool] ----- Starting Welding -----
[LOG 11:34:10.001] [WeldingTool] Welding this part: Mark1-2Pod
[LOG 11:34:10.001] [WeldingTool]  ..part rescaleFactor 1.00
[LOG 11:34:10.001] [WeldingTool]  ..part scaleFactor 1.72
[LOG 11:34:10.003] [WeldingTool]  .Found 1 config files
[LOG 11:34:10.003] [WeldingTool]  ..Config Mark1-2Pod has 13 MODEL node
[LOG 11:34:10.003] [WeldingTool]  ..MODEL url: VenStockRevamp/Squad/Parts/Command/CommandPods/1-2
[LOG 11:34:10.003] [WeldingTool]  ..node.HasValue("position") True
[LOG 11:34:10.003] [WeldingTool]  ..node position (0.000, 0.000, 0.000)
[LOG 11:34:10.003] [WeldingTool]  ..node.HasValue("rotation") False
[LOG 11:34:10.003] [WeldingTool]  ..node rotation (0.000, 0.000, 0.000)
[LOG 11:34:10.003] [WeldingTool]  ..node.HasValue("scale") True
[LOG 11:34:10.004] [WeldingTool]  ..node scale 1.722222, 1.722222, 1.722222
[LOG 11:34:10.004] [WeldingTool]  ..Childs count 2
[LOG 11:34:10.004] [WeldingTool]  ..newpart position (0.000, 15.000, 0.000)
[LOG 11:34:10.004] [WeldingTool]  ..newpart rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.004] [WeldingTool]  ..newpart rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.004] [WeldingTool]  ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.004] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.004] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.004] [WeldingTool]  ..position (0.000, 0.000, 0.000)
[LOG 11:34:10.004] [WeldingTool]  ..rotation (0.000, 0.000, 0.000)
[LOG 11:34:10.004] [WeldingTool]  ..scale (1.722, 1.722, 1.722)
[LOG 11:34:10.004] [WeldingTool]  ..MODEL url: RealismOverhaul/Models/LinearRCS
[LOG 11:34:10.004] [WeldingTool]  ..node.HasValue("position") True
[LOG 11:34:10.004] [WeldingTool]  ..node position (0.173, -0.414, -1.977)
[LOG 11:34:10.004] [WeldingTool]  ..node.HasValue("rotation") True
[LOG 11:34:10.004] [WeldingTool]  ..node rotation (0.000, 0.000, 0.000)
[LOG 11:34:10.004] [WeldingTool]  ..node.HasValue("scale") True
[LOG 11:34:10.004] [WeldingTool]  ..node scale 0.1, 0.1, 0.1
[LOG 11:34:10.004] [WeldingTool]  ..Childs count 2
[LOG 11:34:10.004] [WeldingTool]  ..newpart position (0.000, 15.000, 0.000)
[LOG 11:34:10.004] [WeldingTool]  ..newpart rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.004] [WeldingTool]  ..newpart rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.004] [WeldingTool]  ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.004] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.004] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.004] [WeldingTool]  ..position (0.173, -0.414, -1.977)
[LOG 11:34:10.004] [WeldingTool]  ..rotation (0.000, 0.000, 0.000)
[LOG 11:34:10.004] [WeldingTool]  ..scale (0.100, 0.100, 0.100)
[LOG 11:34:10.004] [WeldingTool]  ..MODEL url: RealismOverhaul/Models/LinearRCS
[LOG 11:34:10.004] [WeldingTool]  ..node.HasValue("position") True
[LOG 11:34:10.004] [WeldingTool]  ..node position (-0.173, -0.414, -1.977)
[LOG 11:34:10.004] [WeldingTool]  ..node.HasValue("rotation") True
[LOG 11:34:10.004] [WeldingTool]  ..node rotation (0.000, 0.000, 0.000)
[LOG 11:34:10.004] [WeldingTool]  ..node.HasValue("scale") True
[LOG 11:34:10.004] [WeldingTool]  ..node scale 0.1, 0.1, 0.1
[LOG 11:34:10.004] [WeldingTool]  ..Childs count 2
[LOG 11:34:10.004] [WeldingTool]  ..newpart position (0.000, 15.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..newpart rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.005] [WeldingTool]  ..newpart rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.005] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..position (-0.173, -0.414, -1.977)
[LOG 11:34:10.005] [WeldingTool]  ..rotation (0.000, 0.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..scale (0.100, 0.100, 0.100)
[LOG 11:34:10.005] [WeldingTool]  ..MODEL url: RealismOverhaul/Models/LinearRCS
[LOG 11:34:10.005] [WeldingTool]  ..node.HasValue("position") True
[LOG 11:34:10.005] [WeldingTool]  ..node position (-1.977, -0.414, -0.173)
[LOG 11:34:10.005] [WeldingTool]  ..node.HasValue("rotation") True
[LOG 11:34:10.005] [WeldingTool]  ..node rotation (0.000, 0.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..node.HasValue("scale") True
[LOG 11:34:10.005] [WeldingTool]  ..node scale 0.1, 0.1, 0.1
[LOG 11:34:10.005] [WeldingTool]  ..Childs count 2
[LOG 11:34:10.005] [WeldingTool]  ..newpart position (0.000, 15.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..newpart rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.005] [WeldingTool]  ..newpart rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.005] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..position (-1.977, -0.414, -0.173)
[LOG 11:34:10.005] [WeldingTool]  ..rotation (0.000, 0.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..scale (0.100, 0.100, 0.100)
[LOG 11:34:10.005] [WeldingTool]  ..MODEL url: RealismOverhaul/Models/LinearRCS
[LOG 11:34:10.005] [WeldingTool]  ..node.HasValue("position") True
[LOG 11:34:10.005] [WeldingTool]  ..node position (1.977, -0.414, 0.173)
[LOG 11:34:10.005] [WeldingTool]  ..node.HasValue("rotation") True
[LOG 11:34:10.005] [WeldingTool]  ..node rotation (0.000, 0.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..node.HasValue("scale") True
[LOG 11:34:10.005] [WeldingTool]  ..node scale 0.1, 0.1, 0.1
[LOG 11:34:10.005] [WeldingTool]  ..Childs count 2
[LOG 11:34:10.005] [WeldingTool]  ..newpart position (0.000, 15.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..newpart rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.005] [WeldingTool]  ..newpart rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.005] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..position (1.977, -0.414, 0.173)
[LOG 11:34:10.005] [WeldingTool]  ..rotation (0.000, 0.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..scale (0.100, 0.100, 0.100)
[LOG 11:34:10.005] [WeldingTool]  ..MODEL url: RealismOverhaul/Models/LinearRCS
[LOG 11:34:10.005] [WeldingTool]  ..node.HasValue("position") True
[LOG 11:34:10.005] [WeldingTool]  ..node position (-1.977, -0.414, 0.173)
[LOG 11:34:10.005] [WeldingTool]  ..node.HasValue("rotation") True
[LOG 11:34:10.005] [WeldingTool]  ..node rotation (0.000, 0.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..node.HasValue("scale") True
[LOG 11:34:10.005] [WeldingTool]  ..node scale 0.1, 0.1, 0.1
[LOG 11:34:10.005] [WeldingTool]  ..Childs count 2
[LOG 11:34:10.005] [WeldingTool]  ..newpart position (0.000, 15.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..position (-1.977, -0.414, 0.173)
[LOG 11:34:10.006] [WeldingTool]  ..rotation (0.000, 0.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..scale (0.100, 0.100, 0.100)
[LOG 11:34:10.006] [WeldingTool]  ..MODEL url: RealismOverhaul/Models/LinearRCS
[LOG 11:34:10.006] [WeldingTool]  ..node.HasValue("position") True
[LOG 11:34:10.006] [WeldingTool]  ..node position (1.976, -0.414, -0.173)
[LOG 11:34:10.006] [WeldingTool]  ..node.HasValue("rotation") True
[LOG 11:34:10.006] [WeldingTool]  ..node rotation (0.000, 0.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..node.HasValue("scale") True
[LOG 11:34:10.006] [WeldingTool]  ..node scale 0.1, 0.1, 0.1
[LOG 11:34:10.006] [WeldingTool]  ..Childs count 2
[LOG 11:34:10.006] [WeldingTool]  ..newpart position (0.000, 15.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..position (1.976, -0.414, -0.173)
[LOG 11:34:10.006] [WeldingTool]  ..rotation (0.000, 0.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..scale (0.100, 0.100, 0.100)
[LOG 11:34:10.006] [WeldingTool]  ..MODEL url: RealismOverhaul/Models/LinearRCS
[LOG 11:34:10.006] [WeldingTool]  ..node.HasValue("position") True
[LOG 11:34:10.006] [WeldingTool]  ..node position (-1.469, -0.414, -1.232)
[LOG 11:34:10.006] [WeldingTool]  ..node.HasValue("rotation") True
[LOG 11:34:10.006] [WeldingTool]  ..node rotation (0.000, 30.000, 90.000)
[LOG 11:34:10.006] [WeldingTool]  ..node.HasValue("scale") True
[LOG 11:34:10.006] [WeldingTool]  ..node scale 0.1, 0.1, 0.1
[LOG 11:34:10.006] [WeldingTool]  ..Childs count 2
[LOG 11:34:10.006] [WeldingTool]  ..newpart position (0.000, 15.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..position (-1.469, -0.414, -1.232)
[LOG 11:34:10.006] [WeldingTool]  ..rotation (0.000, 30.000, 90.000)
[LOG 11:34:10.006] [WeldingTool]  ..scale (0.100, 0.100, 0.100)
[LOG 11:34:10.006] [WeldingTool]  ..MODEL url: RealismOverhaul/Models/LinearRCS
[LOG 11:34:10.006] [WeldingTool]  ..node.HasValue("position") True
[LOG 11:34:10.006] [WeldingTool]  ..node position (-1.808, -0.414, -0.659)
[LOG 11:34:10.006] [WeldingTool]  ..node.HasValue("rotation") True
[LOG 11:34:10.006] [WeldingTool]  ..node rotation (270.000, 30.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..node.HasValue("scale") True
[LOG 11:34:10.006] [WeldingTool]  ..node scale 0.1, 0.1, 0.1
[LOG 11:34:10.006] [WeldingTool]  ..Childs count 2
[LOG 11:34:10.006] [WeldingTool]  ..newpart position (0.000, 15.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..position (-1.808, -0.414, -0.659)
[LOG 11:34:10.006] [WeldingTool]  ..rotation (270.000, 30.000, 0.000)
[LOG 11:34:10.007] [WeldingTool]  ..scale (0.100, 0.100, 0.100)
[LOG 11:34:10.007] [WeldingTool]  ..MODEL url: RealismOverhaul/Models/LinearRCS
[LOG 11:34:10.007] [WeldingTool]  ..node.HasValue("position") True
[LOG 11:34:10.007] [WeldingTool]  ..node position (1.469, -0.414, -1.232)
[LOG 11:34:10.007] [WeldingTool]  ..node.HasValue("rotation") True
[LOG 11:34:10.007] [WeldingTool]  ..node rotation (0.000, 330.000, 270.000)
[LOG 11:34:10.007] [WeldingTool]  ..node.HasValue("scale") True
[LOG 11:34:10.007] [WeldingTool]  ..node scale 0.1, 0.1, 0.1
[LOG 11:34:10.007] [WeldingTool]  ..Childs count 2
[LOG 11:34:10.007] [WeldingTool]  ..newpart position (0.000, 15.000, 0.000)
[LOG 11:34:10.007] [WeldingTool]  ..newpart rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.007] [WeldingTool]  ..newpart rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.007] [WeldingTool]  ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.007] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.007] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.007] [WeldingTool]  ..position (1.469, -0.414, -1.232)
[LOG 11:34:10.007] [WeldingTool]  ..rotation (0.000, 330.000, 270.000)
[LOG 11:34:10.007] [WeldingTool]  ..scale (0.100, 0.100, 0.100)
[LOG 11:34:10.007] [WeldingTool]  ..MODEL url: RealismOverhaul/Models/LinearRCS
[LOG 11:34:10.007] [WeldingTool]  ..node.HasValue("position") True
[LOG 11:34:10.007] [WeldingTool]  ..node position (1.808, -0.414, -0.659)
[LOG 11:34:10.007] [WeldingTool]  ..node.HasValue("rotation") True
[LOG 11:34:10.007] [WeldingTool]  ..node rotation (270.000, 330.000, 0.000)
[LOG 11:34:10.007] [WeldingTool]  ..node.HasValue("scale") True
[LOG 11:34:10.007] [WeldingTool]  ..node scale 0.1, 0.1, 0.1
[LOG 11:34:10.007] [WeldingTool]  ..Childs count 2
[LOG 11:34:10.007] [WeldingTool]  ..newpart position (0.000, 15.000, 0.000)
[LOG 11:34:10.007] [WeldingTool]  ..newpart rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.007] [WeldingTool]  ..newpart rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.007] [WeldingTool]  ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.007] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.007] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.007] [WeldingTool]  ..position (1.808, -0.414, -0.659)
[LOG 11:34:10.007] [WeldingTool]  ..rotation (270.000, 330.000, 0.000)
[LOG 11:34:10.007] [WeldingTool]  ..scale (0.100, 0.100, 0.100)
[LOG 11:34:10.007] [WeldingTool]  ..MODEL url: RealismOverhaul/Models/LinearRCS
[LOG 11:34:10.007] [WeldingTool]  ..node.HasValue("position") True
[LOG 11:34:10.007] [WeldingTool]  ..node position (-0.116, 1.184, -1.324)
[LOG 11:34:10.007] [WeldingTool]  ..node.HasValue("rotation") True
[LOG 11:34:10.007] [WeldingTool]  ..node rotation (270.000, 0.000, 0.000)
[LOG 11:34:10.007] [WeldingTool]  ..node.HasValue("scale") True
[LOG 11:34:10.007] [WeldingTool]  ..node scale 0.1, 0.1, 0.1
[LOG 11:34:10.007] [WeldingTool]  ..Childs count 2
[LOG 11:34:10.007] [WeldingTool]  ..newpart position (0.000, 15.000, 0.000)
[LOG 11:34:10.007] [WeldingTool]  ..newpart rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.007] [WeldingTool]  ..newpart rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.007] [WeldingTool]  ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.007] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.007] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.007] [WeldingTool]  ..position (-0.116, 1.184, -1.324)
[LOG 11:34:10.007] [WeldingTool]  ..rotation (270.000, 0.000, 0.000)
[LOG 11:34:10.007] [WeldingTool]  ..scale (0.100, 0.100, 0.100)
[LOG 11:34:10.007] [WeldingTool]  ..MODEL url: RealismOverhaul/Models/LinearRCS
[LOG 11:34:10.007] [WeldingTool]  ..node.HasValue("position") True
[LOG 11:34:10.007] [WeldingTool]  ..node position (0.116, 1.184, -1.324)
[LOG 11:34:10.007] [WeldingTool]  ..node.HasValue("rotation") True
[LOG 11:34:10.007] [WeldingTool]  ..node rotation (270.000, 0.000, 0.000)
[LOG 11:34:10.008] [WeldingTool]  ..node.HasValue("scale") True
[LOG 11:34:10.008] [WeldingTool]  ..node scale 0.1, 0.1, 0.1
[LOG 11:34:10.008] [WeldingTool]  ..Childs count 2
[LOG 11:34:10.008] [WeldingTool]  ..newpart position (0.000, 15.000, 0.000)
[LOG 11:34:10.008] [WeldingTool]  ..newpart rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.008] [WeldingTool]  ..newpart rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.008] [WeldingTool]  ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.008] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.008] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.008] [WeldingTool]  ..position (0.116, 1.184, -1.324)
[LOG 11:34:10.008] [WeldingTool]  ..rotation (270.000, 0.000, 0.000)
[LOG 11:34:10.008] [WeldingTool]  ..scale (0.100, 0.100, 0.100)
[LOG 11:34:10.008] [WeldingTool]  ..Config Mark1-2Pod has 2 RESOURCE node
[LOG 11:34:10.008] [WeldingTool]  ..RESOURCE new: MonoPropellant 30/30
[LOG 11:34:10.008] [WeldingTool]  ..RESOURCE new: AblativeShielding 1000/1000
[LOG 11:34:10.008] [WeldingTool]  ..Config Mark1-2Pod has 24 MODULE node
[LOG 11:34:10.008] [WeldingTool]  .. running in Alewx Testmode = True
[LOG 11:34:10.009] [WeldingTool] ..MODULE add: ModuleCommand
[LOG 11:34:10.009] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.009] [WeldingTool] ..MODULE add: ModuleScienceExperiment
[LOG 11:34:10.009] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.009] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.009] [WeldingTool] ..MODULE add: ModuleScienceContainer
[LOG 11:34:10.009] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.009] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.009] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.009] [WeldingTool] ..MODULE add: FlagDecal
[LOG 11:34:10.009] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool] ..MODULE add: BBModule
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool] ..MODULE add: ModuleConnectedLivingSpace
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool] ..MODULE add: ModuleTweakableReactionWheel
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool] ..MODULE add: ModuleHeatShield
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool] ..MODULE add: ModuleAnimateGeneric
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool] ..MODULE add: ModuleJettison
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool] ..MODULE add: MechJebCore
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool] ..MODULE add: BuildEngineer
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool] ..MODULE add: FlightEngineer
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool] ..MODULE add: FlightEngineerModule
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool] ..MODULE add: ModuleFuelTanks
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool] ..MODULE add: TacGenericConverter
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool] ..MODULE add: ModuleRCSFX
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool] ..MODULE add: CoMShifter
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool] ..MODULE add: LifeSupportModule
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool] ..MODULE add: ModuleTestSubject
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool] ..MODULE add: ModuleTweakableAnimateGeneric
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool] ..MODULE add: ModuleTweakableJettison
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool] ..MODULE add: ModuleTweakableFuelPump
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool] ..MODULE add: kOSProcessor
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 0 FXEmitters and 0 Sound in prelaunch FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 0 FXEmitters and 0 Sound in activate FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 0 FXEmitters and 0 Sound in active FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 0 FXEmitters and 0 Sound in deactivate FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup0 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup1 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup2 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup3 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup4 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup5 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup6 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup7 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup8 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup9 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup10 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup11 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup12 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup13 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup14 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup15 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup16 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup17 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup18 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup19 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup20 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup21 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup22 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup23 FxGroups
[LOG 11:34:10.014] [WeldingTool]  .Part Mark1-2Pod has 2 Stack attach node(s)
[LOG 11:34:10.014] [WeldingTool]  .Stack Node Add: topMark1-2Pod0
[LOG 11:34:10.015] [WeldingTool]  AdvDebug(.New Center of Mass: (0.0, -0.1, -0.8)
[LOG 11:34:10.015] [WeldingTool]  AdvDebug(weldThisPart - newpart.partInfo.category: Pods
[LOG 11:34:10.015] [WeldingTool] Welding this part: RCSTank1-2
[LOG 11:34:10.015] [WeldingTool]  ..part rescaleFactor 1.00
[LOG 11:34:10.015] [WeldingTool]  ..part scaleFactor 1.00
[LOG 11:34:10.016] [WeldingTool]  .Found 1 config files
[LOG 11:34:10.016] [WeldingTool]  ..Config RCSTank1-2 has 1 MODEL node
[LOG 11:34:10.016] [WeldingTool]  ..MODEL url: VenStockRevamp/Squad/Parts/FuelTank/RCSTankR1
[LOG 11:34:10.016] [WeldingTool]  ..node.HasValue("position") False
[LOG 11:34:10.016] [WeldingTool]  ..node position (0.000, 0.000, 0.000)
[LOG 11:34:10.016] [WeldingTool]  ..node.HasValue("rotation") False
[LOG 11:34:10.016] [WeldingTool]  ..node rotation (0.000, 0.000, 0.000)
[LOG 11:34:10.016] [WeldingTool]  ..node.HasValue("scale") False
[LOG 11:34:10.016] [WeldingTool]  ..Childs count 1
[LOG 11:34:10.016] [WeldingTool]  ..newpart position (0.000, 13.675, 0.000)
[LOG 11:34:10.016] [WeldingTool]  ..newpart rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.016] [WeldingTool]  ..newpart rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.016] [WeldingTool]  ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.016] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.016] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.016] [WeldingTool]  ..position (0.000, -1.325, 0.000)
[LOG 11:34:10.016] [WeldingTool]  ..rotation (0.000, 0.000, 0.000)
[LOG 11:34:10.016] [WeldingTool]  ..scale (1.000, 1.000, 1.000)
[LOG 11:34:10.016] [WeldingTool]  ..Config RCSTank1-2 has 0 RESOURCE node
[LOG 11:34:10.016] [WeldingTool]  ..Config RCSTank1-2 has 3 MODULE node
[LOG 11:34:10.016] [WeldingTool]  .. running in Alewx Testmode = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | BBModule Module already exists!!!
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.017] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.017] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.017] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.017] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.017] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.017] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.017] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.017] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.017] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.017] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.017] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.017] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.017] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.017] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.017] [WeldingTool]  | Module ready to add = True

Link to comment
Share on other sites
Alewx

Alewx

Posted
Posted
Sure, this is the welding of a Mark1-2 pod with a FL-R1 stock fuel tank underneath. No errors but the process stops and i don't get the welding window!

[LOG 11:34:09.995] [WeldingTool]  Config was saved
[LOG 11:34:09.996] [WeldingTool] v2.1.1 - 0.90.0 - Continued
[LOG 11:34:09.996] [WeldingTool] ----- Starting Welding -----
[LOG 11:34:10.001] [WeldingTool] Welding this part: Mark1-2Pod
[LOG 11:34:10.001] [WeldingTool]  ..part rescaleFactor 1.00
[LOG 11:34:10.001] [WeldingTool]  ..part scaleFactor 1.72
[LOG 11:34:10.003] [WeldingTool]  .Found 1 config files
[LOG 11:34:10.003] [WeldingTool]  ..Config Mark1-2Pod has 13 MODEL node
[LOG 11:34:10.003] [WeldingTool]  ..MODEL url: VenStockRevamp/Squad/Parts/Command/CommandPods/1-2
[LOG 11:34:10.003] [WeldingTool]  ..node.HasValue("position") True
[LOG 11:34:10.003] [WeldingTool]  ..node position (0.000, 0.000, 0.000)
[LOG 11:34:10.003] [WeldingTool]  ..node.HasValue("rotation") False
[LOG 11:34:10.003] [WeldingTool]  ..node rotation (0.000, 0.000, 0.000)
[LOG 11:34:10.003] [WeldingTool]  ..node.HasValue("scale") True
[LOG 11:34:10.004] [WeldingTool]  ..node scale 1.722222, 1.722222, 1.722222
[LOG 11:34:10.004] [WeldingTool]  ..Childs count 2
[LOG 11:34:10.004] [WeldingTool]  ..newpart position (0.000, 15.000, 0.000)
[LOG 11:34:10.004] [WeldingTool]  ..newpart rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.004] [WeldingTool]  ..newpart rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.004] [WeldingTool]  ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.004] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.004] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.004] [WeldingTool]  ..position (0.000, 0.000, 0.000)
[LOG 11:34:10.004] [WeldingTool]  ..rotation (0.000, 0.000, 0.000)
[LOG 11:34:10.004] [WeldingTool]  ..scale (1.722, 1.722, 1.722)
[LOG 11:34:10.004] [WeldingTool]  ..MODEL url: RealismOverhaul/Models/LinearRCS
[LOG 11:34:10.004] [WeldingTool]  ..node.HasValue("position") True
[LOG 11:34:10.004] [WeldingTool]  ..node position (0.173, -0.414, -1.977)
[LOG 11:34:10.004] [WeldingTool]  ..node.HasValue("rotation") True
[LOG 11:34:10.004] [WeldingTool]  ..node rotation (0.000, 0.000, 0.000)
[LOG 11:34:10.004] [WeldingTool]  ..node.HasValue("scale") True
[LOG 11:34:10.004] [WeldingTool]  ..node scale 0.1, 0.1, 0.1
[LOG 11:34:10.004] [WeldingTool]  ..Childs count 2
[LOG 11:34:10.004] [WeldingTool]  ..newpart position (0.000, 15.000, 0.000)
[LOG 11:34:10.004] [WeldingTool]  ..newpart rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.004] [WeldingTool]  ..newpart rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.004] [WeldingTool]  ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.004] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.004] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.004] [WeldingTool]  ..position (0.173, -0.414, -1.977)
[LOG 11:34:10.004] [WeldingTool]  ..rotation (0.000, 0.000, 0.000)
[LOG 11:34:10.004] [WeldingTool]  ..scale (0.100, 0.100, 0.100)
[LOG 11:34:10.004] [WeldingTool]  ..MODEL url: RealismOverhaul/Models/LinearRCS
[LOG 11:34:10.004] [WeldingTool]  ..node.HasValue("position") True
[LOG 11:34:10.004] [WeldingTool]  ..node position (-0.173, -0.414, -1.977)
[LOG 11:34:10.004] [WeldingTool]  ..node.HasValue("rotation") True
[LOG 11:34:10.004] [WeldingTool]  ..node rotation (0.000, 0.000, 0.000)
[LOG 11:34:10.004] [WeldingTool]  ..node.HasValue("scale") True
[LOG 11:34:10.004] [WeldingTool]  ..node scale 0.1, 0.1, 0.1
[LOG 11:34:10.004] [WeldingTool]  ..Childs count 2
[LOG 11:34:10.004] [WeldingTool]  ..newpart position (0.000, 15.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..newpart rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.005] [WeldingTool]  ..newpart rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.005] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..position (-0.173, -0.414, -1.977)
[LOG 11:34:10.005] [WeldingTool]  ..rotation (0.000, 0.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..scale (0.100, 0.100, 0.100)
[LOG 11:34:10.005] [WeldingTool]  ..MODEL url: RealismOverhaul/Models/LinearRCS
[LOG 11:34:10.005] [WeldingTool]  ..node.HasValue("position") True
[LOG 11:34:10.005] [WeldingTool]  ..node position (-1.977, -0.414, -0.173)
[LOG 11:34:10.005] [WeldingTool]  ..node.HasValue("rotation") True
[LOG 11:34:10.005] [WeldingTool]  ..node rotation (0.000, 0.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..node.HasValue("scale") True
[LOG 11:34:10.005] [WeldingTool]  ..node scale 0.1, 0.1, 0.1
[LOG 11:34:10.005] [WeldingTool]  ..Childs count 2
[LOG 11:34:10.005] [WeldingTool]  ..newpart position (0.000, 15.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..newpart rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.005] [WeldingTool]  ..newpart rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.005] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..position (-1.977, -0.414, -0.173)
[LOG 11:34:10.005] [WeldingTool]  ..rotation (0.000, 0.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..scale (0.100, 0.100, 0.100)
[LOG 11:34:10.005] [WeldingTool]  ..MODEL url: RealismOverhaul/Models/LinearRCS
[LOG 11:34:10.005] [WeldingTool]  ..node.HasValue("position") True
[LOG 11:34:10.005] [WeldingTool]  ..node position (1.977, -0.414, 0.173)
[LOG 11:34:10.005] [WeldingTool]  ..node.HasValue("rotation") True
[LOG 11:34:10.005] [WeldingTool]  ..node rotation (0.000, 0.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..node.HasValue("scale") True
[LOG 11:34:10.005] [WeldingTool]  ..node scale 0.1, 0.1, 0.1
[LOG 11:34:10.005] [WeldingTool]  ..Childs count 2
[LOG 11:34:10.005] [WeldingTool]  ..newpart position (0.000, 15.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..newpart rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.005] [WeldingTool]  ..newpart rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.005] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..position (1.977, -0.414, 0.173)
[LOG 11:34:10.005] [WeldingTool]  ..rotation (0.000, 0.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..scale (0.100, 0.100, 0.100)
[LOG 11:34:10.005] [WeldingTool]  ..MODEL url: RealismOverhaul/Models/LinearRCS
[LOG 11:34:10.005] [WeldingTool]  ..node.HasValue("position") True
[LOG 11:34:10.005] [WeldingTool]  ..node position (-1.977, -0.414, 0.173)
[LOG 11:34:10.005] [WeldingTool]  ..node.HasValue("rotation") True
[LOG 11:34:10.005] [WeldingTool]  ..node rotation (0.000, 0.000, 0.000)
[LOG 11:34:10.005] [WeldingTool]  ..node.HasValue("scale") True
[LOG 11:34:10.005] [WeldingTool]  ..node scale 0.1, 0.1, 0.1
[LOG 11:34:10.005] [WeldingTool]  ..Childs count 2
[LOG 11:34:10.005] [WeldingTool]  ..newpart position (0.000, 15.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..position (-1.977, -0.414, 0.173)
[LOG 11:34:10.006] [WeldingTool]  ..rotation (0.000, 0.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..scale (0.100, 0.100, 0.100)
[LOG 11:34:10.006] [WeldingTool]  ..MODEL url: RealismOverhaul/Models/LinearRCS
[LOG 11:34:10.006] [WeldingTool]  ..node.HasValue("position") True
[LOG 11:34:10.006] [WeldingTool]  ..node position (1.976, -0.414, -0.173)
[LOG 11:34:10.006] [WeldingTool]  ..node.HasValue("rotation") True
[LOG 11:34:10.006] [WeldingTool]  ..node rotation (0.000, 0.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..node.HasValue("scale") True
[LOG 11:34:10.006] [WeldingTool]  ..node scale 0.1, 0.1, 0.1
[LOG 11:34:10.006] [WeldingTool]  ..Childs count 2
[LOG 11:34:10.006] [WeldingTool]  ..newpart position (0.000, 15.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..position (1.976, -0.414, -0.173)
[LOG 11:34:10.006] [WeldingTool]  ..rotation (0.000, 0.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..scale (0.100, 0.100, 0.100)
[LOG 11:34:10.006] [WeldingTool]  ..MODEL url: RealismOverhaul/Models/LinearRCS
[LOG 11:34:10.006] [WeldingTool]  ..node.HasValue("position") True
[LOG 11:34:10.006] [WeldingTool]  ..node position (-1.469, -0.414, -1.232)
[LOG 11:34:10.006] [WeldingTool]  ..node.HasValue("rotation") True
[LOG 11:34:10.006] [WeldingTool]  ..node rotation (0.000, 30.000, 90.000)
[LOG 11:34:10.006] [WeldingTool]  ..node.HasValue("scale") True
[LOG 11:34:10.006] [WeldingTool]  ..node scale 0.1, 0.1, 0.1
[LOG 11:34:10.006] [WeldingTool]  ..Childs count 2
[LOG 11:34:10.006] [WeldingTool]  ..newpart position (0.000, 15.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..position (-1.469, -0.414, -1.232)
[LOG 11:34:10.006] [WeldingTool]  ..rotation (0.000, 30.000, 90.000)
[LOG 11:34:10.006] [WeldingTool]  ..scale (0.100, 0.100, 0.100)
[LOG 11:34:10.006] [WeldingTool]  ..MODEL url: RealismOverhaul/Models/LinearRCS
[LOG 11:34:10.006] [WeldingTool]  ..node.HasValue("position") True
[LOG 11:34:10.006] [WeldingTool]  ..node position (-1.808, -0.414, -0.659)
[LOG 11:34:10.006] [WeldingTool]  ..node.HasValue("rotation") True
[LOG 11:34:10.006] [WeldingTool]  ..node rotation (270.000, 30.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..node.HasValue("scale") True
[LOG 11:34:10.006] [WeldingTool]  ..node scale 0.1, 0.1, 0.1
[LOG 11:34:10.006] [WeldingTool]  ..Childs count 2
[LOG 11:34:10.006] [WeldingTool]  ..newpart position (0.000, 15.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.006] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.006] [WeldingTool]  ..position (-1.808, -0.414, -0.659)
[LOG 11:34:10.006] [WeldingTool]  ..rotation (270.000, 30.000, 0.000)
[LOG 11:34:10.007] [WeldingTool]  ..scale (0.100, 0.100, 0.100)
[LOG 11:34:10.007] [WeldingTool]  ..MODEL url: RealismOverhaul/Models/LinearRCS
[LOG 11:34:10.007] [WeldingTool]  ..node.HasValue("position") True
[LOG 11:34:10.007] [WeldingTool]  ..node position (1.469, -0.414, -1.232)
[LOG 11:34:10.007] [WeldingTool]  ..node.HasValue("rotation") True
[LOG 11:34:10.007] [WeldingTool]  ..node rotation (0.000, 330.000, 270.000)
[LOG 11:34:10.007] [WeldingTool]  ..node.HasValue("scale") True
[LOG 11:34:10.007] [WeldingTool]  ..node scale 0.1, 0.1, 0.1
[LOG 11:34:10.007] [WeldingTool]  ..Childs count 2
[LOG 11:34:10.007] [WeldingTool]  ..newpart position (0.000, 15.000, 0.000)
[LOG 11:34:10.007] [WeldingTool]  ..newpart rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.007] [WeldingTool]  ..newpart rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.007] [WeldingTool]  ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.007] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.007] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.007] [WeldingTool]  ..position (1.469, -0.414, -1.232)
[LOG 11:34:10.007] [WeldingTool]  ..rotation (0.000, 330.000, 270.000)
[LOG 11:34:10.007] [WeldingTool]  ..scale (0.100, 0.100, 0.100)
[LOG 11:34:10.007] [WeldingTool]  ..MODEL url: RealismOverhaul/Models/LinearRCS
[LOG 11:34:10.007] [WeldingTool]  ..node.HasValue("position") True
[LOG 11:34:10.007] [WeldingTool]  ..node position (1.808, -0.414, -0.659)
[LOG 11:34:10.007] [WeldingTool]  ..node.HasValue("rotation") True
[LOG 11:34:10.007] [WeldingTool]  ..node rotation (270.000, 330.000, 0.000)
[LOG 11:34:10.007] [WeldingTool]  ..node.HasValue("scale") True
[LOG 11:34:10.007] [WeldingTool]  ..node scale 0.1, 0.1, 0.1
[LOG 11:34:10.007] [WeldingTool]  ..Childs count 2
[LOG 11:34:10.007] [WeldingTool]  ..newpart position (0.000, 15.000, 0.000)
[LOG 11:34:10.007] [WeldingTool]  ..newpart rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.007] [WeldingTool]  ..newpart rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.007] [WeldingTool]  ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.007] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.007] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.007] [WeldingTool]  ..position (1.808, -0.414, -0.659)
[LOG 11:34:10.007] [WeldingTool]  ..rotation (270.000, 330.000, 0.000)
[LOG 11:34:10.007] [WeldingTool]  ..scale (0.100, 0.100, 0.100)
[LOG 11:34:10.007] [WeldingTool]  ..MODEL url: RealismOverhaul/Models/LinearRCS
[LOG 11:34:10.007] [WeldingTool]  ..node.HasValue("position") True
[LOG 11:34:10.007] [WeldingTool]  ..node position (-0.116, 1.184, -1.324)
[LOG 11:34:10.007] [WeldingTool]  ..node.HasValue("rotation") True
[LOG 11:34:10.007] [WeldingTool]  ..node rotation (270.000, 0.000, 0.000)
[LOG 11:34:10.007] [WeldingTool]  ..node.HasValue("scale") True
[LOG 11:34:10.007] [WeldingTool]  ..node scale 0.1, 0.1, 0.1
[LOG 11:34:10.007] [WeldingTool]  ..Childs count 2
[LOG 11:34:10.007] [WeldingTool]  ..newpart position (0.000, 15.000, 0.000)
[LOG 11:34:10.007] [WeldingTool]  ..newpart rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.007] [WeldingTool]  ..newpart rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.007] [WeldingTool]  ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.007] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.007] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.007] [WeldingTool]  ..position (-0.116, 1.184, -1.324)
[LOG 11:34:10.007] [WeldingTool]  ..rotation (270.000, 0.000, 0.000)
[LOG 11:34:10.007] [WeldingTool]  ..scale (0.100, 0.100, 0.100)
[LOG 11:34:10.007] [WeldingTool]  ..MODEL url: RealismOverhaul/Models/LinearRCS
[LOG 11:34:10.007] [WeldingTool]  ..node.HasValue("position") True
[LOG 11:34:10.007] [WeldingTool]  ..node position (0.116, 1.184, -1.324)
[LOG 11:34:10.007] [WeldingTool]  ..node.HasValue("rotation") True
[LOG 11:34:10.007] [WeldingTool]  ..node rotation (270.000, 0.000, 0.000)
[LOG 11:34:10.008] [WeldingTool]  ..node.HasValue("scale") True
[LOG 11:34:10.008] [WeldingTool]  ..node scale 0.1, 0.1, 0.1
[LOG 11:34:10.008] [WeldingTool]  ..Childs count 2
[LOG 11:34:10.008] [WeldingTool]  ..newpart position (0.000, 15.000, 0.000)
[LOG 11:34:10.008] [WeldingTool]  ..newpart rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.008] [WeldingTool]  ..newpart rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.008] [WeldingTool]  ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.008] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.008] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.008] [WeldingTool]  ..position (0.116, 1.184, -1.324)
[LOG 11:34:10.008] [WeldingTool]  ..rotation (270.000, 0.000, 0.000)
[LOG 11:34:10.008] [WeldingTool]  ..scale (0.100, 0.100, 0.100)
[LOG 11:34:10.008] [WeldingTool]  ..Config Mark1-2Pod has 2 RESOURCE node
[LOG 11:34:10.008] [WeldingTool]  ..RESOURCE new: MonoPropellant 30/30
[LOG 11:34:10.008] [WeldingTool]  ..RESOURCE new: AblativeShielding 1000/1000
[LOG 11:34:10.008] [WeldingTool]  ..Config Mark1-2Pod has 24 MODULE node
[LOG 11:34:10.008] [WeldingTool]  .. running in Alewx Testmode = True
[LOG 11:34:10.009] [WeldingTool] ..MODULE add: ModuleCommand
[LOG 11:34:10.009] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.009] [WeldingTool] ..MODULE add: ModuleScienceExperiment
[LOG 11:34:10.009] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.009] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.009] [WeldingTool] ..MODULE add: ModuleScienceContainer
[LOG 11:34:10.009] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.009] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.009] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.009] [WeldingTool] ..MODULE add: FlagDecal
[LOG 11:34:10.009] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool] ..MODULE add: BBModule
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool] ..MODULE add: ModuleConnectedLivingSpace
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool] ..MODULE add: ModuleTweakableReactionWheel
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool] ..MODULE add: ModuleHeatShield
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool] ..MODULE add: ModuleAnimateGeneric
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool] ..MODULE add: ModuleJettison
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool] ..MODULE add: MechJebCore
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.010] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool] ..MODULE add: BuildEngineer
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool] ..MODULE add: FlightEngineer
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool] ..MODULE add: FlightEngineerModule
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool] ..MODULE add: ModuleFuelTanks
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.011] [WeldingTool] ..MODULE add: TacGenericConverter
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool] ..MODULE add: ModuleRCSFX
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool] ..MODULE add: CoMShifter
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool] ..MODULE add: LifeSupportModule
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.012] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool] ..MODULE add: ModuleTestSubject
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool] ..MODULE add: ModuleTweakableAnimateGeneric
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool] ..MODULE add: ModuleTweakableJettison
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.013] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool] ..MODULE add: ModuleTweakableFuelPump
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.014] [WeldingTool] ..MODULE add: kOSProcessor
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 0 FXEmitters and 0 Sound in prelaunch FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 0 FXEmitters and 0 Sound in activate FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 0 FXEmitters and 0 Sound in active FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 0 FXEmitters and 0 Sound in deactivate FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup0 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup1 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup2 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup3 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup4 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup5 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup6 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup7 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup8 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup9 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup10 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup11 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup12 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup13 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup14 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup15 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup16 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup17 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup18 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup19 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup20 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup21 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup22 FxGroups
[LOG 11:34:10.014] [WeldingTool]  ..Config Mark1-2Pod has 1 FXEmitters and 0 Sound in rcsGroup23 FxGroups
[LOG 11:34:10.014] [WeldingTool]  .Part Mark1-2Pod has 2 Stack attach node(s)
[LOG 11:34:10.014] [WeldingTool]  .Stack Node Add: topMark1-2Pod0
[LOG 11:34:10.015] [WeldingTool]  AdvDebug(.New Center of Mass: (0.0, -0.1, -0.8)
[LOG 11:34:10.015] [WeldingTool]  AdvDebug(weldThisPart - newpart.partInfo.category: Pods
[LOG 11:34:10.015] [WeldingTool] Welding this part: RCSTank1-2
[LOG 11:34:10.015] [WeldingTool]  ..part rescaleFactor 1.00
[LOG 11:34:10.015] [WeldingTool]  ..part scaleFactor 1.00
[LOG 11:34:10.016] [WeldingTool]  .Found 1 config files
[LOG 11:34:10.016] [WeldingTool]  ..Config RCSTank1-2 has 1 MODEL node
[LOG 11:34:10.016] [WeldingTool]  ..MODEL url: VenStockRevamp/Squad/Parts/FuelTank/RCSTankR1
[LOG 11:34:10.016] [WeldingTool]  ..node.HasValue("position") False
[LOG 11:34:10.016] [WeldingTool]  ..node position (0.000, 0.000, 0.000)
[LOG 11:34:10.016] [WeldingTool]  ..node.HasValue("rotation") False
[LOG 11:34:10.016] [WeldingTool]  ..node rotation (0.000, 0.000, 0.000)
[LOG 11:34:10.016] [WeldingTool]  ..node.HasValue("scale") False
[LOG 11:34:10.016] [WeldingTool]  ..Childs count 1
[LOG 11:34:10.016] [WeldingTool]  ..newpart position (0.000, 13.675, 0.000)
[LOG 11:34:10.016] [WeldingTool]  ..newpart rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.016] [WeldingTool]  ..newpart rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.016] [WeldingTool]  ..newpart rotation.localEulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.016] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 11:34:10.016] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 11:34:10.016] [WeldingTool]  ..position (0.000, -1.325, 0.000)
[LOG 11:34:10.016] [WeldingTool]  ..rotation (0.000, 0.000, 0.000)
[LOG 11:34:10.016] [WeldingTool]  ..scale (1.000, 1.000, 1.000)
[LOG 11:34:10.016] [WeldingTool]  ..Config RCSTank1-2 has 0 RESOURCE node
[LOG 11:34:10.016] [WeldingTool]  ..Config RCSTank1-2 has 3 MODULE node
[LOG 11:34:10.016] [WeldingTool]  .. running in Alewx Testmode = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | BBModule Module already exists!!!
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.016] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.017] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.017] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.017] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.017] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.017] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.017] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.017] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.017] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.017] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.017] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.017] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.017] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.017] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.017] [WeldingTool]  | Module ready to add = True
[LOG 11:34:10.017] [WeldingTool]  | Module ready to add = True

Looks like it is somehow connected to the BBModule, which mod does contain that?

Link to comment
Share on other sites
ale260382

ale260382

Posted
Posted

Ok, sometimes the debugger throws an exception and i think i've tracked down the problem. BBModule is Ferram's Better Buoyancy, a RO reccomended mod, and it's added automatically to all parts, but it has nothing to do with the problem.

The problem is ModuleFuelTank doesn't always contain a basemass attribute: in the fixed size RO parts it has one (usually "-1" or a float), but in the stock/AIES/KW fuel tanks realfuels doesn't provide any value for basemass.

If a basemass is set to -1 (the default value) your code interpret it like a float and calls mergeModuleFloatValues which checks this:

[COLOR=#009695]if[/COLOR][COLOR=#444444]([/COLOR][COLOR=#444444]newModule[/COLOR][COLOR=#444444].[/COLOR][COLOR=#444444]HasValue[/COLOR][COLOR=#444444]([/COLOR][COLOR=#444444]ModuleAttribute[/COLOR][COLOR=#444444])[/COLOR][COLOR=#444444] || [/COLOR][COLOR=#444444]existingNewModule[/COLOR][COLOR=#444444].[/COLOR][COLOR=#444444]HasValue[/COLOR][COLOR=#444444]([/COLOR][COLOR=#444444]ModuleAttribute[/COLOR][COLOR=#444444]))[/COLOR]
[COLOR=#444444]{[/COLOR]
    [COLOR=#009695]float [/COLOR][COLOR=#444444]newValue [/COLOR][COLOR=#444444]= [/COLOR][COLOR=#009695]float[/COLOR][COLOR=#444444].[/COLOR][COLOR=#444444]Parse[/COLOR][COLOR=#444444]([/COLOR][COLOR=#444444]newModule[/COLOR][COLOR=#444444].[/COLOR][COLOR=#444444]GetValue[/COLOR][COLOR=#444444]([/COLOR][COLOR=#444444]ModuleAttribute[/COLOR][COLOR=#444444]))[/COLOR][COLOR=#444444];[/COLOR]

In some cases, when ModuleAttribute is basemass, newModule.HasValue(ModuleAttribute) is false, but existingNewModule.HasValue(ModuleAttribute) is true, resulting in passing the parser newModule.GetValue(ModuleAttribute) which is a null value and throws an exception, because apparently parser doesn't like null arguments. One possible solution should be changing that line into something like:

[COLOR=#009695]float[/COLOR][COLOR=#444444] newValue [/COLOR][COLOR=#444444]= [/COLOR][COLOR=#444444]newModule[/COLOR][COLOR=#444444].[/COLOR][COLOR=#444444]HasValue[/COLOR][COLOR=#444444]([/COLOR][COLOR=#444444]ModuleAttribute[/COLOR][COLOR=#444444])[/COLOR][COLOR=#444444] ? [/COLOR][COLOR=#009695]float[/COLOR][COLOR=#444444].[/COLOR][COLOR=#444444]Parse[/COLOR][COLOR=#444444]([/COLOR][COLOR=#444444]newModule[/COLOR][COLOR=#444444].[/COLOR][COLOR=#444444]GetValue[/COLOR][COLOR=#444444]([/COLOR][COLOR=#444444]ModuleAttribute[/COLOR][COLOR=#444444]))[/COLOR][COLOR=#444444] : [/COLOR][COLOR=#f57d00]0.0f[/COLOR][COLOR=#444444];[/COLOR]

which i recompiled and tested and apparently it's working fine (now i can weld multiple tanks and capsules) but i don't know if this fix would impact on other aspects of the mod so i'm not sure.

Anyway adding basemass values as floats wouldn't produce the correct value in many cases because a value of "-1" is a special value and should not be added. I think handling correctly basemass would require a specific patch.

Good work ;) Alessandro

Link to comment
Share on other sites
Alewx

Alewx

Posted
Posted
Ok, sometimes the debugger throws an exception and i think i've tracked down the problem. BBModule is Ferram's Better Buoyancy, a RO reccomended mod, and it's added automatically to all parts, but it has nothing to do with the problem.

The problem is ModuleFuelTank doesn't always contain a basemass attribute: in the fixed size RO parts it has one (usually "-1" or a float), but in the stock/AIES/KW fuel tanks realfuels doesn't provide any value for basemass.

If a basemass is set to -1 (the default value) your code interpret it like a float and calls mergeModuleFloatValues which checks this:

[COLOR=#009695]if[/COLOR][COLOR=#444444]([/COLOR][COLOR=#444444]newModule[/COLOR][COLOR=#444444].[/COLOR][COLOR=#444444]HasValue[/COLOR][COLOR=#444444]([/COLOR][COLOR=#444444]ModuleAttribute[/COLOR][COLOR=#444444])[/COLOR][COLOR=#444444] || [/COLOR][COLOR=#444444]existingNewModule[/COLOR][COLOR=#444444].[/COLOR][COLOR=#444444]HasValue[/COLOR][COLOR=#444444]([/COLOR][COLOR=#444444]ModuleAttribute[/COLOR][COLOR=#444444]))[/COLOR]
[COLOR=#444444]{[/COLOR]
    [COLOR=#009695]float [/COLOR][COLOR=#444444]newValue [/COLOR][COLOR=#444444]= [/COLOR][COLOR=#009695]float[/COLOR][COLOR=#444444].[/COLOR][COLOR=#444444]Parse[/COLOR][COLOR=#444444]([/COLOR][COLOR=#444444]newModule[/COLOR][COLOR=#444444].[/COLOR][COLOR=#444444]GetValue[/COLOR][COLOR=#444444]([/COLOR][COLOR=#444444]ModuleAttribute[/COLOR][COLOR=#444444]))[/COLOR][COLOR=#444444];[/COLOR]

In some cases, when ModuleAttribute is basemass, newModule.HasValue(ModuleAttribute) is false, but existingNewModule.HasValue(ModuleAttribute) is true, resulting in passing the parser newModule.GetValue(ModuleAttribute) which is a null value and throws an exception, because apparently parser doesn't like null arguments. One possible solution should be changing that line into something like:

[COLOR=#009695]float[/COLOR][COLOR=#444444] newValue [/COLOR][COLOR=#444444]= [/COLOR][COLOR=#444444]newModule[/COLOR][COLOR=#444444].[/COLOR][COLOR=#444444]HasValue[/COLOR][COLOR=#444444]([/COLOR][COLOR=#444444]ModuleAttribute[/COLOR][COLOR=#444444])[/COLOR][COLOR=#444444] ? [/COLOR][COLOR=#009695]float[/COLOR][COLOR=#444444].[/COLOR][COLOR=#444444]Parse[/COLOR][COLOR=#444444]([/COLOR][COLOR=#444444]newModule[/COLOR][COLOR=#444444].[/COLOR][COLOR=#444444]GetValue[/COLOR][COLOR=#444444]([/COLOR][COLOR=#444444]ModuleAttribute[/COLOR][COLOR=#444444]))[/COLOR][COLOR=#444444] : [/COLOR][COLOR=#f57d00]0.0f[/COLOR][COLOR=#444444];[/COLOR]

which i recompiled and tested and apparently it's working fine (now i can weld multiple tanks and capsules) but i don't know if this fix would impact on other aspects of the mod so i'm not sure.

Anyway adding basemass values as floats wouldn't produce the correct value in many cases because a value of "-1" is a special value and should not be added. I think handling correctly basemass would require a specific patch.

Good work ;) Alessandro

Hmm ok nice that you found the problem.

The patch should more be to check for the same type at installed module and module that shall get merged. Ah that will take time.

Argh I see work coming towards me.

Link to comment
Share on other sites
FatherLawrence

FatherLawrence

Posted
Posted

I'm having a problem where the button for welding no longer shows up on the stock toolbar. I've used it before and still have my previous weldments available as parts, but I can't make new ones because I can't find the button. I've looked in both the SPH and VAB, and I've checked Blizzy's toolbar too. Ideas?

Link to comment
Share on other sites
Alewx

Alewx

Posted
Posted
I'm having a problem where the button for welding no longer shows up on the stock toolbar. I've used it before and still have my previous weldments available as parts, but I can't make new ones because I can't find the button. I've looked in both the SPH and VAB, and I've checked Blizzy's toolbar too. Ideas?

A log please, then I can tell you my idea, otherwise it is blind guessing.

Link to comment
Share on other sites
FatherLawrence

FatherLawrence

Posted
Posted
A log please, then I can tell you my idea, otherwise it is blind guessing.

I took a guess and got rid of two old ModuleManager dlls I had (backed up, of course) and the button came back and the button is back and everything works.

(for anyone curious, it was 2.2.1 and 2.5.6)

Link to comment
Share on other sites
WuphonsReach

WuphonsReach

Posted
Posted

I would suggest not trying to weld the tanks in Fuel Tanks Plus (FTP) mod. Or, at least, not trying to do welds without running the Exception Detector plugin. If you get exceptions after pressing the "Weld It" button, then you need to abort the weld and use a different part.

The stock Jumbo-64 tank also seems to be problematic - depending on how you are welding (i.e. doing surface-attach welds such as 6 tanks around a central 7th tank). This issue with surface welding also seems to affect the FTP 250cm tanks.

Link to comment
Share on other sites
jmbailey2000

jmbailey2000

Posted
Posted

I thought my issue with FTP+ was with the Fuelswitcher component, but, alas.....wrong. It is with the shrouds that automatically generate when something is added to them end of a tank. I commented out the shroud portions in the part file and was able to successfully weld FTP+ tanks (including with FS). Put the shrouds back in the parts and I can weld the tanks, they just don't work. You sit a probe on top of the tank and launch and as soon as it comes out of physics load, the probe falls right through the tank to the ground! Now I just need to figure out how to use MM to delete the shrouds from the FTP+ tanks so I can start using the awesome FTP+ tanks for my welded stations!

Link to comment
Share on other sites
FatherLawrence

FatherLawrence

Posted
Posted (edited)

I'm having a problem with extremely large welds. I'm making something that would normally have several hundred parts (all just structural panels, but makes sense why I'm running into problems) and once I've welded it, some of the parts have the wrong rotation.

This is a problem that's relatively easy to fix on smaller weldments because you can just go into the file and alter rotations until you've fixed it, but I've got hundreds of parts and I'm still not sure exactly which angles correspond to which axes in the part file (e.g. "rotation = 0, 180, 90") and whether those axes are relative to the whole vessel or just to the parent part.

Is there any way to find the 'position' value for a piece of a weldment while within the SPH/VAB? Perhaps some sort of debug tool where you typed in a position value which would create a marker at that position somewhat like the CoM/CoL/CoT markers?

Additionally, is there any way to extend the time given to the plugin to make more accurate calculations as to position and rotation? I'd be fine waiting 5 minutes per large weldment if it meant less house-keeping after.

(And is there any functional difference between x and x+n360? such as 0 and 360 or 180 and 540?)

edit: I've figured out how the position and rotation system works (position is relative to the center of mass, correct? and there is no difference between 180 and 540)

Edited by FatherLawrence
Link to comment
Share on other sites
mendahu

mendahu

Posted
Posted

Hey guys,

Just reporting a bug I hit with DMagic Orbital Science mod. Seems to only affect a specific part, the RPWS Antenna.

When I try to weld it (After selecting the part branch), nothing happens, but the part branch remains selected and I have to reload the craft to clear it. Removing this one part fixed it. Here's the log entry:

[LOG 21:31:50.260] [WeldingTool] Welding this part: rpwsAnt
[LOG 21:31:50.260] [WeldingTool]  ..part rescaleFactor 1.10
[LOG 21:31:50.261] [WeldingTool]  ..part scaleFactor 1.00
[LOG 21:31:50.262] [WeldingTool]  .Found 1 config files
[LOG 21:31:50.262] [WeldingTool]  ..Config rpwsAnt has 1 MODEL node
[LOG 21:31:50.263] [WeldingTool]  ..MODEL url: DMagic Orbital Science/Probe Science/RPWS/modelRPWS
[LOG 21:31:50.263] [WeldingTool]  ..node.HasValue("position") False
[LOG 21:31:50.264] [WeldingTool]  ..node position (0.000, 0.000, 0.000)
[LOG 21:31:50.264] [WeldingTool]  ..node.HasValue("rotation") False
[LOG 21:31:50.265] [WeldingTool]  ..node rotation (0.000, 0.000, 0.000)
[LOG 21:31:50.265] [WeldingTool]  ..node.HasValue("scale") True
[LOG 21:31:50.265] [WeldingTool]  ..node scale 1, 1, 1
[LOG 21:31:50.266] [WeldingTool]  ..Childs count 1
[LOG 21:31:50.266] [WeldingTool]  ..newpart position (-1.238, 17.618, 0.160)
[LOG 21:31:50.267] [WeldingTool]  ..newpart rotation (0.000, 0.707, 0.000, 0.707)
[LOG 21:31:50.267] [WeldingTool]  ..newpart rotation.eulerAngles (0.000, 90.000, 0.000)
[LOG 21:31:50.268] [WeldingTool]  ..newpart rotation.localEulerAngles (90.000, 180.000, 0.000)
[LOG 21:31:50.268] [WeldingTool]  ..newpart localRoot.rotation (0.000, 0.000, 0.000, 1.000)
[LOG 21:31:50.269] [WeldingTool]  ..newpart localRoot.rotation.eulerAngles (0.000, 0.000, 0.000)
[LOG 21:31:50.269] [WeldingTool]  ..position (-1.136, -7.360, 0.011)
[LOG 21:31:50.270] [WeldingTool]  ..rotation (0.000, 90.000, 0.000)
[LOG 21:31:50.270] [WeldingTool]  ..scale (1.100, 1.100, 1.100)
[LOG 21:31:50.271] [WeldingTool]  ..Config rpwsAnt has 0 RESOURCE node
[LOG 21:31:50.271] [WeldingTool]  ..Config rpwsAnt has 3 MODULE node
[LOG 21:31:50.271] [WeldingTool]  .. running in Alewx Testmode = True
[LOG 21:31:50.272] [WeldingTool]  | Module ready to add = True
[LOG 21:31:50.272] [WeldingTool]  | Module ready to add = True
[LOG 21:31:50.273] [WeldingTool]  | Module ready to add = True
[LOG 21:31:50.273] [WeldingTool]  | Module ready to add = True
[LOG 21:31:50.274] [WeldingTool]  | Module ready to add = True
[LOG 21:31:50.274] [WeldingTool]  | Module ready to add = True
[LOG 21:31:50.275] [WeldingTool]  | DMModuleScienceAnimate Module already exists!!!
[LOG 21:31:50.276] [WeldingTool]  | BreakingAttributes found = 0 
[LOG 21:31:50.276] [WeldingTool]  | DMModuleScienceAnimate - name is string
[LOG 21:31:50.277] [WeldingTool]  | DMModuleScienceAnimate - name is merged with value DMModuleScienceAnimate
[LOG 21:31:50.277] [WeldingTool]  | DMModuleScienceAnimate - animationName is string
[LOG 21:31:50.278] [WeldingTool]  | DMModuleScienceAnimate - animationName is merged with value rpwsAnimation
[LOG 21:31:50.278] [WeldingTool]  | DMModuleScienceAnimate - experimentID is string
[LOG 21:31:50.279] [WeldingTool]  | DMModuleScienceAnimate - experimentID is merged with value rpwsScan
[LOG 21:31:50.279] [WeldingTool]  | DMModuleScienceAnimate - experimentActionName is string
[LOG 21:31:50.280] [WeldingTool]  | DMModuleScienceAnimate - experimentActionName is merged with value Log Radio Plasma Wave Data
[LOG 21:31:50.280] [WeldingTool]  | DMModuleScienceAnimate - resetActionName is string
[LOG 21:31:50.281] [WeldingTool]  | DMModuleScienceAnimate - resetActionName is merged with value Discard Data
[LOG 21:31:50.281] [WeldingTool]  | DMModuleScienceAnimate - customFailMessage is string
[LOG 21:31:50.282] [WeldingTool]  | DMModuleScienceAnimate - customFailMessage is merged with value The RPWS Antenna is not suitable for atmospheric use or surface deployment, try again in space.
[LOG 21:31:50.283] [WeldingTool]  | DMModuleScienceAnimate - deployingMessage is string
[LOG 21:31:50.283] [WeldingTool]  | DMModuleScienceAnimate - deployingMessage is merged with value With the antennae retracted the sensors can't read anything, deploying the system now.
[LOG 21:31:50.284] [WeldingTool]  | DMModuleScienceAnimate - experimentAnimation is bool
[LOG 21:31:50.284] [WeldingTool]  | DMModuleScienceAnimate - experimentAnimation is merged with value True
[LOG 21:31:50.285] [WeldingTool]  | DMModuleScienceAnimate - experimentWaitForAnimation is bool
[LOG 21:31:50.286] [WeldingTool]  | DMModuleScienceAnimate - experimentWaitForAnimation is merged with value True
[LOG 21:31:50.286] [WeldingTool]  | DMModuleScienceAnimate - keepDeployedMode is float
[LOG 21:31:50.287] [WeldingTool]  | DMModuleScienceAnimate - newValue - keepDeployedMode = 2
[LOG 21:31:50.287] [WeldingTool]  | DMModuleScienceAnimate - existingValue - keepDeployedMode = 4
[LOG 21:31:50.288] [WeldingTool]  | DMModuleScienceAnimate - keepDeployedMode - added
[LOG 21:31:50.288] [WeldingTool]  | DMModuleScienceAnimate - keepDeployedMode is merged with value 6
[LOG 21:31:50.289] [WeldingTool]  | DMModuleScienceAnimate - animSpeed is float
[LOG 21:31:50.289] [WeldingTool]  | DMModuleScienceAnimate - newValue - animSpeed = 1.5
[LOG 21:31:50.290] [WeldingTool]  | DMModuleScienceAnimate - existingValue - animSpeed = 4
[LOG 21:31:50.290] [WeldingTool]  | DMModuleScienceAnimate - animSpeed - added
[LOG 21:31:50.291] [WeldingTool]  | DMModuleScienceAnimate - animSpeed is merged with value 5.5
[LOG 21:31:50.291] [WeldingTool]  | DMModuleScienceAnimate - showEndEvent is bool
[LOG 21:31:50.292] [WeldingTool]  | DMModuleScienceAnimate - showEndEvent is merged with value False
[LOG 21:31:50.292] [WeldingTool]  | DMModuleScienceAnimate - showStartEvent is bool
[LOG 21:31:50.293] [WeldingTool]  | DMModuleScienceAnimate - showStartEvent is merged with value False
[LOG 21:31:50.293] [WeldingTool]  | DMModuleScienceAnimate - showToggleEvent is bool
[LOG 21:31:50.294] [WeldingTool]  | DMModuleScienceAnimate - showToggleEvent is merged with value True
[LOG 21:31:50.294] [WeldingTool]  | DMModuleScienceAnimate - startEventGUIName is string
[LOG 21:31:50.295] [WeldingTool]  | DMModuleScienceAnimate - startEventGUIName is merged with value Deploy RPWS
[LOG 21:31:50.295] [WeldingTool]  | DMModuleScienceAnimate - endEventGUIName is string
[LOG 21:31:50.296] [WeldingTool]  | DMModuleScienceAnimate - endEventGUIName is merged with value Retract RPWS
[LOG 21:31:50.296] [WeldingTool]  | DMModuleScienceAnimate - toggleEventGUIName is string
[LOG 21:31:50.297] [WeldingTool]  | DMModuleScienceAnimate - toggleEventGUIName is merged with value Toggle RPWS
[LOG 21:31:50.297] [WeldingTool]  | DMModuleScienceAnimate - useStaging is bool
[LOG 21:31:50.298] [WeldingTool]  | DMModuleScienceAnimate - useStaging is merged with value False
[LOG 21:31:50.298] [WeldingTool]  | DMModuleScienceAnimate - useActionGroups is bool
[LOG 21:31:50.299] [WeldingTool]  | DMModuleScienceAnimate - useActionGroups is merged with value True
[LOG 21:31:50.300] [WeldingTool]  | DMModuleScienceAnimate - hideUIwhenUnavailable is bool
[LOG 21:31:50.300] [WeldingTool]  | DMModuleScienceAnimate - hideUIwhenUnavailable is merged with value False
[LOG 21:31:50.301] [WeldingTool]  | DMModuleScienceAnimate - rerunnable is bool
[LOG 21:31:50.301] [WeldingTool]  | DMModuleScienceAnimate - rerunnable is merged with value True
[LOG 21:31:50.302] [WeldingTool]  | DMModuleScienceAnimate - xmitDataScalar is float
[LOG 21:31:50.302] [WeldingTool]  | DMModuleScienceAnimate - newValue - xmitDataScalar = 1
[LOG 21:31:50.303] [WeldingTool]  | DMModuleScienceAnimate - existingValue - xmitDataScalar = 2
[LOG 21:31:50.303] [WeldingTool]  | DMModuleScienceAnimate - xmitDataScalar - added
[LOG 21:31:50.304] [WeldingTool]  | DMModuleScienceAnimate - xmitDataScalar is merged with value 3
[LOG 21:31:50.304] [WeldingTool]  | DMModuleScienceAnimate - dataIsCollectable is bool
[LOG 21:31:50.305] [WeldingTool]  | DMModuleScienceAnimate - dataIsCollectable is merged with value True
[LOG 21:31:50.305] [WeldingTool]  | DMModuleScienceAnimate - collectActionName is string
[LOG 21:31:50.306] [WeldingTool]  | DMModuleScienceAnimate - collectActionName is merged with value Collect Data
[LOG 21:31:50.306] [WeldingTool]  | DMModuleScienceAnimate - interactionRange is float
[LOG 21:31:50.307] [WeldingTool]  | DMModuleScienceAnimate - newValue - interactionRange = 1.2
[LOG 21:31:50.307] [WeldingTool]  | DMModuleScienceAnimate - existingValue - interactionRange = 2.4
[LOG 21:31:50.308] [WeldingTool]  | DMModuleScienceAnimate - interactionRange - added
[LOG 21:31:50.308] [WeldingTool]  | DMModuleScienceAnimate - interactionRange is merged with value 3.6
[LOG 21:31:50.309] [WeldingTool]  | DMModuleScienceAnimate - externalDeploy is bool
[LOG 21:31:50.309] [WeldingTool]  | DMModuleScienceAnimate - externalDeploy is merged with value True
[LOG 21:31:50.310] [WeldingTool]  | DMModuleScienceAnimate - sitMask is float
[LOG 21:31:50.310] [WeldingTool]  | DMModuleScienceAnimate - newValue - sitMask = 48
[LOG 21:31:50.311] [WeldingTool]  | DMModuleScienceAnimate - existingValue - sitMask = 102
[LOG 21:31:50.311] [WeldingTool]  | DMModuleScienceAnimate - sitMask - added
[LOG 21:31:50.312] [WeldingTool]  | DMModuleScienceAnimate - sitMask is merged with value 150
[LOG 21:31:50.312] [WeldingTool]  | DMModuleScienceAnimate - bioMask is float
[LOG 21:31:50.313] [WeldingTool]  | DMModuleScienceAnimate - newValue - bioMask = 0

Anyway, I'm ok for now, but thought you'd want to see it.

Link to comment
Share on other sites
  • 2 weeks later...
Redchrome

Redchrome

Posted
Posted

Hi, I've been away for a bit, but I've got a simple-but-serious bug with welding which you should know about.

On Linux, when you create a new welded part, it doesn't go into the expected folder (~/.local/share/Steam/steamapps/common/Kerbal\ Space\ Program/GameData/UbioWeldingLtd/Parts/) but instead a wholly new directory outside the Steam tree, and instead rooted on the user's home directory. The parts end up in ~/GameData/UbioWeldingLtd/Parts/.

I have a saved KSP.log file run while the debug log was on, which I can mail if someone asks for it.

Link to comment
Share on other sites
HafCoJoe

HafCoJoe

Posted
Posted

Hello! I have returned. I'm looking to see if there is an easy way to remove the "lifting" aspect of wings when welding them together? I would like to weld the body of a plane with extensive use of wings in the body work, and remove the lift from the body. Is this possible through config editing? I've already been deleting modules and node attaches from the config files. If there is now way to edit the amount of lift, do you think you could make a way to do this in an upcoming update? Another thing I suggest is a button you can press to reload the database. That would make config editing a lot easier. :P

Link to comment
Share on other sites
Redchrome

Redchrome

Posted
Posted

I note that if you make a craft, push the button to 'Weld It!' and then click 'cancel' when you're at the dialog where you fill in the parameters of the weldment, the welding dialog goes away, but so does the part assembly you were working on!

I'm running KSP 0.90 on Linux.

Link to comment
Share on other sites
Yargnit

Yargnit

Posted
Posted

I don't suppose anyone would be able to assist me with getting huge welded pieces to float? It appear that welded parts aren't having their buoyancy calculated correctly based off their new physical size or something? So now they weigh 10, 100, or more times what they used to, but are still only as buoyant as the original part or one of the parts, or something? I'm not sure exactly, but trying to make floating bases even though they are merged out of empty fuel tanks, which should easily float, they sink like a rock even after drastically reducing their weight. (which I don't want to do because I don't want to really be cheating by merging)

Link to comment
Share on other sites
skiparay

skiparay

Posted
Posted

Im attempting to weld a part with multiple texture options (like the B9 structural panels where you can right click on it and select "next/previous version). When I weld it, however, the part loads fine but the textures will rapidly flick through the different options. Is there a way of telling the mod to only use the texture that you have selected?

Thanks

Link to comment
Share on other sites
Mapoko

Mapoko

Posted
Posted (edited)

Hello,

I have just a simple and possibly stupid question :

So, with this mod I build my lifter for 100t for example, then wield all the parts together, then save it (like subassembly, but making it 1 whole part) and then when I want to lift 100t part the total part count will be payload+1 ?

Or simply wield together my station modules, so core + 6 module station will be 7 parts instead of 150 ?

This will add to loading time, but will help with fps later ?

Edited by Mapoko
Link to comment
Share on other sites
ManuxKerb

ManuxKerb

Posted
Posted

Hi,

Can this mod be used with USI Colonization Mod ? I want to decrease my space station parts count because pf physiscs calculations! Do the modules funtion after welding ? Like adding resources and stuff.

Also the mentioned memory footprint converns me.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing
×
×
  • Create New...