mystifeid

Duna - completed using a separate stock KSP 1.44 install - no added mods. Start and finish at 0°N 14°E - Landing zone just to the north The 16 wheeler strikes again. Duna is a challenge mainly for the effort involved in staying awake. Several times I dozed off with my finger panted solidly on the forward button (keypad 8). The planet is definitely suited to the use of Mechjeb and I missed it sorely. Speed was dictated by biome. The Midland Sea provided opportunity to fire up the verniers and reach 70-75m/s. The Lowlands were a solid 55m/s and while the Midlands could mostly be traversed at that speed, occasionally required slowing to 40m/s. The Highlands were generally dangerous at anything over 30m/s. Duna is one of the few places where the night feels almost as comfortable for driving as the day and the only time I stopped was to wait for reconnection to my relay sat for the Kerbnet access to mark my route. Total mission time was 1 year 47 days. The time for the circumnavigation itself was around 6 days. Playtime was spread over multiple days and I can only estimate it as being 20+ hours. More screenshots:

ISRU's ignore this rule so if the rover can mine and convert ore, all attached fuel tanks will be refilled irrespective of the use of the grabber for docking.

This. Not sure what I was thinking. Too much KSP and not enough sleep.

Re-rooting is pretty easy.

It looks like the other pieces were added after the corner piece so you could try changing the root part to the part just to the left of the corner then after you've finished changing things, set the root part back to the original.

Well done and I don't wanna rain on your parade but a second faster might have been good.

Could get trickier after this - 14min 59 sec. No mods. No clipping. One Terrier on one Skiff on fifty-five Mammoths. Engines in the VAB On the pad Liftoff Taking screenshots interferes with staging Hot Staging fourth and fifth last Mammoths Last Mammoth Skiff Terrier Speed (and time) at engine cutoff. This is gonna hurt

16mins 44secs A terrier... ...on a skiff... ...on 73 mainsails

Moho - completed using a separate stock KSP 1.43/1.44 install - no added mods. Start and finish at 0°N 140°W - Landing zone just to the north. I can't remember the last time I used Alex Moon's transfer planner to travel to Moho but for some reason, it kept giving me a really bad transfer. Or maybe it was me that was bad. So I went back to Olex's guide and took a considerably earlier window and managed to send a relay sat and my rover into orbit around Moho. Without trying to conserve fuel at all, the rover did it (orbit to orbit) with a dV of 5700m/s which is not too terrible for me. I must have messed up the relay sat because it took about 7400m/s and only just made orbit with about 500m/s left to maneuver. When I was braking the rover at about 20km above Moho I started thinking about moving the Kerbals into their command seats and had a real bash my head against the wall moment when I saw that somewhere along the line the Kerbals had jumped out of the ship - somehow I'd lifted off without them. Great. Had to send a third ship to Moho. I'd already done some rovering through the North Pole biome and found it to be fairly horrific with lots of mountains and abrupt inclination changes. The expectation was for more of the same around the equator and as luck would have it, my landing zone was in the Highlands so I was not disappointed. The gravity on Moho is weak enough to be able to jump off the surface easily but, in rugged terrain, strong enough to then cause instant regret. Moho seems to resonate with the ghosts of thousands of wrecked rovers. The terrain became more and more forbidding on my route and there was little point in trying to avoid anything because the effort often resulted in meeting something worse than the original obstacle. My course was a pretty straight line at very slow speeds and I started to despair that I would ever finish. Then suddenly the Highlands gave way to the Midlands. The mountains flattened into hills and open spaces appeared. Just briefly though. Before long I was back crawling through the Highlands. But at about my halfway point I came back into the Midlands with interspersed craters. Now the terrain really flattened out and became a racetrack. In the Midlands I was able to sustain 50-60m/s but in the black craters it was even better and I kicked my verniers into life to achieve 100m/s several times but after a while decided to keep it to 80m/s. It was possible to keep these speeds for maybe 40km at a time and do it nearly hands free. There were perhaps half a dozen of these black craters and after each one it was hard to concentrate such was the exhilaration. So I drove like a madman for the second half of the circumnavigation and fortunately did not encounter any more Highlands until about 100km short of my goal. Moho is a place where I think it is actually better not to use Mechjeb. There are constant changes in speed and direction required as well as a need to be always looking ahead from a significant height above the rover. My rover is huge and can land itself in Moho's gravity without me making much adjustment so even the Mechjeb's stability control becomes superfluous. Compared to the other circumnavigations I've done, Moho makes the others feel like a walk in the park. Moving through the Highlands is very stressful but I can promise you that the speed through the other half will more than make up for it. Three or four times I drove into the night and was extremely unwilling to continue in low light. There is a long delay waiting for the planet to rotate enough to bring the next morning. My total mission time was around 513 days. Since my play time was broken up into shorter sessions over three or four days I can only estimate it at 20 -30 hours. More screenshots:

Still looking for the right angle on Moho... "I'm starting to hate this place." "Yeah, we're never going to find the right angle." "Isn't that Kerbin straight ahead?" "Punch it."

Too much science on normal difficulty? You can try tweaking your difficulty settings next time. My last career took something like 550 completed contracts before I'd researched and bought just the stock tech tree - strangely enough, it helped to make it the most enjoyable game I've played.

Looking for the right angle on Moho... "Is that it?" "Nope. That's not the right angle. Punch it." "There's something about the bumps on Dres that scare the p*** out of me." "I feel ya." "Really?" "Yeah, look where you're aiming."

You can use Alex Moon's Launch Window Planner ... and I just used Olex's Interactive illustrated interplanetary guide to send three ships to Moho so it has to be good! The easiest way is to install Mechjeb.

You're right - it's not nearly as good looking as I remembered. Wishful thinking. I have updated my post accordingly.

Phew. Thought it might have been a bad dream for a second. Ok to pin badges in my sig?

You might have to explain that one to me.

Kerbin - completed using a separate stock KSP 1.43 install - no added mods. Start and finish at KSC. I meant to do something easier like Ike but I started wondering how to make a boat fast enough to go around Kerbin. Three hours later I was 30° east of KSC doing 100m/s and figured I might as well keep going. It seems that water is much the same as solid ground in that going faster than 100m/s is a good way to invite catastrophe so I spent the trip slowly throttling back after each time I filled the tanks and I still don't know how fast the boat could go. It is an ugly thing with a drill sticking out of a cargo bay but remember that I never actually meant to start this challenge. The four panthers were used in three ways - four, two and zero afterburners on - depending on the weight of fuel being carried and my desire to stay under 100m/s. With full tanks and all afterburners on, the boat accelerated straight to 91m/s and hit 100m/s after using 10% of the fuel. Two underwater canards, when activated, lift the front of the boat out of the water and make pitch trim adjustment unnecessary. They also help to significantly speed up the boat. However I wondered whether you could achieve the same just by using pitch adjustment on the engine gimbals. I suspect that this is possible but would mean constant adjustment to the pitch trim as well as the throttle. The boat was self sufficient - carrying a drill and an ISRU. I stopped to refuel seven times with each time taking around 6 days game time although I usually had ten to twenty percent of my fuel remaining when I did so. The last twenty percent would probably cover 300km at 100m/s. One land crossing was necessary via some lakes at the most northerly part of the route seen below and my speed on land was kept around 30m/s. If it was possible to travel straight around the equator at this speed, this would have been a quick and easy task but as it was, it took about 20 hours IRL (including several hours to build and test the boat) and 46 days game time. More screenshots:

Pitstop on Dres Dres - completed using a separate stock KSP 1.43 install - no added mods. Start and finish at 0°N 100°E - Landing zone just to the north. The Mun might have craters but Dres ... Dres has bumps. Lots and lots of bumps. Even the flats have bumps. It has so many bumps it's difficult to accelerate because contact with the surface is continually being lost. The usual strategy is to wait for any uphill ground before putting the pedal to the metal. It's also impossible to look ahead beforehand. The terrain requires constant adjustments to the attitude of the rover and in contrast to the Mun, perfect landings matter because landing out of shape reduces speed. Skewed landings can come in handy though, for those times when descents from the Highlands with depleted monopropellant have increased speed to 60+m/s and the rover starts bouncing higher and higher. Slight skids and locked on brakes might save you in those situations. Maybe. But most of the time a 40m/s speed seems to be optimum and the overwhelming majority of the trip is spent above the surface. Just a quick bounce and it's back up again. Just need to keep that speed up otherwise you start hitting ten times as many bumps and the stress is magnified. So, perfect landings every time. It's very hard to maintain a straight course. Almost total concentration must be given to the rover attitude and in ten seconds it's easy to veer ten, twenty or even thirty degrees off course without realizing it. On the plus side there were very few drops so big that I needed to use rcs to slow my descent. Maybe half a dozen. One of the things I really miss with the unmodded install is a readout of the height above terrain but I'm guessing that heights around 100m were no problem at 40 - 50m/s. With 16 wheels. And not forgetting the perfect landing. Instead of equipping the booster as a relay, this time I just took a separate relay sat and put it in a fairly eccentric orbit. Since it became nearly impossible to drive in low light with any speed at all, almost the whole distance was covered with Kerbol reasonably high in the sky. Finally though, I was able to fire up the verniers in anger - twice on some flats and once on a steep climb. For anyone considering circumnavigating Dres - try a polar route - there is a very large flat area that could be included and which extends for about 20% of route. The equatorial route misses it completely. Total mission time was around 2 years 47 days and around 13 hours IRL. Mission time for the circumnavigation was approximately 7 days. My route on Dres was pretty featureless - one place looks much the same as anywhere else and since it's nearly impossible to keep a rover on the surface, what follows are a lot of screenshots with my rover flying through the sky. (Jeb nearly died a hundred times taking these.)

@rkarmark - what happens now? Am I a Mun and Minmus circumnavigator? (ie do I take the badges?)

I imagine so. I'm not sure how you would cross something like Kerbin's oceans without them.

Mun - completed using a separate stock KSP 1.43 install - no added mods. Start and finish at 0°N 59°E - Landing zone just to the north. Same rover used as on Minmus - a 16-wheeler with rcs and two verniers. This time I did fill the fuel tanks and almost immediately regretted it. Very occasionally I did get to 55m/s (about the speed where the engines might be used) but soon afterward was usually slowing to a crawl at the lip of a crater. There was just no real opportunity to use the verniers and the extra weight of the fuel was just dangerous given the number of craters I didn't see until I was flying over them. So I gradually burnt the fuel as soon as I could. If the verniers had been vertically mounted they would have been useful. As it was, Rcs saved me more times than I care to remember and I stopped several times to replenish the tanks. The first half of the trip I found difficult but slowly fell into a routine and stopped trying to micromanage my landings as much so things became slightly easier. I really like this rover because it has a tremendous capacity for correcting itself and mostly I only got into trouble when I interfered with it too much. The second half of the trip also had a few more long stretches without craters smack in the middle of my route. (Once again I managed to keep mostly within half a degree of the equator.) This time I equipped the booster with a probe core, battery, solar panels and relay antennae so that I was not so reliant on having line of sight to Kerbin to mark my route with Kerbnet. And I left Val in one of the cans. Again though, when the sun started getting too low in the sky I time warped to the next morning. Total mission time this time was around twenty-eight days and around fourteen hours IRL. Not only was the distance around the Mun a lot greater than Minmus but it felt like my average speed was considerably slower. This one was a grind - too many craters - and I'm glad I don't have to do it again. More screenshots:

Minmus - completed using a separate stock KSP 1.43 install - no added mods. Start and finish waypoint - Kerman's Prize (see below). Landing zone was just to the south. Resisted the temptation to follow the flats for as long as possible and stayed within a half degree of the equator for the circumnavigation. The rover is a 16-wheeler with rcs and two verniers - however the fuel tanks were never filled and the engines were not used. The trip was completed at speeds that were almost always below 50m/s - a speed which the wheels themselves are easily capable of achieving. I did not have any relay satellites and sometimes had to time warp to a position where I had line of sight for my aerial to Kerbin to enable Kerbnet access. Generally I would also wait until I was in sunlight. Total mission time was about 17 days game time and three hours IRL. The Kerbals were transported in two lander cans just above the booster and transferred to the command seats just before landing. More screenshots:

It's quite difficult to break one of these panels at KSC. I've managed it twice out of about thirty attempts. Impact elsewhere doesn't work as the part it's attached to has a lower impact rating than the panels - as do other parts. So ramming things is out. Even the one time I managed to just destroy the cupola by running over the bumps in front of the VAB, the panels were fine. A soft roll doesn't work because the monopro tanks hold the rover up enough to protect the panels. A hard roll and everything explodes. Rolling it with just the right speed/turn, I can break a panel without destroying anything else. So what. Drove it around for a while and everything was fine. There is a very fine clearance between the panels and the cupola and I wondered if there was a scenario where they came in contact and if that was possible, whether the panels wouldn't just pass through the cupola without damage anyway.

Put a 16-wheeler on Tylo and drove it 1000km to pick up the Kerbals before starting the 1200km trip to the cave. It has two verniers for the hills and driving it without risk means keeping it down to 80m/s although it handles well up to 100m/s. Faster than that and bumps will eventually push it around in a very soft 180° slide. Either that or something will explode. So far it has survived a 30m jump above the surface at speed. I thought I'd get bored quickly but going that fast is fairly gripping. I probably look like my pilot in the middle below.

I've just finished a 1000km+ trip on Tylo trying to maintain speeds of 80 - 100m/s (rocket assist) with four of these puppies without breaking them. I noticed that the wheels on your 15t rover are using the default spring and damper strengths of 1. You may find that you get more resilience and much less bounce if you increase both of these settings to 2. Also, and I'm not sure if it has any bearing on the fragility of your solar panels but both of them are clipping a rung on the adjacent cupola module.