Jump to content

[1.4.x] TweakScale v2.3.12(Apr-16)

pellinor

By pellinor
in KSP1 Mod Releases

 Share

Recommended Posts

OmegaCenti

OmegaCenti

Posted
Posted

Yep, still experiencing problems with TweakScale. The behavior now is with craft files. If the craft files were saved before 1.52.1, the part costs on tweakable parts are zeroed. This means that crafts will need to be rebuilt with the parts from the part catalog in order to experience costs. Not sure if I can word this better, but I will try to edit it if this is unclear.

Link to comment
Share on other sites
futrtrubl

futrtrubl

Posted
Posted
Yep, still experiencing problems with TweakScale. The behavior now is with craft files. If the craft files were saved before 1.52.1, the part costs on tweakable parts are zeroed. This means that crafts will need to be rebuilt with the parts from the part catalog in order to experience costs. Not sure if I can word this better, but I will try to edit it if this is unclear.

Not near my game to test, but try remove and replace, or reroot, that may be enough of a rebuild to make it work.

Link to comment
Share on other sites
AlonzoTG

AlonzoTG

Posted
Posted

Hey, I'm getting significant breakage here. I'm trying to create a tower of 10M tanks for life support resources. Ok... I had to edit defaults config... The version that was briefly out, worked great for 10m, previously and now I'm back to editing the config file myself... Anyway, I get the design in the VAB... good, put it on the pad (or EL construct it) and it rezes up normal, then switch away or the game crashes and I come back, and it is completely and utterly glitched out. On the EL construction site, only the lower of the two tanks is glitched, on the launchpad I have just a single tank hovering, all of the decorations and secondary equipment is gone. =\

Link to comment
Share on other sites
Gaalidas

Gaalidas

Posted
Posted

One question: by "max/minScale is obsolete" do you mean that it is now simply not necessary or that it is now not even functional? I worry about older configs not responding as expected... not that it's happening just yet, but then again I have yet to test all of my parts that have a tweakable scalability setting on them.

Link to comment
Share on other sites
pellinor

pellinor

Posted
  • Author
Posted

The DefaultScales.cfg file provides examples how I would do it. Define the scaleFactors just like you would before for a discrete scaleType, these are the numbers you can reach without using the slider. Highly grained means large steps? You can do this with the slider increment, either globally or separately for each interval. For example the default stack config snaps to 0.1m increments for the largest sizes to allow for round numbers.

If you have any configs that do not give the result you want, I'll gladly look through them.

Link to comment
Share on other sites
Kolago

Kolago

Posted
Posted

After Updating from 1.50 to 1.52.1 on a mod heavy install I get this error and loading stops:

IndexOutOfRangeException: Array index is out of range.
  at TweakScale.GoodspeedTweakScale.Setup () [0x00000] in <filename unknown>:0 

  at TweakScale.TweakScale.OnLoad (.ConfigNode node) [0x00000] in <filename unknown>:0 

  at PartModule.Load (.ConfigNode node) [0x00000] in <filename unknown>:0 

  at Part.AddModule (.ConfigNode node) [0x00000] in <filename unknown>:0 

  at PartLoader.ParsePart (.UrlConfig urlConfig, .ConfigNode node) [0x00000] in <filename unknown>:0 

  at PartLoader+.MoveNext () [0x00000] in <filename unknown>:0 

(Filename:  Line: -1)

IndexOutOfRangeException: Array index is out of range.
  at TweakScale.GoodspeedTweakScale.Setup () [0x00000] in <filename unknown>:0 

  at TweakScale.TweakScale.OnStart (StartState state) [0x00000] in <filename unknown>:0 

  at Part.ModulesOnStart () [0x00000] in <filename unknown>:0 

  at Part+.MoveNext () [0x00000] in <filename unknown>:0

Link to comment
Share on other sites
pellinor

pellinor

Posted
  • Author
Posted
One question: by "max/minScale is obsolete" do you mean that it is now simply not necessary or that it is now not even functional? I worry about older configs not responding as expected... not that it's happening just yet, but then again I have yet to test all of my parts that have a tweakable scalability setting on them.

At the moment min/max values are still used if TweakScale does not find any scaleFactors. So everything is still backwards compatible. (Maybe ksp 1.0 will be a good point do drop obsolete stuff like this)

Link to comment
Share on other sites
Kolago

Kolago

Posted
Posted
After Updating from 1.50 to 1.52.1 on a mod heavy install I get this error and loading stops:

IndexOutOfRangeException: Array index is out of range.
  at TweakScale.GoodspeedTweakScale.Setup () [0x00000] in <filename unknown>:0 

  at TweakScale.TweakScale.OnLoad (.ConfigNode node) [0x00000] in <filename unknown>:0 

  at PartModule.Load (.ConfigNode node) [0x00000] in <filename unknown>:0 

  at Part.AddModule (.ConfigNode node) [0x00000] in <filename unknown>:0 

  at PartLoader.ParsePart (.UrlConfig urlConfig, .ConfigNode node) [0x00000] in <filename unknown>:0 

  at PartLoader+.MoveNext () [0x00000] in <filename unknown>:0 

(Filename:  Line: -1)

IndexOutOfRangeException: Array index is out of range.
  at TweakScale.GoodspeedTweakScale.Setup () [0x00000] in <filename unknown>:0 

  at TweakScale.TweakScale.OnStart (StartState state) [0x00000] in <filename unknown>:0 

  at Part.ModulesOnStart () [0x00000] in <filename unknown>:0 

  at Part+.MoveNext () [0x00000] in <filename unknown>:0

Exchanging GoodspeedTweakScale with TweakScale helps to eliminate the problem:

@PART[*]:HAS[@MODULE[GoodspeedTweakScale]]:FIRST
{
	@MODULE[GoodspeedTweakScale]
	{
  	%name = TweakScale
  }
}

Link to comment
Share on other sites
Lekke

Lekke

Posted
Posted

When I use a scaled up part it's fine on launch but when I reload the scene with that vessel the rescaled parts have all reverted to their originial size. Is there a fix for that?

Link to comment
Share on other sites
pellinor

pellinor

Posted
  • Author
Posted (edited)
Exchanging GoodspeedTweakScale with TweakScale helps to eliminate the problem

I'm surprised that this legacy module is still in use. Which mod does that config come from?

Would it be possible for the FX scaling of engines to support smokescreen?

Any idea what would be needed to support that? If it can be done with a simple config then I'll gladly include it.

When I use a scaled up part it's fine on launch but when I reload the scene with that vessel the rescaled parts have all reverted to their originial size. Is there a fix for that?

For the root part there is no fix (this is a KSP bug). For other parts, I can't reproduce any reverting.

Edited by pellinor
Link to comment
Share on other sites
Astrofox

Astrofox

Posted
Posted

Is their a config for making the science experiments tweakscaleable.

(procedural parts/fairings works w/ tweakscale if you install them together at the same time - just so you guys know.)

Link to comment
Share on other sites
AccidentalDisassembly

AccidentalDisassembly

Posted
Posted
Is their a config for making the science experiments tweakscaleable.

(procedural parts/fairings works w/ tweakscale if you install them together at the same time - just so you guys know.)

You could make science experiments tweakable, but there's no point - nothing in the science experiment will change with size, I don't think.

Link to comment
Share on other sites
smjjames

smjjames

Posted
Posted
You could make science experiments tweakable, but there's no point - nothing in the science experiment will change with size, I don't think.

Some (all?) of Dmagics science stuff can be tweakscaled, and yeah, changing the size only affects the weight of the part, the science is unaffected.

Link to comment
Share on other sites
Cdr_Zeta

Cdr_Zeta

Posted
Posted

Hello,

First let me say I wish I knew beforehand that TS has TSE which scales rates; I have to look at my resource rates for the size in question of my model now; luckily I havnt got to bogged down with to many rates on too many parts; the whole reason I am using this is to save valuable game memory; at least this will come in handy for storage parts and module generators with resource rate changes being a little more advanced isnt such a big deal; I finally had to read the manual to understand rate effects and how to control them; I will be fixing my parts hopefully to look as good as they work now; that is whenever I get them to work (!) they keep breaking !

I am in total agreement that MODS should have their own TS-data; this is probly gonna be one of the best MODS out there; I got one part that has 7 or so versions; now with this and fuelswitch I have 1 part with 7 versions + 3 sizes each (!); well just ALOT more flexibility.

As for Science; effects; it gets more technical probly. One can always write a module generator in the Science part and reflect a rate change (!); maybe.

Cmdr Zeta

Link to comment
Share on other sites
odmonk

odmonk

Posted
Posted
I'm surprised that this legacy module is still in use. Which mod does that config come from?

At least Goodspeed Aerospace Parts for one, from which TweakScale originated I believe. The current status is that it works with 0.90 but you have to use a patch to deal with the mild texture rearrangement of 0.25 KSP; I just modified my copy of that patch as suggested by Kolago to deal with this issue with modern TweakScale support and KSP started loading again. (I just posted over in that thread Kolago's fix for the problem.) I'm still testing the results before starting up my new career game.

Link to comment
Share on other sites
Shienth

Shienth

Posted
Posted

I'm having an issue where a part keeps reverting to default size, in this case 1.25m. I've tried changing the values on the parts Tweakscale module, with no effect. The part is mechanically still 3.75, at least in capacity, so it's maybe just a visual bug? I've reproduced it, by reverting to a backup and launching again, too.

Save, craft file, persistant.sfs: https://www.dropbox.com/sh/7wex0e3g10w0ly0/AADkDgUG-f2q62OgZ9UauznXa?dl=0

Image: http://i.imgur.com/AX49DPA.png

Link to comment
Share on other sites
stali79

stali79

Posted
Posted

There is 2 mods I would love to see added to TweakScale compatability. K.Yeon's OPT and PolecatEZ's D12 Aerotech, namely its the wings I am hoping can become rescalable. I know that I COULD write my own config but as I am not a coder or a programmer it is beyond the scope of my capabilities, I have tried but it is too confusing for me.

Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing
×
×
  • Create New...