Frank_G Posted April 16, 2014 Share Posted April 16, 2014 Ive just launched Bill, Bob and Jeb in the Kraken-Catcher Mk. I to try the Claw on the Dead Kraken on Bop... Quote Link to comment Share on other sites More sharing options...
Fizwalker Posted April 16, 2014 Share Posted April 16, 2014 So... I started a new career game with the FASA mod, and after killing Bill and Jeb through horrible accidents in re-entry... (Horrible because I gained no science from them... =P) I finally came up with a design that works... Mostly. I sent Bill up, (after many tests with the various modes of the escape towers installed....) to collect science from orbit. Launch wasn't quite what I planned... But a westerly heading ended up getting me above the atmosphere. With deadly re-entry installed, I came in a little hot... But not hot enough to burn up. So... Coming down and the re-entry effects are done... That's when I see that I am at a mere 4k meters..... I punch the protective cover off my 'shute and release it. I recall some people trying to find the High Gee Death machines somewhere else on the forums..... If they're reading this thread.. I want to let you know I've found one. That's right, Bill's guts are splattered around his ship... But the science survived!! Rest in Peace Bill, but know that your death wasn't in vain! Quote Link to comment Share on other sites More sharing options...
Alymon Posted April 16, 2014 Share Posted April 16, 2014 I launched a rover into orbit around Kerbin. Next step is the transfer burn to Mun and then hopefully a landing near my Mun base.I probably should've included space for 2 Kerbals on the rover since there are 2 in the lander and if my precision on landing is off it's going to be a pain to get them to my Mun base landing site.Oh well. I'll just have to be really good at landing. (I've never landed in the same area twice before, so it should work out fine, right?) Quote Link to comment Share on other sites More sharing options...
Demon_82 Posted April 16, 2014 Share Posted April 16, 2014 I tried to launch again my "Discovery" ship. Every single ship I name that way ends up doomed. This one even bugged my game, so I went back to a previous save game. You could say I travelled back in time. Quote Link to comment Share on other sites More sharing options...
Floppster Posted April 16, 2014 Share Posted April 16, 2014 I finished up my Olympus Outpost currently housing Bill, Bob and Jeb for maintenance. They'll stay there for a couple of days to make sure that everything is working correctly before returning to Kerbin in the crew shuttle. Quote Link to comment Share on other sites More sharing options...
Wooks Posted April 16, 2014 Share Posted April 16, 2014 (edited) I uploaded episode 13 of "Rover Adventures - Around Kerbin", I´m half of the way around the planet and about to reach South Pole soon! Edited April 16, 2014 by Wooks Quote Link to comment Share on other sites More sharing options...
Rakaydos Posted April 16, 2014 Share Posted April 16, 2014 Baby's first Whackjob. (that's 4 stages in) Quote Link to comment Share on other sites More sharing options...
cantab Posted April 16, 2014 Share Posted April 16, 2014 Periapsis kicking the Nobel 1.It's over 700 parts, 70 tons fully fuelled (the small tanks are all empty from the start being just structural, but there's a lot of them), and has one nuclear engine.Four 4-minute burns, each taking more like 16 minutes wall time, leave me with an apoapsis around halfway to Minmus and 250 m/s or so left to do.Note to self: In future reduce part counts and add engines. Quote Link to comment Share on other sites More sharing options...
Commissar Posted April 17, 2014 Share Posted April 17, 2014 -snip-I like using mod parts for that very reason. i can do a 120+ton tanker in 2 dozen parts or so. i can launch it using about a hundred parts or so. none are "better", just different. usually scaled up, and about balanced with stock. I haven't done a true asparagus launcher since I started using the NovaPunch 5m parts for the 1st stage core. really cuts down on the part count (meaning less physics load), and results in far fewer catastrophic failures. less tedious to build as well. Quote Link to comment Share on other sites More sharing options...
Vostok Posted April 17, 2014 Share Posted April 17, 2014 I tried to use a kerbal as a rotational bearing by having him ragdolled and grabbed by two claws at once. Turns out the game doesn't like this very much. Quote Link to comment Share on other sites More sharing options...
Rakaydos Posted April 17, 2014 Share Posted April 17, 2014 http://i.imgur.com/DApaHKi.pngBaby's first Whackjob. (that's 4 stages in)So I got this thing to Layth orbit, before I discovered a screwed up my lander design. :/ Quote Link to comment Share on other sites More sharing options...
maccollo Posted April 17, 2014 Share Posted April 17, 2014 I finished my Venus lander.Yes.Venus.This lander is capable of taking one Kerbal through aerobreaking, down to the surface, and back up to orbit again. It consists of 400 parts and weighs 620 tons. Actually I lied. It's not completely done yet. I still have to figure out how to get the Kerbal from the capsule to the ground and up once I have landed. Quote Link to comment Share on other sites More sharing options...
Liowen Posted April 17, 2014 Share Posted April 17, 2014 I uploaded episode 13 of "Rover Adventures - Around Kerbin", I´m half of the way around the planet and about to reach South Pole soon!I had thought about trying this with one Kerbal, but the rover could cross water on it's own(AKA The Rove-Boat). I am still fine tuning the craft yet though, and figuring out my driving style also as it is very touchy. I was going to ask if that would offend you if someone else did something similar or not, so here is my chance hehehe Quote Link to comment Share on other sites More sharing options...
KerbMav Posted April 17, 2014 Share Posted April 17, 2014 Landed the Kethane Lifter transport next to No-Longer-Mobile Kethane Mining base - getting better at pinpoint landings, at least in low-g environments like Minmus?Experiment by engineering corps to launch a new interplanetary exploration ship in one piece went totally wrong. Prototype was a 100% loss, test pilots escaped with parachutes, but Bob Kerman failed to report in, search parties have been assembled, hopefully he will find his way home soon.Disconnected the crew module/lander from my Munar Kethane Base and prepped the one man crew for the voyage home.Psychologists first had to convince Ergel Kerman that he is indeed a Kerbal - after so many months alone at the base he thought of himself as a "base" - two units of notepad+ intrasave fixed him. Quote Link to comment Share on other sites More sharing options...
Jouni Posted April 17, 2014 Share Posted April 17, 2014 I finally started my single-launch Tylo mission.The launch was quite typical for my recent missions. The upper stage has to be big enough to complete the escape burn, and the rest of the rocket is designed around that. This time it meant a four-booster SLS with an extra large upper stage.I'm starting to like the KR-2L as a vacuum engine. When a transfer burn to Jool takes less than two minutes, something is obviously right.After dropping the upper stage (and redirecting it to hit Jool), the ship moves around with lander engines. Using separate transfer engines would just have been too inefficient. If the lander fails to come back, the command module can return to Kerbin using the orbital maneuvering engines in the drop tank (and some gravity assists).I made two mistakes after the transfer burn: I didn't match Jool's inclination, and decided to aerobrake at Jool instead of Laythe. My initial orbit around Jool had 120-degree inclination, making it pretty hopeless to approach Tylo. The cheapest way of getting the inclination down to 0 degrees was aerobraking at Laythe, after which it was easy to transfer to Tylo. After circularizing to a 60 km orbit, I estimated that I would have almost 3500 m/s of delta-v for the return trip, or 3000 m/s if I don't ditch the drop tank. That was surprisingly much, considering how much I had to fool around to set up the encounter with Laythe. Quote Link to comment Share on other sites More sharing options...
Tortoise Posted April 17, 2014 Share Posted April 17, 2014 Docked another piece to my space-station. Quote Link to comment Share on other sites More sharing options...
DunaRocketeer Posted April 17, 2014 Share Posted April 17, 2014 Continuing my long range aircraft development. I didn't do much in KSP, but I watched a documentary about the Rutan Voyager and decided that a non stop round the world flight would make a fun challenge! Quote Link to comment Share on other sites More sharing options...
DeepSpaceDutch Posted April 17, 2014 Share Posted April 17, 2014 Yesterday I continued where I left of earlier this week ( http://forum.kerbalspaceprogram.com/threads/29533-What-did-you-do-in-KSP-today?p=1093159#post1093159 ), getting my intrepid Kerbals from Gilly, via Eve, back to the homestead of Kerbin;The long burn out of Eve's SOIAnd a lovely view during the Kerbin AerocaptureDetaching the Gilly Lander from the Science Package/Transfer Module (forget to take screenshots of the splashdown into the Kacific Ocean)After the Gilly Lander made a safe splashdown it was time for the Science Package to deliver it's precious cargo of Science pointsWhen the parachutes deploy the Transfer Stage was released for a controlled crash into the waterWith the Science gained during this mission I have now unlocked everything I need for a Class D Asteroid Catcher, next project is a huge Asteroid Base/Orbital Kethane Refinery Quote Link to comment Share on other sites More sharing options...
WillHop Posted April 17, 2014 Share Posted April 17, 2014 (edited) I sent an aquatic base to Laythe using the radial intakes as floats The base in all its gloryHard at work!The team pose for a photoJool as seen from the CupolaI plan on sending them a jetski to play with, complete with a claw for all of my docking needs. Edited April 17, 2014 by WillHop Quote Link to comment Share on other sites More sharing options...
NecroBones Posted April 17, 2014 Share Posted April 17, 2014 After dropping the upper stage (and redirecting it to hit Jool), the ship moves around with lander engines. Using separate transfer engines would just have been too inefficient. If the lander fails to come back, the command module can return to Kerbin using the orbital maneuvering engines in the drop tank (and some gravity assists).I like that solution. I'm doing my Tylo mission now as well. I went for a brute-force method for the lander, which will range from 2.3 to 4.1 TWR (Tylo gravity), depending on the stage. But it's a stupidly heavy lander, I think, at 70 tons. I built it more like an Eve lander. The interplanetary-stage is showing that it's down to 1 km/s of dV left after getting into a rather lop-sided elliptical orbit around Tylo (after a nice free aerobraking maneuver around Jool that shot me out almost directly at Tylo, but still needed a heavy insertion burn). But that 1k of dV is with the heavy lander attached. Once that's gone, the ship will considerably lighter with better dV. If I'm still too low on fuel for the return trip, I still have a few fallbacks. The Kerbin return lander has some decent dV in it, and I also have a rescue ship on standby in Jool orbit, from a previous mission where it wasn't needed.Now in orbit:On the pad before launch:Lander's stats: Quote Link to comment Share on other sites More sharing options...
TimePeriod Posted April 17, 2014 Share Posted April 17, 2014 Worked on some secret rail-gun mod, shhh... Quote Link to comment Share on other sites More sharing options...
Bagface145 Posted April 17, 2014 Share Posted April 17, 2014 In my file, the first Kerbal went into orbit around Minmus Quote Link to comment Share on other sites More sharing options...
Concentric Posted April 17, 2014 Share Posted April 17, 2014 Sent Jeb to Duna in an almost-entirely untested rocket. My redundant systems don't seem to have been necessary, however. Quote Link to comment Share on other sites More sharing options...
Alymon Posted April 17, 2014 Share Posted April 17, 2014 Lots of things!I made a booster seat (ask me how it ended). (image)I brought a lander with lab to Minmus and gathered lots of science. (image)My Mun base is coming along. It now has a rover, a core module (which will eventually be replaced when I figure things out more) and the wreckage (sort of... it is still operational) of the rover lander.Javascript is disabled. View full album Quote Link to comment Share on other sites More sharing options...
pauix Posted April 17, 2014 Share Posted April 17, 2014 I tried to land a plane with some science in the K2 hills to and almost killed Jebediah in the process.<iframe class="imgur-album" width="100%" height="550" frameborder="0" src="http://imgur.com/a/DZ4SH/embed"></iframe> Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.