Jump to content

[1.2.2] Stock Part Revamp, Update 1.9.6. Released Source Files!


Ven

Recommended Posts

  On 6/8/2018 at 5:52 AM, Kardea said:

Not sure if anyone has experienced this bug recently, but I'm currently getting a bad one: in the editor, the "Open" button on the smaller of the two Service Bays is gone. There's a "toggle" button that does nothing, but no "Open" button, rendering the part useless as you can't place anything inside while it's closed. The 2.5m version of the bay works just fine. What's up?

Expand  

What version of Ven's Stock Revamp (and Kerbal Space Program) are you using?  I don't have that issue on the dev version (VSR "1.9.99" and KSP 1.4.3).

Link to comment
Share on other sites

  On 6/8/2018 at 4:42 PM, Kerbas_ad_astra said:

What version of Ven's Stock Revamp (and Kerbal Space Program) are you using?  I don't have that issue on the dev version (VSR "1.9.99" and KSP 1.4.3).

Expand  

I haven't seen any link to a 1.9.99 'dev' version of the mod... just the 1.9.5 link on the main page and the Github is showing 1.9.6 from a link a page or two back before this comment... Where can I find 1.9.99?

 

Edit: Who the heck gave me negative rep for posting this? lol I've got a "poor" rep now for asking about a github version? Yeesh.

Edited by Kardea
Link to comment
Share on other sites

  On 6/8/2018 at 8:19 PM, Kardea said:

I haven't seen any link to a 1.9.99 'dev' version of the mod... just the 1.9.5 link on the main page and the Github is showing 1.9.6 from a link a page or two back before this comment... Where can I find 1.9.99?

Expand  
 

The following page shows all of the forks of this mod: https://github.com/VenVen/Stock-Revamp/network

I assume that Kerbas_ad_astra's "KSP_1.4" branch is the active development version. But someone please correct me if I'm wrong.

Here's a direct link to the above-mentioned branch (because GitHub can be confusing to navigate if you aren't used to it):  https://github.com/Kerbas-ad-astra/Stock-Revamp/tree/KSP_1.4

Edited by d4harp
Link to comment
Share on other sites

  On 6/9/2018 at 5:38 PM, d4harp said:

The following page shows all of the forks of this mod: https://github.com/VenVen/Stock-Revamp/network

I assume that Kerbas_ad_astra's "KSP_1.4" branch is the active development version. But someone please correct me if I'm wrong.

Here's a direct link to the above-mentioned branch (because GitHub can be confusing to navigate if you aren't used to it):  https://github.com/Kerbas-ad-astra/Stock-Revamp/tree/KSP_1.4

Expand  

Yep, that's the one I'm using!

Link to comment
Share on other sites

  On 6/9/2018 at 4:15 PM, Tyko said:

@Kerbas_ad_astra - Love the way the 1.4 update is shaping up!!

Any chance you could please update the Mk5 Strip light so you can change the color of the light like you can on the Mk4 Point light?

Expand  

Unfortunately, that's actually not a "light" per se -- it's just an animation, there's no illumination to have a color.

Link to comment
Share on other sites

Anybody else having issues with the VSR large 2.5m hub (Extra-Large Rockomax HubMax Multi-Point Connector)? Had a 1.25m Clamp-O-Tron attached directly to one face of the hub, and a ship docked to it. When I went to undock the ship was pushed backwards (really more went flying away) from the hub at about 5 meters per second. Arr, there the Kraken blows!

After doing a little playing around with a Kerbal, it seems that at least in flight, the collider is behaving oddly. If I have a Kerbal on EVA fly into one of the facets of the cube, he bounces off about 1/3 of a meter (give or take) from the visible surface of the facet.

The VSR model for the stock 1.25m multi-point connector does not seem to exhibit this behavior.

Urrr?

Link to comment
Share on other sites

Hi @Kerbas_ad_astra, thanks for the work you've put into the VSR tidy up. Found a  minor suggestion to include in your changes. This doesn't have any game effect.

Part: structuralPanel3 has the variables node_stack_top, node_stack_bottom, node_attach defined twice in part CFG Definition. Also the node_attach has two different positions

Link to comment
Share on other sites

  On 6/9/2018 at 5:38 PM, d4harp said:

The following page shows all of the forks of this mod: https://github.com/VenVen/Stock-Revamp/network

I assume that Kerbas_ad_astra's "KSP_1.4" branch is the active development version. But someone please correct me if I'm wrong.

Here's a direct link to the above-mentioned branch (because GitHub can be confusing to navigate if you aren't used to it):  https://github.com/Kerbas-ad-astra/Stock-Revamp/tree/KSP_1.4

Expand  

You are the wind beneath my wings. That's exactly what I was looking for, thanks!
 

  On 6/8/2018 at 4:42 PM, Kerbas_ad_astra said:

What version of Ven's Stock Revamp (and Kerbal Space Program) are you using?  I don't have that issue on the dev version (VSR "1.9.99" and KSP 1.4.3).

Expand  

Sadly, updating to the Dev branch hasn't fixed the issue. The 0.625m Service Bay is still showing no "Open" button. Just the normal stuff (including a Kerbal OS-related button) plus a useless "toggle" button that doesn't do anything. Could this be an interaction from another mod? Screenshot here: https://drive.google.com/open?id=10Sxp_muif6LGnsgS4A41XYoDZsBbuLYd

Edited by Kardea
Link to comment
Share on other sites

I have 6 errors

KSP 1.4.3

  Reveal hidden contents

 

Link to comment
Share on other sites

  On 6/10/2018 at 7:48 AM, -MadMan- said:

I have 6 errors

KSP 1.4.3

  Reveal hidden contents

 

Expand  

That's probably coming from CryoTanks.  But it's odd, the patch should check for the presence of liquidFuel.  Would you mind posting your full KSP.log and ModuleManager.ConfigCache

Link to comment
Share on other sites

  On 6/10/2018 at 4:15 AM, Kardea said:

You are the wind beneath my wings. That's exactly what I was looking for, thanks!
 

Sadly, updating to the Dev branch hasn't fixed the issue. The 0.625m Service Bay is still showing no "Open" button. Just the normal stuff (including a Kerbal OS-related button) plus a useless "toggle" button that doesn't do anything. Could this be an interaction from another mod? Screenshot here: https://drive.google.com/open?id=10Sxp_muif6LGnsgS4A41XYoDZsBbuLYd

Expand  

That's not a part from Ven's Stock Revamp -- some other mod is cloning Squad's model, which is getting replaced by Ven's model, which uses a different animation name than Squad's, which makes the animation module stop working.  For my next trick, I'll guess that you're using KerBalloons.  (If you're not, please let me know what mod gives you the 0.625m service bay -- I'm working on a patch for KerBalloons, but if there's another mod I need to know so I can write a patch for it, too.)

Edited by Kerbas_ad_astra
Link to comment
Share on other sites

  On 6/11/2018 at 12:38 AM, Kerbas_ad_astra said:

That's not a part from Ven's Stock Revamp -- some other mod is cloning Squad's model, which is getting replaced by Ven's model, which uses a different animation name than Squad's, which makes the animation module stop working.  For my next trick, I'll guess that you're using KerBalloons.  (If you're not, please let me know what mod gives you the 0.625m service bay -- I'm working on a patch for KerBalloons, but if there's another mod I need to know so I can write a patch for it, too.)

Expand  

Neat trick! :) Yep, I do indeed have Kerballoons installed. I guess I'll look forward to the patch to handle that particular hiccup. Great mod, though! The only thing I wish it could offer would be the ability to toggle between the legacy and Ven-version for each part. Most of the revamp parts are awesome, but I prefer the old-school Mk16 parachute look with it's shorter cord.

Link to comment
Share on other sites

Hey @Kerbas_ad_astra, just downloaded your 1.4 branch to test things out on a clean install. Its definitely looking good!

I did notice a small issue that may not have come to your attention: the standard size clampotron docking port's new bumper animation seems bugged in both the VAB and in flight (extends but then retracts at end of animation)

All the other ports seem fine.

Edit: Weirdly enough, I was able to reproduce it once upon reloading the game but not since. Not sure what caused it. Will let you know with a log if it happens again.

Edited by Zorg
Link to comment
Share on other sites

  On 6/10/2018 at 6:13 PM, blowfish said:

That's probably coming from CryoTanks.  But it's odd, the patch should check for the presence of liquidFuel.  Would you mind posting your full KSP.log and ModuleManager.ConfigCache

Expand  

KSP Log

I dont have ModuleManager.ConfigCache. 

P.S. RoveMax model M1 doesn't work...it rotate, but vessel doesn't move...

Edited by -MadMan-
Link to comment
Share on other sites

  On 6/11/2018 at 8:45 AM, -MadMan- said:

KSP Log

I dont have ModuleManager.ConfigCache. 

P.S. RoveMax model M1 doesn't work...it rotate, but vessel doesn't move...

Expand  

Right, because errors would prevent it from generating.

It looks like the patch is in fact coming from Ven's - GameData/VenStockRevamp/Patches/SoftTanksLH2.cfg is badly broken.  I noticed that GameData/VenStockRevamp/Patches isn't included in the main download - is it even supported?

Link to comment
Share on other sites

  On 6/12/2018 at 2:05 AM, blowfish said:

Right, because errors would prevent it from generating.

It looks like the patch is in fact coming from Ven's - GameData/VenStockRevamp/Patches/SoftTanksLH2.cfg is badly broken.  I noticed that GameData/VenStockRevamp/Patches isn't included in the main download - is it even supported?

Expand  

Ouch...It was my mistake. I didn't delete old VSR. But RoveMax model M1 still doesn't work...

 

Can move

77AC7D6F85FD13332D93B7B7172E2D15D09EAD15

Can't move

 

15880A528167B044119275C7A9F03262442990B0

Stock wheels works fine

 

Edited by -MadMan-
Link to comment
Share on other sites

  On 6/12/2018 at 2:05 AM, blowfish said:

Right, because errors would prevent it from generating.

It looks like the patch is in fact coming from Ven's - GameData/VenStockRevamp/Patches/SoftTanksLH2.cfg is badly broken.  I noticed that GameData/VenStockRevamp/Patches isn't included in the main download - is it even supported?

Expand  

In the log provided, @-MadMan- was using a previous version of Ven's Stock Revamp (version 1.9.8, from the version file), and CryoTanks had changed since that version's "release" (it didn't really get a proper release).  The patch on my dev branch has been updated to work with the last release of CryoTanks.

  On 6/12/2018 at 7:32 AM, -MadMan- said:

Ouch...It was my mistake. I didn't delete old VSR. But RoveMax model M1 still doesn't work...

Stock wheels works fine

Expand  

Yes, I confirm that issue.  @EmbersArc, could you take a look at this?  The TR-2L wheels are also affected, but the S2 and XL3 are not.

Link to comment
Share on other sites

  On 6/12/2018 at 12:58 PM, Kerbas_ad_astra said:

Yes, I confirm that issue.  @EmbersArc, could you take a look at this?  The TR-2L wheels are also affected, but the S2 and XL3 are not.

Expand  

That was a collider issue. Here's the fix: https://www.dropbox.com/sh/qlo4rxgrxigrilv/AAB0H6CEqVjgaaVL6-iYfrJma?dl=0

Link to comment
Share on other sites

  On 6/13/2018 at 9:51 AM, EmbersArc said:
Expand  

Many thanks!  That TR-2L model works at 30 degrees positive camber, and the M1 works at 15 but not 30...I'm not sure if that's "not far enough" or fine as-is, but that's what I found in testing.

Speaking of colliders, could I also trouble you to look at this one?  I've just confirmed the issue in testing.  (The model in question is VenStockRevamp\Squad\Parts\Structural\LargeHub.mu.)

  On 6/10/2018 at 2:45 AM, akardam said:

Anybody else having issues with the VSR large 2.5m hub (Extra-Large Rockomax HubMax Multi-Point Connector)? Had a 1.25m Clamp-O-Tron attached directly to one face of the hub, and a ship docked to it. When I went to undock the ship was pushed backwards (really more went flying away) from the hub at about 5 meters per second. Arr, there the Kraken blows!

After doing a little playing around with a Kerbal, it seems that at least in flight, the collider is behaving oddly. If I have a Kerbal on EVA fly into one of the facets of the cube, he bounces off about 1/3 of a meter (give or take) from the visible surface of the facet.

The VSR model for the stock 1.25m multi-point connector does not seem to exhibit this behavior.

Urrr?

Expand  
Link to comment
Share on other sites

In the recent 1.4 build the Mystery Goo container is bigger than stock. the model is scaled to 1.2x according to the config. Was this intentional? I know that some previous versions of VSR the part had been scaled differently...

Link to comment
Share on other sites

  On 6/13/2018 at 8:12 PM, Tyko said:

In the recent 1.4 build the Mystery Goo container is bigger than stock. the model is scaled to 1.2x according to the config. Was this intentional? I know that some previous versions of VSR the part had been scaled differently...

Expand  

I can't speak for Ven, but I don't think it should be bigger than stock.  I'll take a look.

Link to comment
Share on other sites

  • 3 weeks later...
This thread is quite old. Please consider starting a new thread rather than reviving this one.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...