maja Posted July 8, 2021 Author Share Posted July 8, 2021 This mod is no longer needed in the KSP 1.12.x Quote Link to comment Share on other sites More sharing options...
Alexsys Posted July 9, 2021 Share Posted July 9, 2021 17 hours ago, maja said: This mod is no longer needed in the KSP 1.12.x Why? Crafts still slide and very helpfully use the parking brake mod to remain still. am i missing something new in 1.12 which i played for quite a while by now? Quote Link to comment Share on other sites More sharing options...
maja Posted July 12, 2021 Author Share Posted July 12, 2021 (edited) On 7/9/2021 at 2:21 PM, Alexsys said: Why? Crafts still slide and very helpfully use the parking brake mod to remain still. am i missing something new in 1.12 which i played for quite a while by now? I tested it and there wasn't any sliding. Can you upload somewhere a craft, which in your game? Edited July 12, 2021 by maja Quote Link to comment Share on other sites More sharing options...
beez1717 Posted July 21, 2021 Share Posted July 21, 2021 This mod may no longer be needed in 1.12.x but it's still useful to me because it stops the vessel from sometimes sliding at less than 0 m/s. It sometimes happens that the vehicle will slide extremely slowly but the parking break stops it when the default breaks don't work. It also is very useful for ships that don't have breaks. Quote Link to comment Share on other sites More sharing options...
maja Posted July 22, 2021 Author Share Posted July 22, 2021 13 hours ago, beez1717 said: This mod may no longer be needed in 1.12.x but it's still useful to me because it stops the vessel from sometimes sliding at less than 0 m/s. It sometimes happens that the vehicle will slide extremely slowly but the parking break stops it when the default breaks don't work. It also is very useful for ships that don't have breaks. I can do a rebuild for the latest KSP version if it is requiered Quote Link to comment Share on other sites More sharing options...
maja Posted July 23, 2021 Author Share Posted July 23, 2021 Updated for the KSP 1.12.x Quote Link to comment Share on other sites More sharing options...
rmaine Posted September 6, 2021 Share Posted September 6, 2021 Somewhat puzzled about automatic disengagement. I see a changelog entry about auto disengagement when a vehicle starts to fly. I suspect that is related, but I'm running into disengagement at inconvenient times where I certainly don't *INTEND* for the vehicle to be flying; indeed preventing that is part of why I'm using parking brake. I occasionally see the auto-disengagement on scene load. One time I jumped focus to my Gilly base only to see it leap into the air (a common problem on Gilly) while saying that the parking brake was disengaged. Fortunately, the base didn't leap too high or completely flip over; it managed to land intact and erect, at which time I reenabled the parking brake. Also on several occasions I've had rover parking brakes disable when the pilot left the external command seat. The auto-disengagement mostly isn't catastrophic, though it has the potential to be so; I've lost one re-supply ship to it, but the ship had delivered its supplies (and crew) and was just hanging around in case it might be useful for something else, so it wasn't a big loss. BTW, I definitely am using parking brake in 1.12.2. For one case, I occasionally find myself with a rover that is trying to mine an ore on a slopes a bit steeper than the regular brakes will hold on. If I can briefly get the craft velocity low enough to set the parking brake, I can then mine successfully. I don't need parking brake as often in 1.12.2, but it's still useful. In 1.11 it was downright critical to the extent that I found base building without it to be game-breakingly painful. Quote Link to comment Share on other sites More sharing options...
maja Posted July 15, 2022 Author Share Posted July 15, 2022 On 9/6/2021 at 10:00 PM, rmaine said: Somewhat puzzled about automatic disengagement. I see a changelog entry about auto disengagement when a vehicle starts to fly. I suspect that is related, but I'm running into disengagement at inconvenient times where I certainly don't *INTEND* for the vehicle to be flying; indeed preventing that is part of why I'm using parking brake. I occasionally see the auto-disengagement on scene load. One time I jumped focus to my Gilly base only to see it leap into the air (a common problem on Gilly) while saying that the parking brake was disengaged. Fortunately, the base didn't leap too high or completely flip over; it managed to land intact and erect, at which time I reenabled the parking brake. Also on several occasions I've had rover parking brakes disable when the pilot left the external command seat. The auto-disengagement mostly isn't catastrophic, though it has the potential to be so; I've lost one re-supply ship to it, but the ship had delivered its supplies (and crew) and was just hanging around in case it might be useful for something else, so it wasn't a big loss. BTW, I definitely am using parking brake in 1.12.2. For one case, I occasionally find myself with a rover that is trying to mine an ore on a slopes a bit steeper than the regular brakes will hold on. If I can briefly get the craft velocity low enough to set the parking brake, I can then mine successfully. I don't need parking brake as often in 1.12.2, but it's still useful. In 1.11 it was downright critical to the extent that I found base building without it to be game-breakingly painful. Sorry, I missed this. Disengaging is by design, because it caused problems when someone started flying with the break on, but it can be made optional. Quote Link to comment Share on other sites More sharing options...
KADC Posted December 30, 2022 Share Posted December 30, 2022 (edited) Is this supposed to activate automatically when brakes are applied or does it have to be manually selected from the command pod PAW? I thought it was the former because I've never had a problem stopping on a slope before when using this mod, but just now my landed craft kept drifting down a slope until I manually clicked it in the PAW which I never had to do before. Side note: As far as I can tell, it's the only action which is not assignable to an action group other than "Aim Camera Here" (which would be handy when you want to click on experiments but the KSP camera focus default is nowhere near your service bay). Is this intentional or an oversight? Edited December 30, 2022 by KADC Quote Link to comment Share on other sites More sharing options...
KADC Posted December 30, 2022 Share Posted December 30, 2022 Like rmaine's post a year ago, the parking brake disengaged when the scene loaded, presumably because some jostling registered as greater than the 0.3 m/s threshold this mod uses to register as stopped and landed. Would it be possible to keep the parking brake engaged on scene load to prevent this from happening, possibly tying it to the KSP brake function so when the brake ("B") is engaged Parking Brake is also engaged? Quote Link to comment Share on other sites More sharing options...
maja Posted January 4, 2023 Author Share Posted January 4, 2023 On 12/30/2022 at 9:12 AM, KADC said: Like rmaine's post a year ago, the parking brake disengaged when the scene loaded, presumably because some jostling registered as greater than the 0.3 m/s threshold this mod uses to register as stopped and landed. Would it be possible to keep the parking brake engaged on scene load to prevent this from happening, possibly tying it to the KSP brake function so when the brake ("B") is engaged Parking Brake is also engaged? That limit is 0.25 m/s. The parking brake is switched off when a vessel is flying. It can be that there is some jump during scene load and vessel has flying state for a short period of time. This was added, because people forget to dissengage the barke and started a flight. On 12/30/2022 at 2:27 AM, KADC said: Is this supposed to activate automatically when brakes are applied or does it have to be manually selected from the command pod PAW? I thought it was the former because I've never had a problem stopping on a slope before when using this mod, but just now my landed craft kept drifting down a slope until I manually clicked it in the PAW which I never had to do before. Side note: As far as I can tell, it's the only action which is not assignable to an action group other than "Aim Camera Here" (which would be handy when you want to click on experiments but the KSP camera focus default is nowhere near your service bay). Is this intentional or an oversight? It needs to be manually selected. It sets brakes on and brakes sets it off when they are released, but it's not set on by brakes. I think, that it wasn't assignable to action group from start. Quote Link to comment Share on other sites More sharing options...
KADC Posted January 4, 2023 Share Posted January 4, 2023 2 hours ago, maja said: That limit is 0.25 m/s. The parking brake is switched off when a vessel is flying. It can be that there is some jump during scene load and vessel has flying state for a short period of time. This was added, because people forget to dissengage the barke and started a flight. Yes, scene load caused my vessel to jump. Installing the WorldStabilizer mod stopped the scene load jumping which solved my problem. For anyone else experiencing scene-jump issues, though CKAN shows WorldStabilizer as only 1.8.99 compatible, I can confirm (as have others) that it works fine in 1.12.4. Quote Link to comment Share on other sites More sharing options...
kurgut Posted June 16, 2023 Share Posted June 16, 2023 (edited) On 8/14/2019 at 6:02 PM, Agustin said: How do I enable it for the external command seat? I can´t do a single science with 1.7 arm because it detects movement on my rover that only has external command seat. it should have it iirc... But anyway, you can try copying this in a cfg, place anywhere in /gamedata : @PART[seatExternalCmd]:HAS[!MODULE[ParkingBrakeModule]]:NEEDS[ParkingBrake]:FINAL { MODULE { name = ParkingBrakeModule } } @maja Hi, thank you for this mod : could you say in 2 words how this is different in behaviour from the ground tether from USI ? thank you Edited June 16, 2023 by kurgut Quote Link to comment Share on other sites More sharing options...
Ker Ball One Posted July 26 Share Posted July 26 I get the wobbles when launching a tall vessel (Saturn V) on a launch pad. It would be nice to have ParkingBrake auto enable at start of launch. Quote Link to comment Share on other sites More sharing options...
rmaine Posted July 26 Share Posted July 26 2 hours ago, Ker Ball One said: I get the wobbles when launching a tall vessel (Saturn V) on a launch pad. It would be nice to have ParkingBrake auto enable at start of launch. I'm confused as to why you think enabling parking brake would help this. I don't see what parking brake has to do with wobble at all. And having parking brake enabled when you try to take off doesn't solve problems; it causes them. See comments earlier in the thread about why the current version of parking brake automatically turns off when it thinks you are launching. I personally use an older version of parking brake because this auto-enable feature causes me no end of problems as mentioned above - certainly far more problems than the vague possibility that I might forget to turn off the brake when intentionally launching. There was mention of possibly making that feature a configurable option, but since that hasn't happened, I just go with using the old version (and then I have to be careful to turn down CKAN's suggestion that am update is available). Quote Link to comment Share on other sites More sharing options...
Ker Ball One Posted July 27 Share Posted July 27 2 hours ago, rmaine said: I don't see what parking brake has to do with wobble at all. I'm not talking about inter-part wobble (like a hotdog). I guess that's the more common use of the term wobble in KSP. Let me call it "swaying" instead of wobble. 2 hours ago, rmaine said: having parking brake enabled when you try to take off doesn't solve problems It does in this case. It solves it if I manually engage Parking Brake. The ground clamps at the bottom of the craft are not enough to stop this swaying. Sometimes it causes fairings to fall off. But if I immediately engage the Parking Brake when the scene loads on the pad, it stops the swaying. 2 hours ago, rmaine said: See comments earlier in the thread about why the current version of parking brake automatically turns off when it thinks you are launching That's a different problem. I don't have that issue. When I launch, it does auto disengage the Parking Brake, and I don't have any issues. Quote Link to comment Share on other sites More sharing options...
rmaine Posted July 27 Share Posted July 27 1 hour ago, Ker Ball One said: The ground clamps at the bottom of the craft are not enough to stop this swaying. Sometimes it causes fairings to fall off. But if I immediately engage the Parking Brake when the scene loads on the pad, it stops the swaying. Ah, then I misunderstood your "at start of launch" in addition to my misunderstanding your "wobble". Sounds like you are hoping for it to engage at scene load instead of at the launch. Quote Link to comment Share on other sites More sharing options...
maja Posted September 19 Author Share Posted September 19 If someone wants to adopt this or my other mods, contact me. I don't have time for modding anymore due to my bussy work and life schedule. Quote Link to comment Share on other sites More sharing options...
maja Posted October 14 Author Share Posted October 14 (edited) Management of this mod was transfered to @Lisias New thread is here: Edited October 14 by maja Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.