Jump to content

[1.12.*] MOAR [x] Science! - KSP Science report and checklist


linuxgurugamer

Recommended Posts

  • 2 weeks later...

Hi, I'm humbly wondering if there are any plans to make this compatible with Kerbalism science? The option to view unfinished science location-wise is very appealing, as opposed to the experiment-based view in Kerbalism itself.

Link to comment
Share on other sites

  • 8 months later...
  On 9/30/2023 at 3:43 AM, Max_Xu said:

if i use [x]science to collect experiments that require samples(e.g. Mystery Goo Observation, Materials Study),the experiment will become unavailable(scientists cannot reset it)and no science will be collected. when i run it again, it will show 'no more sample can be collected' .

Expand  

I see the same issue. The science window pops up and I can click store, but no samples are created and the experiment can't be reset by a scientist. [x] science and Ship Manifest show no science in the part.

Link to comment
Share on other sites

  • 8 months later...

Hey, I've got a problem that was mentioned here before, but this solution doesn't work for me or I'm not understanding something. 

  On 12/12/2022 at 1:28 PM, linuxgurugamer said:

There are some strange entries in your log file, before I say there's a problem, what language are you playing in?

You can try installing the KSP Toolbar, and then see if the buttons will show up on that toolbar.  Assumijng you do, you will have to do a few things to enable it there:

  • Enable it in the Toolbar Controller window
  • Enable it in the KSP Toolbar

Other than that and my first question, I don't see anything odd in your log file

Expand  

I also don't have toolbar icon and have all dependencies installed with CKAN. The setting in Toolbar Controller is set to both, but am I don't get the KSP Toolbar part. Is that blizzy's version or something different? 

https://imgur.com/a/N4zMxek - list of CKAN mods

https://www.dropbox.com/scl/fi/ccq42tqpgu4oej4bkjuhy/KSP.log?rlkey=t58qem8gb9m3bdk26ykopkayi&st=1q77o8oo&dl=0 - logs

Link to comment
Share on other sites

  On 2/17/2025 at 1:09 AM, skrkaxh said:

Hey, I've got a problem that was mentioned here before, but this solution doesn't work for me or I'm not understanding something. 

I also don't have toolbar icon and have all dependencies installed with CKAN. The setting in Toolbar Controller is set to both, but am I don't get the KSP Toolbar part. Is that blizzy's version or something different? 

https://imgur.com/a/N4zMxek - list of CKAN mods

https://www.dropbox.com/scl/fi/ccq42tqpgu4oej4bkjuhy/KSP.log?rlkey=t58qem8gb9m3bdk26ykopkayi&st=1q77o8oo&dl=0 - logs

Expand  

That doesn't seem to be the full KSP.log.  I'd prefer the Player.log, for me it's better

Link to comment
Share on other sites

  On 2/17/2025 at 4:14 PM, linuxgurugamer said:

That doesn't seem to be the full KSP.log.  I'd prefer the Player.log, for me it's better

Expand  

Sure thing. Didn't know which one is more useful so I included both Player and Player-prev logs. 

https://www.dropbox.com/scl/fi/jeyw2ov5xf3c3wgl7pgub/Player.log?rlkey=iwjfvrs3g119bntdcnh5hx0xa&st=cy62v9mo&dl=0 - Player.log

https://www.dropbox.com/scl/fi/1mkryizinsfolujjsdmrw/Player-prev.log?rlkey=8fbwb9wg09cbmjzt8kpuyyuf7&st=743pih9f&dl=0 - Player-prev.logs

Link to comment
Share on other sites

  On 2/17/2025 at 4:40 PM, skrkaxh said:
Expand  

Thanks.   There is an odd error in the log file I've never seen before which is causing your problem.

How did you install all the mods?

Link to comment
Share on other sites

  On 2/21/2025 at 10:49 PM, skrkaxh said:

Initially I had all mods installed manually. But when i got troubles with Xscience i switched CKAN

Expand  

It is beginning to sound like you have some badly installed mods.   You can run the following commands (windows cmd prompt) to get a pull list and then send me the file:

Run the following command:

dir /s >files.txt

This will create a file called "files.txt" in the GameData directory.  
Send this file to me, or upload to a filesharing site and send me a link.

You can even make it available on the forum for others to look at in case I don't get to it quickly

This will help us figure out what might have been installed incorrectly

LGG

Link to comment
Share on other sites

  On 2/22/2025 at 3:07 AM, Brigadier said:

Did you begin with a clean install when you switched to CKAN?

Expand  

Yes, I cleared all mods from GameData before installing CKAN.

  On 2/23/2025 at 2:37 PM, linuxgurugamer said:

It is beginning to sound like you have some badly installed mods.   You can run the following commands (windows cmd prompt) to get a pull list and then send me the file:

Run the following command:

dir /s >files.txt

This will create a file called "files.txt" in the GameData directory.  
Send this file to me, or upload to a filesharing site and send me a link.

You can even make it available on the forum for others to look at in case I don't get to it quickly

This will help us figure out what might have been installed incorrectly

LGG

Expand  

I tried to manually spot the collision between mods, but everything had seemed to work with eachother.

https://www.dropbox.com/scl/fi/h29s9fnodouojdckosdas/files.txt?rlkey=r15zubkx7bkyte03ib1ajbk63&st=w00zy76y&dl=0

Link to comment
Share on other sites

  On 2/23/2025 at 7:04 PM, skrkaxh said:

Yes, I cleared all mods from GameData before installing CKAN.

I tried to manually spot the collision between mods, but everything had seemed to work with eachother.

https://www.dropbox.com/scl/fi/h29s9fnodouojdckosdas/files.txt?rlkey=r15zubkx7bkyte03ib1ajbk63&st=w00zy76y&dl=0

Expand  

Good news is that I don't see any directories out of place.

Can you please upload the ModuleManager.configcache file?

Also, if it's all in CKAN, please export a ckan file and upload that as well?

Link to comment
Share on other sites

  On 2/23/2025 at 9:42 PM, linuxgurugamer said:

Good news is that I don't see any directories out of place.

Can you please upload the ModuleManager.configcache file?

Also, if it's all in CKAN, please export a ckan file and upload that as well?

Expand  

The last thing I didn't try is to reinstall KSP and CKAN altogether. 

https://www.dropbox.com/scl/fi/65tkg9x322y41wavsy8nq/zainstalowane-Kerbal-Space-Program.ckan?rlkey=yu6ou1d6xdzdpe2d1q7hnnxc3&st=m576dcx8&dl=0

https://www.dropbox.com/scl/fi/sk4ktkb9yiqxz5q5o4mrj/ModuleManager.ConfigCache?rlkey=01cxxt8rpjdd1qt8mfm907g0w&st=tjnxliy4&dl=0

Link to comment
Share on other sites

  • 3 weeks later...
  On 9/30/2023 at 3:43 AM, Max_Xu said:

if i use [x]science to collect experiments that require samples(e.g. Mystery Goo Observation, Materials Study),the experiment will become unavailable(scientists cannot reset it)and no science will be collected. when i run it again, it will show 'no more sample can be collected' .

Expand  

Definitely an issue that's been around a while. You learn to just not trigger certain experiments using [X] Science so you can re-use/recover those specific experiments.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...