Andy81le Posted April 4, 2016 Share Posted April 4, 2016 (edited) In 1.1, backspace to exit a HullCam view does not appear to work. Removed Backspace from the default KSP config, still not able to exit Hullcam VDS view. In addition, after reaching about 6000 m height, with a downward camera, the view starts to repeatedly zoom in to KSC VAB. Edited April 4, 2016 by Andy81le Link to comment Share on other sites More sharing options...
yorshee Posted April 4, 2016 Share Posted April 4, 2016 2 hours ago, V8jester said: Did you have any quantum struts or active struts on this craft? They will act all buggy like that if you attach them to a physics less part. Also was this in 1.0.5 or was this 1.1? I don't have 1.1 yet so I won't be much help there. This was in 1.1, and I didn't have any struts attached to any physicsless parts. Link to comment Share on other sites More sharing options...
Bob Jub Posted April 6, 2016 Share Posted April 6, 2016 the version for 1.1 is a bit buggy right now as stated by other users. Not really usable. But I'm sure everything will get sorted eventually. Link to comment Share on other sites More sharing options...
nosirrbro Posted April 8, 2016 Share Posted April 8, 2016 On 4/6/2016 at 2:46 AM, Bob Jub said: the version for 1.1 is a bit buggy right now as stated by other users. Not really usable. But I'm sure everything will get sorted eventually. Not at all usable, once you switch to a camera, THERES NO GOING BACK! (mostly, sometimes if you jiggle it right under the 2:04pm moonlight with a pint of sheeps blood it goes back to normal view) Link to comment Share on other sites More sharing options...
davidy12 Posted April 8, 2016 Share Posted April 8, 2016 Doesn't work, bugs out often (6000m Camera issue). Link to comment Share on other sites More sharing options...
Spire Posted April 16, 2016 Share Posted April 16, 2016 Kind of a stupid question, but is the 0.52 version for 1.1.0.1209? Link to comment Share on other sites More sharing options...
davidy12 Posted April 18, 2016 Share Posted April 18, 2016 On April 16, 2016 at 3:43 PM, HawkedUpSpace said: Kind of a stupid question, but is the 0.52 version for 1.1.0.1209? No, it doesn't @Albert VDS is still working on it. Link to comment Share on other sites More sharing options...
boborene Posted April 18, 2016 Share Posted April 18, 2016 TypeLoadException: Could not load type 'Vector3d' from assembly 'Assembly-CSharp, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null'. -> CTD and backspace key not working. Link to comment Share on other sites More sharing options...
atomontage Posted April 20, 2016 Share Posted April 20, 2016 Hello. Let me thank you for this great mod. But the current build breaks the game if I use a part with an integrated camera. This time it is MRS Guidance Unit (from the Modular Rocket Systems mod). At ~5400m it krakenifies constantly. Looking forward for the fix! Thanks! Link to comment Share on other sites More sharing options...
Arglebargle Posted April 20, 2016 Share Posted April 20, 2016 Also getting extreme camera wonk on ships with integrated cameras, including docking ports. Uninstalling the mod breaks loading of some missions and seems to cause other things in the save to break. Link to comment Share on other sites More sharing options...
N'Matale Nwakanzagolo Posted April 20, 2016 Share Posted April 20, 2016 I just signed up to say thank you so much for this mod it is absolutely brilliant and very much looking forward to the 1.1 update. Same issues as others have stated, also when trying to view with RPM it says no signal. Getting same error as boborene but no CTD. Zoom is also not functioning. Thanks again! Link to comment Share on other sites More sharing options...
Daelkyr Posted April 22, 2016 Share Posted April 22, 2016 I've been using this mod for some time to take in flight screenshots using F1. But suddenly, F1 is only grabbing the regular screenshot without applying the filters from the mod. Any idea why? Using 5.2 with KSP 1.0.5. Link to comment Share on other sites More sharing options...
gamerscircle Posted April 22, 2016 Share Posted April 22, 2016 I installed the mod, didn't put any cameras on a craft and the middle size 'stock' docking ports were gone after a burn.. Then I removed the mod and the docking ports were back. I don't know if that help or not. Link to comment Share on other sites More sharing options...
OndrikB Posted April 23, 2016 Share Posted April 23, 2016 (edited) The EVA view does not work There is no "activate camera" button Edited April 23, 2016 by OndrikB Link to comment Share on other sites More sharing options...
V8jester Posted April 23, 2016 Share Posted April 23, 2016 3 hours ago, OndrikB said: The EVA view does not work There is no "activate camera" button The "Test version" was for the pre release of 1.1 Not the full release. There are some issues and Albert is working on them. Just be patient. Link to comment Share on other sites More sharing options...
MrKibe Posted April 23, 2016 Share Posted April 23, 2016 On 18/04/2016 at 10:23 AM, boborene said: TypeLoadException: Could not load type 'Vector3d' from assembly 'Assembly-CSharp, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null'. -> CTD and backspace key not working. I'm having the same problem, the debug console just says that over and over and over and over, a few hundred times every 5 seconds... I can't quit to the space center, revert flight, or do anything, I click and it does nothing but show that they have been clicked. I tried removing the mod but it didn't help either... Link to comment Share on other sites More sharing options...
Noro113 Posted April 24, 2016 Share Posted April 24, 2016 Just letting everyone know i ran into a bug where docking ports dont collide and wont dock. im 100% sure it was this mod hopefully it gets fixed Link to comment Share on other sites More sharing options...
plague006 Posted April 25, 2016 Share Posted April 25, 2016 The link to the sourcecode in the OP needs a fix, it's currently `http://www./download/85411817881jbzz/HullcamVDS0.50-src.zip` Link to comment Share on other sites More sharing options...
lextacy Posted April 25, 2016 Share Posted April 25, 2016 also getting the same issues, no camera toggles or gui . If a craft has cameras on it ,the game would kraken-lock the center of mass and then trigger a krakenbake. Hoping for a 1.1 release. I think latest version is for the experimentals? Link to comment Share on other sites More sharing options...
eddyjay Posted April 25, 2016 Share Posted April 25, 2016 On 24/04/2016 at 7:19 AM, Noro113 said: Just letting everyone know i ran into a bug where docking ports dont collide and wont dock. im 100% sure it was this mod hopefully it gets fixed Also getting this problem here. Done some tracking to see which mod was causing this, and came to the same conclusion. Docking ports just pass right through each other. Bummer, this was the last mod before I could continue with my 1.0.5 save, and removing this mod will delete ALL my ships! I'll be checking in for updates! Link to comment Share on other sites More sharing options...
HoveringKiller Posted April 26, 2016 Share Posted April 26, 2016 Not sure if It's hullcam or not, but I'm getting a bug where the docking ports seem to want to fly away, like they got stuck in space. I never had any issues before installing hullcam before, so I'm going to uninstall and re-test. Link to comment Share on other sites More sharing options...
davidy12 Posted April 26, 2016 Share Posted April 26, 2016 Just now, HoveringKiller said: Not sure if It's hullcam or not, but I'm getting a bug where the docking ports seem to want to fly away, like they got stuck in space. I never had any issues before installing hullcam before, so I'm going to uninstall and re-test. The mod is BROKEN. Link to comment Share on other sites More sharing options...
Sobotkama Posted April 26, 2016 Share Posted April 26, 2016 In addition to all the bugs reported here... When i build a vessel that has a docking port in the middle (redoing apollo again) and press decouple node, the ports stay together, ship stys one vessel and starts spinning around. Link to comment Share on other sites More sharing options...
HoveringKiller Posted April 26, 2016 Share Posted April 26, 2016 11 minutes ago, davidy12 said: The mod is BROKEN. I didn't realize that... I just uninstalled and I'm not getting errors, still thanks though! Link to comment Share on other sites More sharing options...
JohnWildman Posted April 28, 2016 Share Posted April 28, 2016 On 26.4.2016 at 9:53 PM, Sobotkama said: In addition to all the bugs reported here... When i build a vessel that has a docking port in the middle (redoing apollo again) and press decouple node, the ports stay together, ship stys one vessel and starts spinning around. I can confirm this issue. Took me 3 hours to find the mod that caused the problem... It has taken this long because I have 185 mods installed! Love the mod, so I hope you can fix this! Link to comment Share on other sites More sharing options...
Recommended Posts