Jump to content

[1.12.3+] RealChute Parachute Systems v1.4.9.5 | 20/10/24

stupid_chris

By stupid_chris
in KSP1 Mod Releases

 Share

Recommended Posts

Mihara

Mihara

Posted
Posted

Was it this one?



PartLoader: Compiling Part 'RealChute/Legacy Parts/drogue_main_combo_chute/RC_combo_large'

(Filename: C:/BuildAgent/work/d63dfc6385190b60/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 49)

ArgumentOutOfRangeException: Argument is out of range.

Parameter name: index
  at System.Collections.Generic.List`1[RealChute.Parachute].get_Item (Int32 index) [0x00000] in <filename unknown>:0 

  at RealChute.RealChuteModule.GetInfo () [0x00000] in <filename unknown>:0 

  at PartLoader.ParsePart (.UrlConfig urlConfig, .ConfigNode node) [0x00000] in <filename unknown>:0 

  at PartLoader+.MoveNext () [0x00000] in <filename unknown>:0

Dies when loading. That's the 64 bit build, clean install.

Link to comment
Share on other sites
Rakird

Rakird

Posted
Posted (edited)

Any possibility to leave the 0.23.5 version link or someone give me a link to that version? I'm playing RO + RSS + RPL and the 0.23.5 version worked well, now it just ruins the RPL tech tree, makes all parts disappear (all not only the chutes), and i didn't backed up the 23.5 version :S

Ty

Edited by Rakird
Link to comment
Share on other sites
Holyvision

Holyvision

Posted
Posted

When playing using the update .24 release of RealChute:

I find that using the stock Mk16 parachute (not the RealChute parts) does not show the chute visibly at all on initial deployment, though the speed does slow. Upon reaching the full-deployment altitude (500m @ Kerbin) the full chute never deploys and fails to slow the craft enough to prevent destruction. I have verified the chute settings were not out of whack... correct weight, altitude of deployment, and etc settings. When right-clicking on the part in flight, it shows two "deploy" icons, almost as though it is seeing a RealChute item and the stock item at the same time? I deleted the "legacy parts" folder per instruction as it was causing a loading-hang on initial game launch.

I have a couple other .24 mods installed currently; if no one else can reproduce I can pull back other mods and see if I have a conflict somewhere.

Thanks again for getting this pulled into .24 so fast! DRM wouldn't be the same without it!

Link to comment
Share on other sites
Oinker

Oinker

Posted
Posted (edited)

Uhh.. no thanks to the settings icon. If you don't want it on the VAB Action Group settings page, then a better place is Blizzy's Toolbar (so we can set it visible once, change settings, and remove it). But while you've got the toolbar wrapper goin', change the settings from the action group page to a show/hide calculator type entry where you open the calc and you click on the chute to configure.

Edited by Oinker
Link to comment
Share on other sites
Starwaster

Starwaster

Posted
Posted
When playing using the update .24 release of RealChute:

I find that using the stock Mk16 parachute (not the RealChute parts) does not show the chute visibly at all on initial deployment, though the speed does slow. Upon reaching the full-deployment altitude (500m @ Kerbin) the full chute never deploys and fails to slow the craft enough to prevent destruction. I have verified the chute settings were not out of whack... correct weight, altitude of deployment, and etc settings. When right-clicking on the part in flight, it shows two "deploy" icons, almost as though it is seeing a RealChute item and the stock item at the same time? I deleted the "legacy parts" folder per instruction as it was causing a loading-hang on initial game launch.

I have a couple other .24 mods installed currently; if no one else can reproduce I can pull back other mods and see if I have a conflict somewhere.

Thanks again for getting this pulled into .24 so fast! DRM wouldn't be the same without it!

Use the debug menu in the game to see what modules are installed on the chute part.

And yeah, that stock chute bug is a killer. I was going to hold off downloading RC 1.2 until Stupid Chris was done with whatever update he was going to do after work tonight but I just lost Jeb and Bill both trying to do some stupid contract missions and their lives were depending on their chutes not malfunctioning. The thing is, sometimes they work fine and others.... failure at 500 meters. W T H SQUAD.

You know what? I'm turning dead crew respawn back on. I'm willing to let them go if it was my mistake but not for Squad bugs :huh::mad:

Link to comment
Share on other sites
Gobur

Gobur

Posted
Posted (edited)

I have another bug, in flight chute vanishing from staging list and lose options to open manualy. This hapen only with stock parts, after load quicksave

Edited by Gobur
Link to comment
Share on other sites
kanelives

kanelives

Posted
Posted (edited)

I don't understand how to change th sizes and other parameters of the chutes, also I can't add them to action groups. I don't see a menu for changing size and whatnot and if I right click the chutes it just tells me what there settings are. Also I don't see the drag chutes that were green. Did I install wrong? I can't tweak them from the action group window either.

Edit: actually it only doesn't work in sandbox mode but it does in career.

But also I can never get these chutes to deploy. I assign them to groups and they never go when I press the button and they don't stage either. Not sure what I'm doing wrong.

Edited by kanelives
Link to comment
Share on other sites
vardicd

vardicd

Posted
Posted
Any possibility to leave the 0.23.5 version link or someone give me a link to that version? I'm playing RO + RSS + RPL and the 0.23.5 version worked well, now it just ruins the RPL tech tree, makes all parts disappear (all not only the chutes), and i didn't backed up the 23.5 version :S

Ty

check your inbox sent you a PM.

Link to comment
Share on other sites
Holyvision

Holyvision

Posted
Posted
Bug report:

whenever i load the new new real chutes update, it would freeze in the loading widow on parts that used the real chutes module

Read back a couple pages -- you need to delete the "Legacy Parts" folder that's within the RealChute folder -- it wasn't meant to be in there and was included on accident. Deleting it will fix all your problems =D

Link to comment
Share on other sites
Ruedii

Ruedii

Posted
Posted

For temporary compatibility with DebRefund, I will be simply removing the modulemanager files to make the stock chutes realchute-based. That way I can use the stock chutes, compatible with DebRefund on my discard stages and use RealChutes on my main module.

I thought I'd tell everyone the genius little hack while I was at it so they could use the two mods together. I'll also mention this on the DebRefund thread.

Link to comment
Share on other sites
Desrtfox

Desrtfox

Posted
Posted
Read back a couple pages -- you need to delete the "Legacy Parts" folder that's within the RealChute folder -- it wasn't meant to be in there and was included on accident. Deleting it will fix all your problems =D

I have the same issue. Load fails at parachuteDrogue. I'm using 1.2, and I have no legacy parts folder. I'm running the x64 version, and this loads without realChute. I do have a fair number of other mods running.

Link to comment
Share on other sites
Starwaster

Starwaster

Posted
Posted
I have the same issue. Load fails at parachuteDrogue. I'm using 1.2, and I have no legacy parts folder. I'm running the x64 version, and this loads without realChute. I do have a fair number of other mods running.

That sounds like you still have a copy of the old .23.5 version stuck in there somewhere...

Link to comment
Share on other sites
stupid_chris

stupid_chris

Posted
  • Author
Posted (edited)
Any possibility to leave the 0.23.5 version link or someone give me a link to that version? I'm playing RO + RSS + RPL and the 0.23.5 version worked well, now it just ruins the RPL tech tree, makes all parts disappear (all not only the chutes), and i didn't backed up the 23.5 version :S

Ty

v1.1 is not going to work with KSP 0.24. CompatibilityChecker is going to kill the mod.

When playing using the update .24 release of RealChute:

I find that using the stock Mk16 parachute (not the RealChute parts) does not show the chute visibly at all on initial deployment, though the speed does slow. Upon reaching the full-deployment altitude (500m @ Kerbin) the full chute never deploys and fails to slow the craft enough to prevent destruction. I have verified the chute settings were not out of whack... correct weight, altitude of deployment, and etc settings. When right-clicking on the part in flight, it shows two "deploy" icons, almost as though it is seeing a RealChute item and the stock item at the same time? I deleted the "legacy parts" folder per instruction as it was causing a loading-hang on initial game launch.

I have a couple other .24 mods installed currently; if no one else can reproduce I can pull back other mods and see if I have a conflict somewhere.

Thanks again for getting this pulled into .24 so fast! DRM wouldn't be the same without it!

I need more info. Logs screenshots, everything you can get me. A description is not getting me anywhere.

Uhh.. no thanks to the settings icon. If you don't want it on the VAB Action Group settings page, then a better place is Blizzy's Toolbar (so we can set it visible once, change settings, and remove it). But while you've got the toolbar wrapper goin', change the settings from the action group page to a show/hide calculator type entry where you open the calc and you click on the chute to configure.

Well you're going to have to deal with it. Toolbar integration definitely isn't happening.

I have another bug, in flight chute vanishing from staging list and lose options to open manualy. This hapen only with stock parts, after load quicksave

See up a little, I need info, not a description.

I don't understand how to change th sizes and other parameters of the chutes, also I can't add them to action groups. I don't see a menu for changing size and whatnot and if I right click the chutes it just tells me what there settings are. Also I don't see the drag chutes that were green. Did I install wrong? I can't tweak them from the action group window either.

Edit: actually it only doesn't work in sandbox mode but it does in career.

But also I can never get these chutes to deploy. I assign them to groups and they never go when I press the button and they don't stage either. Not sure what I'm doing wrong.

Loooooogs. More info. I feel like I'm repeating myself.

two questions:

1. Does 1.2 work with 0.23.5.x?

2. If no, where can I get an older version of this mod?

1) I've got no clue.

2) guess that's fixed.

I have the same issue. Load fails at parachuteDrogue. I'm using 1.2, and I have no legacy parts folder. I'm running the x64 version, and this loads without realChute. I do have a fair number of other mods running.

You are using outdated MM files.

Guys, if anything fails to load, you are using outdated parts. It's as simple as that. And if you have bugs, I need some info. Seriously I'm hoping the "it hangs in loading" thing is not going to turn into "I'm missing some parts".

Also guys, update not happening tonight, sorry to dissapoint, I hope you all can understand.

Edited by stupid_chris
Link to comment
Share on other sites
NathanKell

NathanKell

Posted
Posted
Uhh.. no thanks to the settings icon. If you don't want it on the VAB Action Group settings page, then a better place is Blizzy's Toolbar (so we can set it visible once, change settings, and remove it). But while you've got the toolbar wrapper goin', change the settings from the action group page to a show/hide calculator type entry where you open the calc and you click on the chute to configure.

How about a pony? Would you like one of those too?

Link to comment
Share on other sites
OwDoge

OwDoge

Posted
Posted

Just a heads up, having trouble loading HomeGrownRocketParts' Inline Parachute when RealChute is installed, it just stops at the part in the loading screen but it doesn't freeze or crash.

Also guys, update not happening tonight, sorry to dissapoint, I hope you all can understand.

Dude, chill. This is a mod, you don't owe anyone here anything. Its not like you work for SQUAD, take your time.

Link to comment
Share on other sites
stupid_chris

stupid_chris

Posted
  • Author
Posted
Just a heads up, having trouble loading HomeGrownRocketParts' Inline Parachute when RealChute is installed, it just stops at the part in the loading screen but it doesn't freeze or crash.

Look at the four previous pages for the fix.

And eh, I guess I'm just tired.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing
×
×
  • Create New...