UnanimousCoward Posted January 7, 2015 Share Posted January 7, 2015 ATM can take a lot of time if you are using too many mods or too big files. Which is why b9 or astronomers mods while are pretty, are worthless in practice.However, if you have a good computer, you can start the process let the atm take over,alt tab, play your mini games, surf arround the internet for 30 minutes. When you try to check the ksp window, it will "look" as if it is frozen in the last file just before you minimized the game, but in reality the loading continues. i played 30 minutes and then came back, and closed KSP (sometimse you have to force it shut down with ctrl alt delete) restarted ksp, waited in loading window for 30 seconds, and started the game and voila!Or you can just let it run... I left it until it was finished. My Game Data folder is over 3 Gb, and it took a looong time, like an hour or so, but eventually it finished what it was doing. It does seem to take longer with OpenGL for some reason, but I can't even get to the main menu on DirectX. Link to comment Share on other sites More sharing options...
TheReaper Posted January 7, 2015 Share Posted January 7, 2015 Or you can just let it run... I left it until it was finished. My Game Data folder is over 3 Gb, and it took a looong time, like an hour or so, but eventually it finished what it was doing. It does seem to take longer with OpenGL for some reason, but I can't even get to the main menu on DirectX.Yes you can just let it run.. but when you have nothing else to do but sitting on the computer and you have an hour to wait.. why the hell not multitask Link to comment Share on other sites More sharing options...
UnanimousCoward Posted January 7, 2015 Share Posted January 7, 2015 Yes you can just let it run.. but when you have nothing else to do but sitting on the computer and you have an hour to wait.. why the hell not multitaskTrue dat. I tend to spend my time lurking around the forums looking for even more amazing mods to strain KSP to the absolute limit. Link to comment Share on other sites More sharing options...
TheReaper Posted January 7, 2015 Share Posted January 7, 2015 True dat. I tend to spend my time lurking around the forums looking for even more amazing mods to strain KSP to the absolute limit.i hope in future patches. .91 or 90.1 whatever they will focus on fixing the games problems rather then adding content, even stock ksp is very close to 32x limits now. This game could use a programming update. and no, i dont take "blame unity" as an excuse. Link to comment Share on other sites More sharing options...
SaintWacko Posted January 8, 2015 Share Posted January 8, 2015 What causes these strange double clouds? The effect is really jarring. I see there's one other mention of it in the thread, but I'm not quite sure what happened with that. Link to comment Share on other sites More sharing options...
Thesonicgalaxy Posted January 8, 2015 Author Share Posted January 8, 2015 What causes these strange double clouds? The effect is really jarring. I see there's one other mention of it in the thread, but I'm not quite sure what happened with that.http://i.imgur.com/NdTZ7FV.pngLike the install manual says,1. I have what looks like 2 sets of the same clouds on kerbin!? What’s going on?If you’re getting this, you NEED TO REMOVE THE ORIGINAL CLOUDLAYERS.CFG IN THE CLOUDS FOLDER UNDER THE BOULDERCO FOLDER! Link to comment Share on other sites More sharing options...
TheReaper Posted January 8, 2015 Share Posted January 8, 2015 What causes these strange double clouds? The effect is really jarring. I see there's one other mention of it in the thread, but I'm not quite sure what happened with that.Long ago i had this issue myself, i didn't have cloudlayers.cfg in cloud folder in boulder Co. If you encounter the same problem Press alt+n to bring EVE menu and tweak with values until you find the correct one, you can also edit everything to your liking. If you need more help page 67 of this thread can have usefull information. Link to comment Share on other sites More sharing options...
Benf207 Posted January 12, 2015 Share Posted January 12, 2015 I installed everything, and it seems to work, but when I open a ship in the VAB the game crashes. Does anyone know why this happens? Link to comment Share on other sites More sharing options...
temporalExile Posted January 14, 2015 Share Posted January 14, 2015 I installed everything, and it seems to work, but when I open a ship in the VAB the game crashes. Does anyone know why this happens?Looks like you hit the RAM usage limit. KSP 32-bit will crash if it uses more than 3.7 GB of ram. You can use Active Texture Management to lower your RAM usage. Link to comment Share on other sites More sharing options...
SmashBrown Posted January 14, 2015 Share Posted January 14, 2015 Pretty stuff!!!! I'll grab this to use at some point when the RAM usage is upped. Link to comment Share on other sites More sharing options...
TheRamzinator Posted January 19, 2015 Share Posted January 19, 2015 I did some editing, for personal use ofcourse, and found out that a texture is missing. It's the "joolLayers2" file... just a heads up Link to comment Share on other sites More sharing options...
JulienJaden Posted January 24, 2015 Share Posted January 24, 2015 Okay, I've been banging my head against the wall for over an hour now trying to fix this but I'm out of ideas, so here I am.I've downloaded the high resolution pack from DropBox, put it all in the GameData folder, downloaded the sharedassets file, replaced the original with the 32bit one (and changed the name accordingly), got the "Real Solar System is not the correct version message"... and when the game was launched, nothing was different. Old skybox, old galaxy, old planet textures, no clouds.So I thought it was RSS being deactivated and everything else depending on it, download RSS, played around with it (replacing the DLL, then another time copy-and-pasting everything from the BA version into the RSS version [which, surprisingly enough, then isn't identified as an outdated file anymore?]), checking the game for changes after every change - with no result. I even re-replaced sharedassets9 with the original file to see if that fixed it but, again, no.Is any file missing from the high resolution pack that I'm not aware of? Is there some bug nobody else is experiencing (or at least not talking about)? Is RSS screwing it all up?And, just in case I did something wrong, could somebody give me a step-by-step installation guide for the mod, in case I somehow made a mistake putting it all into GameData? Link to comment Share on other sites More sharing options...
Thesonicgalaxy Posted January 24, 2015 Author Share Posted January 24, 2015 Okay, I've been banging my head against the wall for over an hour now trying to fix this but I'm out of ideas, so here I am.I've downloaded the high resolution pack from DropBox, put it all in the GameData folder, downloaded the sharedassets file, replaced the original with the 32bit one (and changed the name accordingly), got the "Real Solar System is not the correct version message"... and when the game was launched, nothing was different. Old skybox, old galaxy, old planet textures, no clouds.So I thought it was RSS being deactivated and everything else depending on it, download RSS, played around with it (replacing the DLL, then another time copy-and-pasting everything from the BA version into the RSS version [which, surprisingly enough, then isn't identified as an outdated file anymore?]), checking the game for changes after every change - with no result. I even re-replaced sharedassets9 with the original file to see if that fixed it but, again, no.Is any file missing from the high resolution pack that I'm not aware of? Is there some bug nobody else is experiencing (or at least not talking about)? Is RSS screwing it all up?And, just in case I did something wrong, could somebody give me a step-by-step installation guide for the mod, in case I somehow made a mistake putting it all into GameData?You got all the 'required' mods, right? Link to comment Share on other sites More sharing options...
JulienJaden Posted January 25, 2015 Share Posted January 25, 2015 You got all the 'required' mods, right?Well, I mean, technically... no....^^"...Thanks. Link to comment Share on other sites More sharing options...
CoolVikingCo Posted February 1, 2015 Share Posted February 1, 2015 Either I'm stupid, or one of the required mods are outdated. Link to comment Share on other sites More sharing options...
Panzerbeard Posted February 5, 2015 Share Posted February 5, 2015 Either I'm stupid, or one of the required mods are outdated. If you mean EVE, for some reason it hasn't been touched since september, I don't know what's been going on with it but it does apparently work fine in 0.90. I used it through 0.25 for a while and it seemed okay, I did get one or two problems but that may have been a problem with too many mods anyway. Link to comment Share on other sites More sharing options...
Nitrous Oxide Posted February 5, 2015 Share Posted February 5, 2015 EVE works "fine" in 0.90, but I've noticed some terrible FPS drops since 0.90 that I've concluded are due to EVE. Surprisingly, the dev overhaul of EVE works a lot better, but the config format has changed so BA doesn't work until someone ports it over properly. I may do that myself if I can figure out how to convert it all successfully. Link to comment Share on other sites More sharing options...
Panzerbeard Posted February 5, 2015 Share Posted February 5, 2015 EVE works "fine" in 0.90, but I've noticed some terrible FPS drops since 0.90 that I've concluded are due to EVE. Surprisingly, the dev overhaul of EVE works a lot better, but the config format has changed so BA doesn't work until someone ports it over properly. I may do that myself if I can figure out how to convert it all successfully.Good to know, thanks. I'll probably just keep waiting until it's properly updated or there's an alternative, personally. Link to comment Share on other sites More sharing options...
SmashingKirby148 Posted February 6, 2015 Share Posted February 6, 2015 I'm having a problem. I can only download Low res. The other downloads cut out around half way, and give me only the BoulderCo, and sometimes the texture manager with it. Winrar also gives me an error. I don't want low res. Link to comment Share on other sites More sharing options...
JID00Gaming Posted February 8, 2015 Share Posted February 8, 2015 I have a bug... When I view a planet from orbit, or from tracking centre... it looks fine, but when im landed on the planet... there is always clouds above... no matter what... its really bothersome on duna... because there is nonstop sand storms... somebody please help Link to comment Share on other sites More sharing options...
EasyAce Posted February 9, 2015 Share Posted February 9, 2015 People keep telling me: "Just follow the download instructions"... but that don't work or I am missing something completly.it says the following on the first page:"Looks great! What do I need to use this?The full package comprises four standalone parts:EVE for the clouds and atmosphere effects:http://forum.kerbalspaceprogram.com/...etricClouds%21Texture Replacer for the Skybox and Kerbin texture:http://forum.kerbalspaceprogram.com/...elmets-RemovalCustom Asteroids for Joolian asteroid rings.http://forum.kerbalspaceprogram.com/...steroids-1-0-0KittopiaTech Ingame terraforming tools for the Joolian ring system.http://forum.kerbalspaceprogram.com/...ng-Tools-V0-18I also highly recommend Distant Object Enhacement.http://forum.kerbalspaceprogram.com/...ent-bis-v1-4-0Alright, installed that stuff. Now where can I download this pack?There are a few places to download this pack.DROPBOX LINKS"My question is - the links first mentioned all are included in the dropbox links.Am I still supposed to install them separately at first, then install the dropbox links?? Link to comment Share on other sites More sharing options...
Svm420 Posted February 10, 2015 Share Posted February 10, 2015 I should use the most recent dll from RSS right not the one that comes with this? I cant figure out what i am doing wrong... Link to comment Share on other sites More sharing options...
Sheppard Posted February 10, 2015 Share Posted February 10, 2015 First of all you have to install all the listed mods separately. They are NOT included in the dropbox link. What's included there are kind of config files for the mentioned mods you need. Once you have installed all the mods listed (EVE, Texture Replacer, Custom Asteroids, Kittopia, Distant Object etc.) from their original pages, you must download the dropbox archive and merge those folders with the Game Data folders created by the original mods. After that, all should be working fine.Again, you need to install first the original mods required for this to function. Link to comment Share on other sites More sharing options...
Nitrous Oxide Posted February 10, 2015 Share Posted February 10, 2015 (edited) First of all you have to install all the listed mods separately. They are NOT included in the dropbox link. What's included there are kind of config files for the mentioned mods you need. Once you have installed all the mods listed (EVE, Texture Replacer, Custom Asteroids, Kittopia, Distant Object etc.) from their original pages, you must download the dropbox archive and merge those folders with the Game Data folders created by the original mods. After that, all should be working fine.Again, you need to install first the original mods required for this to function.Also worth noting, you can install only the mods you want... EVE does the clouds and atmospheric effects, Texture Replacer handles the new skybox, Custom Asteroids add asteroids to Jool, Kittopia adds rings to Jool, and DOE is recommended but not required. So it's possible for example to use only the new skybox & sun flare and not the clouds, rings or asteroids in case you are low on RAM. Also, yeah. It's probably a good idea to use the latest RSS dll. That's what I was doing. Edited February 10, 2015 by Nitrous Oxide Link to comment Share on other sites More sharing options...
EasyAce Posted February 10, 2015 Share Posted February 10, 2015 First of all you have to install all the listed mods separately. They are NOT included in the dropbox link. What's included there are kind of config files for the mentioned mods you need. Once you have installed all the mods listed (EVE, Texture Replacer, Custom Asteroids, Kittopia, Distant Object etc.) from their original pages, you must download the dropbox archive and merge those folders with the Game Data folders created by the original mods. After that, all should be working fine.Again, you need to install first the original mods required for this to function.Thanks, that clarify everything. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now