Beale Posted November 11, 2018 Author Share Posted November 11, 2018 (edited) 21 hours ago, TK-313 said: Well, there's always the option of leaving the RCS blocks to run on monoprop and the MOE ones to use LF/O. Plus, it will add some difference between them other than cosmetic. Plus, if we were to follow that road to the end, the service modules would change a bit: T-75K would carry (and use) both LF/O and monoprop instead of monoprop only, while T-85K would only have LF/O for both its engine and RCS. I think options will always be the best route in these cases - given a lot of the parts have limited reaction wheels and usually need something. It could be like so: Radiators! GitHub First version available for preview, a lot is still missing or not configured correct - but the old FGB ships will be unaffected (Except for a new... paint job). Edited November 11, 2018 by Beale Quote Link to comment Share on other sites More sharing options...
TK-313 Posted November 11, 2018 Share Posted November 11, 2018 (edited) 35 minutes ago, Beale said: It could be like so: No love for the MOEs? Well, you know, the rectangular ones with twin top nozzles? Edited November 11, 2018 by TK-313 Quote Link to comment Share on other sites More sharing options...
Beale Posted November 11, 2018 Author Share Posted November 11, 2018 (edited) 6 minutes ago, TK-313 said: No love for the MOEs? Well, you know, the rectangular ones with twin top nozzles? But of course Not sure on the colours, they could use some work. Edited November 11, 2018 by Beale Quote Link to comment Share on other sites More sharing options...
TK-313 Posted November 11, 2018 Share Posted November 11, 2018 2 minutes ago, Beale said: Not sure on the colours, they could use some work. Agreed... White just doest't feel right. I'd rather vote for something darker, maybe darker than the original nozzles. Quote Link to comment Share on other sites More sharing options...
Beale Posted November 11, 2018 Author Share Posted November 11, 2018 11 minutes ago, TK-313 said: Agreed... White just doest't feel right. I'd rather vote for something darker, maybe darker than the original nozzles. That actually looks pretty nice, if taking the whole body darker. Quote Link to comment Share on other sites More sharing options...
golkaidakhaana Posted November 12, 2018 Share Posted November 12, 2018 2 hours ago, Beale said: That actually looks pretty nice, if taking the whole body darker. It looks better than with white nozzles, though I don't think it'd look very good on the crafts themselves. Quote Link to comment Share on other sites More sharing options...
overkill13 Posted November 12, 2018 Share Posted November 12, 2018 Not sure how it would work as a historical design, but have you considered a red/rust or bronze coloured nozzle set along with the standard grey. Or maybe differentiate by adding a grey line around the base area, where the taper starts. Excuse my terrible MS Paint skills but something akin to this: Spoiler Quote Link to comment Share on other sites More sharing options...
golkaidakhaana Posted November 12, 2018 Share Posted November 12, 2018 1 minute ago, overkill13 said: Not sure how it would work as a historical design, but have you considered a red/rust or bronze coloured nozzle set along with the standard grey. Tantares Now in Colours includes many different colours for most of Tantares' parts, including a rust/dark orange. Quote Link to comment Share on other sites More sharing options...
overkill13 Posted November 12, 2018 Share Posted November 12, 2018 1 minute ago, sslaptnhablhat said: Tantares Now in Colours includes many different colours for most of Tantares' parts, including a rust/dark orange. Yes, though I don't use it. I'm not looking for different coloured Soyuzs. I mean to differentiate between LFO and Monoprop thruster variants for easier identification on the parts listings in the VAB. Change the nozzles to be rust/bronze, perhaps for whichever variant is older historically. Though an older model wouldn't be rusted at the time of it's development/deloyment. Bronze does come across as vintage though. Quote Link to comment Share on other sites More sharing options...
CardBoardBoxProcessor Posted November 12, 2018 Share Posted November 12, 2018 Beale Does your stuff have Normal maps? Quote Link to comment Share on other sites More sharing options...
Beale Posted November 12, 2018 Author Share Posted November 12, 2018 (edited) 19 hours ago, overkill13 said: Not sure how it would work as a historical design, but have you considered a red/rust or bronze coloured nozzle set along with the standard grey. Or maybe differentiate by adding a grey line around the base area, where the taper starts. Excuse my terrible MS Paint skills but something akin to this: That's a pretty nice ide, the only issue I can picture is that the parts should be identifiable in the VAB - which is a little tricky in this case when scaled small. 3 hours ago, CardBoardBoxProcessor said: Beale Does your stuff have Normal maps? Yes, every part where relevant has a normal and specular map. Edited November 12, 2018 by Beale Quote Link to comment Share on other sites More sharing options...
CardBoardBoxProcessor Posted November 12, 2018 Share Posted November 12, 2018 Cool Im gonna start using it Quote Link to comment Share on other sites More sharing options...
overkill13 Posted November 13, 2018 Share Posted November 13, 2018 (edited) 3 hours ago, Beale said: That's a pretty nice ide, the only issue I can picture is that the parts should be identifiable in the VAB - which is a little tricky in this case when scaled small. The parts are a bit bigger than that, on my screen at least. Here's the example differentiation from RLA Stockalike that gave me the idea, cut and pasted from a screenshot of the game. Can't say what they look like on a bigger screen, but my laptop makes them identifiable. Edited November 13, 2018 by overkill13 Quote Link to comment Share on other sites More sharing options...
golkaidakhaana Posted November 13, 2018 Share Posted November 13, 2018 @Beale Could we get an alternative plain grey paint job for the Mir and Zarya nodes? Quote Link to comment Share on other sites More sharing options...
simonplundgren Posted November 13, 2018 Share Posted November 13, 2018 On 4/4/2018 at 3:27 AM, Drakenex said: Beale had it, then abandoned it, but is easy to restore: Let me know if you want more info! I would love to have a file with this! This is my favourite capsule from the glourious tantares style. Please link if anyone has it. Quote Link to comment Share on other sites More sharing options...
DJ Reonic Posted November 13, 2018 Share Posted November 13, 2018 10 minutes ago, simonplundgren said: I would love to have a file with this! This is my favourite capsule from the glourious tantares style. Please link if anyone has it. I would like this capsule as well. I may have it already, as a matter of fact. I can check my old downloads and try to link it if I have it. Quote Link to comment Share on other sites More sharing options...
simonplundgren Posted November 13, 2018 Share Posted November 13, 2018 12 minutes ago, DJ Reonic said: 24 minutes ago, simonplundgren said: I would love to have a file with this! This is my favourite capsule from the glourious tantares style. Please link if anyone has it. I would like this capsule as well. I may have it already, as a matter of fact. I can check my old downloads and try to link it if I have it. That would be awesome! Thank you either way Quote Link to comment Share on other sites More sharing options...
Beale Posted November 13, 2018 Author Share Posted November 13, 2018 (edited) 14 hours ago, sslaptnhablhat said: @Beale Could we get an alternative plain grey paint job for the Mir and Zarya nodes? I'm open to it, the colour schemes are entirely open to suggestion until the parts are finished: Also surface greebles are needed, they are still mostly plain cylinders. 32 minutes ago, DJ Reonic said: I would like this capsule as well. I may have it already, as a matter of fact. I can check my old downloads and try to link it if I have it. 18 minutes ago, simonplundgren said: That would be awesome! Thank you either way It's really flattering! sorry I don't have the capsule (Drakenex may). By the way, @Nertea recently interpreted this capsule (In the same size), and did a much better job, if you are interested. We follow widely the same art style so it probably would not look too out of place. Near Future Spacecraft Edited November 13, 2018 by Beale Quote Link to comment Share on other sites More sharing options...
simonplundgren Posted November 13, 2018 Share Posted November 13, 2018 1 minute ago, Beale said: It's really flattering! sorry I don't have the capsule (Drakenex may). By the way, @Nertea recently interpreted this capsule (In the same size), and did a much better job, if you are interested. We follow widely the same art style so it probably would not look too out of place. Near Future Spacecraft It's deserved! I downloaded this one this morning, But your style is more inline with my sort of building. and this capsule is a bit to big for some reason. and the bottom part is a bit to clunky for my taste. Its a very good model, beautiful in every way. But ....its not tantares Quote Link to comment Share on other sites More sharing options...
Beale Posted November 13, 2018 Author Share Posted November 13, 2018 3 minutes ago, simonplundgren said: It's deserved! I downloaded this one this morning, But your style is more inline with my sort of building. and this capsule is a bit to big for some reason. and the bottom part is a bit to clunky for my taste. Its a very good model, beautiful in every way. But ....its not tantares Ah fair enough I had a search of the oldest versions I have and unfortunately v32.0 is the oldest (Older versions were on Kerbal stuff, which unfortunately...). Hopefully @Drakenex can bring his magic. Quote Link to comment Share on other sites More sharing options...
simonplundgren Posted November 13, 2018 Share Posted November 13, 2018 1 minute ago, Beale said: Ah fair enough I had a search of the oldest versions I have and unfortunately v32.0 is the oldest (Older versions were on Kerbal stuff, which unfortunately...). Hopefully @Drakenex can bring his magic. Thank you for taking the time anyway in case it is lost to time: I really hope you can find some time for it in the future. Really enjoy you stuff Quote Link to comment Share on other sites More sharing options...
Drakenex Posted November 14, 2018 Share Posted November 14, 2018 6 hours ago, simonplundgren said: I would love to have a file with this! This is my favourite capsule from the glourious tantares style. Please link if anyone has it. Federation help yourself Quote Link to comment Share on other sites More sharing options...
simonplundgren Posted November 14, 2018 Share Posted November 14, 2018 8 hours ago, Drakenex said: Federation help yourself Thank you so much. Cant get it to work though. where goes what? Quote Link to comment Share on other sites More sharing options...
simonplundgren Posted November 14, 2018 Share Posted November 14, 2018 Never mind. just made it work. I overcomplicated everything. Thanks for all the help guys. Quote Link to comment Share on other sites More sharing options...
BRAAAP_STUTUTU Posted November 15, 2018 Share Posted November 15, 2018 I can't seem to fin the A-VK3 vostok avionics part anywhere on the techtree (using CTT) where should it be? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.