Jump to content

[1.3.0] OPT Space Plane v2.0.1 - updated 29/07/2017

K.Yeon

By K.Yeon
in KSP1 Mod Releases

 Share

Recommended Posts

captinjoehenry

captinjoehenry

Posted
Posted
  On 10/26/2017 at 4:26 AM, JadeOfMaar said:

Heh. :D All OPT's engines are gorgeous, but I must tell you they will not return to the main pack. The "other" Mk2 engines on the Duna plane are the new HAE-02 which directly replaces the J-61 (from which I made the S.A.G.E.)

Alongside the HAE-02, K. Yeon proposed an alternate model which was also short but had twin nozzles like the J-60 and S.U.R.G.E. and which may have directly replaced the J-60.

Expand  

Ah yes I do recall that being brought up back when those engines were introduced.  Still though it would be nice to get some high performance engines in the main pack like the ones in the legacy pack.

Link to comment
Share on other sites
EthanKerbman

EthanKerbman

Posted
Posted (edited)

TL;DR : In OPT Legacy, k_oms is somehow bugged and interferes game-wide with, apparently, water physics (don't ask me how and why), commenting out ModuleAnimateGeneric and ModuleCargoBay on it is the only cure I've found yet.

Let me tell you a little tale :

Once upon a time, a brave soul wanted to design a seaplane, but no matter what he did, clever geometry, cunning aerodynamics, overwhelming thrust, no design would reach a speed allowing it to leave Kerbin bright blue waters. The curious little designer then turned to his wise ancestors for guidance and took a look at how Squad's seaplanes were designed and was surprised to find out that they suffered from the exact same problem, he then embarked on a journey to find which of his 350+ installed mods broke seaplanes.

Very long story short, after a few dozen hours (testing each mod individually, testing interactions, testing individual files), I've pinpointed it to two culprits on my install, one being OPT Legacy's k_oms part (the solid one), specifically the ModuleAnimateGeneric and ModuleCargoBay Modules. I first thought it was only due to the referred to nodes being commented out, but that didn't fix the problem, I had to comment out both modules to fix the problem. How that fixes a game-wide problem affecting planes not using this part, I have no clue (yet), but I've now tested it dozens of time, with the same result. With these two modules active on k_oms, Squad's Gull's maximum speed in water is around 22m/s, not enough for take-off, without them, it's about 42m/s, with take-off possible starting from 30m/s.

For the curious, the other culprit was SM Marine's HeliDeckDecal, limiting the Gull to 26m/s, seemed somehow linked to ModuleAnimateGeneric too, but I'd had enough of testing done for the month so since I didn't use the part, I just deactivated it.

Edited by EthanKerbman
Link to comment
Share on other sites
JadeOfMaar

JadeOfMaar

Posted
Posted
  On 11/4/2017 at 3:04 PM, kerbalfreak said:

I really love this mod, have made a really cool SSTO with it. Only wish that the windows were blue, to fit better with stock parts. I have seem screenshots out there with blue windows, is a replacer or old version?

Thanks!

Expand  

I'm not aware of this. It could have been the work of Windowshine or that stock parts had the same colors as OPT's windows back then (I know those changed).

  On 11/4/2017 at 10:10 PM, RogueWraith909 said:

Quick question, is there a cockpit for the H fuselage?  I can only find a drone core in that particular size on the CKan pack version. 

Expand  

There is no H cockpit. Due to the underlying vision for the H class parts, none is to be expected. :/ 

Link to comment
Share on other sites
gilflo

gilflo

Posted
Posted

Hey

As an OPT fan I discovered new OPT engines as the Warpjet engines.

Can someone explain how to use them? Do I need only tons of electricity and whatever atmosphere to use them ? Do I need initial speed?

Some wiki about those engines would be helpful

An OPT wiki could also be great

Link to comment
Share on other sites
KSPNoob

KSPNoob

Posted
Posted

So I think the OPT Legacy messed up my game.  I love all the parts especially the engines however it seemed like all of a sudden my existing SSTOs had some serious new issues hitting speeds to leave orbit, especially the ones with the normal OPT parts that I never had issues with.  No matter what I tried it seemed like getting past the 400 m/s mark was difficult.  So I removed the Legacy folder and everything went back to normal.  Could the mod have messed with my game that much or am I imagining it all together?
 

For example my small SSTO with two OPT Turbo-ramjets and  two B9 Sabre S engines couldn't even break 400 m/s with the legacy pack installed yet have no issue after I removed it. TbAtmCu.jpg

 

Link to comment
Share on other sites
stali79

stali79

Posted
Posted
  On 11/2/2017 at 9:37 AM, EthanKerbman said:

TL;DR : In OPT Legacy, k_oms is somehow bugged and interferes game-wide with, apparently, water physics (don't ask me how and why), commenting out ModuleAnimateGeneric and ModuleCargoBay on it is the only cure I've found yet.

Let me tell you a little tale :

Once upon a time, a brave soul wanted to design a seaplane, but no matter what he did, clever geometry, cunning aerodynamics, overwhelming thrust, no design would reach a speed allowing it to leave Kerbin bright blue waters. The curious little designer then turned to his wise ancestors for guidance and took a look at how Squad's seaplanes were designed and was surprised to find out that they suffered from the exact same problem, he then embarked on a journey to find which of his 350+ installed mods broke seaplanes.

Very long story short, after a few dozen hours (testing each mod individually, testing interactions, testing individual files), I've pinpointed it to two culprits on my install, one being OPT Legacy's k_oms part (the solid one), specifically the ModuleAnimateGeneric and ModuleCargoBay Modules. I first thought it was only due to the referred to nodes being commented out, but that didn't fix the problem, I had to comment out both modules to fix the problem. How that fixes a game-wide problem affecting planes not using this part, I have no clue (yet), but I've now tested it dozens of time, with the same result. With these two modules active on k_oms, Squad's Gull's maximum speed in water is around 22m/s, not enough for take-off, without them, it's about 42m/s, with take-off possible starting from 30m/s.

For the curious, the other culprit was SM Marine's HeliDeckDecal, limiting the Gull to 26m/s, seemed somehow linked to ModuleAnimateGeneric too, but I'd had enough of testing done for the month so since I didn't use the part, I just deactivated it.

Expand  

 

  On 11/6/2017 at 11:45 PM, KSPNoob said:

So I think the OPT Legacy messed up my game.  I love all the parts especially the engines however it seemed like all of a sudden my existing SSTOs had some serious new issues hitting speeds to leave orbit, especially the ones with the normal OPT parts that I never had issues with.  No matter what I tried it seemed like getting past the 400 m/s mark was difficult.  So I removed the Legacy folder and everything went back to normal.  Could the mod have messed with my game that much or am I imagining it all together?
 

For example my small SSTO with two OPT Turbo-ramjets and  two B9 Sabre S engines couldn't even break 400 m/s with the legacy pack installed yet have no issue after I removed it. TbAtmCu.jpg

 

Expand  

Try the quick fix that @EthanKerbman mentions in this quoted post and let me know if that solves the issue.

Link to comment
Share on other sites
JadeOfMaar

JadeOfMaar

Posted
Posted (edited)
  On 11/7/2017 at 1:18 AM, KSPNoob said:

Thanks but not sure how to comment out something to fix it.

Expand  

Open the part config and just delete ModuleAnimateGeneric, ModuleCargoBay, and their respective curly brackets { } and everything inside them, and let us know how it works out.

  On 11/6/2017 at 11:26 PM, gilflo said:

Hey

As an OPT fan I discovered new OPT engines as the Warpjet engines.

Can someone explain how to use them? Do I need only tons of electricity and whatever atmosphere to use them ? Do I need initial speed?

Some wiki about those engines would be helpful

An OPT wiki could also be great

Expand  

The WarpJet engines are mine. Yes, they only need atmosphere and lots of electricity. They turn the air itself into plasma and shoot it out like any ion engine but with the power of a liquid engine, and are meant for use in upscaled systems and on any planet that has atmosphere but no Oxygen.

Only atmosphere pressure matters to them, not initial speed, so you can climb sharply to get to ideal altitudes, then cruise at the altitudes where they work best and you may no longer need your other air-breathing engines. They can accelerate infinitely (far, far beyond Mach 6) provided they still get enough IntakeAtm and don't explode from overheating themselves. Near Future reactors and Heat Control radiators are recommended for powering them.

  • The S.U.R.G.E. engine is a heavy lifter, awkward to place, but enables spaceplanes to carry less fuel mass and return from sea level on Eve and even harder planets with atmosphere. It pushes harder in thicker atmosphere and near the edge of space, and will need increasing amounts of EC at those extremes. It works where no other jet engine can work.
    Furthermore, with its size it holds lots of IntakeAtm. Close its intake during ascent just before the point where the IntakeAtm would bleed out and you can use it in vacuum for free dV as a pure but super inefficient ion drive.
  • The S.A.G.E. engine is a booster and upper stage sort, with the same nature as the S.U.R.G.E. but is more like a true scramjet engine. It's all you need for aircraft to get off the ground on Duna, but doesn't have the volume to produce much thrust at Kerbin or Laythe sea level. It even flames out in Eve's lower atmosphere. This engine works in vacuum like the S.U.R.G.E. and is slightly more efficient but needs the big engine's tankage.

Since you're only now noticing these, you may want to cast your eyes on the ARI-73 engine. If you don't already know, it now replaces nuclear jet and nuclear rocket engines.

Edited by JadeOfMaar
Link to comment
Share on other sites
The-Doctor

The-Doctor

Posted
Posted (edited)

The MockingJay

The MockingJay is the first multipurpose, amphibious, SSTO VTOL. Built by the greatest engineers in history, able to get you to and from orbit . Warranty void if atmospheric entry is too steep or autolanding is attempted. Available on KerbalX

https://kerbalx.com/The-Doctor/MockingJay

9UlRmjX.png

CeJH81i.png

 

Edited by The-Doctor
Link to comment
Share on other sites
The-Doctor

The-Doctor

Posted
Posted

Here are the rest of the craft

https://kerbalx.com/The-Doctor/MockingJay-FAR

https://kerbalx.com/The-Doctor/MockingJay-B-FAR

https://kerbalx.com/The-Doctor/MockingJay-C

https://kerbalx.com/The-Doctor/MockingJay-C-FAR

https://kerbalx.com/The-Doctor/MockingJay-D

https://kerbalx.com/The-Doctor/MockingJay-D-FAR

https://kerbalx.com/The-Doctor/MockingJay-E

https://kerbalx.com/The-Doctor/MockingJay-E-FAR

Link to comment
Share on other sites
memeconnoiseur

memeconnoiseur

Posted
Posted

For some reason KSP stops loading when it tries to load the SAGE engine in the OPT legacy file.

It doesn't crash the game it just stops loading.

I'm running KSP 1.3.0 and using OPT legacy 1.0.8a and have had the same problem with OPT legacy 1.0.9

If anyone has a fix for this I would appreciate it

Link to comment
Share on other sites
JadeOfMaar

JadeOfMaar

Posted
Posted
  On 11/10/2017 at 5:15 AM, memeconnoiseur said:

For some reason KSP stops loading when it tries to load the SAGE engine in the OPT legacy file.

It doesn't crash the game it just stops loading.

I'm running KSP 1.3.0 and using OPT legacy 1.0.8a and have had the same problem with OPT legacy 1.0.9

If anyone has a fix for this I would appreciate it

Expand  

The SAGE and SURGE engines use a non-stock resource. Install Community Resource Pack.

Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing
×
×
  • Create New...