Jump to content

[WIP][1.8.x] SSTULabs - Low Part Count Solutions (Orbiters, Landers, Lifters) - Dev Thread [11-18-18]


Recommended Posts

12 minutes ago, Jimbodiah said:

Sorry to be a no-show... Playing Subnautica and ARK lately like it's an addiction. I need a stable 1.5.x SSTU before I will play again I think, not messing with 1.4 :)))   My 1.3.1 still works fine.

No worries; you aren't missing much.  SSTU for KSP 1.4.x has been in kind of a half-finished state for awhile now; hoping to get it more cleaned up for 1.5.


On that note -- major progress has been made on the update for 1.5 this week.  I think I have probably 2/3 of the parts updated for the new TU shaders, with the remainders being parts that will require a bit more attention beyond simple conversions.  Probably won't have it done by this weekend, but perhaps next might be doable.

Link to post
Share on other sites

Cool, I have just DLed the new KSP updates. I tried the last SSTU I had installed, and it worked nicely on the new machine. Still migrating stuff, but so far, so good.

Link to post
Share on other sites
9 minutes ago, buguniao said:

I have difficulties on installing the SSTU, for the KSP will be stuck at the loading screen where it says"loading up resources"....is there any solutions? i've only installed the SSTU pack mod and its PBR also

You need to install CommunityResourcePack, KSPWheel, and all other dependencies that come with the SSTU install.  If you have all of those, and it still isn't working, please upload a copy of your KSP.log file to somewhere online (dropbox/etc) and post a link here so that I might take a look.

Most likely cause is a missing dependency or incorrect installation; either one should be simple enough to diagnose and fix if the log file is provided.

Link to post
Share on other sites
4 minutes ago, Shadowmage said:

You need to install CommunityResourcePack, KSPWheel, and all other dependencies that come with the SSTU install.  If you have all of those, and it still isn't working, please upload a copy of your KSP.log file to somewhere online (dropbox/etc) and post a link here so that I might take a look.

Most likely cause is a missing dependency or incorrect installation; either one should be simple enough to diagnose and fix if the log file is provided.

https://drive.google.com/open?id=1B0Y7JpG2A7SaWcCymwVb0U0Oehb2L-uT

here is the link of the KSP.log

thanks for helping!!!:P

Link to post
Share on other sites
31 minutes ago, buguniao said:

https://drive.google.com/open?id=1B0Y7JpG2A7SaWcCymwVb0U0Oehb2L-uT

here is the link of the KSP.log

thanks for helping!!!:P

 

Looks like there is an error in your CRP installation, likely a duplicate resource or another similar error.  If you installed the one bundled with SSTU, I would recommend trying to download the most recent CRP  (the bundled one -should- work, not sure why you are getting the error below).

[LOG 23:08:41.262] Resource ColonySupplies added to database
[EXC 23:08:41.265] ArgumentOutOfRangeException: startIndex + length > this.length
Parameter name: length
	System.String.Substring (Int32 startIndex, Int32 length)
	PartResourceDefinition.GetShortName (Int32 length)
	PartResourceDefinition.Load (.ConfigNode node)
	PartResourceDefinitionList.Add (.ConfigNode node)
	PartResourceLibrary.LoadDefinitions ()
	GameDatabase+<CreateDatabase>c__Iterator0.MoveNext ()
	UnityEngine.SetupCoroutine.InvokeMoveNext (IEnumerator enumerator, IntPtr returnValueAddress)
[LOG 23:08:41.265] CodeAssetLoader: Compiling all code assets

 

To be clear, that error looks to be entirely CRP / resource related, and not directly caused by SSTU.

Link to post
Share on other sites
20 minutes ago, Shadowmage said:

 

Looks like there is an error in your CRP installation, likely a duplicate resource or another similar error.  If you installed the one bundled with SSTU, I would recommend trying to download the most recent CRP  (the bundled one -should- work, not sure why you are getting the error below).

[LOG 23:08:41.262] Resource ColonySupplies added to database
[EXC 23:08:41.265] ArgumentOutOfRangeException: startIndex + length > this.length
Parameter name: length
	System.String.Substring (Int32 startIndex, Int32 length)
	PartResourceDefinition.GetShortName (Int32 length)
	PartResourceDefinition.Load (.ConfigNode node)
	PartResourceDefinitionList.Add (.ConfigNode node)
	PartResourceLibrary.LoadDefinitions ()
	GameDatabase+<CreateDatabase>c__Iterator0.MoveNext ()
	UnityEngine.SetupCoroutine.InvokeMoveNext (IEnumerator enumerator, IntPtr returnValueAddress)
[LOG 23:08:41.265] CodeAssetLoader: Compiling all code assets

 

To be clear, that error looks to be entirely CRP / resource related, and not directly caused by SSTU.

thanks! my KSP starts successfully after I change the CRP file, but there is another problem: my texture unlimited and PBR failed to work.... ;.;

Link to post
Share on other sites
2 minutes ago, buguniao said:

thanks! my KSP starts successfully after I change the CRP file, but there is another problem: my texture unlimited and PBR failed to work.... ;.;

Please upload a new log file from your recent runs -- there may be other issues preventing TU/SSTU from working.

Link to post
Share on other sites
1 minute ago, buguniao said:

It looks like everything loaded fine.  What is the issue you are running into?

Try using one of the SSTU fuel tanks in the VAB.  Should be named something like SSTU-MFT-A.  Spawn one of those parts, right click on it, and press the 'Open Recoloring GUI' button.  If there is no button, please show a screenshot of the part-action menu open while in the editor.

Link to post
Share on other sites
9 hours ago, Shadowmage said:

It looks like everything loaded fine.  What is the issue you are running into?

Try using one of the SSTU fuel tanks in the VAB.  Should be named something like SSTU-MFT-A.  Spawn one of those parts, right click on it, and press the 'Open Recoloring GUI' button.  If there is no button, please show a screenshot of the part-action menu open while in the editor.

thanks~! I've finally run this thing on my computer!:)

Link to post
Share on other sites

A continuation of my problem regarding USI supplies/mulch showing up on Lander, CM's, SM's and station parts:

Lander parts seemed to be affected by a name change. I just had to put in the correct part name in the patch to get it to show up (but still doesn't show up in part menu)...

Everything else I am at a loss for as it is way over my head.  

Your patches for Lander vs CM/SM vs Station parts handle things differently. Lander parts and station part patches use volume container, one works one doesn't. The Command modules and service modules use just "Resource". 

I don't want to mess around with it for fear of breaking stuff, so currently I am just adding the supplies via their respective parts in USI for CM's etc. 

Link to post
Share on other sites

Every time I plan a comeback to KSP, this is always the very first mod I check to make sure it's compatible to the version of KSP I'm planning to use.

Looking forward to the 1.5.1 update, SM! You're my favorite mod maker and you're always top class in the way you talk on these forums! :)

Link to post
Share on other sites
35 minutes ago, serg1983 said:

Hello !!!why not all items support RO

You should ask that in the RO thread. Because there are no RO configs for all the parts of sstu. You can easily make them yourself, take a look at the Ro folder-> suggested mods->sstu for examples.

Link to post
Share on other sites
46 minutes ago, JohnMcLane said:

Вы должны спросить об этом в потоке RO . Поскольку нет RO конфиги для всех частей СГТУ. Вы можете легко сделать их самостоятельно, взгляните на папку Ro -> предлагаемые моды -> sstu для примеров.

it's complicated . I have no idea how to remake it all under RO

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...