Vorg Posted August 26, 2015 Share Posted August 26, 2015 After putting a grid on a kerbal head texture, I found the white area on the male heads does not seem to be used for the teeth. I don't know what the white area is. The female texture doesn't even have it. Teeth must be another texture some place. Quote Link to comment Share on other sites More sharing options...
shaw Posted August 26, 2015 Author Share Posted August 26, 2015 i mostly duplicated configs from parts that worked and then referenced the part name in it E.G. }@PART[bigtruk]{ %MODULE[TRReflection] { %name = TRReflection %shader = Reflective/Bumped Diffuse %colour = 0.5 0.5 0.5 %interval = 2 %meshes = }and this doesnt seem to have any effect, is it possible that bcause the model spins in a wheel that it wont reflect? (i hope not) but i have tried everything regarding the textures and the configs and it just hasnt worked... driving me nutz!- - - Updated - - -on that note, i managed to get the stock wheels to reflect, is there a max polly count for a reflection to work? most of mine are massive poly counts and is there any way to increase this max polly count/split the mesh into beits bellow the max polly count?Sorry, I don't know what else could be wrong. Polycount shouldn't affect this.After putting a grid on a kerbal head texture, I found the white area on the male heads does not seem to be used for the teeth. I don't know what the white area is. The female texture doesn't even have it. Teeth must be another texture some place.It's a hack, the lower part of the texture (mouth and teeth) is not personalised, but the default texture is kept (the one from Default/ if present, stock otherwise). Female mouth is not textured in the stock model and this is the best way to prevent their hair mapping into their mouth while still making it possible to set their mouth textures. Quote Link to comment Share on other sites More sharing options...
Vorg Posted August 26, 2015 Share Posted August 26, 2015 (edited) Well, after a bit more testing, I found that one of the red blobs at the bottoms is used. It is the inside of the mouth, top and bottom. The other must be for tongue, but even in stock, I don't see a tongue on them, so maybe no used. The Female textures also have a red blob and I'm guessing that is their mouth inside. Haven't tested yet. Was hoping to add teeth pattern texture/NRM, but guess not. "but the default texture is kept (the one from Default/ if present, stock otherwise)"Ohh, if I put a custom texture in /Default it will do the teeth? Guessing the file name would need to be kerbalHead.dds? or would it be kerbalHead.tex.dds?The stock heads I found where:kbGeneKerman_head.tex.ddskerbal_old.tex.ddskerbalGirl_06_BaseColor.tex.ddskerbalHead.tex.ddskerbalHeadBeard.tex.ddsstubble.tex.ddswernerVonKerman_head.tex.ddsOk, this does work. A modded kerbalHead.dds file changed the teeth for both male and female kerbans. Also found that the tongue is only used for IVA's (the portrat and when in IVA looking at other kerbans). Edited August 27, 2015 by Vorg Quote Link to comment Share on other sites More sharing options...
shaw Posted August 29, 2015 Author Share Posted August 29, 2015 No part of female head texture is used for mouth, the red strip maps to their ponytails. Mouth on the original (not tweaked by TR) female model is not textured, there's just a solid colour assigned for each mesh. Quote Link to comment Share on other sites More sharing options...
locustgate Posted September 2, 2015 Share Posted September 2, 2015 None of the female visors are showing up. Quote Link to comment Share on other sites More sharing options...
Mitchz95 Posted September 2, 2015 Share Posted September 2, 2015 Does anyone know where I can find a bluish visor texture? None of the packs in the OP have them. Quote Link to comment Share on other sites More sharing options...
HafCoJoe Posted September 2, 2015 Share Posted September 2, 2015 Does anyone know where I can find a bluish visor texture? None of the packs in the OP have them.I could probably whip one up for you when I get home. Quote Link to comment Share on other sites More sharing options...
Mitchz95 Posted September 2, 2015 Share Posted September 2, 2015 I could probably whip one up for you when I get home.That would be awesome! Only if it's not too much trouble. Quote Link to comment Share on other sites More sharing options...
HafCoJoe Posted September 3, 2015 Share Posted September 3, 2015 That would be awesome! Only if it's not too much trouble. I hope this does the trick for you: EVAvisor.dds (Dropbox)Place it in default Quote Link to comment Share on other sites More sharing options...
Mitchz95 Posted September 3, 2015 Share Posted September 3, 2015 (edited) I hope this does the trick for you: EVAvisor.dds (Dropbox)Place it in defaultThank you! EDIT: I hate to nitpick, but ... could you possibly make it a little more transparent? What I'm going for is clear glass with a vague blue tint.EDIT2: Actually, just clear glass with no blue. Again, only if you have the time. Edited September 3, 2015 by Mitchz95 Quote Link to comment Share on other sites More sharing options...
enneract Posted September 3, 2015 Share Posted September 3, 2015 Any idea how to get suit/visor textures to apply to Valentina on the title screen? Quote Link to comment Share on other sites More sharing options...
BudgetHedgehog Posted September 3, 2015 Share Posted September 3, 2015 Any idea how to get suit/visor textures to apply to Valentina on the title screen?http://forum.kerbalspaceprogram.com/threads/131059-1-0-x-A-visor-for-Valentina Quote Link to comment Share on other sites More sharing options...
HafCoJoe Posted September 3, 2015 Share Posted September 3, 2015 You can redownload that same link Mitch, I changed it to a faded white. I'm not sure exactly what you want but that's the best I can do in 4 minutes before work Quote Link to comment Share on other sites More sharing options...
Mitchz95 Posted September 3, 2015 Share Posted September 3, 2015 You can redownload that same link Mitch, I changed it to a faded white. I'm not sure exactly what you want but that's the best I can do in 4 minutes before work That one is perfect. Thanks so much! Quote Link to comment Share on other sites More sharing options...
HafCoJoe Posted September 3, 2015 Share Posted September 3, 2015 That one is perfect. Thanks so much! It is? Sweet! I didn't have time to test it in game so I'm glad it looks nice! Quote Link to comment Share on other sites More sharing options...
nightingale Posted September 9, 2015 Share Posted September 9, 2015 Just have to pop in to say that I absolutely love the reflective visor in TextureReplacer. Also, teaser for what I'm working on (new contract pack):Val sees dead people... Quote Link to comment Share on other sites More sharing options...
amankd Posted September 12, 2015 Share Posted September 12, 2015 (edited) would you be able to add my texture pack to your mod list? halo based https://kerbalstuff.com/mod/1149/halo%20character%20costumesJavascript is disabled. View full album Edited September 12, 2015 by amankd Quote Link to comment Share on other sites More sharing options...
Shaymes Posted September 14, 2015 Share Posted September 14, 2015 (edited) since the update, my class / lvl base suite textures doesnt work. EVAhelmet.png and EVAhelmet1.png works correctly but EVAhelmet2.png EVAhelmet3.png EVAhelmet4.png EVAhelmet5.png doesnt work it just load EVAhelmet1.png if they higher then lvl 1all works fine with texture replacer 2.4.6 Edited September 14, 2015 by Shaymes Quote Link to comment Share on other sites More sharing options...
volcanicshrimp Posted September 14, 2015 Share Posted September 14, 2015 Would it be possible to separate the reflections and kerbal editing from the texture management and have them as different mods? I only use this for the cool reflections and stuff but the texture management can mess up some things such as icons from KerbinSide. Quote Link to comment Share on other sites More sharing options...
HafCoJoe Posted September 14, 2015 Share Posted September 14, 2015 Just doing a quick report, someone else has been having issues with kerbal-related textures on the KSPRC thread too. I'm just passing on word to here o/ Quote Link to comment Share on other sites More sharing options...
shaw Posted September 14, 2015 Author Share Posted September 14, 2015 since the update, my class / lvl base suite textures doesnt work. EVAhelmet.png and EVAhelmet1.png works correctly but EVAhelmet2.png EVAhelmet3.png EVAhelmet4.png EVAhelmet5.png doesnt work it just load EVAhelmet1.png if they higher then lvl 1all works fine with texture replacer 2.4.6I think I found the bug. Check this TextureReplacer.dll.Would it be possible to separate the reflections and kerbal editing from the texture management and have them as different mods? I only use this for the cool reflections and stuff but the texture management can mess up some things such as icons from KerbinSide.You must add the affected icon directories to `keepLoaded` array. Alternatively, you can disable texture unloading entirely by `isUnloadingEnabled = auto`. Quote Link to comment Share on other sites More sharing options...
Shaymes Posted September 14, 2015 Share Posted September 14, 2015 (edited) yes thx shaw, the new dll file works nicely you can release 2.4.9 here are my retextured biosuites to match lovly with the portais stats http://forum.kerbalspaceprogram.com/threads/120731-1-0-x-DMagic-s-Modlets-Latest-Update-Portrait-Stats-v6-0-8-26-2015portais icon and level stars on the helmet (link removed)here is the bugfix from shaw, so all works fine in texture replacer 2.4.8http://forum.kerbalspaceprogram.com/threads/107471-1-0-4-TextureReplacer-2-4-9-%2815-9-2015%29?p=2195470&viewfull=1#post2195470 Edited September 18, 2015 by Shaymes old file Quote Link to comment Share on other sites More sharing options...
Vorg Posted September 15, 2015 Share Posted September 15, 2015 That is more like what I've been thinking of doing for a custom suit with job type logo on the back of the helm and using the helm color bands. I was thinking of skill level rank on the arms and front of the helm but hadn't decided. Got bogged down doing heads with normal maps that add teeth, throat and maybe nose and ears. Quote Link to comment Share on other sites More sharing options...
Montag Posted September 17, 2015 Share Posted September 17, 2015 (edited) EDIT: Just put the files in the directories as stated below and used the easy GUI of TextureReplacer within the game to assign the suits to the classes and all is well.So if I wanted is to use Shayme's retextured biosuits with class and levels:1. Install TextureReplacer in the GameData folder like any other mods.2. Copy Shayme's suits (yellow, blue, red, green folders) in the Suits subdirectory under TextureReplacer3. Edit / add the following to the cfg file. I NEED HELP HERE GameData/TextureReplacer/ ClassSuits { Pilot = BS_Yellow Engineer = BS_Red Scientist = BS_Blue Tourist = BS_Green Suits/[<subDir>/]<suit>/kerbalMainGrey // IVA suit Suits/[<subDir>/]<suit>/kerbalMainGrey.png // IVA suit (level 1) Suits/[<subDir>/]<suit>/kerbalMainNRM.png // IVA suit normal map Suits/[<subDir>/]<suit>/kerbalHelmetGrey.png // IVA helmet Suits/[<subDir>/]<suit>/kerbalHelmetNRM // IVA & EVA helmet normal map Suits/[<subDir>/]<suit>/EVAtexture.png // EVA suit Suits/[<subDir>/]<suit>/EVAtextureNRM.png // EVA suit normal map Suits/[<subDir>/]<suit>/EVAhelmet.png // EVA helmet Suits/[<subDir>/]<suit>/EVAhelmet1.png // EVA helmet (level 1) Suits/[<subDir>/]<suit>/EVAhelmet2.png // EVA helmet (level 2) Suits/[<subDir>/]<suit>/EVAhelmet3.png // EVA helmet (level 3) Suits/[<subDir>/]<suit>/EVAhelmet4.png // EVA helmet (level 4) Suits/[<subDir>/]<suit>/EVAhelmet5.png // EVA helmet (level 5) Suits/[<subDir>/]<suit>/EVAjetpack.png // EVA jetpack Suits/[<subDir>/]<suit>/EVAjetpackNRM.png // EVA jetpack normal mapI am guessing that [<subDir>/] needs to be something else or does it use the classname Pilot = BS_Yellow automatically. Please help. Edited September 18, 2015 by Montag Quote Link to comment Share on other sites More sharing options...
Wercho Posted September 17, 2015 Share Posted September 17, 2015 Serious LassesThese packs were originally planned to add only especially feminine heads, since there didn't appear to be very many of those available previously. However, I now see that there's also a profound lack of diverse skin colors in the female head scene, so here's some heads for those of you who would prefer those without the makeup from the other two packs.Loving this pack, and eagerly awaiting Diverse Kerbal Lads.Minor bug report, the config file with Serious kerbal lasses doesn't capitalize the 'K' in LassKerb, so TR doesn't set the heads to only be female. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.