davide96

yes, but it was not happening before...

hello guys I have a small problem. The plume of the engines of the SRBs are on even when the SRBs are off. Can someone help me??? @DylanSemrau

would it be difficult to make a CFG file to make it compatible??

hello guys, does anybody have the patch or if exist the patch for the benjee10 shuttle mod to make it compatible with FAR?? thanks

follow @benjee10 It would be the best mod of the shuttle, as it already is, but it would be an added value

hi, is it compatible with KSRSS??? thanks!!!!!

where can I find those parts????

ok the problem should be solved, I don't know why when I installed the htrobotics from ckan he didn't install one patch in the folder, I had add the cfg missing manually downloading ht robotics from github

which one I have to download??? I don't understand, sorry

update, I find the IR config but is only for canadarm 1 . . /////Canadarm 1 elbow joint servo @PART[ht_C1_elbow]:NEEDS[MagicSmokeIndustries] { @description,0 = Powered by Infernal Robotics - Next. This elbow joint can rotate 180 degrees back on itself. @MODEL { @model = htRobotics/Parts/ht_C1_elbowIR } -NODE[TopJoint] {} -NODE[BottomJoint] {} -MODULE[ModuleRoboticServoHinge] {} node_stack_top = -0.0934, 0.1909, 0, 0, 1, 0, 1 node_stack_bottom = -0.0934, -0.1909, 0, 0, -1, 0, 1 MODULE { name = ModuleIRServo_v3 servoName = KerboArm1 Elbow axis = 0, 0, 1 pointer = 1, 0, 0 fixedMesh = armElbow_base movingMesh = armElbow_top isRotational = True hasMinMaxPosition = True minPosition = -180 maxPosition = 0 isFreeMoving = False electricChargeRequired = 2.5 isInverted = False isLocked = False canHaveLimits = True hasPositionLimit = False minPositionLimit = -180 maxPositionLimit = 0 factorAcceleration = 2 maxAcceleration = 2 accelerationLimit = 1 factorSpeed = 2 maxSpeed = 2 speedLimit = 1 factorForce = 35 maxForce = 30 forceLimit = 30 zeroNormal = 0 zeroInvert = 0 presetsS = -180.0|-90.0|0.0 availableModeS = Servo|Control //invertSymmetry = False soundFilePath = MagicSmokeIndustries/Sounds/infernalRoboticMotor // Motor loop sound path } } /////Canadarm 1 pitch joint servo @PART[ht_C1_pitch]:NEEDS[MagicSmokeIndustries] { @description,0 = Powered by Infernal Robotics - Next. This servo joint provides low torque rotation along the pitch axis up to 90 degrees in either direction. @MODEL { @model = htRobotics/Parts/ht_C1_pitchJointIR } -NODE[TopJoint] {} -NODE[BottomJoint] {} -MODULE[ModuleRoboticServoHinge] {} node_stack_top = 0, 0.1751, 0, 0, 1, 0, 1 node_stack_bottom = 0, -0.1871, 0, 0, -1, 0, 1 MODULE { name = ModuleIRServo_v3 servoName = KerboArm1 Pitch Joint axis = 0, 0, 1 pointer = 1, 0, 0 fixedMesh = armPitchJoint_base movingMesh = armPitchJoint_top isRotational = True hasMinMaxPosition = True minPosition = -90 maxPosition = 90 isFreeMoving = False electricChargeRequired = 2.5 isInverted = False isLocked = False canHaveLimits = True hasPositionLimit = False minPositionLimit = -90 maxPositionLimit = 90 factorAcceleration = 2 maxAcceleration = 2 accelerationLimit = 1 factorSpeed = 2 maxSpeed = 2 speedLimit = 1 factorForce = 35 maxForce = 30 forceLimit = 30 zeroNormal = 0 zeroInvert = 0 presetsS = -90.0|0.0|90.0 availableModeS = Servo|Control //invertSymmetry = False soundFilePath = MagicSmokeIndustries/Sounds/infernalRoboticMotor // Motor loop sound path } } /////Canadarm 1 rotational servo @PART[ht_C1_rotator]:NEEDS[MagicSmokeIndustries] { @description,0 = Powered by Infernal Robotics - Next. This servo allows a full 360 degrees of rotation axially. @MODEL { @model = htRobotics/Parts/ht_C1_rotatorIR } -NODE[TopJoint] {} -NODE[BottomJoint] {} -MODULE[ModuleRoboticRotationServo] {} node_stack_top = 0, 0.0209, 0, 0, 1, 0, 1 node_stack_bottom = 0, -0.0209, 0, 0, -1, 0, 1 MODULE { name = ModuleIRServo_v3 servoName = KerboArm1 Rotator axis = 0, 1, 0 pointer = 1, 0, 0 fixedMesh = armRotator_base movingMesh = armRotator_top isRotational = True hasMinMaxPosition = False minPosition = -360 maxPosition = 360 isFreeMoving = False electricChargeRequired = 2.5 isInverted = False isLocked = False canHaveLimits = True hasPositionLimit = False minPositionLimit = -360 maxPositionLimit = 360 factorAcceleration = 2 maxAcceleration = 2 accelerationLimit = 1 factorSpeed = 2 maxSpeed = 2 speedLimit = 1 factorForce = 35 maxForce = 30 forceLimit = 30 zeroNormal = 0 zeroInvert = 0 presetsS = -180.0|0.0|180.0 availableModeS = Servo|Control //invertSymmetry = False soundFilePath = MagicSmokeIndustries/Sounds/infernalRoboticMotor // Motor loop sound path } } this is the config, now the question is is there a way to add the config for only that piece of the kerboarm 2??? this is the CFG of the kerboarm 2 . . PART { name = ht_canadarm2_servo module = Part author = Benjee10 rescaleFactor = 1 TechRequired = advConstruction entryCost = 1200 cost = 100 category = Robotics subcategory = 0 title = KerboArm2 Servo Joint manufacturer = HabTech Consortium description = This servo allows a full 360 degrees of rotation. // attachment rules: stack, srfAttach, allowStack, allowSrfAttach, allowCollision attachRules = 1,0,1,1,0 mass = 0.06 dragModelType = default maximum_drag = 0.2 minimum_drag = 0.2 angularDrag = 1 crashTolerance = 12 breakingForce = 200 breakingTorque = 200 maxTemp = 2000 // = 5000 bulkheadProfiles = size1 tags = habtech, robot, arm, canadarm2, kerboarm, rotate, hinge, servo, motor, move, MODEL { model = htRobotics/Parts/ht_canadarm2_servo } NODE { name = TopJoint transform = actuatorTopNode size = 1 } NODE { name = BottomJoint transform = actuatorSideNode size = 1 } MODULE { name = ModuleRoboticRotationServo servoTransformName = actuatorMesh baseTransformName = actuatorBody servoAttachNodes = TopJoint traverseVelocityLimits = 0, 10 hardMinMaxLimits = -180, 180 softMinMaxAngles = -180, 180 targetAngle = 0 mainAxis = Y maxMotorOutput = 200 driveSpringMutliplier = 100 driveDampingMutliplier = 20 motorizedMassPerKN = 0.0001 motorizedCostPerDriveUnit = 1 connectedMassScale = 1 efficiency = 0.75 baseResourceConsumptionRate = 0.01 RESOURCE { name = ElectricCharge rate = 1 } } MODULE { name = ModuleCargoPart packedVolume = 20 } } I really hope that someone can help me

installed it with Habtech 2 stock, the strange think is that the kerboarm 1 (wich is the small one) works, but the kerboarm 2 (the big one on the iss) is not working

hello guys,does anybody know if it is possible to make this part here compatible with infernal robotics?? because the normal kerboarm from htrobotics works but this one no, and I was wandering if there is a modification that I can do the cfg file to make it compatible. thanks!!

hello guys,does anybody know if it is possible to make this part here compatible with infernal robotics??

doesn't work well??? unfortunatelly doesn't work at all =(

wonderfull, mods used??

any news???

Great pics, congratulations, how did you go about assembling the arm?? did you do it in orbit?

mmmmm.... for me it's very difficult understanding all of those things, and I feel a bit frustrated because I see other guys making their own config even if they have relatively low experience... and at the same time I fell a bit unconfortable because of bothering all of you..... I give up

Ah this is what I'm facing right now, I have FAR but I don't have real fuels...is this required?? Can I change the fuel used in the cfg file??

how can I insert this config?? just to give it a try???

Probably due to aerodynamic limitations as far as you know is it possible to tweak this??

Exactly, is there a way to troubleshoot the craft designs issue??

yes, but is not even compatible with an upscaled version of the stock system and with FAR....

Ehi, thank you very much for finding this configuration for me, I don't know if it is right because I don't use RO, I would like to play RSS (or a scaled version of kerbol like 10x) and to be able to fly the shuttle with far. Because of this

hello guys, can you please explain those screens? and if this boy is flyable or not? https://imgur.com/a/fFddBe5