komodo Posted October 14, 2016 Share Posted October 14, 2016 re: IVA, I don't have any handy, but I wanted to note that the "big black box" isn't actually a bug: It's the "placeholder" IVA that squad provides for cases like this where no iva exists. It's just that, a box with seats in it, the only purpose being to populate the face/joy/terror cams in the bottom right corner. The black box (which probably won't survive a crash) was the better option from nothing at all. Quote Link to comment Share on other sites More sharing options...
CobaltWolf Posted October 14, 2016 Author Share Posted October 14, 2016 4 hours ago, awsumindyman said: The block 2 also had a wider pressurized module, as well as an unpressurized trunk (kinda like the one for the Rhea resupply vehicle) squeezed between the pressure module and the control block. Yeah, I know. The Rhea was pretty directly inspired by it + the HTV. Come to think of it, I wonder if you can adapt the AARDV modules for use with the Transtage, make a Rhea Block 2 or something. Or even just Tweakscale them. Though a nearly flat 1.875m > 2.5m adapter would be hella useful. For those that haven't seen it and don't know what we're talking about, this is the Apollo-derived logistics vehicle that serviced Freedom in the 90s/late 80s, presumably continuing into the 2000s (but the focus of the timeline moves away from Freedom). Quote Link to comment Share on other sites More sharing options...
Foxxonius Augustus Posted October 14, 2016 Share Posted October 14, 2016 And @VenomousRequiem said, let there be Hype and there was Hype. Quote Link to comment Share on other sites More sharing options...
Rory Yammomoto Posted October 14, 2016 Share Posted October 14, 2016 Will this proposed 'Sky-Lab' have a seperate crew module and adapter? Either way, pretty awesome. Quote Link to comment Share on other sites More sharing options...
CobaltWolf Posted October 14, 2016 Author Share Posted October 14, 2016 10 minutes ago, Rory Yammomoto said: Will this proposed 'Sky-Lab' have a seperate crew module and adapter? Either way, pretty awesome. ??? Quote Link to comment Share on other sites More sharing options...
minepagan Posted October 14, 2016 Share Posted October 14, 2016 (edited) 24 minutes ago, Rory Yammomoto said: Will this proposed 'Sky-Lab' have a seperate crew module and adapter? Either way, pretty awesome. [REDACTED] Edited October 14, 2016 by minepagan Sekrit Dokuments Quote Link to comment Share on other sites More sharing options...
Rory Yammomoto Posted October 14, 2016 Share Posted October 14, 2016 3 minutes ago, CobaltWolf said: ??? oh goddamn it SKYLAB! WILL SKYLAB BE SPLIT INTO A CREW MODULE AND A DOCKING MODULE! I would love it if it were, as that way, I could use the habitation portion for interplanetary travels. Quote Link to comment Share on other sites More sharing options...
CobaltWolf Posted October 14, 2016 Author Share Posted October 14, 2016 2 minutes ago, Rory Yammomoto said: oh goddamn it SKYLAB! WILL SKYLAB BE SPLIT INTO A CREW MODULE AND A DOCKING MODULE! I would love it if it were, as that way, I could use the habitation portion for interplanetary travels. dontyellatme andimnotgonnatellyounowfigureitoutyourself Quote Link to comment Share on other sites More sharing options...
Rory Yammomoto Posted October 14, 2016 Share Posted October 14, 2016 Will this thread become serious now that it is in the new location? I loved the old, light-hearted, excrementspost-laden thread. Quote Link to comment Share on other sites More sharing options...
VenomousRequiem Posted October 14, 2016 Share Posted October 14, 2016 18 minutes ago, Rory Yammomoto said: Will this thread become serious now that it is in the new location? I loved the old, light-hearted, excrementspost-laden thread. As previously stated (by me, in a post I made, that tagged and called YOU and a couple others in particular out, that I know you saw) the other day, yes. Keep the memes in the respective section of the Discord, please. I know how @CobaltWolf likes his fair share of memes too, we've gotta keep this at least to a point where the moderators don't even have to think about us. Please and thank you. Have a fantastic day. Quote Link to comment Share on other sites More sharing options...
Drakenex Posted October 14, 2016 Share Posted October 14, 2016 Dear Wolfy, how are you going to animate ATM's deployment from launch config to orbit config? Like Raidernick's version? There will be a fairing base between the airlock and the workshop? Thanks! Quote Link to comment Share on other sites More sharing options...
CobaltWolf Posted October 14, 2016 Author Share Posted October 14, 2016 17 minutes ago, Drakenex said: Dear Wolfy, how are you going to animate ATM's deployment from launch config to orbit config? Like Raidernick's version? There will be a fairing base between the airlock and the workshop? Thanks! Likely going to be a sort of 'screw you, end user. undock this thing and redock it somehow'. Especially because then it works in the standalone Apollo/ATM freeflight configuration... Quote Link to comment Share on other sites More sharing options...
Drakenex Posted October 14, 2016 Share Posted October 14, 2016 oh! OK, May be a someone with a big soul (Or may be I figure it out) could make it work using Infernal Robotics, like I did before Thanks! Quote Link to comment Share on other sites More sharing options...
CobaltWolf Posted October 14, 2016 Author Share Posted October 14, 2016 Certainly not going to be anything stopping you. That's just not going to be the way the 'official' version works. Quote Link to comment Share on other sites More sharing options...
Daelkyr Posted October 14, 2016 Share Posted October 14, 2016 Okay... Modeling for Gemini done. Texture work... eventually. Quote Link to comment Share on other sites More sharing options...
CobaltWolf Posted October 14, 2016 Author Share Posted October 14, 2016 Whoa. D: That's AWESOME! Question - will it be possible to set up the occlusion so that you can see into the windows, but can't see in through the sides etc? Quote Link to comment Share on other sites More sharing options...
Daelkyr Posted October 14, 2016 Share Posted October 14, 2016 6 minutes ago, CobaltWolf said: Whoa. D: That's AWESOME! Question - will it be possible to set up the occlusion so that you can see into the windows, but can't see in through the sides etc? Yes. It's just making a version of the exterior model with transparent windows. Quote Link to comment Share on other sites More sharing options...
minepagan Posted October 14, 2016 Share Posted October 14, 2016 1 hour ago, Daelkyr said: Yes. It's just making a version of the exterior model with transparent windows. And how about the hatch too? Quote Link to comment Share on other sites More sharing options...
CobaltWolf Posted October 14, 2016 Author Share Posted October 14, 2016 50 minutes ago, minepagan said: And how about the hatch too? You mean so you can look at it from behind and see the Kerbal's back? I actually *don't* like that - if you leave it so the Kerbal can only be seen from the front it reinforces how claustrophobic that pod would be. Also, gotta mention it here too, but thanks to @Pak for the awesome new signature! Quote Link to comment Share on other sites More sharing options...
TaintedLion Posted October 14, 2016 Share Posted October 14, 2016 Hey @CobaltWolf, you know I love me some of that ETS, I'm willing to collaborate and do some models if you want me to. Maybe some IVAs, if I can, I know a fair bit of Blender. Quote Link to comment Share on other sites More sharing options...
minepagan Posted October 15, 2016 Share Posted October 15, 2016 4 hours ago, CobaltWolf said: You mean so you can look at it from behind and see the Kerbal's back? I actually *don't* like that - if you leave it so the Kerbal can only be seen from the front it reinforces how claustrophobic that pod would be. Also, gotta mention it here too, but thanks to @Pak for the awesome new signature! Nvm I thought it was the gemini pod, not the lander. I couldnt actually see the pic thanks to school wifi. Quote Link to comment Share on other sites More sharing options...
CobaltWolf Posted October 15, 2016 Author Share Posted October 15, 2016 (edited) 14 hours ago, TaintedLion said: Hey @CobaltWolf, you know I love me some of that ETS, I'm willing to collaborate and do some models if you want me to. Maybe some IVAs, if I can, I know a fair bit of Blender. I PM'd you. Edited October 15, 2016 by CobaltWolf Quote Link to comment Share on other sites More sharing options...
SpaceBadger007 Posted October 15, 2016 Share Posted October 15, 2016 8 hours ago, Daelkyr said: Okay... Modeling for Gemini done. Texture work... eventually. AWESOOOOOOOOOOME!! Quote Link to comment Share on other sites More sharing options...
Daelkyr Posted October 15, 2016 Share Posted October 15, 2016 59 minutes ago, CobaltWolf said: I PM'd you. I didn't get. Quote Link to comment Share on other sites More sharing options...
Beale Posted October 15, 2016 Share Posted October 15, 2016 A handful of UVs are flipped incorrectly. Literally unplayable. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.