[1.12.x] SXT Continued

mikerl · March 30, 2017

I had a different problem with the meadowlark, I can't use the crew report. After putting a Kerbal in one of the seats, I selected crew report, but KSP tells me "not enough crew" to perform it. I think this is due to the external seat and the pod lacks an internal seat, unless someone knows how to make it work.

S.C.E to AUX · March 30, 2017

I am having a problem with the truck wheels. It appears that they will not interact with the runway. Anything I should check?
Downloaded the latest CKAN release.

linuxgurugamer · March 30, 2017

They probably aren't oriented correctly. Make sure the arrows (V) on the wheels are pointing down

nobodyhasthis2 · March 30, 2017

4 hours ago, S.C.E to AUX said:

I am having a problem with the truck wheels. It appears that they will not interact with the runway. Anything I should check?
Downloaded the latest CKAN release.

Just make sure they are the right way on. Use the middle mouse button to scroll in behind the wheel. The arrows should be down and the shocks vertical.

If they are just put straight on without any rotation. The whole wheel mounting plate will not point down and you will see horizontal shocks.

S.C.E to AUX · March 31, 2017

Alright that fixed it. Thanks guys.

Tangent question with relation to the wheels. If I wanted to modify the cfg file so that the wheels had a bit more traction; which parameter would you change? The mass, minimum_drag or angular drag.

SA.

Bornholio · March 31, 2017

You should add description to the wheel next release

description = This wheel for the little yellow trucks, with tiny combined power unit, retardation device and very limited vector control, gives just enough movement for you not to have to push....much [Make sure the wheel is oriented correctly. The arrows should be down and the shocks vertical.]

I wish more details got added like that to troublesome parts. It would eliminate a few troubleshooting questions. (LGG should be renamed to Insane Fast Response Posse)

Edited March 31, 2017 by Bornholio
comment

linuxgurugamer · March 31, 2017

1 minute ago, Bornholio said:
You should add description to the wheel next release
description = This wheel for the little yellow trucks, with tiny combined power unit, retardation device and very limited vector control, gives just enough movement for you not to have to push....much [Make sure the wheel is oriented correctly. The arrows should be down and the shocks vertical.]
I wish more details got added like that to troublesome parts. It would eliminate a few troubleshooting questions.

Good description, I'm adding it right now

NISSKEPCSIM · April 1, 2017

Do you have plans to put up an updated download for KSC ++?

Aerospacer · April 2, 2017

16 hours ago, NISSKEPCSIM said:

Do you have plans to put up an updated download for KSC ++?

Answer here:

But I am have this plan.

Soon, but now you can to use this updated version - KSC++ v3A (working in 1.1.2, 1.1.3 and 1.2.X with new KK) from here:

Good luck.

NISSKEPCSIM · April 2, 2017

34 minutes ago, Aerospacer said:

*snip*

Thanks a lot! I really needed this as a set for my ksp novel, 'Kontakt,' which has a few pictures taken (ie: a jet pulled up at the runway, a motorcade pulling up outside R&D, etc.) that need to look like KSC has been upgraded.

Bornholio · April 3, 2017

Comment on current revision 0.3.10. It contains Retractable Lifting surfaces 0.1.2. which has a higher release revision (0.1.3) .

Should the RLS mod be included? Seems like this could cause update problems. Either way, fly safe.

StahnAileron · April 3, 2017

1 hour ago, Bornholio said:

Comment on current revision 0.3.10. It contains Retractable Lifting surfaces 0.1.2. which has a higher release revision (0.1.3) .

Should the RLS mod be included? Seems like this could cause update problems. Either way, fly safe.

RLS is needed for the wings included in the pack, so I'm guessing they wanted to keep the pack as a single DL. The way I see it, if the updated DLL is more useful, linuxgurugamer would've swapped it out and pushed an update out already. Seeing as the pack works out-of-the-box, it's probably not a pressing matter.

@linuxgurugamer is a busy man spread thin with all the mods he's adopted or has a hand in. If anything, he might have other changes pending that'll justify a version update that'll be a good excuse to include the new DLL. (Or is waiting for such changes and updates to come along from user feedback. He relies on the user-base in order to test, find, fix and update things.)

SXT is a pretty big mod too, filesize-wise. Unless the previous DLL had major bugs, pushing an update for just the DLL change is kinda excessive. I figure only players that deal with manual installed mods would care, and would do it on their own time and perogative. CKAN users shouldn't have to worry.

linuxgurugamer · April 3, 2017

The change to RLS is a phase in of the control surface. If you use CKAN the update will be installed automatically. If not, then the next release of SXT will have the new dll.

The RLS was just updated yesterday.

Edited April 3, 2017 by linuxgurugamer

Drew Kerman · April 8, 2017

there are still PNG textures in the Clyde, Duna and ke111 interior folders. Is this intentional or were they overlooked? I just converted the Clyde textures to DDS with no problem

linuxgurugamer · April 8, 2017

3 hours ago, Drew Kerman said:

there are still PNG textures in the Clyde, Duna and ke111 interior folders. Is this intentional or were they overlooked? I just converted the Clyde textures to DDS with no problem

If you want to convert them and send them to me, I'll be glad to include them.

Just overlooked.

mechanicH · April 8, 2017

@linuxgurugamer I had a issue with the 3.10 release, it was with the tweak scaling of the parts. It seems to have broken some of my craft that was built from the previous version 3.9.1 ...basically what happen is that some craft were missing its tail cones and other craft that had the hump back have grown in size (the hump itself) which threw my craft out of proportion making them look disfigured. I was forced to revert back to 3.9.1 because in 3.10 i would basically have to rebuild the whole thing (i have quite a lot of craft that use this mod)...and most of these were uploaded to KerbalX so i can imagine what people are getting when they load up the craft...is there any way this could be fixed, so i wont have to go back and fix every single craft with this issue. Thank you for your time.

eberkain · April 8, 2017

2 hours ago, mechanicH said:

@linuxgurugamer I had a issue with the 3.10 release, it was with the tweak scaling of the parts. It seems to have broken some of my craft that was built from the previous version 3.9.1 ...basically what happen is that some craft were missing its tail cones and other craft that had the hump back have grown in size (the hump itself) which threw my craft out of proportion making them look disfigured. I was forced to revert back to 3.9.1 because in 3.10 i would basically have to rebuild the whole thing (i have quite a lot of craft that use this mod)...and most of these were uploaded to KerbalX so i can imagine what people are getting when they load up the craft...is there any way this could be fixed, so i wont have to go back and fix every single craft with this issue. Thank you for your time.

No need to double post. That sounds like a bug I encountered when changing the scaling type of parts to something that used a different set of relative numbers. Like surface uses 1.0 as a default and free uses 100. If you take a part that was surface and make it free the load a vessel that used it, the part would vanish, its technically still there, just scaled to 1% because it was saved with a scale factor of 1.0, but its now expecting a 100 to be that size part. I made sure not to change any scale types. I looked at the commit and I did change the default scale of surface attach parts, they were all set to 1.25 and I made them 1.0. Its seems like having the default scale set to 1.25 would have made the part a different base size depending on if you had tweakscale installed or not, which seemed like a bad idea.

If you want to perform an experiment, try editing the config and replace every instance of

   type = surface
   defaultScale = 1.0

with

   type = surface
   defaultScale = 1.25

and load the vessel again. Other than that I don't see how anything I changed could be causing problems.

Drew Kerman · April 8, 2017

7 hours ago, linuxgurugamer said:

If you want to convert them and send them to me, I'll be glad to include them.

Only using the Clyde right now, so here are the texture changes that I know work - clydeInternal.zip

I didn't like the "tinted" windows since you could see a large texture seam around the edges so I made the model000.dds file completely transparent. if anyone wants the windows tinted a bit dark grey just rename the model000.tint file to model000.dds after deleting/renaming the current file.

mechanicH · April 8, 2017

@eberkain I do apologize for the double post I just was not sure where to address this issue. But I'm guessing you are correct about the scaling part and the relative numbers and due to the new tweak scale config it might have shrunk or grown due to it. I will try that experiment and report back to you tonight (at work at the moment). Thank you

mechanicH · April 9, 2017

@eberkain Ok so did as you said..and did the experiment...and it WORKS..well partially...it worked perfectly on the hump back part like a charm..all craft that had it installed came back to proper size... Now the only problem i cant figure out is why the nose cone is missing...to be very specific it is the Conformal Rocket Cone Mk3....i use it as a tail cone for most my jet liners ...now the part itself is there in the list(in game) and in the cfg and i think its properly written in for the tweak scale..but for the life of me i cant figure out why it disappears from the craft along with everything that is attached to it..i been looking through the files for a few hours now, but i haven't figured it out yet...if you have time can you give it a look....like is said before in 3.9.1 it pops up on the craft..but in 3.10 it pulls a Houdini on me. Oh i also edited the TweakScale file for all surface parts to 1.25 and found a few surface parts that were missing the defaultScale, ill put it up here if you want to put it in your next update. Let me know if you find anything on that nose cone.. Thanks you

Spoiler

TWEAKSCALEEXPONENTS:NEEDS[KAS&TweakScale]
{
   name = KASModuleContainer
   maxSize = 3
}
@PART[SXTtruckbox]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = free
   }
}
@PART[SXTOsualRadCockpit]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTOsaulNoseCockpitAn225]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[625mBonny]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 0.625
   }
}
@PART[LMiniAircaftTail]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 0.625
   }
}
@PART[SXTAntenna]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = free
   }
}
@PART[SXTSputnik]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Science]/MODULE[TweakScale] { }
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 0.625
   }
}
@PART[SXTHECSRanger]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Science]/MODULE[TweakScale] { }
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 1.25
   }
}
@PART[25mKossak]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[MEMDescentMod]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 1.25
   }
}
@PART[MEMLander]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 1.25
   }
}
@PART[LprobeFoil]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 1.25
   }
}
@PART[LRadialAirIntake]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 1.25
   }
}
@PART[SXTInlineAirIntake]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 1.25
   }
}
@PART[SXTInlineAirIntakeTiny]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 0.625
   }
}
@PART[SXTInlineAirIntakeTLarge]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTWingSmall]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = surface
defaultScale = 1.25
   }
}
@PART[SXTWingLarge]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = surface
defaultScale = 1.25
   }
}
@PART[SXTOMS]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = surface
defaultScale = 1.25
   }
}
@PART[RCSBoonExt]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = surface
defaultScale = 1.25
   }
}
@PART[SXTRCSRack]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = surface
defaultScale = 1.25
   }
}
@PART[SXTVernier885]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = surface
defaultScale = 1.25
   }
}
@PART[SXTDepolyRTGII]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = surface
defaultScale = 1.25
   }
}
@PART[SXTDepolyRTGI]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = surface
defaultScale = 1.25
   }
}
@PART[SXTsolarPanelhex]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = surface
defaultScale = 1.25
   }
}
@PART[SXTsolarPanelLarge]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = surface
defaultScale = 1.25
   }
}
@PART[SXTKe90TurboJet]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTLT80]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 1.25
   }
}
@PART[SXTK1BaseLarge]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 5.0
   }
}
@PART[SXTK1Base5m]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 5.0
   }
}
@PART[SXTK1Base]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTK1Decoupler]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTNK21BlockV]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTadapterSize3Mk3]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
   type = stack
   defaultScale = 3.75
   }
}
@PART[SXTNERVA]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTNERVAB]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTMiniJet]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 0.625
   }
}
@PART[SXTTinyprop]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 0.625
   }
}
@PART[SXTcapsuleshield]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTAirbag]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = surface
defaultScale = 1.25
   }
}
@PART[SXTAirbagSmall]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = surface
defaultScale = 1.25
   }
}
@PART[SXTPipeGLong]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = adapter_1_2
//defaultScale = 1.25
   }
}
@PART[SXTPipeHub]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = adapter_1_2
// defaultScale = 1.25
   }
}
@PART[SXTPipeLong]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = adapter_1_2
//defaultScale = 1.25
   }
}
@PART[SXTPipeShort]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = adapter_1_2
//defaultScale = 1.25
   }
}
@PART[SXTPipeTurn]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = adapter_1_2
//defaultScale = 1.25
   }
}
@PART[SXTTriHexagon]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = free
defaultScale = 1.25
   }
}
@PART[SXTTriangleRightangle]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 1.25
   }
}
@PART[SXT375mCAdaptor]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXT375mA]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXT375mB]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXT375mC]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTFuel625m]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 0.625
   }
}
@PART[STXCANIOT]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTCargoBay1]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[LMkIAircaftFus]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 1.25
   }
}
@PART[LMkIIIAircaftFusLong]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[LMkIIIAircaftFus]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[LMkIIAircaftTail]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTradialWindow]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = surface
defaultScale = 1.25
   }
}
@PART[SXTBalloon]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTBalloonGold]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTBalloonGoldB]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTMTVGirder]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTMTVGirderBasic]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTMTVGirderOpen]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTMTVGirderOpenSmall]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTBalloon375]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTBalloonGold375]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTBalloonGoldB375]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTMTVGirder375]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTMTVGirderBasic375]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTMTVGirderOpenSmall375]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXT16FuelTank]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXT32FuelTank]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXT64FuelTank]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTOsaulNoseCockpitAn225]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTOsualHullLarge]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTOsualRadCockpit]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = surface
defaultScale = 1.25
   }
}
@PART[SXTOsualRadHull]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = surface
defaultScale = 1.25
   }
}
@PART[SXTOsualRadHullEnd]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = surface
defaultScale = 1.25
   }
}
@PART[SXTradialFuel]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = surface
defaultScale = 1.25
   }
}
@PART[SXTDLK83EHabitat]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 5.0
   }
}
@PART[LFUELM3]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTISSHabISK30]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTLander]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[LSVCM3]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[LSmallFuelMod]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[L25mSci]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[LSmallSvcMod]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTCrewCabSSP10]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTCrewCabSSP20]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTSPKTRCabin]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTKDBTsar1]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTKDBTsar2]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTKDBTsar3]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 5.0
   }
}
@PART[SXTSaturnV1]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 5.0
   }
}
@PART[SXTSaturnV1-2Sep]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 5.0
   }
}
@PART[SXTSaturnV1-2SepSmall]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 5.0
   }
}
@PART[SXTSaturnV1Base]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTSaturnV2]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 5.0
   }
}
@PART[SXTSaturnV2-3Sep]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 5.0
   }
}
@PART[SXTSaturnV2Engine]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 5.0
   }
}
@PART[SXTSaturnV3]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTSaturnV3Enginge]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTNERVASATC5N]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTSaturnV3Upper]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXT5mTank0*]:NEEDS[TweakScale] //2 parts
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 5
   }
}
@PART[SXTOsualTailLarge]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
       type = stack
       defaultScale = 3.75
    }
}
@PART[SXT375mProbe]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
       type = stack
       defaultScale = 3.75
    }
}
@PART[SXT625mFuel4]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 0.625
   }
}
@PART[SXTelevon*]:NEEDS[TweakScale] // 4 parts
{
   %MODULE[TweakScale]
   {
type = free
   }
}
@PART[SXTWing*]:NEEDS[TweakScale] // 6 parts
{
   %MODULE[TweakScale]
   {
type = free
   }
}
@PART[SXTAirbrake*]:NEEDS[TweakScale] // 3 parts
{
   %MODULE[TweakScale]
   {
type = free
   }
}
@PART[SXTengineattachment*]:NEEDS[TweakScale] // 2 parts
{
   %MODULE[TweakScale]
   {
type = free
   }
}

//NEW ENGINES
@PART[SXTVTOLturboFan]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = free
}
}

@PART[SXTnuclearramjet]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
defaultScale = 1.25
}
}

@PART[SXTKO211Dprop]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
defaultScale = 0.625
}
}

@PART[SXTKO211prop]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
defaultScale = 1.25
}
}

@PART[SXTeFan]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = surface
defaultScale = 1.25
}
}

@PART[SXTJ213]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
defaultScale = 1.25
}
}

@PART[SXTLANCER]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
defaultScale = 2.5
}
}

@PART[SXTshockConeIntakeSize2]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
defaultScale = 2.5
}
}

@PART[SXTMerlin66prop]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
defaultScale = 0.625
}
}

@PART[SXTNK12M]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
defaultScale = 1.25
}
}

@PART[SXTPWPT6]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
defaultScale = 1.25
}
}

@PART[SXTPWR2800]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
defaultScale = 1.25
}
}
@PART[SXTRadialAirIntakeShockCone]:NEEDS[TweakScale]
{
%MODULE[TweakScale]
{
type = surface
       defaultScale = 1.25
}
}
@PART[SXTInlineAirIntake]:NEEDS[TweakScale]
{
%MODULE[TweakScale]
{
type = stack
defaultScale = 1.25
}
}
@PART[SXTSmallFuselage]:NEEDS[TweakScale]
{
%MODULE[TweakScale]
{
type = stack
defaultScale = 0.625
}
}
@PART[SXTsmallbicoupleradaptor]:NEEDS[TweakScale]
{
%MODULE[TweakScale]
{
type = adapter_1_2
defaultScale = 1.25
}
}
@PART[SXTAn225Ramp]:NEEDS[TweakScale]
{
%MODULE[TweakScale]
{
type = free
}
}
@PART[SXTmk2*]:NEEDS[TweakScale] // 5 parts
{
%MODULE[TweakScale]
{
type = stack
       defaultScale = 1.25
}
}
@PART[SXTMk2LinearAerospike]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
}
@PART[SXTmk2cargoadapter]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
}
@PART[SXTsciencenosecone]:NEEDS[TweakScale] //
{
%MODULE[TweakScale]
{
type = stack
       defaultScale = 1.25
}
}
@PART[SXTfloat*]:NEEDS[TweakScale] // 3 parts
{
%MODULE[TweakScale]
{
type = free
}
}
@PART[SXTAlouetteI]:NEEDS[TweakScale] // Probodobodyne TET-G
{
#@TWEAKSCALEBEHAVIOR[Science]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = free
}
}
@PART[SXTProtonlikeNoseCone]:NEEDS[TweakScale] //
{
%MODULE[TweakScale]
{
type = stack
       defaultScale = 1.25
}
}
@PART[SXTBlackAdder]:NEEDS[TweakScale] //
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
       defaultScale = 1.25
}
}
@PART[SXTBlackAdder2]:NEEDS[TweakScale] //
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
       defaultScale = 0.625
}
}
@PART[SXTWaxWing]:NEEDS[TweakScale] //
{
#@TWEAKSCALEBEHAVIOR[SRB]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
       defaultScale = 0.625
}
}
@PART[SXTCommodore]:NEEDS[TweakScale] //
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
       defaultScale = 2.5
}
}
@PART[SXTKD170]:NEEDS[TweakScale] //
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
       defaultScale = 2.5
}
}
@PART[SXTCastor30]:NEEDS[TweakScale] //
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
       defaultScale = 1.25
}
}
@PART[SXTKOPO4E]:NEEDS[TweakScale] //
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
       defaultScale = 2.5
}
}
@PART[SXTSize2SRB]:NEEDS[TweakScale] //
{
#@TWEAKSCALEBEHAVIOR[SRB]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
       defaultScale = 2.5
}
}
@PART[SXTAJ10*]:NEEDS[TweakScale] // 2 parts
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
       defaultScale = 0.625
}
}
@PART[SXTX405]:NEEDS[TweakScale] //
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
       defaultScale = 0.625
}
}
@PART[sxtshroudradialhardpoint]:NEEDS[TweakScale] //
{
%MODULE[TweakScale]
{
type = free
}
}
@PART[SXTsize2to3Adaptor]:NEEDS[TweakScale] //
{
%MODULE[TweakScale]
{
type = stack
       defaultScale = 3.75
}
}
@PART[SXT5mQuadAdaptor]:NEEDS[TweakScale] //
{
%MODULE[TweakScale]
{
type = stack
       defaultScale = 5.0
}
}
@PART[SXTTank1]:NEEDS[TweakScale] //
{
%MODULE[TweakScale]
{
type = stack
       defaultScale = 5.0
}
}
@PART[SXT5m5wayAdaptor]:NEEDS[TweakScale] //
{
%MODULE[TweakScale]
{
type = stack
       defaultScale = 5.0
}
}
@PART[SXTn1GridFin]:NEEDS[TweakScale] //
{
%MODULE[TweakScale]
{
type = surface
       defaultScale = 1.25
}
}
@PART[SXTtruck*]:NEEDS[TweakScale] //
{
%MODULE[TweakScale]
{
type = free
}
}
@PART[TGWheel]:NEEDS[TweakScale] //
{
%MODULE[TweakScale]
{
type = free
}
}

eberkain · April 9, 2017

13 minutes ago, mechanicH said:

@eberkain Ok so did as you said..and did the experiment...and it WORKS..well partially...it worked perfectly on the hump back part like a charm..all craft that had it installed came back to proper size... Now the only problem i cant figure out is why the nose cone is missing...to be very specific it is the Conformal Rocket Cone Mk3....i use it as a tail cone for most my jet liners ...now the part itself is there in the list(in game) and in the cfg and i think its properly written in for the tweak scale..but for the life of me i cant figure out why it disappears from the craft along with everything that is attached to it..i been looking through the files for a few hours now, but i haven't figured it out yet...if you have time can you give it a look....like is said before in 3.9.1 it pops up on the craft..but in 3.10 it pulls a Houdini on me. Oh i also edited the TweakScale file for all surface parts to 1.25 and found a few surface parts that were missing the defaultScale, ill put it up here if you want to put it in your next update. Let me know if you find anything on that nose cone.. Thanks you

Reveal hidden contents

TWEAKSCALEEXPONENTS:NEEDS[KAS&TweakScale]
{
   name = KASModuleContainer
   maxSize = 3
}
@PART[SXTtruckbox]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = free
   }
}
@PART[SXTOsualRadCockpit]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTOsaulNoseCockpitAn225]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[625mBonny]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 0.625
   }
}
@PART[LMiniAircaftTail]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 0.625
   }
}
@PART[SXTAntenna]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = free
   }
}
@PART[SXTSputnik]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Science]/MODULE[TweakScale] { }
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 0.625
   }
}
@PART[SXTHECSRanger]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Science]/MODULE[TweakScale] { }
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 1.25
   }
}
@PART[25mKossak]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[MEMDescentMod]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 1.25
   }
}
@PART[MEMLander]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 1.25
   }
}
@PART[LprobeFoil]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 1.25
   }
}
@PART[LRadialAirIntake]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 1.25
   }
}
@PART[SXTInlineAirIntake]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 1.25
   }
}
@PART[SXTInlineAirIntakeTiny]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 0.625
   }
}
@PART[SXTInlineAirIntakeTLarge]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTWingSmall]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = surface
defaultScale = 1.25
   }
}
@PART[SXTWingLarge]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = surface
defaultScale = 1.25
   }
}
@PART[SXTOMS]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = surface
defaultScale = 1.25
   }
}
@PART[RCSBoonExt]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = surface
defaultScale = 1.25
   }
}
@PART[SXTRCSRack]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = surface
defaultScale = 1.25
   }
}
@PART[SXTVernier885]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = surface
defaultScale = 1.25
   }
}
@PART[SXTDepolyRTGII]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = surface
defaultScale = 1.25
   }
}
@PART[SXTDepolyRTGI]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = surface
defaultScale = 1.25
   }
}
@PART[SXTsolarPanelhex]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = surface
defaultScale = 1.25
   }
}
@PART[SXTsolarPanelLarge]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = surface
defaultScale = 1.25
   }
}
@PART[SXTKe90TurboJet]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTLT80]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 1.25
   }
}
@PART[SXTK1BaseLarge]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 5.0
   }
}
@PART[SXTK1Base5m]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 5.0
   }
}
@PART[SXTK1Base]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTK1Decoupler]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTNK21BlockV]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTadapterSize3Mk3]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
   type = stack
   defaultScale = 3.75
   }
}
@PART[SXTNERVA]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTNERVAB]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTMiniJet]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 0.625
   }
}
@PART[SXTTinyprop]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 0.625
   }
}
@PART[SXTcapsuleshield]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTAirbag]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = surface
defaultScale = 1.25
   }
}
@PART[SXTAirbagSmall]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = surface
defaultScale = 1.25
   }
}
@PART[SXTPipeGLong]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = adapter_1_2
//defaultScale = 1.25
   }
}
@PART[SXTPipeHub]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = adapter_1_2
// defaultScale = 1.25
   }
}
@PART[SXTPipeLong]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = adapter_1_2
//defaultScale = 1.25
   }
}
@PART[SXTPipeShort]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = adapter_1_2
//defaultScale = 1.25
   }
}
@PART[SXTPipeTurn]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = adapter_1_2
//defaultScale = 1.25
   }
}
@PART[SXTTriHexagon]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = free
defaultScale = 1.25
   }
}
@PART[SXTTriangleRightangle]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 1.25
   }
}
@PART[SXT375mCAdaptor]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXT375mA]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXT375mB]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXT375mC]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTFuel625m]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 0.625
   }
}
@PART[STXCANIOT]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTCargoBay1]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[LMkIAircaftFus]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 1.25
   }
}
@PART[LMkIIIAircaftFusLong]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[LMkIIIAircaftFus]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[LMkIIAircaftTail]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTradialWindow]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = surface
defaultScale = 1.25
   }
}
@PART[SXTBalloon]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTBalloonGold]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTBalloonGoldB]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTMTVGirder]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTMTVGirderBasic]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTMTVGirderOpen]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTMTVGirderOpenSmall]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTBalloon375]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTBalloonGold375]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTBalloonGoldB375]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTMTVGirder375]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTMTVGirderBasic375]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTMTVGirderOpenSmall375]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXT16FuelTank]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXT32FuelTank]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXT64FuelTank]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTOsaulNoseCockpitAn225]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTOsualHullLarge]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTOsualRadCockpit]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = surface
defaultScale = 1.25
   }
}
@PART[SXTOsualRadHull]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = surface
defaultScale = 1.25
   }
}
@PART[SXTOsualRadHullEnd]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = surface
defaultScale = 1.25
   }
}
@PART[SXTradialFuel]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = surface
defaultScale = 1.25
   }
}
@PART[SXTDLK83EHabitat]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 5.0
   }
}
@PART[LFUELM3]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTISSHabISK30]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTLander]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[LSVCM3]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[LSmallFuelMod]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[L25mSci]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[LSmallSvcMod]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTCrewCabSSP10]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTCrewCabSSP20]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTSPKTRCabin]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTKDBTsar1]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTKDBTsar2]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTKDBTsar3]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 5.0
   }
}
@PART[SXTSaturnV1]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 5.0
   }
}
@PART[SXTSaturnV1-2Sep]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 5.0
   }
}
@PART[SXTSaturnV1-2SepSmall]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 5.0
   }
}
@PART[SXTSaturnV1Base]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTSaturnV2]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 5.0
   }
}
@PART[SXTSaturnV2-3Sep]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 5.0
   }
}
@PART[SXTSaturnV2Engine]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 5.0
   }
}
@PART[SXTSaturnV3]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTSaturnV3Enginge]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXTNERVASATC5N]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 2.5
   }
}
@PART[SXTSaturnV3Upper]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 3.75
   }
}
@PART[SXT5mTank0*]:NEEDS[TweakScale] //2 parts
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 5
   }
}
@PART[SXTOsualTailLarge]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
       type = stack
       defaultScale = 3.75
    }
}
@PART[SXT375mProbe]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
       type = stack
       defaultScale = 3.75
    }
}
@PART[SXT625mFuel4]:NEEDS[TweakScale]
{
   %MODULE[TweakScale]
   {
type = stack
defaultScale = 0.625
   }
}
@PART[SXTelevon*]:NEEDS[TweakScale] // 4 parts
{
   %MODULE[TweakScale]
   {
type = free
   }
}
@PART[SXTWing*]:NEEDS[TweakScale] // 6 parts
{
   %MODULE[TweakScale]
   {
type = free
   }
}
@PART[SXTAirbrake*]:NEEDS[TweakScale] // 3 parts
{
   %MODULE[TweakScale]
   {
type = free
   }
}
@PART[SXTengineattachment*]:NEEDS[TweakScale] // 2 parts
{
   %MODULE[TweakScale]
   {
type = free
   }
}

//NEW ENGINES
@PART[SXTVTOLturboFan]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = free
}
}

@PART[SXTnuclearramjet]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
defaultScale = 1.25
}
}

@PART[SXTKO211Dprop]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
defaultScale = 0.625
}
}

@PART[SXTKO211prop]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
defaultScale = 1.25
}
}

@PART[SXTeFan]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = surface
       defaultScale = 1.25
}
}

@PART[SXTJ213]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
defaultScale = 1.25
}
}

@PART[SXTLANCER]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
defaultScale = 2.5
}
}

@PART[SXTshockConeIntakeSize2]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
defaultScale = 2.5
}
}

@PART[SXTMerlin66prop]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
defaultScale = 0.625
}
}

@PART[SXTNK12M]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
defaultScale = 1.25
}
}

@PART[SXTPWPT6]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
defaultScale = 1.25
}
}

@PART[SXTPWR2800]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
defaultScale = 1.25
}
}
@PART[SXTRadialAirIntakeShockCone]:NEEDS[TweakScale]
{
%MODULE[TweakScale]
{
type = surface
       defaultScale = 1.25
}
}
@PART[SXTInlineAirIntake]:NEEDS[TweakScale]
{
%MODULE[TweakScale]
{
type = stack
defaultScale = 1.25
}
}
@PART[SXTSmallFuselage]:NEEDS[TweakScale]
{
%MODULE[TweakScale]
{
type = stack
defaultScale = 0.625
}
}
@PART[SXTsmallbicoupleradaptor]:NEEDS[TweakScale]
{
%MODULE[TweakScale]
{
type = adapter_1_2
defaultScale = 1.25
}
}
@PART[SXTAn225Ramp]:NEEDS[TweakScale]
{
%MODULE[TweakScale]
{
type = free
}
}
@PART[SXTmk2*]:NEEDS[TweakScale] // 5 parts
{
%MODULE[TweakScale]
{
type = stack
       defaultScale = 1.25
}
}
@PART[SXTMk2LinearAerospike]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
}
@PART[SXTmk2cargoadapter]:NEEDS[TweakScale]
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
}
@PART[SXTsciencenosecone]:NEEDS[TweakScale] //
{
%MODULE[TweakScale]
{
type = stack
       defaultScale = 1.25
}
}
@PART[SXTfloat*]:NEEDS[TweakScale] // 3 parts
{
%MODULE[TweakScale]
{
type = free
}
}
@PART[SXTAlouetteI]:NEEDS[TweakScale] // Probodobodyne TET-G
{
#@TWEAKSCALEBEHAVIOR[Science]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = free
}
}
@PART[SXTProtonlikeNoseCone]:NEEDS[TweakScale] //
{
%MODULE[TweakScale]
{
type = stack
       defaultScale = 1.25
}
}
@PART[SXTBlackAdder]:NEEDS[TweakScale] //
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
       defaultScale = 1.25
}
}
@PART[SXTBlackAdder2]:NEEDS[TweakScale] //
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
       defaultScale = 0.625
}
}
@PART[SXTWaxWing]:NEEDS[TweakScale] //
{
#@TWEAKSCALEBEHAVIOR[SRB]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
       defaultScale = 0.625
}
}
@PART[SXTCommodore]:NEEDS[TweakScale] //
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
       defaultScale = 2.5
}
}
@PART[SXTKD170]:NEEDS[TweakScale] //
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
       defaultScale = 2.5
}
}
@PART[SXTCastor30]:NEEDS[TweakScale] //
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
       defaultScale = 1.25
}
}
@PART[SXTKOPO4E]:NEEDS[TweakScale] //
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
       defaultScale = 2.5
}
}
@PART[SXTSize2SRB]:NEEDS[TweakScale] //
{
#@TWEAKSCALEBEHAVIOR[SRB]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
       defaultScale = 2.5
}
}
@PART[SXTAJ10*]:NEEDS[TweakScale] // 2 parts
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
       defaultScale = 0.625
}
}
@PART[SXTX405]:NEEDS[TweakScale] //
{
#@TWEAKSCALEBEHAVIOR[Engine]/MODULE[TweakScale] { }
%MODULE[TweakScale]
{
type = stack
       defaultScale = 0.625
}
}
@PART[sxtshroudradialhardpoint]:NEEDS[TweakScale] //
{
%MODULE[TweakScale]
{
type = free
}
}
@PART[SXTsize2to3Adaptor]:NEEDS[TweakScale] //
{
%MODULE[TweakScale]
{
type = stack
       defaultScale = 3.75
}
}
@PART[SXT5mQuadAdaptor]:NEEDS[TweakScale] //
{
%MODULE[TweakScale]
{
type = stack
       defaultScale = 5.0
}
}
@PART[SXTTank1]:NEEDS[TweakScale] //
{
%MODULE[TweakScale]
{
type = stack
       defaultScale = 5.0
}
}
@PART[SXT5m5wayAdaptor]:NEEDS[TweakScale] //
{
%MODULE[TweakScale]
{
type = stack
       defaultScale = 5.0
}
}
@PART[SXTn1GridFin]:NEEDS[TweakScale] //
{
%MODULE[TweakScale]
{
type = surface
       defaultScale = 1.25
}
}
@PART[SXTtruck*]:NEEDS[TweakScale] //
{
%MODULE[TweakScale]
{
type = free
}
}
@PART[TGWheel]:NEEDS[TweakScale] //
{
%MODULE[TweakScale]
{
type = free
}
}

The nosecone is part name SXTProtonlikeNoseCone and that is one of the parts that did not have tweakscale. I would say that it is loading the part and looking for a tweakscale value, but not finding one so not telling what it is doing. One would hope that it would assign a default value based on the config type, but looks like it doesn't? You could either delete that part from the tweakscale config, that should let you load it back up, or try making a backup of the vessel file and edit it by hand to add in the tweakscale node with its default scaling size. @pellinor what is your take?

pellinor · April 9, 2017

15 hours ago, eberkain said:

Its seems like having the default scale set to 1.25 would have made the part a different base size depending on if you had tweakscale installed or not

This value should only tell the UI what the unscaled part size is called. So if you set 1.25 you should still get the unscaled part, and the UI should show "1.25" (in the case of the surface scaletype). I think I did also make sure that saved crafts would survive a change of defaultScale. I am only aware of issues if defaultScale is not a legal value, for example if defaultScale=1 and the range is from 10-400[%]. The the UI will jump to the nearest legal value (in this case 10), and the part will be huge. Or the other extreme: with type=surface and defaultScale=100 the part will seem to vanish because the max allowed scale of that type is 4.

2 hours ago, eberkain said:

The nosecone is part name SXTProtonlikeNoseCone and that is one of the parts that did not have tweakscale. I would say that it is loading the part and looking for a tweakscale value, but not finding one so not telling what it is doing.

I don't see anything wrong with that particular part patch. Generally it should be perfectly safe to add and remove a TweakScale module from an unscaled part. The only thing I had happen for custom patches is the effect from above with defaultScale outside of the scaling range.

Edited April 9, 2017 by pellinor

linuxgurugamer · April 9, 2017

14 hours ago, Drew Kerman said:

Only using the Clyde right now, so here are the texture changes that I know work - clydeInternal.zip

I didn't like the "tinted" windows since you could see a large texture seam around the edges so I made the model000.dds file completely transparent. if anyone wants the windows tinted a bit dark grey just rename the model000.tint file to model000.dds after deleting/renaming the current file.

Ok, I've merged your file.

Are you going to get to the others soon? I'm trying to decide whether to release this or wait for more changes.

mechanicH · April 9, 2017

@eberkain upon further investigation i have found that when i load the vessel and look at the debug console i find it throwing up a Warning [TweakScale Warning] Duplicate TweakScale module on part [SXTProtonlikeNoseCone] Conformal Rocket Cone Mk3...any ideas?

EDIT....i have solved the issue....so this is the line of code that needs to be chaged to make everything back to normal for the nose cone

@PART[SXTProtonlikeNoseCone]:NEEDS[TweakScale] //
{
%MODULE[TweakScale]
{
type = free
}

If you would be so kind as to mend these in your next update i would greatly appreciate it...thank you Sir.

Edited April 9, 2017 by mechanicH

linuxgurugamer · April 9, 2017

4 hours ago, mechanicH said:

@eberkain upon further investigation i have found that when i load the vessel and look at the debug console i find it throwing up a Warning [TweakScale Warning] Duplicate TweakScale module on part [SXTProtonlikeNoseCone] Conformal Rocket Cone Mk3...any ideas?

EDIT....i have solved the issue....so this is the line of code that needs to be chaged to make everything back to normal for the nose cone

@PART[SXTProtonlikeNoseCone]:NEEDS[TweakScale] //
{
%MODULE[TweakScale]
{
type = free
}

If you would be so kind as to mend these in your next update i would greatly appreciate it...thank you Sir.

I can understand changing the type from stack to free, but why are you eliminating the defaultScale?

[1.12.x] SXT Continued

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Join the conversation