AlphaMensae Posted July 5, 2021 Author Share Posted July 5, 2021 19 minutes ago, OrbitalManeuvers said: Hello Excited to try this. However, I tried both of the release zip files (dif names) and found the same issue with both: the bundled requirements have changed, but the MLP files themselves are still version 2.1.6? Have I borked something on my end? Aw, crap, I forgot to actually copy over the v2.2 folder into my upload folder before I zipped it up. Correct version is now on Spacedock, called v2.2.0.b, and soon on GitHub Quote Link to comment Share on other sites More sharing options...
HLF1200 Posted July 6, 2021 Share Posted July 6, 2021 (edited) Heyho! I've downloaded version 2.2.0.b, and wanted to launch a new vehicle into Orbit. But I wasn't able to adjust the length of the swing-arms, like it was possible in past versions. Am I getting something wrong here, or is it not a feature anymore? The same also happened with crew-elevators, where you were able to adjust the height. Greetings from Vienna. Edited July 6, 2021 by HLF1200 more info Quote Link to comment Share on other sites More sharing options...
casper808 Posted July 6, 2021 Share Posted July 6, 2021 great job, i spent like 4 hours modifying the starship tower now i have a crew bridge Quote Link to comment Share on other sites More sharing options...
OrbitalManeuvers Posted July 6, 2021 Share Posted July 6, 2021 4 hours ago, HLF1200 said: Heyho! I've downloaded version 2.2.0.b, and wanted to launch a new vehicle into Orbit. But I wasn't able to adjust the length of the swing-arms, like it was possible in past versions. Am I getting something wrong here, or is it not a feature anymore? The same also happened with crew-elevators, where you were able to adjust the height. Greetings from Vienna. I did both of these things this morning with no problems. You might want to double check your install, and/or post a link to your log file so the author can see how you have things installed. Otherwise we're just guessing. Spoiler Quote Link to comment Share on other sites More sharing options...
AlphaMensae Posted July 6, 2021 Author Share Posted July 6, 2021 6 hours ago, HLF1200 said: Heyho! I've downloaded version 2.2.0.b, and wanted to launch a new vehicle into Orbit. But I wasn't able to adjust the length of the swing-arms, like it was possible in past versions. Am I getting something wrong here, or is it not a feature anymore? The same also happened with crew-elevators, where you were able to adjust the height. Greetings from Vienna. You need Staged Animation, it's a hard requirement now, as the .dll contains ModuleAnimateGenericExtra, which replaces all uses of the stock ModuleAnimateGeneric. Quote Link to comment Share on other sites More sharing options...
flart Posted July 6, 2021 Share Posted July 6, 2021 On the ckan the last version is marked as 1.12 only, but looks like it is compatible with the 1.11. Do you planning exclude history launch pads to the separate mod before v3? Quote Link to comment Share on other sites More sharing options...
AlphaMensae Posted July 7, 2021 Author Share Posted July 7, 2021 52 minutes ago, flart said: On the ckan the last version is marked as 1.12 only, but looks like it is compatible with the 1.11. Do you planning exclude history launch pads to the separate mod before v3? It should say 1.8.1 for minimum KSP version now on CKAN. The separating of the historic launch stands was more of an idle thinking moment, and not something that will happen any time soon, if ever. MLP presently isn't too big to warrant separation, and everything is designed to work together anyway. Quote Link to comment Share on other sites More sharing options...
Motokid600 Posted July 9, 2021 Share Posted July 9, 2021 This seemingly happened out of nowhere one day I went to play. The joints that the base parts here use to hold a rocket seem to have changed to rubber bands. My craft will sink then bounce on load and fall over. It is attached however. Just very loosely. What could be going on? Wasnt doing this before and I cant for the life of me think of any changes I made. Quote Link to comment Share on other sites More sharing options...
AlphaMensae Posted July 9, 2021 Author Share Posted July 9, 2021 51 minutes ago, Motokid600 said: This seemingly happened out of nowhere one day I went to play. The joints that the base parts here use to hold a rocket seem to have changed to rubber bands. My craft will sink then bounce on load and fall over. It is attached however. Just very loosely. What could be going on? Wasnt doing this before and I cant for the life of me think of any changes I made. What KSP version is this? If it's 1.12.1, that one is broken in all kinds of ways. In my 1.8.1 dev install, everything is still the same. Quote Link to comment Share on other sites More sharing options...
Motokid600 Posted July 9, 2021 Share Posted July 9, 2021 (edited) 3 hours ago, AlphaMensae said: What KSP version is this? If it's 1.12.1, that one is broken in all kinds of ways. In my 1.8.1 dev install, everything is still the same. 1.11. Sorry shouldve mentioned that. Edited July 9, 2021 by Motokid600 Quote Link to comment Share on other sites More sharing options...
Friznit Posted July 13, 2021 Share Posted July 13, 2021 The launch pads seem to have quite low heat tolerance - they're very explodey when my rockets take off (1.11 install). Is that a new thing or have I just never noticed it before? Quote Link to comment Share on other sites More sharing options...
AlphaMensae Posted July 13, 2021 Author Share Posted July 13, 2021 21 minutes ago, Friznit said: The launch pads seem to have quite low heat tolerance - they're very explodey when my rockets take off (1.11 install). Is that a new thing or have I just never noticed it before? I haven't changed anything related to that. Most parts have the default stock value of whatever I used as the original template. Quote Link to comment Share on other sites More sharing options...
Natokerbal Posted July 14, 2021 Share Posted July 14, 2021 The Saturn Hammerhead Crane doesn't seem to be showing up. Quote Link to comment Share on other sites More sharing options...
AlphaMensae Posted July 14, 2021 Author Share Posted July 14, 2021 35 minutes ago, Natokerbal said: The Saturn Hammerhead Crane doesn't seem to be showing up. It's in the MLP stock custom category, as I somehow forgot to add the CCK tag to it. I always use the stock custom categoery, so never noticed it. Quote Link to comment Share on other sites More sharing options...
Natokerbal Posted July 14, 2021 Share Posted July 14, 2021 4 hours ago, AlphaMensae said: It's in the MLP stock custom category, as I somehow forgot to add the CCK tag to it. I always use the stock custom categoery, so never noticed it. then I'm blind because I can't see it in there lol Quote Link to comment Share on other sites More sharing options...
AlphaMensae Posted July 15, 2021 Author Share Posted July 15, 2021 7 hours ago, Natokerbal said: then I'm blind because I can't see it in there lol Quote Link to comment Share on other sites More sharing options...
Natokerbal Posted July 15, 2021 Share Posted July 15, 2021 ahhh ok thank you I guess I was blind lol Quote Link to comment Share on other sites More sharing options...
OrbitalManeuvers Posted July 15, 2021 Share Posted July 15, 2021 On my machine, KSP's built-in search feature cannot find words in MLP part titles like it can for all other parts. "Crane" does not reveal the crane. I'm not searching for tags, just text in the part titles. Is this fixable? Quote Link to comment Share on other sites More sharing options...
AlphaMensae Posted July 15, 2021 Author Share Posted July 15, 2021 2 minutes ago, OrbitalManeuvers said: On my machine, KSP's built-in search feature cannot find words in MLP part titles like it can for all other parts. "Crane" does not reveal the crane. I'm not searching for tags, just text in the part titles. Is this fixable? The downside of hiding parts from the stock categories is that they can't be searched for either. Delete the Hide_Parts.cfg file in the ModularLaunchPads/Category folder to unhide the parts and make them searchable. Quote Link to comment Share on other sites More sharing options...
OrbitalManeuvers Posted July 16, 2021 Share Posted July 16, 2021 2 hours ago, AlphaMensae said: The downside of hiding parts from the stock categories is that they can't be searched for either. Oh wow, I completely forgot that was a side effect of the parts layout. Well, I'm leaving it as-is ... the tradeoff is totally worth it. I have all the parts' locations memorized anyway Quote Link to comment Share on other sites More sharing options...
biohazard15 Posted July 18, 2021 Share Posted July 18, 2021 A request, if I may: Since general fallback tower is ideal for Atlas-E\F, can we get these sail-like things? I'm not quite sure what these were. Most likely they were some kind of wind protection. Quote Link to comment Share on other sites More sharing options...
Kakub Posted July 31, 2021 Share Posted July 31, 2021 Anyone know how to get rid of this mesh? In the previous version it was not there. Quote Link to comment Share on other sites More sharing options...
Jcking Posted July 31, 2021 Share Posted July 31, 2021 6 minutes ago, Kakub said: Anyone know how to get rid of this mesh? In the previous version it was not there. Switch the hold down arm supports from Saturn V to anything else. Quote Link to comment Share on other sites More sharing options...
Kakub Posted July 31, 2021 Share Posted July 31, 2021 12 minutes ago, Jcking said: Switch the hold down arm supports from Saturn V to anything else. Thank you <3 Quote Link to comment Share on other sites More sharing options...
AlphaMensae Posted July 31, 2021 Author Share Posted July 31, 2021 1 hour ago, Kakub said: Anyone know how to get rid of this mesh? In the previous version it was not there. Yeah, that grating appears for hold-down arm support configurations that don't work with the current exhaust hole shape, like the Saturn V type (4 supports on the sides of a square hole) with any of the rectangular holes. It was a very early attempt at resolving conflicts between hole shapes and support configurations, and will be completely changed with v3...whenever I get around to it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.