Jump to content
  • 19

Center of mass indicator does not get updated when modifying fuel amount values in fuel tanks [or at all until toggling symmetry or picking up craft]


Moredice

Bug Report

Reported Version: v0.1.4 (latest) | Mods: none | Can replicate without mods? Yes 
OS: Windows 10 22H2 (build 19045.3324) | CPU: AMD Ryzen 9 5950X | GPU: Asus ROG Strix GeForce 1080 Ti OC 11gb | RAM32 gb 3200MHz DDR4

 

In the VAB, while "Center of Mass" indication is enabled, the indicator does not move accordingly as fuel amount is being modified in fuel tanks.

 

One needs to disable and enable the CoM indicator again, pick up another part from the part picker (does not need to be attached to the craft) or detach and reattach any part on the craft to update the CoM's position.

 

How to reproduce:

  1. Place two fuel tanks connected with one another.
  2. Enable the "Center of Mass" indicator.
  3. Right click one tank and change its fuel contents to zero.
  4. Observe that the CoM did not move.
  5. Either disable and enable CoM indication again, select a new part from the part picker or detach and reattach one of the fuel tanks.
  6. Observe that the CoM did in fact move.

 

The screenshot illustrates the issue, the video demonstrates the issue, the craft file contains simply the two fuel tanks from step 1.

 

Included Attachments:

20230904001830_1.jpg.8609b0e132d21005d59a96874cfd6155.jpg

Window04-09-202300-20-22.mp4

fuel_tanks.json

Edited by Anth12
Link to comment
Share on other sites

16 answers to this question

Recommended Posts

  • 0

Reported Version: v0.1.4 (latest) | Mods: none | Can replicate without mods? Yes 
OS: Win 11 | CPU: ryzen9 7950X | GPU: RTX 4080 16GB | RAMDDR5

Description:
As per the title: Center of Mass widget does not update until you toggle it off and on.

Edited by Anth12
Link to comment
Share on other sites

  • 0
6 minutes ago, Anth12 said:

Changed the title to add the toggle aspect

I took  Spaceman42069's:

"Center of Mass widget does not update until you toggle it off and on"

to mean the same as Moredice's:

"5. Either disable and enable CoM indication again..."?

But I am dyslexic as **** so I could be wrong about that.

Link to comment
Share on other sites

  • 0

Reported Version: v0.1.5 (latest) | Mods: none | Can replicate without mods? Yes 
OS: Windows 10 | CPU: Intel(R) Core(TM) i5-9600K | GPU: NVIDIA RTX3080 | RAM16 GB

 

In an airplane configuration, where fuel tanks are stacked horizontally I would expect the Center of Gravity marker to move forward or backwards if the contents of one of the tanks is changed.

Example:

  1. Load the default "Aeris-K2" airplane:  it has 2 JF-200 methane tanks, with each 2 tons of fuel in them.
  2. Open the engineering report: the plane has a total mass of 7.7 tons, and a dry mass of 3.57
  3. Enable the COG marker: notice how it lies somewhere in the front tank.
  4. Change the contents of the rear tank from 2 tons to zero, in the engineering report the total mass is immediately updated to 5.7 tons (which seems correct)
  5. Notice however that the COG marker doesn't move at all, while it should definitely move forward:
    1. These 2 tons are a significant part of the total mass of this plane
    2. The removed mass lies at a significant distance behind the original COG.

Turning the COG marker off and on again updates the marker position to what seems to be the correct location.

Edited by The Space Peacock
Link to comment
Share on other sites

  • 0

Reported Version: v0.2.0 (latest) | Mods: none | Can replicate without mods? Yes 
OS: Windows 10 | CPU: AMD Phenom(tm) II X6 1055T Processor 2.80 GHz | GPU: NVIDIA GeForce RTX 2070 SUPER | RAM24.0 GB

 

1. Center of mass marker turned on for a rocket stage.

QNOSraq.jpg

2. Drain/change fuel values for that stage using the part manager. The center of mass marker doesn't move to the proper location on its own as you do that.

jP9q9ec.jpg

3. To get the center of mass to take on its proper location again, you have to click its button twice to make it disappear and reappear in the new location.

J7UfhOf.jpg

em22LHQ.jpg

 

Included Attachments:

Edited by Spicat
Link to comment
Share on other sites

  • 0

Reported Version: v0.2.0 (latest) | Mods: none | Can replicate without mods? Yes 
OS: Windows 11 | CPU: AMD Ryzen 5 7600X | GPU: NVIDIA GeForce RTX 2060 | RAM32 GB

Severity: low

Frequency: high

Description:  In the VAB when changing the amount of fuel in a tank the Center of Mass Marker doesn’t move. Workaround: Turn the marker off and on again.

Included Attachments:

Recording2024-01-07190645.mp4

Link to comment
Share on other sites

  • 0

Reported Version: v0.2.1 (latest) | Mods: multiple | Can replicate without mods? Yes 
OS: Win 11 | CPU: i7-9700K | GPU: GTX 1050 Ti | RAM16 GB

In VAB, when first enabling CoM and then changing fuel levels in one or more tanks, the CoM doesn't update to reflect the changed fuel levels. (It updates properly if CoM is disabled and then re-enabled)

Included Attachments:

CoMdosntupdate.mp4

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...