astrobond Posted January 16 Share Posted January 16 Hi All, That was the last mission i had to do, that was hard, that was fun, i need other missions to do now !!! No cheats, Stock game, I made a less than 3000 Tons Ship for all the mission in one go, a 205 Tons Lander (with the weight 10 Kerbals included) to go back to Orbit . Here are the pictures of the journey The Full Ship, just under 3000 Tons... Heat Shields to 50% ablating and the bottom ones slightly pushed to side to protect landing gears, Landing gears to minimum springs and dampening, one Kerbal in the MK1 and 6+3 in the cargo bay. 204.73 Tons when ready to go back in Orbit. A good TWR is really important... Launch !!! Orbit 1041 dv to Eve Encounter. Dv of aspargus stages is not really... good, but the dv for interplanetary stage was ok ! I made some one minute burns at eve PE. First Eve insertion burn. Now in a nice orbit After undocking of the interplanetary ship, it's time to make the de-orbit burn... It's hot, but Ok ! About 3000m, no more need of the top Shields... When the chutes are opened, we can free the bottom shields. Almost landed, 9.5m/s is ok for the landing gears Selfie of the 10 Kerbals on Eve !!! Back in the lander, 506m above sea level... We have to be as light as possible, so... Lets GO !!! Yessss Back in Orbit !!! Everybody is OK The interplanetary ship is going to rescue our Kerbals... Almost docked Time to go back to Kerbin ! Hopefully we have enough dv xD Should be good... Hello Kerbin ! Bye bye mother ship... Oh the Mun is still here too ! 7.5 m/s, fine Yesssss Mission OK !!! Fly safe !!! Quote Link to comment Share on other sites More sharing options...
Xacktar Posted January 22 Share Posted January 22 Massively Impressive! The ship looks amazingly cool in the after-launch orbit. Quote Link to comment Share on other sites More sharing options...
astrobond Posted January 22 Author Share Posted January 22 7 hours ago, Xacktar said: Massively Impressive! The ship looks amazingly cool in the after-launch orbit. Thank you @Xacktar Quote Link to comment Share on other sites More sharing options...
Mikki Posted January 23 Share Posted January 23 (edited) @ww1612 and you, @astrobond have beaten the game, congratulations! Impressive mission report and a heads-up for all of us who struggle with Eve`s attraction Edited January 23 by Mikki typo Quote Link to comment Share on other sites More sharing options...
astrobond Posted January 23 Author Share Posted January 23 (edited) 2 hours ago, Mikki said: @ww1612 and you, @astrobond have beaten the game, congratulations! Impressive mission report and a heads-up for all of us who struggle with Eve`s attraction Thank you @Mikki Hope this help ! Edited January 23 by astrobond Quote Link to comment Share on other sites More sharing options...
magnemoe Posted February 2 Share Posted February 2 Impressive, but was they in tourist class the entire trip? Quote Link to comment Share on other sites More sharing options...
astrobond Posted February 2 Author Share Posted February 2 1 hour ago, magnemoe said: Impressive, but was they in tourist class the entire trip? Lol, there was a lot of snacks in the cargo bay, but i think the trip was not really in tourist class Quote Link to comment Share on other sites More sharing options...
Kirian Posted February 19 Share Posted February 19 Very Cool! Are you willing to share your ship plans? Quote Link to comment Share on other sites More sharing options...
astrobond Posted February 20 Author Share Posted February 20 (edited) 19 hours ago, Kirian said: Very Cool! Are you willing to share your ship plans? Thank You @Kirian Sorry i only have the last version of the ship i used for the KSP2 0.2.1.0 Version Mission with Tier3 parts... This "Light" Lander version is OK to reach orbit from 1000m ASL on Eve, but this is a little hard xD Here is the link to the ship file: https://drive.google.com/file/d/1V9-Hbk8ITy-YMY5pXXL0V4WcOoVWDvtK/view?usp=sharing Best Regards, Astrobond Edit: I made a new more friendly ship for this mission... a little heavier, but still with Tier 3 parts, ready to go orbit from Eve Sea Level, and more easy to land (if the landing legs are not set at spring 0.10 and damper 2.00, go with those values to land without exploding ) the new ship: https://drive.google.com/file/d/1un-csNs5l-xpeWmXZHc7yF6gBozZet9S/view?usp=sharing Edited February 20 by astrobond Quote Link to comment Share on other sites More sharing options...
Kirian Posted February 21 Share Posted February 21 20 hours ago, astrobond said: I made a new more friendly ship for this mission... a little heavier, but still with Tier 3 parts, ready to go orbit from Eve Sea Level, and more easy to land OK, I'm really surprised you did this with T3 parts. Your vessel shown earlier has T4 parts of course, so very cool getting it down to smaller parts! Quote Link to comment Share on other sites More sharing options...
Kirian Posted February 26 Share Posted February 26 Alas, the T3 build didn't actually quite make it down to the surface; at least, my copy of it didn't. The trusses holding the upper-level heat shields started to overheat; on my first shot, one of them blasted away, pulling everything else off-balance. Second try, I released the four together before one overheated... but then the combo of no balance from those and very slow SAS (due to the build) meant the lander couldn't stay in retrograde long enough, and broke apart. Additionally, the interplanetary stage requires high precision... I had to accept a somewhat high PE on arrival, and getting it down close enough to the planet meant it no longer has enough dV to return to Kerbin. So it goes... I'll try sending my normal two-launch combo this time to rescue the Kerbals--at least they'll travel home in style, even if it does take a while for rescue ships to arrive. Quote Link to comment Share on other sites More sharing options...
astrobond Posted February 26 Author Share Posted February 26 40 minutes ago, Kirian said: Alas, the T3 build didn't actually quite make it down to the surface; at least, my copy of it didn't. The trusses holding the upper-level heat shields started to overheat; on my first shot, one of them blasted away, pulling everything else off-balance. Second try, I released the four together before one overheated... but then the combo of no balance from those and very slow SAS (due to the build) meant the lander couldn't stay in retrograde long enough, and broke apart. Additionally, the interplanetary stage requires high precision... I had to accept a somewhat high PE on arrival, and getting it down close enough to the planet meant it no longer has enough dV to return to Kerbin. So it goes... I'll try sending my normal two-launch combo this time to rescue the Kerbals--at least they'll travel home in style, even if it does take a while for rescue ships to arrive. Hi @Kirian Sorry for that... maybe some "tuned" parts are not in the copy ? You have to set the shields to 50% ablating material (to save weight) , and the landing legs to 0.1 spring and 2 Damper for a better landing. If some parts become hot, try to rotate the ship while aerobraking, that helped me a lot ( and of course save the game while in orbit before trying.... some times it goes wrong for me too ) My landing was done from a 110km orbit, lowering the PE to around 60km. Hope this help Quote Link to comment Share on other sites More sharing options...
Kirian Posted February 27 Share Posted February 27 (edited) 4 hours ago, astrobond said: maybe some "tuned" parts are not in the copy ? If some parts become hot, try to rotate the ship while aerobraking, that helped me a lot ( and of course save the game while in orbit before trying.... some times it goes wrong for me too ) No, the tuning was there in the copy But I will try one more landing with rotation while I aerobrake. I'm coming from about 100 km with a PE of about 70 km. Edit: Roll during descent worked!! Touchdown and back into orbit achieved! Thanks again. Edited February 27 by Kirian Quote Link to comment Share on other sites More sharing options...
astrobond Posted February 27 Author Share Posted February 27 10 hours ago, Kirian said: Additionally, the interplanetary stage requires high precision... I had to accept a somewhat high PE on arrival, and getting it down close enough to the planet meant it no longer has enough dV to return to Kerbin. So it goes... I'll try sending my normal two-launch combo this time to rescue the Kerbals--at least they'll travel home in style, even if it does take a while for rescue ships to arrive. @Kirian I forgot to say that when you go back to the mothership and dock, the dV is far better than before you undock the lander, because the weight of the capsule with the 10 Kerbals is light ! so you should have enough dV to go back Kerbin Quote Link to comment Share on other sites More sharing options...
ralanboyle Posted March 1 Share Posted March 1 I'll go ahead and pile on with my own "Under Pressure" mission report. My decent stage ended up looking pretty similar since I also used drag petals! The biggest hardship was keeping my part count low enough to stave off the kraken. I got away with only a few glitches. Quote Link to comment Share on other sites More sharing options...
CFTeague2 Posted March 5 Share Posted March 5 excellent job!! But now, im trying to figure out, what the upper heat shields are attached to? (the ones for the desenct to eve surface, above the rocket) It kind of looks like they are attached to solar panels, but that cant possibly be strong enough, right??? Thanks! Quote Link to comment Share on other sites More sharing options...
astrobond Posted March 5 Author Share Posted March 5 3 hours ago, CFTeague2 said: excellent job!! But now, im trying to figure out, what the upper heat shields are attached to? (the ones for the desenct to eve surface, above the rocket) It kind of looks like they are attached to solar panels, but that cant possibly be strong enough, right??? Thanks! Hi @CFTeague2 and Thank you The Upper heat shields can be attached to Radials Decouplers (TT-38K) using xs long struss (ST-XS-4) or Tubes (TOOB-000) for better temperature resist but harder to use in VAB. In the first version of my ship i used small panels (SP-S06), but that was not as good as the other ones (too much parts, weight and can overheat) Hope this help Quote Link to comment Share on other sites More sharing options...
ralanboyle Posted March 5 Share Posted March 5 7 hours ago, CFTeague2 said: what the upper heat shields are attached to? @astrobond is correct. I used small radial decouplers attached to the fuel tank. Then long strusses. At the end I attached the heat shields and rotated them. I placed them at a point where the strusses would be protected by the lower heat shields and angled them so that the drag they create would increase positive stability in the craft, just like dihedral on an airplane. Quote Link to comment Share on other sites More sharing options...
Destinesta Posted March 10 Share Posted March 10 I did this whole mission but did not get credit. Is there something specific you need to do. I was very sad, spent since Jan working on it and didn't get credit when I pulled it off. Quote Link to comment Share on other sites More sharing options...
astrobond Posted March 11 Author Share Posted March 11 4 hours ago, Destinesta said: I did this whole mission but did not get credit. Is there something specific you need to do. I was very sad, spent since Jan working on it and didn't get credit when I pulled it off. Hi @Destinesta, yes there is a bug in this mission, sometimes you do not get the credits, happened to me too If you saved your game while back in orbit around Eve, you can try to reload from that file and go back to Kerbin, or you can use the cheat menu to teleport your ship from Eve Orbit to Kerbin surface to end the mission with rewards Quote Link to comment Share on other sites More sharing options...
Destinesta Posted March 11 Share Posted March 11 @astrobond Thank you! I think me using a different vehicle to retrieve my little ship that what remained after the ascent back up made it a different ship. Thanks for the ideas! I know I did it, Ill get the complete through methods.... Quote Link to comment Share on other sites More sharing options...
brispo Posted April 5 Share Posted April 5 On 3/11/2024 at 5:41 AM, Destinesta said: @astrobond Thank you! I think me using a different vehicle to retrieve my little ship that what remained after the ascent back up made it a different ship. Thanks for the ideas! I know I did it, Ill get the complete through methods.... Did you ever figure this out definitively? We're not supposed to launch from Eve surface to orbit, then make the entire trip back to Kerbin without a pusher ship, right? That would require an impossibly huge rocket... I just completed this mission yesterday, and didn't get credit for it too. I'm thinking it could be one of two things. 1) My ship didn't have any bone-fide command pods in it. All ten kerbals were in rover chairs. Maybe the game doesn't could that as a 'vessel'? or 2) I realized after I got my ship back into orbit, that I used different size docking ports on my lander and my interplanetary pusher, so I had to build a new pusher ship and fly it out to Eve to pick up my Kerbals. Maybe using a ship that was launched after the Kerbals were launched caused the game to see it as 'not the same ship'? Regardless, I hope the devs sort this out eventually, because it's pretty frustrating to spend three weeks designing a ship for this mission, only to have it glitch out and not mark as 'complete'. Quote Link to comment Share on other sites More sharing options...
astrobond Posted April 5 Author Share Posted April 5 1 hour ago, brispo said: Did you ever figure this out definitively? We're not supposed to launch from Eve surface to orbit, then make the entire trip back to Kerbin without a pusher ship, right? That would require an impossibly huge rocket... I just completed this mission yesterday, and didn't get credit for it too. I'm thinking it could be one of two things. 1) My ship didn't have any bone-fide command pods in it. All ten kerbals were in rover chairs. Maybe the game doesn't could that as a 'vessel'? or 2) I realized after I got my ship back into orbit, that I used different size docking ports on my lander and my interplanetary pusher, so I had to build a new pusher ship and fly it out to Eve to pick up my Kerbals. Maybe using a ship that was launched after the Kerbals were launched caused the game to see it as 'not the same ship'? Regardless, I hope the devs sort this out eventually, because it's pretty frustrating to spend three weeks designing a ship for this mission, only to have it glitch out and not mark as 'complete'. If you have a saved game while back in Eve Orbit, you can use the cheat menu (alt F12) to teleport your ship with the ten Kerbals on the rover chairs on the surface of Kerbin just to see if the mission is 'complete' Quote Link to comment Share on other sites More sharing options...
brispo Posted April 11 Share Posted April 11 On 4/5/2024 at 10:54 AM, astrobond said: If you have a saved game while back in Eve Orbit, you can use the cheat menu (alt F12) to teleport your ship with the ten Kerbals on the rover chairs on the surface of Kerbin just to see if the mission is 'complete' ALT+F12 isn't doing anything for me. Quote Link to comment Share on other sites More sharing options...
astrobond Posted April 11 Author Share Posted April 11 30 minutes ago, brispo said: ALT+F12 isn't doing anything for me. Yes sometimes ALT+F12 is used by another program on the computer (Nvidia for example)... In this case you have to change the binding key in the Settings-Inputs menu of KSP2 (section GLOBAL, ToggleCheat Menu). Hope this help Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.