Alexander 012 Posted November 20, 2013 Share Posted November 20, 2013 Im having trouble unpacking the mod, archive says that it is corupted and damaged, anyone else having this problem? Link to comment Share on other sites More sharing options...
TeeGee Posted November 21, 2013 Share Posted November 21, 2013 What's going on with the landing gear? I can't even get my plane off the runway without exploding due to gear bending, twisting or flipping my plane well before takeoff. I've tried every position I know and always end up with a crash. Link to comment Share on other sites More sharing options...
Fido488 Posted November 21, 2013 Share Posted November 21, 2013 SNM Struts? Bondage for our rockets? I hope the joke was intentional. Link to comment Share on other sites More sharing options...
mach1 Posted November 21, 2013 Share Posted November 21, 2013 how much ram does this mod use? i've tried it yesterday, i've also used reduced texture size and still the mod uses about 1gb of ram. I usually run on 2.6 gb 2.7gb ksp.exe usage, with this mod installed i jumped over the critical 3.7gb and got a lot of crashes. any suggestion? Link to comment Share on other sites More sharing options...
sarbian Posted November 21, 2013 Share Posted November 21, 2013 You could have a look at this : http://forum.kerbalspaceprogram.com/threads/59005-0-22-Release-1-Active-Memory-Reduction-Mod Link to comment Share on other sites More sharing options...
Hodo Posted November 21, 2013 Share Posted November 21, 2013 What's going on with the landing gear? I can't even get my plane off the runway without exploding due to gear bending, twisting or flipping my plane well before takeoff. I've tried every position I know and always end up with a crash.I had a problem like this also for a while. I found that I was not attaching the gear to a stable enough surface. I also started using this mod.http://forum.kerbalspaceprogram.com/threads/55657-0-22-Kerbal-Joint-Reinforcement-v1-4-2-Properly-Rigid-Part-ConnectionsKerbal Joint Reinforcement, is worth it trust me. I have been able to cut down on the numbers of struts and part counts by a fair amount. Link to comment Share on other sites More sharing options...
Downfeather6 Posted November 21, 2013 Share Posted November 21, 2013 All of the my parts have have a strange color issue and they crash the game in the SPH. I tried re-downloading the mod but it didn't work. Does anyone know how to fix this?Otherwise GREAT MOD! Link to comment Share on other sites More sharing options...
Downfeather6 Posted November 21, 2013 Share Posted November 21, 2013 (edited) Never mind, the problem was the half-res textures. Edited November 22, 2013 by Downfeather6 Link to comment Share on other sites More sharing options...
McKerbin McDerbin Posted November 22, 2013 Share Posted November 22, 2013 Anyone else having issues with this pack on mac? Link to comment Share on other sites More sharing options...
Mr. Entropy Posted November 22, 2013 Share Posted November 22, 2013 Is the linked file on Spaceport a complete download? I'm only getting 86 part files in the download's folder. None of the prebuilt craft work due to a lot of missing parts. Link to comment Share on other sites More sharing options...
lunaticPhD Posted November 22, 2013 Share Posted November 22, 2013 Every time I try to open the archive I get this message..."! C:\Documents and Settings\kenny\My Documents\Downloads\uploads-2013-10-B9-Aerospace-Pack-R4-0c (1).zip: Unexpected end of archive"Then when I try to extract the archive I get this message..."! C:\Documents and Settings\kenny\My Documents\Downloads\uploads-2013-10-B9-Aerospace-Pack-R4-0c (1).zip: The archive is either in unknown format or damaged"What do I do?P.S. I'm using Winrar. Link to comment Share on other sites More sharing options...
lunaticPhD Posted November 22, 2013 Share Posted November 22, 2013 Every time i download the mod then enter the archive I get this message"! C:\Documents and Settings\kenny\My Documents\Downloads\uploads-2013-10-B9-Aerospace-Pack-R4-0c (1).zip: Unexpected end of archive"then, when I attempt to extract the archive i get this message"! C:\Documents and Settings\kenny\My Documents\Downloads\uploads-2013-10-B9-Aerospace-Pack-R4-0c (1).zip: The archive is either in unknown format or damaged"What do I do to resolve this issue?I'm using Winrar btw. Link to comment Share on other sites More sharing options...
Railgunner2160 Posted November 23, 2013 Share Posted November 23, 2013 Check the intended size of the archive, with the size of the archive you have. 10 to 1 the download cut off part way through..... Link to comment Share on other sites More sharing options...
DaMichel Posted November 23, 2013 Share Posted November 23, 2013 What's going on with the landing gear? I can't even get my plane off the runway without exploding due to gear bending, twisting or flipping my plane well before takeoff. I've tried every position I know and always end up with a crash.I have the same issue lately (with the reinforced connections mod + FAR + some others). The stock landing gear seems to work fine. I'm sure that it is some sort of addon incompatibility issue since it appeared after updating some addons. Before that i could usually take off if i was careful enough. Now the friction seems to stick the gear to the ground, almost impossible to move. Was too lazy to investigate though Link to comment Share on other sites More sharing options...
Qualm Posted November 23, 2013 Share Posted November 23, 2013 I have the same issue lately (with the reinforced connections mod + FAR + some others). The stock landing gear seems to work fine. I'm sure that it is some sort of addon incompatibility issue since it appeared after updating some addons. Before that i could usually take off if i was careful enough. Now the friction seems to stick the gear to the ground, almost impossible to move. Was too lazy to investigate though I had the same problem with FAR, I reinstalled B9 after FAR and the sticky landing gear issue is gone Link to comment Share on other sites More sharing options...
somnambulist Posted November 23, 2013 Share Posted November 23, 2013 Anyone else having issues with this pack on mac?By problems you mean graphic corruption? Try using the lower-res textures in the pack. Link to comment Share on other sites More sharing options...
lunaticPhD Posted November 24, 2013 Share Posted November 24, 2013 B9 is causing my game to crash while in the load screen every time the game is loading squad/spaces/podcockpit/internalwhat's up with this and how do I fix it? Link to comment Share on other sites More sharing options...
Jackt143 Posted November 24, 2013 Share Posted November 24, 2013 Hi this looks amazing but every time i go to download it ,the download button takes me to a page that says this file does not exist ,i don't know what to do please help if you can ! Link to comment Share on other sites More sharing options...
Manifest Posted November 24, 2013 Share Posted November 24, 2013 If it says squad/, then I'm pretty sure it's one of the vanilla files. Link to comment Share on other sites More sharing options...
night81 Posted November 24, 2013 Share Posted November 24, 2013 It crashed when using the full version so I installed the reduced textures exactly as specified. I merged the B9_Aerospace (reduced_textures) with the B9_Aerospace (full textures) folder and selected replace all. Now when KSP starts none of the B9 Aerospace parts are shown in the VAB. They did show up a few times when using the full texture version, before it crashed. Link to comment Share on other sites More sharing options...
semyonanonov Posted November 24, 2013 Share Posted November 24, 2013 Bac9, can you make the Goo Container and Material Bay in your Radial Science Stuff style? Link to comment Share on other sites More sharing options...
Darkeldar Posted November 24, 2013 Share Posted November 24, 2013 DaMichel Quote Originally Posted by TeeGee View Post What's going on with the landing gear? I can't even get my plane off the runway without exploding due to gear bending, twisting or flipping my plane well before takeoff. I've tried every position I know and always end up with a crash.I have the same issue lately (with the reinforced connections mod + FAR + some others). The stock landing gear seems to work fine. I'm sure that it is some sort of addon incompatibility issue since it appeared after updating some addons. Before that i could usually take off if i was careful enough. Now the friction seems to stick the gear to the ground, almost impossible to move. Was too lazy to investigate though Seems I'm not the only one with issues with B9 landing gear. Actually saw the front landing gear slide back on the Mk2 component I had it attached to, then it stutters till the plane reaches just over 30 m/s, when said landing gear pogos the nose up before I have enough airspeed to takeoff, then slamming the nose down on the runway. I'm going to try un-installing FAR to see if it fixes the issue for me. Link to comment Share on other sites More sharing options...
lunaticPhD Posted November 24, 2013 Share Posted November 24, 2013 what up with the landing gear? stock gears work fine but when I attempt to use any of the b9 gears it's like the plane gets glued to the runway. Link to comment Share on other sites More sharing options...
Darkeldar Posted November 24, 2013 Share Posted November 24, 2013 Seems I'm not the only one with issues with B9 landing gear. Actually saw the front landing gear slide back on the Mk2 component I had it attached to, then it stutters till the plane reaches just over 30 m/s, when said landing gear pogos the nose up before I have enough airspeed to takeoff, then slamming the nose down on the runway. I'm going to try un-installing FAR to see if it fixes the issue for me.Well FAR's not the issue... Link to comment Share on other sites More sharing options...
Tharios Posted November 25, 2013 Share Posted November 25, 2013 Seems like there are several issues that are turning out to be pretty common with the mod. I wonder what happened... Link to comment Share on other sites More sharing options...
Recommended Posts