Jump to content

Imperial versus metric


Camacha

Recommended Posts

  On 1/4/2014 at 3:00 PM, SargeRho said:

The system that makes the most sense is DD/MM/YYYY, since days change the most often, then months, then years.

Expand  

Oh well, since this thread has already been resurrected, I may as well throw in my two ha'pennies ;)

So when telling time, you give seconds-minutes-hours too?

 

Again, as others have mentioned, what people say the date as compared to how it should be written down are two completely separate things. All written date / time should go from largest to smallest, as we do with all the rest of our numbers too.

Interesting semi-related factoid : the reason we write numbers effectively from right-to-left ("little-endian" in computer parlance) is because we imported the arab numbering system - which is a right-to-left written language. But then we (mostly, depending on your language * ) say numbers left-to-write since that's how we read them.  

* In german, for example, it's a real mixed bag.  23 is said three-and-twenty (dreiundzwanzig). Which is right-to-left.  123 is one-hundred-three-and-twenty!! 

Reflecting on it, fron an "intuition" perspective it makes a lot of sense to start with the largest first - that gives you a scale to work with.  If you always start with the smallest value you have to wait until you have the whole number before you get the scale. one-and-twenty-and-three hundred-and-four thousand-and five-ten-thousands-and,..... 

Which brings us back to the yyyy-mm-dd date system ;) 

 

 

Link to comment
Share on other sites

  On 12/30/2013 at 2:01 AM, Camacha said:

First of all, I am not out to start a flamewar and this topic should not end up being one. I understand different people do things differently. It will always be like that and we should accept that.

I am very much used to the metric system. Most people will be aware that this is very structured, making conversions easier. For fun, I started doing problems in imperial units. Even though I have some idea of what each one should roughly indicate (inches from construction shows, feet from feet, yards from watching football and miles from car shows) I find it utterly impossible to work with the system in a somewhat intuitive and efficient manner. I understand that it is very much a matter of what you are used to, but I can truly not imagine anyone would want to work with something like that voluntarily. I found myself seriously wondering whether this does not regularly lead to conversion problems and all sorts of mistakes and construction problems. I can imagine that processing units in computer systems can be a bit of a hassle too. However, I am simply not used to the system, so maybe all this is not a problem at all.

I thought it might be interesting to share what your experiences with the different systems are :) I am very curious about the implications of day to day use to the imperial system. Any good stories about the origin or implementation of the systems are welcome too.

full.png

Expand  

Approaching this from 8 years after this was posted - I'm still compelled to answer.

I grew up used to the American system (I could not possibly tell you a man's weight in Stone - but some Brit friends can).  I can also talk confidently in meters and kilometers - thanks to my time in the military.  So much so that it's almost natural - native language... you could say I am fluent in meters and klicks.  But when it comes to millimeters and centimeters I am somewhat still 'translating' - I 'know' how big 5.56 is, just as I know how wide 120mm is - because they are rounds I have used.  But if you tell me something is 7cm... I have to translate that.

The key for me - in knowing meters and klicks is by having stared at, measured, counted and walked in those terms.  For years and years I lived, talked and operated in those - and I talk in those to other military folks.

I don't drive in klicks, however.  I drive in miles.  I bike in miles - but I can walk, even run in klicks.  I can shoot in meters, even range in meters.  But I cannot, for the life of me, drive in meters or kilometers.  At least not in a civilian car, on a road.  I certainly can in a tank across the desert.  I've done that.

Don't get me started on anything other than liters.  I know about how big a liter is.  I regularly carry one on my back.  I cannot tell you whether a glass is a deciliter or some number of milliliters... it just has no meaning.  Cup, pint, quart, gallon - I know them all.  I can guestimate the conversion from pounds to kilos (about half) - but if you asked me how much a man weighs - I'll say he's about a buck-eighty... never ninety.

Fuggitabout it with degrees of centigrade: that's just too pat.  Water boils at 212 degrees.  117 is bloody hot outside.  50?  You need a jacket.  Ask my friend in France what he wears when it's 50, and he starts talking about Global Warming.

I have a sneaky suspicion that the metric system is 'too made up'.  - speed of sound is close to 300m/s.  Speed of light is close to 300,000 km/s  --- waaaay too convenient.  Someone is cheating.  186,000 miles per second makes sense to me.  Counting to 5 for every mile between the flash and bang of lightning tells me how far away the storm is... but I can also count three seconds from the flash of a tank firing and the boom and know its almost a klick away.

All of this is to say - these units of measurement are like a language.  You can learn it, but only translate it to what you know... until you live it.

Only then does any made up system of measurement become real.  

Only by living it - will we ever be fluent in it.

Edited by JoeSchmuckatelli
Link to comment
Share on other sites

On the lighting flash start counting seconds "21... 22..." and divide by 3 the thunder time., It's in kilometers.

Water boils at 100, freezes at 0, it's very obvious.
Normal body temp is 36.6. Standard office conditioner 22. Cool water is 18..20. Fridge is 4.
-15 is a normal winter temperature in Moscow, and it's too cold for me.

Standard glasses are 180 and 200 grams or milliliters.
Standard vodka bottle 0.5 l. Champagne 0.75. Pepsi glass bottle 0.25 l (and it's strange because since the Soviet times it was 0.33).

Light is about 300 thousand km/s, much more handy than 186 in miles.

Btw, which miles? 1852 or 1609?
If a sailor drives a car, which miles should he use? His miles or these miles? The 1.15 ratio looks weird.

***

The British system could make sense if people were using 12-base numeric system (more handy, of course), but they usually use 10.

But even then it's full of non-standard units, so the metric one is more handy.

Metric is for fiction, Imperial is for fantasy.

Link to comment
Share on other sites

Its all made up stuff anyway.  As long as enough people agree on the rules, the game is fair.

Think about using watches, clocks and calendars on a planet that rotates once every 27 hours and takes 15.3 months to circle its star. 

A second is a heartbeat, right?  Totally subjective.

 

Eddie: what time is it?

 

Edited by JoeSchmuckatelli
Link to comment
Share on other sites

  On 6/18/2021 at 5:55 AM, JoeSchmuckatelli said:

A second is a heartbeat, right?

Expand  

1/60 th of 1/60 th of 1/24 th, as the Sumerian gods set it.

They would better make it 1/72 th of 1/72 th of 1/24 th. Still more useful.

Also the Ancient Hebrew time units differ.
https://en.wikipedia.org/wiki/Biblical_and_Talmudic_units_of_measurement#Day

  Quote
  • 1 part (heleq) = 76 moments (rega'im) (each moment, rega, is 0.04386 of a second; 22.8 rega'im is 1 second)
  • 1 hour (sha'ah) = 1080 parts (halaqim) (each heleq is 3⅓ seconds)
  • 1 day = 24 hours (sha'ah)
Expand  

Still wondering, how did they measure 3600/(1080 * 76) = 0.04 second intervals.
It's comparable to the CPU clock generator. Makes to start thinking about the stone-and-clay computers.

Link to comment
Share on other sites

  On 6/17/2021 at 8:29 PM, RCgothic said:

if all knowledge of the Imperial system were burnt in a fire nothing of value would be lost.

Expand  

Looks over at us referring to U.S. standards and their official version is in imperial, and there are typos in the metric version and we carried over the typos leading to illogical results

  On 6/17/2021 at 9:36 PM, StrandedonEarth said:

An acre is the area of a rectangle whose length is one furlong and whose width is one chain.

Expand  

Would've made sense when measuring chains are all you have ! (railway mileage used to be done in chain-miles in the UK, they now technically still do that but many design documents use metric)

Also still more sensible than using ft for railway mileage like in the US, even more so in design documents... like seriously it's waay too small for the scale of stuff you're working...

  On 6/18/2021 at 2:26 AM, micha said:

So when telling time, you give seconds-minutes-hours too?

Again, as others have mentioned, what people say the date as compared to how it should be written down are two completely separate things. All written date / time should go from largest to smallest, as we do with all the rest of our numbers too.

Expand  

I will say, I've always used DD/MM/YYYY nearly all my life (all 19 years ever since I properly understand stuff) since that's how we would explain it in words, but after learning languages where they naturally do things YY年MM月DD日 that alternative makes sense too.

  On 6/18/2021 at 4:38 AM, kerbiloid said:

The British system could make sense if people were using 12-base numeric system (more handy, of course), but they usually use 10.

Expand  

There was actually a proposal to use base 12 numbers.

Edited by YNM
Link to comment
Share on other sites

There is no problem with finger-counting of  base 12

  Reveal hidden contents


And see what true professionals were able to do with base 10.

  Reveal hidden contents


I believe that using a double-base system would be the best (6 an12 as double-6), but it's hard to do this on my own, when everything around is base 10.

Link to comment
Share on other sites

  On 6/18/2021 at 2:26 AM, micha said:

Oh well, since this thread has already been resurrected, I may as well throw in my two ha'pennies ;)

So when telling time, you give seconds-minutes-hours too?

Expand  

No, it may as well be YYYY/MM/DD, whether it's left-to-right or right-to-left doesn't really matter to me.

What really scrambles my neurons, is YYYY/DD/MM, or MM/DD/YYYY

Link to comment
Share on other sites

From MS SQL Server dox.

  Reveal hidden contents

 

Link to comment
Share on other sites

On the whole idea of "base 10 vs base 12 or base 60" (the base 60 system that time and circles still use dates back to Babylon)...

Sometime around 2000 the New York  Stock Exchange went from stocks having their traditional fractions to going decimal.  I suspect IBM was behind it, because they're the only computer company that really includes a "base 10 mode" (Intel has one, but it is so limited it appears to be included as "checkbox engineering").  The fractions NYSE used were all naturally base-2, and were as easy for a computer to do the calculations as any old timer could.  Simply define the "decimal point" three bits to the right and your 16 bit word (expect to special case Berkshire Hathaway, or just use 64 bits for everything) now deals with integer values of 1-8192 and fractions 1/8 to 7/8.

Lets just say anyone who thought decimalization made things easier for computers doesn't get the "10 types of people" joke.  Probably including far too many modern programmers.

  On 6/18/2021 at 12:11 AM, NFUN said:

Every single Mech E major I knew would convert the imperial units they were given in problems to metric to do the work and would convert them back at the end, even though they were mostly American and they were taught in Imperial in most classes since the beginning of school

 

Just say no.

Expand  

My first job was at a startup working under a French engineer who would often argue with the American fabricator/technician about "sillymeters" (I was also told that "soccer" was pronounced "foitball" and football was pronounced "football" (emphasis more on the long oo than the t)).  The Frenchman once mentioned that he didn't have much of a problem working with Imperial units as he would convert everything to metric and convert the final answer back.  The tech admitted that he did it that way, and so did everybody else.

Link to comment
Share on other sites

  On 6/18/2021 at 4:19 PM, wumpus said:

My first job was at a startup working under a French engineer who would often argue with the American fabricator/technician about "sillymeters" (I was also told that "soccer" was pronounced "foitball" and football was pronounced "football" (emphasis more on the long oo than the t)).  The Frenchman once mentioned that he didn't have much of a problem working with Imperial units as he would convert everything to metric and convert the final answer back.  The tech admitted that he did it that way, and so did everybody else.

Expand  

These are mainly old-timey engineering stories. Nowadays everybody uses software that will automatically calculate any units you want, so it doesn't really matter.

Link to comment
Share on other sites

  On 6/18/2021 at 7:26 PM, kerbiloid said:

"/" ?

Expand  

Yeah, using "/" is not a great idea for file names.

"\" is not good either.

Nor is "." or "?" or "*" or "[" or "]" or ... well, suffice to say there are a lot of characters that shouldn't be used for file names. Letters, numbers, and "_" are the only really safe ones. "." is used in many file names, of course, but some systems will get really confused if you don't use it exactly as they expect you to.

Link to comment
Share on other sites

  On 6/18/2021 at 7:24 PM, mikegarrison said:

Nowadays everybody uses software that will automatically calculate any units you want, so it doesn't really matter.

Expand  

Would say that it does matter when we're referring codes and standards. The differences are slight, sure, and conservatism is welcome, but where do you cut the line becomes more glaringly obvious than otherwise.

Link to comment
Share on other sites

  On 6/18/2021 at 7:24 PM, mikegarrison said:

These are mainly old-timey engineering stories. Nowadays everybody uses software that will automatically calculate any units you want, so it doesn't really matter.

Expand  

Mostly true, but I've used software I rather liked that typically wanted all length measurements in either imperial (mills) or metric (mm), and thought that it made more sense to do the occasional calculation myself when the devices were speced the "wrong" way than to flip the thing back and forth between metric and imperial (even though it was probably storing everything as a double and it wouldn't have been an issue).

Also the story took place in a startup incubator on a college campus, so including school calculations without the crutches made sense.

Finally found it: long, long ago when i was studying high school chemistry, the teacher was teaching the "factor label method".  This was a huge help to me in that it not only solved basic high school chemistry problems, it also was used to solve any conversion issues in any physical science problem in any other class (or professionally, although you'd probably use some sort of similar software).  This video even includes his "bar notation", something I haven't seen during my occasional googles of "factor label method" https://www.youtube.com/watch?v=K33txxFsnrg

Link to comment
Share on other sites

 

I prefer metric.

 

I only recently found one of no doubt several sites that converts various rates of gravity acceleration into meters traveled per second.

 

With that knowledge one can easily calculate how long travel will take at any gravity of acceleration listed for any distance measured in kilometers. Since there are 1000 meters in  a kilometer, if you had a 1000g orion drive missile, one pulse burn would allow it to coast  10,000 kilometers in a bit over TEN SECONDS!

Obviously very useful for space scifi.

Because what scifi space show or book ever uses Imperial measures?

 

Kilometers is what everybody uses and everyone KNOWS what you mean.

 

It's just more accessible, and that is what scifi often wants to be to the reader.

 

If you really want to disconnect the reader, throw hawking and relativity equations at them while using imperial measures...during space combat!

Edited by Spacescifi
Link to comment
Share on other sites

The main advantage of US Customary is that the basic units, in particular units of length are very intuitive for humans. The main advantage of SI units is that they're base-ten and easily convertible. I propose, then, a base-12 system based off the customary foot, such that twelve feet make, let's call it a "wheel" for now, and so forth, and basing the measures for volume off the cubic foot rather than the cubic meter.

Link to comment
Share on other sites

  On 6/18/2021 at 8:36 PM, tater said:

If people were serious, they'd use the decimal time they also invented along with metric. ;)

 

Expand  

The French tried but it failed, 10 days weeks was an obvious nerf with one day a week off :)
10 hour a day is too long hours for stuff like shifts. 
20 hours and 100 minutes and 100 seconds would work. 
 

Link to comment
Share on other sites

This thread is quite old. Please consider starting a new thread rather than reviving this one.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...