Beale Posted April 24, 2017 Share Posted April 24, 2017 (edited) 58 minutes ago, Nertea said: Ok, seriously? This kind of crap ruins my morning. I am going to save this page as a glorious example of the failure of our education systems to produce people with basic thinking and reading comprehension skills. There are three instances of this question on the same page. This isn't that hard. Scroll up. Look around. Read a page back even. I don't understand how it's more difficult to do a wee bit of research rather than bothering me and waiting for an answer THAT I JUST POSTED. I've fixed your Gallery. Edited April 24, 2017 by Beale Quote Link to comment Share on other sites More sharing options...
smotheredrun Posted April 24, 2017 Share Posted April 24, 2017 Well, with or without RPM this is a great mod. Thanks @ nertea! Quote Link to comment Share on other sites More sharing options...
Sassenach Posted April 24, 2017 Share Posted April 24, 2017 (edited) My current career is currently based entirely around Mark IV launch vehicles (which is to say, if it takes off from the KSC, it lands at the KSC minus it's payload and fuel. Technically any space plane would do but time is more valuable than fuel so big is beautiful), I posted a picture of my first such earlier, but I've since iterated: It's capable of lofting a significant tonnage to orbit, my most recent mission has been to take 32,000 material kits to a low orbit space station (that I might find a loophole in my self-imposed limit) with about 1000dV left over. However here is what happened when I tried for 56,000 of the same: Which is not a complaint. This is to be expected of designing flimsy, load bearing joints even if they are aesthetically pleasing. Slowly falling apart on the runway without any explosions was just a comical means of failure. I've probably been pushing the bounds of credulity as it is. Edited April 24, 2017 by Sassenach Quote Link to comment Share on other sites More sharing options...
smotheredrun Posted April 24, 2017 Share Posted April 24, 2017 3 hours ago, Sassenach said: My current career is currently based entirely around Mark IV launch vehicles (which is to say, if it takes off from the KSC, it lands at the KSC minus it's payload and fuel. Technically any space plane would do but time is more valuable than fuel so big is beautiful), I posted a picture of my first such earlier, but I've since iterated: It's capable of lofting a significant tonnage to orbit, my most recent mission has been to take 32,000 material kits to a low orbit space station (that I might find a loophole in my self-imposed limit) with about 1000dV left over. However here is what happened when I tried for 56,000 of the same: Which is not a complaint. This is to be expected of designing flimsy, load bearing joints even if they are aesthetically pleasing. Slowly falling apart on the runway without any explosions was just a comical means of failure. I've probably been pushing the bounds of credulity as it is. Apparently you need some Autostrut and KJR love Quote Link to comment Share on other sites More sharing options...
Phelan Posted May 25, 2017 Share Posted May 25, 2017 (edited) How is the IntakeAtm supposed to work? With the small and medium fans (switched to electric mode), I instantly get a flameout ("IntakeAtm deprived"), only the large one actually works. The part info (right-click on the part in the sidebar in the SPH) says Intake Atm 1/1 for the large fan, and 0/0 for the other two. The .cfg files look like the values and behaviour should be the same as far as I can tell (ModuleResourceIntake for IntakeAtm is the same for all three, except for the ten times larger area and intakeSpeed of the small one, and Resource IntakeAtm is the same 0.2/0.4/0.8 scaling as Recource intakeAir for all three). Any ideas? (I've got far too many other mods installed to search for a conflict and stay sane , but considering that the large fan works and the other two don't, I would hope it can be resolved 'internally') Edited May 25, 2017 by Phelan Quote Link to comment Share on other sites More sharing options...
Nertea Posted May 25, 2017 Author Share Posted May 25, 2017 19 hours ago, Phelan said: How is the IntakeAtm supposed to work? With the small and medium fans (switched to electric mode), I instantly get a flameout ("IntakeAtm deprived"), only the large one actually works. The part info (right-click on the part in the sidebar in the SPH) says Intake Atm 1/1 for the large fan, and 0/0 for the other two. The .cfg files look like the values and behaviour should be the same as far as I can tell (ModuleResourceIntake for IntakeAtm is the same for all three, except for the ten times larger area and intakeSpeed of the small one, and Resource IntakeAtm is the same 0.2/0.4/0.8 scaling as Recource intakeAir for all three). Any ideas? (I've got far too many other mods installed to search for a conflict and stay sane , but considering that the large fan works and the other two don't, I would hope it can be resolved 'internally') I haven't seen this issue before, I'll look into it. Quote Link to comment Share on other sites More sharing options...
Schanez Posted May 31, 2017 Share Posted May 31, 2017 Will this get an update for 1.3? Quote Link to comment Share on other sites More sharing options...
RedParadize Posted May 31, 2017 Share Posted May 31, 2017 @Schanez Nertea will get on it when he can. He have many mods to take care of (and some very good stuff is coming btw). You should take a look at forum rules, it is not permitted to ask for update, regardless of how you formulate it. Quote Link to comment Share on other sites More sharing options...
Schanez Posted June 1, 2017 Share Posted June 1, 2017 8 hours ago, RedParadize said: @Schanez Nertea will get on it when he can. He have many mods to take care of (and some very good stuff is coming btw). You should take a look at forum rules, it is not permitted to ask for update, regardless of how you formulate it. Oh, sorry if it sounded like whining or something the like. I was merely curious if it's still being worked on, aka if the author is still actively supporting the mod and all. I am quite new to the modding of KSP, so I have no clues of when the game updates came out, or which mods are still developed. Only recently did I discover the whole new parts and expanded Science Tree. PS. Keep up the good work guys. You make a great game into a glorious one ^.^ Quote Link to comment Share on other sites More sharing options...
cooper5113 Posted June 5, 2017 Share Posted June 5, 2017 (edited) Does this mod's fuselages' tank support RealFuel? It took me a hell of a while to write a RF patch... I probably did repetitive labor? I'm also not sure about the balancing for the fuel tank volume in that homemade .cfg patch of mine, so it would be great to hear that I spent an hour for something that already exists. Great work btw, I love these large and chubby pods and cargo bay Edited June 5, 2017 by cooper5113 Quote Link to comment Share on other sites More sharing options...
limofs Posted June 7, 2017 Share Posted June 7, 2017 To fix crashes on 1.3 I suggest deleting subfolder of parts called engines. Not sure about you, but I have not ever used these engines and without them this mod works just fine for me with 1.3 Quote Link to comment Share on other sites More sharing options...
ss8913 Posted June 12, 2017 Share Posted June 12, 2017 On 6/7/2017 at 4:28 PM, limofs said: To fix crashes on 1.3 I suggest deleting subfolder of parts called engines. Not sure about you, but I have not ever used these engines and without them this mod works just fine for me with 1.3 this does fix it. I believe it fixes it by making KSP not load the Deployable Engines Plugin DLL which isn't rebuilt for 1.3.0 yet. Perhaps rebuilding that plugin will cause the engines to work. I do like the all-electric fan engines in this mod, so I may attempt this to get those engines working again... Quote Link to comment Share on other sites More sharing options...
ss8913 Posted June 15, 2017 Share Posted June 15, 2017 has anyone attempted a recompile of the plugin? I might try it, but if anyone already has... does it work? I really want the electric fan engines back can make a nice VTOL with those, using TCA and a ThF4 reactor from KSPIE On 6/5/2017 at 8:03 AM, cooper5113 said: Does this mod's fuselages' tank support RealFuel? It took me a hell of a while to write a RF patch... I probably did repetitive labor? I'm also not sure about the balancing for the fuel tank volume in that homemade .cfg patch of mine, so it would be great to hear that I spent an hour for something that already exists. Great work btw, I love these large and chubby pods and cargo bay ConfigurableContainers will allow fuel replacement in these parts, but sadly CC conflicts with Interstellar Fuel Switch, and IFS is an absolute must-have, so... maybe if we can get a MFT patch, that'd work, since MFT can coexist with IFS. Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted June 15, 2017 Share Posted June 15, 2017 (edited) On 5/31/2017 at 5:55 PM, RedParadize said: @Schanez Nertea will get on it when he can. He have many mods to take care of (and some very good stuff is coming btw). You should take a look at forum rules, it is not permitted to ask for update, regardless of how you formulate it. Just an FYI, they rescinded that rule. But it's still nice to be polite and to wait for the mod author to finish Edited June 15, 2017 by linuxgurugamer Quote Link to comment Share on other sites More sharing options...
Nertea Posted June 15, 2017 Author Share Posted June 15, 2017 You can look at my git account and see the constant stream of commits in the last few days. I'm working my ass off here, give me some time. Quote Link to comment Share on other sites More sharing options...
smotheredrun Posted June 16, 2017 Share Posted June 16, 2017 2 hours ago, Nertea said: You can look at my git account and see the constant stream of commits in the last few days. I'm working my ass off here, give me some time. Take as much time as you need. Thank you. Quote Link to comment Share on other sites More sharing options...
T.A.P.O.R. Posted June 16, 2017 Share Posted June 16, 2017 21 hours ago, Nertea said: You can look at my git account and see the constant stream of commits in the last few days. I'm working my ass off here, give me some time. Not just your GIT account. I've had your Spacedock page open for a few days and have seen the mass update to your mods. Thanks for all your great work! Quote Link to comment Share on other sites More sharing options...
Nertea Posted June 16, 2017 Author Share Posted June 16, 2017 Update for this is delayed ~2 weeks due to me being away and planning some nice improvements for the propeller engines. Quote Link to comment Share on other sites More sharing options...
Messernacht Posted June 16, 2017 Share Posted June 16, 2017 32 minutes ago, Nertea said: Update for this is delayed ~2 weeks due to me being away and planning some nice improvements for the propeller engines. No worries. The high-standard of your mods and the amount of fun they add makes the wait worthwhile. Looking forward to it. Quote Link to comment Share on other sites More sharing options...
HoveringKiller Posted July 9, 2017 Share Posted July 9, 2017 Love the mod Nertea! Finally convinced myself to try spaceplanes after downloading this mod. Any teasers or anything for upcoming update? Take your time, just something to keep our appetites in check;) Quote Link to comment Share on other sites More sharing options...
Nertea Posted July 10, 2017 Author Share Posted July 10, 2017 Nothing much new, I am converting the props to a different plugin than FS, which is barely limping along. I ran into some problems that I have to write some code to fix and haven't felt like doing that yet. Quote Link to comment Share on other sites More sharing options...
GreatGreengGoo Posted July 11, 2017 Share Posted July 11, 2017 Nertea take your time. We have 1.2.2 still. Your one of the best modders out there. We appreciate the work you do, no rush man. Enjoy what you do and know we enjoy it too Quote Link to comment Share on other sites More sharing options...
Spaceception Posted July 12, 2017 Share Posted July 12, 2017 Ooooooh, I could use this, 3.75m spaceplanes are fine and all, but they're a bit too small for holding base pieces, this would be PERFECT though, and as per usual by Nertea, the parts look wonderful Quote Link to comment Share on other sites More sharing options...
NomenNescio Posted July 13, 2017 Share Posted July 13, 2017 Based on these other comments here, it would seem people have got this mod working with v1.3, could anyone share how they did this, because I get a crash every single time I try to load up the game with this mod. Like are you omitting any of the additional folders that come with this mod? Quote Link to comment Share on other sites More sharing options...
HebaruSan Posted July 13, 2017 Share Posted July 13, 2017 4 minutes ago, NomenNescio said: Based on these other comments here, it would seem people have got this mod working with v1.3 In fact all the recent comments say the opposite, people are using this mod on 1.2.2 and waiting for an update for 1.3, which Nertea has begun working on. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.