Hay Posted February 13, 2018 Share Posted February 13, 2018 8 hours ago, CobaltWolf said: Who knows what this is? spinny boi? Quote Link to comment Share on other sites More sharing options...
CobaltWolf Posted February 13, 2018 Author Share Posted February 13, 2018 11 hours ago, Rock3tman_ said: gross 10 hours ago, TimothyC said: You spin me right 'round baby right 'round.... 9 hours ago, Saltshaker said: Fireworks! 9 hours ago, MaverickSawyer said: It's an Atlas Centaur, properly Kerbalized. The little lump on the side of the adaptor, though... I'm not so sure about. 2 hours ago, Hay said: spinny boi? It's the elusive and little understood Atlas 2 Roll Control System. Basically a pod with a little spherical monoprop tank and some thrusters. It replaced the LR-101 Verniers on Atlas II, IIA, and IIAS. Quote Link to comment Share on other sites More sharing options...
Saltshaker Posted February 14, 2018 Share Posted February 14, 2018 (edited) While we're on the topic of Centaur, could you make the single-engined (SEC) variant? (image for reference) Edited February 14, 2018 by Saltshaker Quote Link to comment Share on other sites More sharing options...
CobaltWolf Posted February 14, 2018 Author Share Posted February 14, 2018 9 minutes ago, Saltshaker said: While we're on the topic of Centaur, could you make the single-engined (SEC) variant? (image for reference) Let it be so (eventually) In other news, Atlas II RCS is up on Github Quote Link to comment Share on other sites More sharing options...
Pappystein Posted February 14, 2018 Share Posted February 14, 2018 22 minutes ago, Saltshaker said: While we're on the topic of Centaur, could you make the single-engined (SEC) variant? (image for reference) Um, Correct me if I am wrong but isn't that already possible? I could swear I was running around with a Single test engine on a Centaur just two hours ago... There are a total of 5 nodes on the Centaur Engine mount. Connects at the top to the centaur tank above Connects to the Centaur Inter-stage (both versions) Connects to a SINGLE RL-10 type engine Connects to ONE of 2 RL-10 engines Connects to the OTHER of 2 RL-10 engines. Did something get altered in the recent release? I know that a Centaur + RL-10B-2 just does not fit under the Centaur Inter-stages (but I think it WILL fit if you use tweakscale and the Delta Inter-stage...) Quote Link to comment Share on other sites More sharing options...
Saltshaker Posted February 14, 2018 Share Posted February 14, 2018 Just now, Pappystein said: Um, Correct me if I am wrong but isn't that already possible? I could swear I was running around with a Single test engine on a Centaur just two hours ago... There are a total of 5 nodes on the Centaur Engine mount. Connects at the top to the centaur tank above Connects to the Centaur Inter-stage (both versions) Connects to a SINGLE RL-10 type engine Connects to ONE of 2 RL-10 engines Connects to the OTHER of 2 RL-10 engines. Did something get altered in the recent release? I know that a Centaur + RL-10B-2 just does not fit under the Centaur Inter-stages (but I think it WILL fit if you use tweakscale and the Delta Inter-stage...) Might have been using the Vejur/Vega engine mount Quote Link to comment Share on other sites More sharing options...
Pappystein Posted February 14, 2018 Share Posted February 14, 2018 (edited) 13 hours ago, CobaltWolf said: It's the elusive and little understood Atlas 2 Roll Control System. Basically a pod with a little spherical monoprop tank and some thrusters. It replaced the LR-101 Verniers on Atlas II, IIA, and IIAS. Yep and it is less use-full but WAY more efficient than the LR-101s were... Since IRL the LR-101s were both Roll-Control and Vernier control (fine tuning the Atlas Rockets trajectory even after MECO) Just a heads up to all of you grabbing this off the Git... IRL it wasn't fired up until just before booster separation (the Boosters performed Roll Control up until Booster Cut-off and separation.) Besides when have you known RCS to work well at Sea-level Edited February 14, 2018 by Pappystein Quote Link to comment Share on other sites More sharing options...
TimothyC Posted February 14, 2018 Share Posted February 14, 2018 41 minutes ago, Saltshaker said: While we're on the topic of Centaur, could you make the single-engined (SEC) variant? (image for reference) The current Inon engine mount supports both single and double engine operations. The covers that used to exist on the double engine mounts for single engine ops are not there any more, and vice versa (I should log an issue on the github for this), but you can use it for both versions. Also, the B version does fit under the Inon decoupler. Quote Link to comment Share on other sites More sharing options...
Stone Blue Posted February 14, 2018 Share Posted February 14, 2018 (edited) Kewl beans on the new awesome engines Edited February 14, 2018 by Stone Blue Quote Link to comment Share on other sites More sharing options...
CobaltWolf Posted February 14, 2018 Author Share Posted February 14, 2018 8 hours ago, TimothyC said: The current Inon engine mount supports both single and double engine operations. The covers that used to exist on the double engine mounts for single engine ops are not there any more, and vice versa (I should log an issue on the github for this), but you can use it for both versions. Also, the B version does fit under the Inon decoupler. Yeaahhhhh you should, it's another one of those "oh man I forgot it in the last release" type deals. Quote Link to comment Share on other sites More sharing options...
Kerbal01 Posted February 14, 2018 Share Posted February 14, 2018 5 ton Pioneer 6 derived Sarnus orbiter finally arriving at Sarnus, 32 years after launch. Titan IVA/Centaur launched it directly to encounter, so I used that to test systems for the sarnus mission, swung back out to solar orbit, did the raising burn to sarnus. Missed the node by two days but got into the SOI somehow. Making a 20 m/s correction burn at apogee, headed to sarnus after one more solar orbit. Periapsis inbetween Slate and Eeloo. Propulsion is Ion engines with a Star 48 to help the insertion burn. Quote Link to comment Share on other sites More sharing options...
Saltshaker Posted February 15, 2018 Share Posted February 15, 2018 5 hours ago, Kerbal01 said: 5 ton Pioneer 6 derived Sarnus orbiter finally arriving at Sarnus, 32 years after launch. Titan IVA/Centaur launched it directly to encounter, so I used that to test systems for the sarnus mission, swung back out to solar orbit, did the raising burn to sarnus. Missed the node by two days but got into the SOI somehow. Making a 20 m/s correction burn at apogee, headed to sarnus after one more solar orbit. Periapsis inbetween Slate and Eeloo. Propulsion is Ion engines with a Star 48 to help the insertion burn. uh i made an eve probe and launched it with a prometheus 4, just a typical interplanetary transfer Quote Link to comment Share on other sites More sharing options...
Pappystein Posted February 15, 2018 Share Posted February 15, 2018 6 hours ago, Kerbal01 said: 5 ton Pioneer 6 derived Sarnus orbiter finally arriving at Sarnus, 32 years after launch. Titan IVA/Centaur launched it directly to encounter, so I used that to test systems for the sarnus mission, swung back out to solar orbit, did the raising burn to sarnus. Missed the node by two days but got into the SOI somehow. Making a 20 m/s correction burn at apogee, headed to sarnus after one more solar orbit. Periapsis inbetween Slate and Eeloo. Propulsion is Ion engines with a Star 48 to help the insertion burn. 28 minutes ago, Saltshaker said: uh i made an eve probe and launched it with a prometheus 4, just a typical interplanetary transfer Um, I launched a Rocket into a sub-orbital path? Sorry I couldn't resist! Seriously, Kerbal01, I assume you are using some sort of planet pack mod... OPM or something else? On the subject of launches. Has anyone succeeded in using the long inline AJ-260 to launch a Munar lander + Apollo to the Mun? Quote Link to comment Share on other sites More sharing options...
MaverickSawyer Posted February 15, 2018 Share Posted February 15, 2018 Yep! Works like a charm in stock. Quote Link to comment Share on other sites More sharing options...
Kerbal01 Posted February 15, 2018 Share Posted February 15, 2018 33 years after launch, Sarnus Orbiter 1 arrived safely at Sarnus. Now to reflect on the wisdom of sending a solar powered ion engine probe to saturn... 30 minutes ago, MaverickSawyer said: Yep! Works like a charm in stock. I'm running 2.5x OPM. Quote Link to comment Share on other sites More sharing options...
CobaltWolf Posted February 15, 2018 Author Share Posted February 15, 2018 (edited) New part WIP: 0.9375m Radial Attachment Port for expanding the Skylab MDA with two more lateral ports. Also useable any time you need a 0.9375m attachment point. Notably, the Agena Docking Port is also 0.9375m. Edited February 15, 2018 by CobaltWolf Quote Link to comment Share on other sites More sharing options...
MaverickSawyer Posted February 15, 2018 Share Posted February 15, 2018 THANK YOU. Quote Link to comment Share on other sites More sharing options...
mindseyemodels Posted February 15, 2018 Share Posted February 15, 2018 (edited) is this mod in conflict with any others by any chance? because this or near future iva props breaks my game to where it crashes before the menu... i know its those two via process of elimination i re-install mods a few at a time(I'm trying to fix my game) and i have through reductive installation(installing fewer mods per group each time i delete a group to remove troublesome mods) narrowed it down to this and near future IVA props... i use ksp version 1.3.0 so could you tell me wats wrong and how to install it without breaking the sh!t out of my game so i believe a fix is in order perhaps? I'm not trying to be rude just needed to make it known that something is broken with either this or near future iva Edited February 15, 2018 by mindseyemodels Quote Link to comment Share on other sites More sharing options...
TimothyC Posted February 15, 2018 Share Posted February 15, 2018 10 minutes ago, mindseyemodels said: is this mod in conflict with any others by any chance? because this or near future iva props breaks my game to where it crashes before the menu... i use ksp version 1.3.0 so could you tell me wats wrong and how to install it without breaking the sh!t out of my game so i believe a fix is in order perhaps? I'm not trying to be rude just needed to make it known tat something is broken with either this or near future iva BDB is usually only tested against the latest version of the game, or 1.3.1 at the moment. Quote Link to comment Share on other sites More sharing options...
mindseyemodels Posted February 15, 2018 Share Posted February 15, 2018 Just now, TimothyC said: BDB is usually only tested against the latest version of the game, or 1.3.1 at the moment. oh but does it conflict with any addons? i need to use this mod if i want to accurately recreate the Apollo missions and so far things aren't looking up for me having this mod Quote Link to comment Share on other sites More sharing options...
CobaltWolf Posted February 15, 2018 Author Share Posted February 15, 2018 (edited) 5 hours ago, mindseyemodels said: oh but does it conflict with any addons? i need to use this mod if i want to accurately recreate the Apollo missions and so far things aren't looking up for me having this mod The majority of mods built against 1.3.1 will not work in 1.3.0 and vice versa. Why dont you update your game? That is the reason your are crashing. Edited February 15, 2018 by CobaltWolf Quote Link to comment Share on other sites More sharing options...
mindseyemodels Posted February 15, 2018 Share Posted February 15, 2018 simple reason... not all of the mods i have are updated for 1.3.1 Quote Link to comment Share on other sites More sharing options...
CobaltWolf Posted February 15, 2018 Author Share Posted February 15, 2018 1 minute ago, mindseyemodels said: simple reason... not all of the mods i have are updated for 1.3.1 Out of curiosity, which ones? Anyways... Hmm. Alright, NF Props wouldnt be crashing your game so thats fine. Make sure you have the 1.3.0 versions of the dependencies. Then, go in Github, find the last BDB release for KSP 1.3.0. Take the BDB.dll from that downloads's Bluedog_DB/Plugins folder and replace the one in your install. Should 99% work; off the top of my head, I believe the ion RCS parts won't because their module wasn't in our plugin until 1.3.1. Quote Link to comment Share on other sites More sharing options...
mindseyemodels Posted February 15, 2018 Share Posted February 15, 2018 (edited) 23 minutes ago, CobaltWolf said: Out of curiosity, which ones? Anyways... Hmm. Alright, NF Props wouldnt be crashing your game so thats fine. Make sure you have the 1.3.0 versions of the dependencies. Then, go in Github, find the last BDB release for KSP 1.3.0. Take the BDB.dll from that downloads's Bluedog_DB/Plugins folder and replace the one in your install. Should 99% work; off the top of my head, I believe the ion RCS parts won't because their module wasn't in our plugin until 1.3.1. well imma TRY 1.3.1 but if that don't work... imma revert to older version ...well that didn't work at all if anything it just made the game MORE broken no matter i will keep trying Edited February 15, 2018 by mindseyemodels Quote Link to comment Share on other sites More sharing options...
Saltshaker Posted February 15, 2018 Share Posted February 15, 2018 58 minutes ago, mindseyemodels said: well imma TRY 1.3.1 but if that don't work... imma revert to older version ...well that didn't work at all if anything it just made the game MORE broken no matter i will keep trying Either make sure all of your mods are for 1.3.0 or for 1.3.1, and be sure to download only the 1.3.0 versions. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.