akron Posted March 27, 2018 Author Share Posted March 27, 2018 1 hour ago, viperwolf said: @akron If i may I would like to use your AACS Advanced Attitude Control System for a mechjeb case. Basically take all the guts out of the MJ case a put them into the AACS case. I like that little case for that purpose, but I also want to keep the Original aswell. Its for my personal use only, and Ive done this in the past with another part. However, your parts are set up way different than what im use to. Sure. Go for it. I'm just not sure what you need from me. Also. Fyi I already have mechjeb and Engineer enabled on that part. I'm assuming you need it setup differently. Quote Link to comment Share on other sites More sharing options...
viperwolf Posted March 27, 2018 Share Posted March 27, 2018 1 minute ago, akron said: Sure. Go for it. I'm just not sure what you need from me. Also. Fyi I already have mechjeb and Engineer enabled on that part. I'm assuming you need it setup differently. Thank you, but i cant find all the files i need to go along with it. I cannot get it to show up for anything when i make the change. Quote Link to comment Share on other sites More sharing options...
akron Posted March 27, 2018 Author Share Posted March 27, 2018 3 hours ago, viperwolf said: Thank you, but i cant find all the files i need to go along with it. I cannot get it to show up for anything when i make the change. I would just copy the cfg and change the part name. It will still reference the part in my mod and you can then make whatever changes you want. What is it you're trying to do that the mechJeb config does not already? Just curious Quote Link to comment Share on other sites More sharing options...
viperwolf Posted March 27, 2018 Share Posted March 27, 2018 13 minutes ago, akron said: I would just copy the cfg and change the part name. It will still reference the part in my mod and you can then make whatever changes you want. What is it you're trying to do that the mechJeb config does not already? Just curious Im trying to use it to test some of my stock set ups without any mods installed, just mechjeb. Thats why I need the actual file locations/names that use the AACS. Quote Link to comment Share on other sites More sharing options...
akron Posted March 27, 2018 Author Share Posted March 27, 2018 1 minute ago, viperwolf said: Im trying to use it to test some of my stock set ups without any mods installed, just mechjeb. Thats why I need the actual file locations/names that use the AACS. Coatl Aerospace/ProbesPlus/Assets/aacs.mu Coatl Aerospace/ProbesPlus/Assets/probes_a_D.dds Coatl Aerospace/ProbesPlus/Parts/Control/aacs.cfg Quote Link to comment Share on other sites More sharing options...
viperwolf Posted March 27, 2018 Share Posted March 27, 2018 1 minute ago, akron said: Coatl Aerospace/ProbesPlus/Assets/aacs.mu Coatl Aerospace/ProbesPlus/Assets/probes_a_D.dds Coatl Aerospace/ProbesPlus/Parts/Control/aacs.cfg Thank you, I appreciate it. I guess mechjeb will never update the case lol Quote Link to comment Share on other sites More sharing options...
gaooo Posted March 27, 2018 Share Posted March 27, 2018 Sorry if this question was already asked, but are there any parts modeled after any of the Mars rovers? Quote Link to comment Share on other sites More sharing options...
Cheesecake Posted March 27, 2018 Share Posted March 27, 2018 6 hours ago, gaooo said: Sorry if this question was already asked, but are there any parts modeled after any of the Mars rovers? No, not yet. Quote Link to comment Share on other sites More sharing options...
akron Posted March 28, 2018 Author Share Posted March 28, 2018 22 hours ago, gaooo said: Sorry if this question was already asked, but are there any parts modeled after any of the Mars rovers? Like @Cheesecake mentioned, no, not yet. Viking is coming on the next update, and I don't think I can avoid rover parts for much longer after that. By the way, welcome to Forums! Quote Link to comment Share on other sites More sharing options...
gaooo Posted March 28, 2018 Share Posted March 28, 2018 Thank you! 5 hours ago, akron said: Viking is coming on the next update, and I don't think I can avoid rover parts for much longer after that. Awesome, can't wait. Quote Link to comment Share on other sites More sharing options...
akron Posted March 29, 2018 Author Share Posted March 29, 2018 I've started meddling again with the mod files. I hope to fix those rcs and get some other issues solved starting this week. Look out for random Github pushes if you wanna test. I just fixed the disappearing Draco and TexturesUnlimited compatibility. More to come Quote Link to comment Share on other sites More sharing options...
Hafym Posted March 29, 2018 Share Posted March 29, 2018 Hi. I can not find the details for the descent vehicle of Huygens, as in these photos. How to solve this problem? Quote Link to comment Share on other sites More sharing options...
Gordon Dry Posted March 29, 2018 Share Posted March 29, 2018 (edited) @akron I'm not sure what this is about: PartLoader: Compiling Part 'Coatl Aerospace/ProbesPlus/Parts/Electrical/sp_juno_mag/sp_juno_mag' (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/DebugBindings.gen.cpp Line: 51) PartLoader: Encountered exception during compilation. System.NullReferenceException: Object reference not set to an instance of an object at PartLoader.ReplaceTextures (UnityEngine.GameObject model, System.Collections.Generic.List`1 textureNames, System.Collections.Generic.List`1 newTextures) [0x00000] in <filename unknown>:0 at PartLoader.CompileModel (.UrlConfig cfg, .ConfigNode partCfg, Single scaleFactor, .AvailablePart partInfo) [0x00000] in <filename unknown>:0 at PartLoader.ParsePart (.UrlConfig urlConfig, .ConfigNode node) [0x00000] in <filename unknown>:0 at PartLoader+<CompileParts>c__Iterator1.MoveNext () [0x00000] in <filename unknown>:0 (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/DebugBindings.gen.cpp Line: 51) PartCompiler: Cannot compile part ... PartLoader: Compiling Part 'Coatl Aerospace/ProbesPlus/Parts/Meridiani/_Draco/ca_draco' (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/DebugBindings.gen.cpp Line: 51) PartLoader: Encountered exception during compilation. System.NullReferenceException: Object reference not set to an instance of an object at PartLoader.ReplaceTextures (UnityEngine.GameObject model, System.Collections.Generic.List`1 textureNames, System.Collections.Generic.List`1 newTextures) [0x00000] in <filename unknown>:0 at PartLoader.CompileModel (.UrlConfig cfg, .ConfigNode partCfg, Single scaleFactor, .AvailablePart partInfo) [0x00000] in <filename unknown>:0 at PartLoader.ParsePart (.UrlConfig urlConfig, .ConfigNode node) [0x00000] in <filename unknown>:0 at PartLoader+<CompileParts>c__Iterator1.MoveNext () [0x00000] in <filename unknown>:0 (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/DebugBindings.gen.cpp Line: 51) PartCompiler: Cannot compile part ... PartLoader: Compiling Part 'Coatl Aerospace/ProbesPlus/Parts/Meridiani/draco_parachute/ca_draco_parachute' (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/DebugBindings.gen.cpp Line: 51) PartLoader: Encountered exception during compilation. System.NullReferenceException: Object reference not set to an instance of an object at PartLoader.ReplaceTextures (UnityEngine.GameObject model, System.Collections.Generic.List`1 textureNames, System.Collections.Generic.List`1 newTextures) [0x00000] in <filename unknown>:0 at PartLoader.CompileModel (.UrlConfig cfg, .ConfigNode partCfg, Single scaleFactor, .AvailablePart partInfo) [0x00000] in <filename unknown>:0 at PartLoader.ParsePart (.UrlConfig urlConfig, .ConfigNode node) [0x00000] in <filename unknown>:0 at PartLoader+<CompileParts>c__Iterator1.MoveNext () [0x00000] in <filename unknown>:0 (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/DebugBindings.gen.cpp Line: 51) PartCompiler: Cannot compile part ... PartLoader: Compiling Part 'Coatl Aerospace/ProbesPlus/Parts/Meridiani/_Meridiani/meridiani' (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/DebugBindings.gen.cpp Line: 51) Module KSPTextureSwitch threw during OnLoad: System.IndexOutOfRangeException: Array index is out of range. at KSPShaderTools.KSPTextureSwitch.initialize () [0x00000] in <filename unknown>:0 at KSPShaderTools.KSPTextureSwitch.OnLoad (.ConfigNode node) [0x00000] in <filename unknown>:0 at PartModule.Load (.ConfigNode node) [0x00000] in <filename unknown>:0 (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/DebugBindings.gen.cpp Line: 51) Edited March 29, 2018 by Gordon Dry Quote Link to comment Share on other sites More sharing options...
akron Posted March 30, 2018 Author Share Posted March 30, 2018 18 hours ago, Hafym said: Hi. I can not find the details for the descent vehicle of Huygens, as in these photos. How to solve this problem? Welcome to the Forum. Try this, go the the Github page (LINK) and download the latest repository. Instructions are on that page. Install that update and let me know if it fixes the issue @Gordon Dry I just had that happen to me in my new 1.4.2 test install. KSP's texture referencing is absolute crap. I'll either not be able to save you guys some RAM (by using duplicate files) or simply reduce model quality. I'll probably just reduce detail on the Juno magnetometer because it's not that critical. It's 2018, things should just work Quote Link to comment Share on other sites More sharing options...
Gordon Dry Posted March 30, 2018 Share Posted March 30, 2018 Well, Unity ... and stuff. But it's 2018 for real, 3D-knitting-machines are the newest things a nerd could have... Quote Link to comment Share on other sites More sharing options...
mercaholic75 Posted March 30, 2018 Share Posted March 30, 2018 Why does this say it works with 1.4.1 when it doesn't? Quote Link to comment Share on other sites More sharing options...
LatiMacciato Posted March 30, 2018 Share Posted March 30, 2018 5 minutes ago, mercaholic75 said: Why does this say it works with 1.4.1 when it doesn't? You might want to research the term "WIP", hint: it means "Work In Progress"! This mod is basically beta or in a very early state but pretty much usable! Quote Link to comment Share on other sites More sharing options...
mercaholic75 Posted March 30, 2018 Share Posted March 30, 2018 I think the drop box link is just outdated. I think I got it working now. Quote Link to comment Share on other sites More sharing options...
akron Posted March 30, 2018 Author Share Posted March 30, 2018 18 minutes ago, mercaholic75 said: I think the drop box link is just outdated. I think I got it working now. It works in 1.4.x with some know issues mostly with the newer, more complex parts and the RCS effects (Which affected all mods using the old module, not just mine) The Github repository will always have the latest WIP version if you want to try the latest release. I posted the link up in the page. As @LatiMacciato said, it is a work in progress. the Github repository always has the latest. Quote Link to comment Share on other sites More sharing options...
LatiMacciato Posted March 30, 2018 Share Posted March 30, 2018 @akron did you know the CA-AD1-R Small Folding Relay Antenna perfectly fits ontop of the Lynx Rover? Quote Link to comment Share on other sites More sharing options...
HooHungLow Posted March 30, 2018 Share Posted March 30, 2018 2 hours ago, LatiMacciato said: @akron did you know the CA-AD1-R Small Folding Relay Antenna perfectly fits ontop of the Lynx Rover? Lol, I thought I was the only one! Quote Link to comment Share on other sites More sharing options...
akron Posted March 30, 2018 Author Share Posted March 30, 2018 @LatiMacciato That is very cool. No I have not used those rovers in a while Quote Link to comment Share on other sites More sharing options...
Hafym Posted March 30, 2018 Share Posted March 30, 2018 I installed everything like you said, but the details for Huygens did not appear. Maybe I'm looking bad? how do these details look on the menu? Quote Link to comment Share on other sites More sharing options...
akron Posted March 30, 2018 Author Share Posted March 30, 2018 2 hours ago, Hafym said: I installed everything like you said, but the details for Huygens did not appear. Maybe I'm looking bad? how do these details look on the menu? What exactly do you mean the "details" ? Quote Link to comment Share on other sites More sharing options...
Hafym Posted March 30, 2018 Share Posted March 30, 2018 Вот эта деталь меня не загружается и я не могу найти его в речь Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.