Jump to content

OSIRIS-REx Asteroid Sample Return


IonStorm

Recommended Posts

  On 10/25/2020 at 8:59 PM, HebaruSan said:

If it does turn out to be typical, that's yet another thing that needs to be fixed about sci fi "asteroid field" scenes...

  Reveal hidden contents
Expand  

We've known since Voyager (or possibly Pioneer) that "dodging asteroids" was far easier than dodging satellites in LEO.  I think the ISS has had to maneuver to avoid a near miss multiple times.  I don't think any spacecraft has had to dodge an asteroid (and most of them can't and make it through).

It would make the classic video game "Asteroids" a lot less fun if a single shot turned a "large" asteroid into a fine mist small rocks, although I suspect the "boulders" such as Mount Doom are in fact actual boulders.  I don't think we can tell from Osiris Rex's data, but it would be great if we did.

Link to comment
Share on other sites

  On 10/25/2020 at 10:08 PM, IonStorm said:

There are two gas bottles left, but only one sampling head and one sample return capsule.  

Expand  

So the entire sampling head is put into the return capsule, as opposed to dumping samples out of the sampling head into the return capsule and leaving the head behind? I suppose dumping the samples would be tricky in zero G, anyway.

Link to comment
Share on other sites

  On 10/26/2020 at 7:01 AM, Shpaget said:

So the entire sampling head is put into the return capsule, as opposed to dumping samples out of the sampling head into the return capsule and leaving the head behind? I suppose dumping the samples would be tricky in zero G, anyway.

Expand  

Yes. Plus we want all the adhering dust and the material on the contact pads. 

Link to comment
Share on other sites

  On 10/27/2020 at 7:17 PM, cubinator said:

Wouldn't you like to put the whole asteroid in a bag and land it on Earth...

Expand  

No.  One of mission objectives is get data not to let Bennu land on Earth in 2175-2199 :D.  But,  several tonnes from different locations and depths would be illuminating.  However, I'll be quite content with a TAGSAM head overflowing with regolith.

Link to comment
Share on other sites

  On 10/27/2020 at 8:11 PM, IonStorm said:

No.  One of mission objectives is get data not to let Bennu land on Earth in 2175-2199 :D.  But,  several tonnes from different locations and depths would be illuminating.  However, I'll be quite content with a TAGSAM head overflowing with regolith.

Expand  

Well, Mars then? Warm up the poles a little? :D 

Link to comment
Share on other sites

  On 10/27/2020 at 8:11 PM, IonStorm said:

However, I'll be quite content with a TAGSAM head overflowing with regolith.

Expand  

With the overflowing amount of samples upon re-entry (which being a Utahn I can't wait for.) is there a chance that the overflowing amount might cause an anomaly in the capsule? Or is the inside of the capsule separated by all the things that preform the tasks on re-entry?

Also it's super cool that you have a forum account. It's nice to have a space craft engineer here on the forums.

  On 10/27/2020 at 9:14 PM, cubinator said:

Well, Mars then? Warm up the poles a little? :D 

Expand  

Bennu_Orbit.png

chuckles, I don't think there is a possibility of getting it there.

Edited by Guest
Link to comment
Share on other sites

  On 10/28/2020 at 4:05 AM, The Doodling Astronaut said:

With the overflowing amount of samples upon re-entry (which being a Utahn I can't wait for.) is there a chance that the overflowing amount might cause an anomaly in the capsule? Or is the inside of the capsule separated by all the things that preform the tasks on re-entry?

Also it's super cool that you have a forum account. It's nice to have a space craft engineer here on the forums.

chucles, I don't think there is a possibility of getting it there.

Expand  

The sample return capsule (SRC) is designed to have a separate compartment for the TAGSAM head from the electronics and parachute.  In the below picture (Bierhaus et al. 2018) on the right you can see the capture ring on which the TAGSAM head sits.  When the lid closes the compartment with the sample is dust-tight.  We anticipated that there would be loose material, particularly during spacecraft operations and re-entry, so this is within the scope of testing.  The SRC will land in the Utah Test and Training Range in Dugway, UT at 8:40am MDT on September 24, 2023.  

Also, I'm actually not an engineer, but a scientist (Ph.D. in biochemistry).  There are a few others here.  The deputy PI of the Dragonfly mission is active on the forums.  I've been playing KSP since v0.10.1 (who remembers the Overthrottle light?), but I don't have a lot to time to play and less time for the forums, except for this thread.

As it happens, I gave a short on OSIRIS-REx overview talk today with a colleague at https://www.ustream.tv/recorded/128367108, if you want some additional details on the mission.

And yes, you are correct getting Bennu to Mars would take an awful lot of energy.  The orbital diagram you show from the day before the OSIRIS-REx launch from the old JPL Small Body Database Browser doesn't even give a sense of the inclination change needed.  The new version of the diagram is easier to see.

11214_2018_521_Fig4_HTML.jpg

 

Link to comment
Share on other sites

  On 10/28/2020 at 4:53 AM, tater said:

The sample container is dust tight, is it also gas tight? What about volatiles?

Expand  

The SRC is not a pressure vessel, that would require a lot more mass.  However, the vent to atmosphere is through a filter.  You can see it in panel b in the figure in my previous post above the ne in witness as a circle in the top of the internal canister.  It will be analyzed for trapped volatiles.  See section 7.2-7.6 of Dworkin et al. 2018 if you want details of what is trapped at what efficiency in lab testing.

Link to comment
Share on other sites

  On 10/29/2020 at 12:37 AM, .50calBMG said:

Do you have any sense as to how much sample you were able retain after the tag? Is there a way to measure that in the return capsule?

Expand  

There are a range of models and there is hope to be able to use some of arm motions to generate an estimate.  The top priority was getting the sample safely stored.  That done we can try to look at the data and refine the models.  Though, since we will know for sure in three years and there is nothing we can do with the result other than improve our sample allocation and curation plans, it isn't clear that devoting a lot of engineering time for analysis is necessary now (though it would be interesting).

Link to comment
Share on other sites

  On 10/29/2020 at 12:46 AM, IonStorm said:

There are a range of models and there is hope to be able to use some of arm motions to generate an estimate.  The top priority was getting the sample safely stored.  That done we can try to look at the data and refine the models.  Though, since we will know for sure in three years and there is nothing we can do with the result other than improve our sample allocation and curation plans, it isn't clear that devoting a lot of engineering time for analysis is necessary now (though it would be interesting).

Expand  

I just want to see you guys bring the sample home safe. You know you've got a big container full of rock, and it's finally safely sealed up, so we can all wait to put it on a nice measuring scale back on Earth.

That said, what's the maximum mass of rock that would be in the sample head if it was perfectly full?

Link to comment
Share on other sites

  On 10/29/2020 at 4:30 AM, cubinator said:

I just want to see you guys bring the sample home safe. You know you've got a big container full of rock, and it's finally safely sealed up, so we can all wait to put it on a nice measuring scale back on Earth.

That said, what's the maximum mass of rock that would be in the sample head if it was perfectly full?

Expand  

It depends on the density you assume. A reasonable number is about 2kg. 

  On 10/29/2020 at 5:37 AM, HebaruSan said:

Asterisk, possibly very loose dust.

Makes me wonder how much more could have been learned in this instance from directly observing the site as the collection occurred. And are there any images of the hole left behind taken on the way out?

Expand  

It would be nice to go back and look at the site. Lots to learn, but that comes at a cost: in both money and risk. With a collected sample, unfortunately it isn’t worth it.  Two differences from KSP: no F9 and operating a spacecraft also takes funds. 

Link to comment
Share on other sites

  On 10/29/2020 at 11:54 AM, IonStorm said:

It would be nice to go back and look at the site. Lots to learn, but that comes at a cost: in both money and risk. With a collected sample, unfortunately it isn’t worth it.  Two differences from KSP: no F9 and operating a spacecraft also takes funds. 

Expand  

Did you already leave from Bennu permanently?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...