[1.8.x- 1.12.x] LLL Continued Dev Thread - New BETA Release

[LeLeon]

2 hours ago, V8jester said:

Oooo no Bueno....

That version actually breaks more than it fixes. Not sure what happened between the two but 1.0.2-5 actually conflicts with other mods where 1.0.2 did not.

More specifically myself @XOC2008 and @SpannerMonkey(smce) all have an issue with disappearing SM Armory parts among other things that 1.0.2 left alone

edit

And apparently adding in the missing parts as noted above (while deleting the old ones) from 1.0.2-5 into 1.0.2 is working. I suspect there must be a patch file somewhere doing something obtuse.

 

So LLL 1.0.2-beta for 1.2 is working with SM Armory and 1.0.2.5-beta causes errors?

Can you give me info about SM Armory version/ link and a log file of the LLL 1.0.2.5-beta with your armory version activated? I will have a look into it.

I'm sorry for that, but i never used SM Armory, so i couldn't notice problems with that. I tried LLL with 100+ mods in my game folder , but SM Armory was not in my view.  

Edited February 23, 2017 by LeLeon

[V8jester]

Just now, LeLeon said:

 

So LLL 1.0.2-beta for 1.2 is working with SM Armory and 1.0.2.5-beta causes errors?

Can you give me info about SM Armory version/ link and a log file of the LLL 1.0.2.5-beta with your armory version activated? I will have a look into it.

@SpannerMonkey(smce) - Wanna chime in on this one, with some of what we have been talking about?

[LeLeon]

2 minutes ago, V8jester said:

@SpannerMonkey(smce) - Wanna chime in on this one, with some of what we have been talking about?

oh and perhaps a SM Armory part name, what is missing/ causing problem with a LLL part while using. Makes it easier to find something about.

[GhostboyDB]

the hatch isnt showing up in the part list for me because the files for the hatch door don't have a .mu file

 

Edited March 5, 2017 by GhostboyDB

[LeLeon]

On 5.3.2017 at 7:38 PM, GhostboyDB said:

the hatch isnt showing up in the part list for me because the files for the hatch door don't have a .mu file

 

hatches have "obstructed" error, can't be used to leave a ship.

[steedcrugeon]

[OmegaForce]

On 2/22/2017 at 8:11 PM, LeLeon said:

oh and perhaps a SM Armory part name, what is missing/ causing problem with a LLL part while using. Makes it easier to find something about.

I had similar issues and the only LLL parts I added were the generators. This caused one of the armor panels from SM Armory to disappear.

[steedcrugeon]

[linuxgurugamer]

@steedcrugeon Looking good

[steedcrugeon]

18 hours ago, linuxgurugamer said:

@steedcrugeon Looking good

Thanks, it's a bit hit and miss with getting things to line up and Props are a ways down the line yet. I am recycling Lack's original textures to have the parts in keeping, and it also saves some time (texturing takes ages!)

[Potato3478]

I hope this gets updated to 1.3 soon!

[Tw1]

Hi there. This thread seems quiet compared to the old days.

I have an issue. I'm using the airlock part, but I've got this problem where the part only shows up when I re-load the database, meaning any vessel with it on it won't load when I first boot the game.

Here is a file containing the offending part, and KSP logs, with just LLL and the squad folder.

In this, I loaded, opened the editor, reloaded the database, then went back to editor:

https://drive.google.com/drive/folders/0B1vN0EZA5Ez4dUJnci1WQTkydnM?usp=sharing

Any advice much appreciated.

[steedcrugeon]

13 hours ago, Tw1 said:

I have an issue. I'm using the airlock part, but I've got this problem where the part only shows up when I re-load the database, meaning any vessel with it on it won't load when I first boot the game.

Have you considered this:

Quote

Notes

If you're not using tweakscale, most of the larger parts can be re-enabled by deleting 'GameData/LLL/LLL_PartDisableLargerSizes.cfg'

Other parts are found in 'GameData/LLL/LLL_PartDisabler.cfg'

You can either delete those files, or open them up and remove bit relating to the part you want. I've tried to keep it documented, so it's split into sections like '// ----- Additional Cockpits -----'

which is in the first post, as possibly being the cause of the problem you are seeing?

[Tw1]

13 hours ago, steedcrugeon said:

Have you considered this:

which is in the first post, as possibly being the cause of the problem you are seeing?

I looked through both, but the part in question was not listed in either one, so I presumed that it was not likely the cause of this issue. 

Tested it without them now, and the issue persists. 

It still doesn't load first time. 

Edited July 13, 2017 by Tw1

[The-Doctor]

Is a 1.3 version in the works?

[steedcrugeon]

11 hours ago, The-Doctor said:

Is a 1.3 version in the works?

the current LLL version works with 1.3

[Kerbinidiel]

hi, i loved the LLL mod and yes, the current version works in KSP 1.3.0

but, there is one part not working correctly:

the "Lack's HE-30 Hull extender Walkway, 1.25m" are blocked... like an invisible wall and your kerbal is not able to passing trough

20171007173259_1 by Rusty B., su Flickr

 

the "Anthea HE-50 Walkway, Open" works fine and your kerbal can walk trough

20171007173350_1 by Rusty B., su Flickr

 

i tryed to look inside the config of each other parts or find the diference and try to understand why the He-30 not works... but i not find the config of anyone of theese parts.... can someone help me?

Edited October 7, 2017 by Kerbinidiel

[steedcrugeon]

On ‎07‎/‎10‎/‎2017 at 4:46 PM, Kerbinidiel said:

hi, i loved the LLL mod and yes, the current version works in KSP 1.3.0

but, there is one part not working correctly:

- ( SNIP ) -

I suspect this is a result of a collider error. The square walkway (HE-50) is very easy to make a hollow collider for but the round one is a bit more tricky. It requires slightly more careful collider placement and is a little bit more difficult when using only Blender tools to re-do. needs to be run through Unity again but that does require re-aligning the UV map again. Quite a few little issue, just time consuming. it may well be fixed when this gets its next 'update'.

[Kerbinidiel]

2 minutes ago, steedcrugeon said:

I suspect this is a result of a collider error. The square walkway (HE-50) is very easy to make a hollow collider for but the round one is a bit more tricky. It requires slightly more careful collider placement and is a little bit more difficult when using only Blender tools to re-do. needs to be run through Unity again but that does require re-aligning the UV map again. Quite a few little issue, just time consuming. it may well be fixed when this gets its next 'update'.

thanks! i love this part a lot

[TimberWolffe]

so glad to know this works in 1.3

[DiscoveryPlanet]

On 11/13/2017 at 7:43 PM, TimberWolffe said:

so glad to know this works in 1.3

is it works in ksp 1.3.1 too??

[TimberWolffe]

25 minutes ago, DiscoveryPlanet said:

is it works in ksp 1.3.1 too??

I haven't had any issues so far, 1.3 and 1.3.1 aren't really different enough for a parts pack to break

[Brainpop14]

Does anyone have full confirmation that this works reliably in 1.3.1 yet?

[steedcrugeon]

Its just parts pack, there are no clever plugins for LLL so it should behave in 1.3.1 without any issues. The only thing I can see is it won't have localization support.

[Polaris111]

On 1/23/2018 at 3:20 PM, Brainpop14 said:

Does anyone have full confirmation that this works reliably in 1.3.1 yet?

I've been using LLL in 1.3.1 and so far cockpits, engines, and RCS work, but fuel tanks don't work at all. I suspect that it has something to do with the fuel switching thing, but for the moment if you plan on using LLL in 1.3.1 be prepared to have to use other fuel tanks entirely, or offset them into LLL cargo bays to retain the boxy look of LLL ships. Other than that, I haven't found any issues.