harrisjosh2711 Posted August 4, 2017 Author Share Posted August 4, 2017 3 hours ago, Jasseji said: Could you move the Seats a bit back in the meantime and get me an updated IVA-Frame ? Yes, I can do that. Also, the problem with the re-scale is the interior doesn't scale with the pod. If it wasn't for that I would re-scale it. It was a design decision, cant go back now. Maybe ill make that new one I was talking about? Link to comment Share on other sites More sharing options...
harrisjosh2711 Posted August 4, 2017 Author Share Posted August 4, 2017 Just released a pre-release download for the new command pod at the request of @Bottle Rocketeer 500. Follow the GitHub link on the first page. Anyone who uses it PM me some feedback if you find anything that needs balancing. Link to comment Share on other sites More sharing options...
harrisjosh2711 Posted August 4, 2017 Author Share Posted August 4, 2017 (edited) Model of a new extension I'm considering for the ITS "Titan".(The engines are a separate piece) Edited August 4, 2017 by harrisjosh2711 Link to comment Share on other sites More sharing options...
harrisjosh2711 Posted August 4, 2017 Author Share Posted August 4, 2017 Spent a few minutes to start working on a proper front page photo. I need another vehicle to fill the right hand side. My instinct tells me a Dragon pod because it is Kerbalized SpaceX up in here. Link to comment Share on other sites More sharing options...
Jasseji Posted August 4, 2017 Share Posted August 4, 2017 (edited) 4 hours ago, harrisjosh2711 said: Yes, I can do that. Also, the problem with the re-scale is the interior doesn't scale with the pod. If it wasn't for that I would re-scale it. It was a design decision, cant go back now. Maybe ill make that new one I was talking about? hm, OK, just leave the main pod without the top part so everyone can rescale I'm setting up Unity - need to find all the latest Part Tools etc The ITS is looking good Edit: the download contains the RCS changes already or not ? Edited August 4, 2017 by Jasseji Link to comment Share on other sites More sharing options...
harrisjosh2711 Posted August 4, 2017 Author Share Posted August 4, 2017 @Jasseji Thanks! Cool! I will try and get those seats moved back by tomorrow. Once I get in there ill likely want to do a little sprucing up as well. I have been trying to work more on the stuff that isn't done. I would still like to do a lot of work on the dragon V2. Like I said, maybe even make another one. Link to comment Share on other sites More sharing options...
Jasseji Posted August 4, 2017 Share Posted August 4, 2017 Ok, waiting for your Changes, i have Unity set up: Link to comment Share on other sites More sharing options...
Bottle Rocketeer 500 Posted August 4, 2017 Share Posted August 4, 2017 (edited) @harrisjosh2711 Look what I made for this mod(Hyperedit used for teleporting the Dragon to Eeloo): Edited August 4, 2017 by Bottle Rocketeer 500 Link to comment Share on other sites More sharing options...
harrisjosh2711 Posted August 4, 2017 Author Share Posted August 4, 2017 @Bottle Rocketeer 500 Cool! PM me a link or something I might use it. Link to comment Share on other sites More sharing options...
harrisjosh2711 Posted August 4, 2017 Author Share Posted August 4, 2017 @Jasseji I'm working on the interior(wanted to get some things done before you did ur thing). Jebidiah and his comrade in the second pilot seat can now see out the windows. I also need to fix the windows. I changed them slightly vs. what I did with the exterior so you can see the outer rim of the exteriors. I will get you a link when I'm complete. I have some things to do today so I'm not 100% positive when that will be. I'm going to have to do some testing with the seat transforms and windows. Link to comment Share on other sites More sharing options...
Jasseji Posted August 4, 2017 Share Posted August 4, 2017 1 hour ago, harrisjosh2711 said: @Jasseji I'm working on the interior(wanted to get some things done before you did ur thing). Jebidiah and his comrade in the second pilot seat can now see out the windows. I also need to fix the windows. I changed them slightly vs. what I did with the exterior so you can see the outer rim of the exteriors. I will get you a link when I'm complete. I have some things to do today so I'm not 100% positive when that will be. I'm going to have to do some testing with the seat transforms and windows. ok, can you make sure to keep the "desk" clean where the instruments would be ? now there is a weird picture and i'd hate to be forced to add some prop just to cover it I have prepared a mock-up layout just for fun, will set up something i can just snap in with quick re-positions (basically it's part of the ALCOR IVA repositioned and with added stuff) Link to comment Share on other sites More sharing options...
harrisjosh2711 Posted August 5, 2017 Author Share Posted August 5, 2017 @Jasseji I have the files ready to go but I did not remove the texture on the board. I exported before I seen that message, sorry. You will have to make the props blend in around it if you want it tonight, I could probably get back in tomorrow and do something. I'm working on the next pod tonight. Link to comment Share on other sites More sharing options...
harrisjosh2711 Posted August 5, 2017 Author Share Posted August 5, 2017 How far I got today. Link to comment Share on other sites More sharing options...
harrisjosh2711 Posted August 7, 2017 Author Share Posted August 7, 2017 (edited) Here it is guys. I'm going to play around in game tonight and get the cfg's prepared and drop a release for the three pods. Edited August 7, 2017 by harrisjosh2711 Link to comment Share on other sites More sharing options...
RaiderMan Posted August 7, 2017 Share Posted August 7, 2017 I seem to have a problem with the I and K translation controls as they relate to the rcs system. the I and K controls do nothing. is this a bug or was this a design limitation? Link to comment Share on other sites More sharing options...
harrisjosh2711 Posted August 7, 2017 Author Share Posted August 7, 2017 6 minutes ago, RaiderMan said: I seem to have a problem with the I and K translation controls as they relate to the rcs system. the I and K controls do nothing. is this a bug or was this a design limitation? It was meant to be a design limitation. Although, I plan on tweaking the thrusters at some point. They do work in the I and K just slightly. It can be difficult but it will get you there. I'm going to admit its not something a newbie would be able to control. Link to comment Share on other sites More sharing options...
RaiderMan Posted August 7, 2017 Share Posted August 7, 2017 (edited) I also ended up slapping parachutes on her, the capsule wasnt really friendly to the parachutes, kept having it pop out and curve when moving the chutes to position them, then again this is a rather oddly sloped and contoured design, so thats more likely than not the design. I freely admit my first foray into powered descent landings...did not go well XD. I was too heavy on the throttle, then too light, and finally commenced a head long back end first crash into the ground Edited August 7, 2017 by RaiderMan Link to comment Share on other sites More sharing options...
harrisjosh2711 Posted August 7, 2017 Author Share Posted August 7, 2017 1 hour ago, RaiderMan said: I also ended up slapping parachutes on her, the capsule wasnt really friendly to the parachutes, kept having it pop out and curve when moving the chutes to position them, then again this is a rather oddly sloped and contoured design, so thats more likely than not the design. I freely admit my first foray into powered descent landings...did not go well XD. I was too heavy on the throttle, then too light, and finally commenced a head long back end first crash into the ground The engines have a very high TWR use the thrust limiter if you have to. I don't, but it would help. The safest way I have found to do it is use KE under Vessel you will see suicide burn distance when that number reaches between 0-100m gas it full throttle until you slow somewhere to around 40ms. Throttle down until your holding a pretty steady momentum around 20ms. Right before you hit the ground throttle up, not all the way, just hit slower than 20 and you will be ok. Ill check that chute thing out. On the other hand the RCS on the new dragon1 is working great! Link to comment Share on other sites More sharing options...
harrisjosh2711 Posted August 7, 2017 Author Share Posted August 7, 2017 1 hour ago, RaiderMan said: I also ended up slapping parachutes on her, the capsule wasnt really friendly to the parachutes, kept having it pop out and curve when moving the chutes to position them, then again this is a rather oddly sloped and contoured design, so thats more likely than not the design. I freely admit my first foray into powered descent landings...did not go well XD. I was too heavy on the throttle, then too light, and finally commenced a head long back end first crash into the ground Seems rather friendly to me. Link to comment Share on other sites More sharing options...
ChickenBot448 Posted August 7, 2017 Share Posted August 7, 2017 2 hours ago, harrisjosh2711 said: Here it is guys. I'm going to play around in game tonight and get the cfg's prepared and drop a release for the three pods. Sweet, this picture looks amazing. Can't wait for the update! Link to comment Share on other sites More sharing options...
harrisjosh2711 Posted August 7, 2017 Author Share Posted August 7, 2017 New Upload is out. I am creating it as a new mod on spacedock so if you are following me there you may want to switch over to the new mod as I will be abandoning the old one. Link to comment Share on other sites More sharing options...
RaiderMan Posted August 7, 2017 Share Posted August 7, 2017 by that I mean I had the 'bubble' phenomenon, as well as some sinking at times. I did ultimately get the parachutes on. so, new version's out? what are the names of the capsules, aside from dragon2, so I can use the in game part search tool? Link to comment Share on other sites More sharing options...
The-Doctor Posted August 7, 2017 Share Posted August 7, 2017 Looks slick, any imgur folder of pics? Link to comment Share on other sites More sharing options...
harrisjosh2711 Posted August 7, 2017 Author Share Posted August 7, 2017 (edited) 4 hours ago, The-Doctor said: Looks slick, any imgur folder of pics? You can check out my flickr album. https://www.flickr.com/photos/155947249@N03/ 4 hours ago, RaiderMan said: by that I mean I had the 'bubble' phenomenon, as well as some sinking at times. I did ultimately get the parachutes on. so, new version's out? what are the names of the capsules, aside from dragon2, so I can use the in game part search tool? If you don't mind, what is the bubble phenomenon? Could you post a picture? The names are- DPD "DragonV1", DPD-1A "DragonV2", ITS "Titan" Edited August 7, 2017 by harrisjosh2711 Link to comment Share on other sites More sharing options...
RaiderMan Posted August 7, 2017 Share Posted August 7, 2017 yeah..gimme a tick. have to load up the CSM model I was arguing with last night. mid remote controlled radio telescope build XD Link to comment Share on other sites More sharing options...
Recommended Posts