Poodmund Posted August 30, 2018 Share Posted August 30, 2018 10 minutes ago, linuxgurugamer said: 1. Yes, being worked on. Since you mentioned it, do you think having it be configurable for both the editor and in flight would be useful? 2. This only deals with perfect orbits. If grabbing current parameters, how would you suggest it be done? Get the Ap? the Pe? An average? I suppose I could do that, but again, this is designed with a perfect circular orbit in mind. I thought about this, and didn't want to have to start calculating a circulization maneuver. I can see that becoming just a bit hairy. 1. Well, personally, I would prefer to view the black variant at all times even in the editor. That's personal preference though so I'd probably refer to some feedback from the community. 2. Well you could grab the SMA and Eccentricity of the vessel and that should give you the current Ap and Pe (ignoring any other parameters such as Inc. and Arg. of Pe). Hmmmm... I mean, its probably only meaningful if you decide you want to go the whole hog here but you'd almost just be replicating MechJeb's Resonant Orbit function but your tool would be pre-calculating the resonance required for the number of sats in the network. It'd be a fair bit of work. Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted August 30, 2018 Author Share Posted August 30, 2018 14 minutes ago, Poodmund said: Well you could grab the SMA and Eccentricity of the vessel and that should give you the current Ap and Pe (ignoring any other parameters such as Inc. and Arg. of Pe). Hmmmm... I mean, its probably only meaningful if you decide you want to go the whole hog here but you'd almost just be replicating MechJeb's Resonant Orbit function but your tool would be pre-calculating the resonance required for the number of sats in the network. It'd be a fair bit of work. If I grab the current orbit, I will only grab a single number ( Ap, Pe, or average) and assume it to be circular. Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted August 30, 2018 Author Share Posted August 30, 2018 Thinking about it, I think I can get some code from GravityTurn which will do most of what I would need to both do the maneuver and to set the maneuver node AND to tell mechjeb to execute it. so it's not a lost cause The background is actually the SOI, if you zoom out with the orbit, eventually you will see it change. Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted August 31, 2018 Author Share Posted August 31, 2018 15 hours ago, linuxgurugamer said: Thinking about it, I think I can get some code from GravityTurn which will do most of what I would need to both do the maneuver and to set the maneuver node AND to tell mechjeb to execute it. so it's not a lost cause The background is actually the SOI, if you zoom out with the orbit, eventually you will see it change. Just an update: I've added settings for the SOI color in both the editor and flight I've added buttons to grab either the current Pe or Ap from the active vessel when in flight I'm working on the code to perform a maneuver at the selected Pe/Ap to get into the desired orbit. Once that's done, I'll probably add what's needed to have MechJeb perform the maneuver. To do this, I've copied the minimal amount of code from both MechJeb and GravityTurn. Hard to say when I'll get this done, I'm shooting for tomorrow evening, but have a lot to do outside of this. Quote Link to comment Share on other sites More sharing options...
Poodmund Posted August 31, 2018 Share Posted August 31, 2018 Sounding good. Will the MechJeb button only be available if MechJeb is installed? Quote Link to comment Share on other sites More sharing options...
Zhetaan Posted August 31, 2018 Share Posted August 31, 2018 (edited) On 8/30/2018 at 9:28 AM, eberkain said: I've seen people refer to using matlab, which this looks like a plugin for that. I've never took the time to learn how to use it because it looks so intimidating, I want a for-dummies version where I can just plugin my destination and the gravity assist body and then have it calculate a launch window. Yes, but ... which window? The problem you encounter is that there are too many variables. You have to consider not only your destination and the assisting body, but also the time of departure, duration of flight, initial delta-V expenditure, braking delta-V expenditure, and provisions for return--which may not be for years if you need an assist to get back. Seeking a path to orbital synchronicity between satellites that have the exact same major orbital characteristics (the only real difference being the time of periapsis passage) is easy compared to seeking something similar from at least three different celestial bodies that not only move at different speeds and directions, but also effect changes to your flight path merely by existing. On 8/30/2018 at 11:36 AM, linuxgurugamer said: I looked (briefly) into the FlybyFinder with an eye towards making it a native mod. But it's written in what appears to be a form of Pascal, which isn't a killer, but then looking at the instructions on how to use it just made me shudder Heh. FlybyFinder can be a powerful tool, but it is emphatically not intuitive. It's gotten me out of some otherwise impossible situations, but I don't even want to guess at what kind of evil voodoo you'd need to resort to doing to make it work in-game. However, and in the interests of keeping something on topic, I do have a more functional observation: on the subject of things that involve both fantastically non-intuitive calculations and resonant orbits, I often plan my satellite networks using multiple independent craft. Normally, this is for reasons of utility: I sent a scanner to the Mun; now that the scan is done, I can re-purpose it into a relay. Alternatively, I send up my Kerbin relays early in career when I don't have the money or the engines to launch a complicated tri- or quad-payload and instead must resort to sending one relay at a time. To synchronise these, I find the phase angle and take the difference I need to get 120° separation (I prefer trigonal planar networks). That usually necessitates calculating resonant orbits with obnoxious ratios such as 477/360 and other, similar fun. Would it be possible for this plugin to give an orbit based on the desired resonance rather than the number of satellites in a regular polygon? Edited August 31, 2018 by Zhetaan Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted August 31, 2018 Author Share Posted August 31, 2018 28 minutes ago, Zhetaan said: Heh. FlybyFinder can be a powerful tool, but it is emphatically not intuitive. It's gotten me out of some otherwise impossible situations, but I don't even want to guess at what kind of evil voodoo you'd need to resort to doing to make it work in-game Making it work (ie. Rewriting it in c#) isn't difficult. But making it easy to use is. 30 minutes ago, Zhetaan said: Would it be possible for this plugin to give an orbit based on the desired resonance rather than the number of satellites in a regular polygon No, sorry. Too far out of scope. Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted August 31, 2018 Author Share Posted August 31, 2018 4 hours ago, Poodmund said: Sounding good. Will the MechJeb button only be available if MechJeb is installed? Yes Quote Link to comment Share on other sites More sharing options...
Wyzard Posted September 1, 2018 Share Posted September 1, 2018 11 hours ago, Zhetaan said: Alternatively, I send up my Kerbin relays early in career when I don't have the money or the engines to launch a complicated tri- or quad-payload and instead must resort to sending one relay at a time. To synchronise these, I find the phase angle and take the difference I need to get 120° separation (I prefer trigonal planar networks). That usually necessitates calculating resonant orbits with obnoxious ratios such as 477/360 and other, similar fun. I've set up networks with the satellites launched separately, and the way I got them synchronized was to make the new satellite do a close flyby of the old one (just like you'd do for a docking rendezvous), at which point the phase angle is zero, and then use the synchronous orbit calculator in the normal way to go from zero to 120° separation. No weird ratios needed. Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted September 1, 2018 Author Share Posted September 1, 2018 (edited) New release, 0.0.2 Added configurable SOI color for editor and flight (two colors, white and dark grey) Added alternate skin Added buttons to get current vessel's Pe or Ap while in flight scene Added button to create maneuver node. All pre-existing maneuver nodes will be removed Added Mechjeb integration Added button to call Mechjeb to execute maneuver node, button will be red if Pe is below the atmosphere limit Added button to clear all maneuver nodes Added Kerbal Alarm Clock integration Added button to add alarms for the orbital maneuver (if Mechjeb not installed) and for each subsequent satellite seperation Added hiding of window when UI is hidden (F2) Added optional hiding of window when game is paused I've also updated the OP Edited September 1, 2018 by linuxgurugamer Quote Link to comment Share on other sites More sharing options...
4x4cheesecake Posted September 1, 2018 Share Posted September 1, 2018 53 minutes ago, linuxgurugamer said: Added Kerbal Alarm Clock integration This one in particular is really useful, thanks Quote Link to comment Share on other sites More sharing options...
Cooper42 Posted September 2, 2018 Share Posted September 2, 2018 Really useful mod, thanks. This should certainly be a recommended mod for RemoteTech. As you are planning on adding antenna info, a “stable max range”. The other thing that “Visual RemoteTech Planner” https://ryohpops.github.io/kspRemoteTechPlanner/ does is calculate night time period and battery power required. This would be a really useful addition in the VAB, if that’s at all possible. Quote Link to comment Share on other sites More sharing options...
JH4C Posted September 2, 2018 Share Posted September 2, 2018 (edited) 1 hour ago, Cooper42 said: As you are planning on adding antenna info, a “stable max range”. The other thing that “Visual RemoteTech Planner” https://ryohpops.github.io/kspRemoteTechPlanner/ does is calculate night time period and battery power required. This would be a really useful addition in the VAB, if that’s at all possible. There's already mods that allow calculation of antenna strength/coverage, and power consumption through orbital shadows (one of which is maintained by LGG already); knowing LGG's usual stance, I suspect he'll simply suggest you try using those, rather than duplicate them in this mod. Check them out, maybe they'll do exactly what you need? Edited September 2, 2018 by JH4C Quote Link to comment Share on other sites More sharing options...
4x4cheesecake Posted September 2, 2018 Share Posted September 2, 2018 On 9/1/2018 at 10:46 PM, linuxgurugamer said: Added button to clear all maneuver nodes This one is bugged. The actual maneuver will be removed but the patched conic and the maneuver node symbol will remain (the symbol will 'float' and moves around when moving the camera). The symbol even persists after switching to the main menu. Tested in KSP 1.4.5 in my regular install and a clean install. I should mention, that there is no log entry for deleting the node but there is one for creating it. Nothing else to mention in the log, but I've uploaded it for you anyway: https://www.dropbox.com/s/0nhsgciymfnnuaf/output_log(ROC).txt?dl=0 (I've typed 'The node is already deleted but there is no log entry' into the console to mark the spot in the log^^) Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted September 2, 2018 Author Share Posted September 2, 2018 38 minutes ago, 4x4cheesecake said: This one is bugged. The actual maneuver will be removed but the patched conic and the maneuver node symbol will remain (the symbol will 'float' and moves around when moving the camera). The symbol even persists after switching to the main menu. Tested in KSP 1.4.5 in my regular install and a clean install. I should mention, that there is no log entry for deleting the node but there is one for creating it. Nothing else to mention in the log, but I've uploaded it for you anyway: https://www.dropbox.com/s/0nhsgciymfnnuaf/output_log(ROC).txt?dl=0 (I've typed 'The node is already deleted but there is no log entry' into the console to mark the spot in the log^^) I'll look at it, it might need to wait a few days, I'm on a vacation right now. I'll dig into it later this evening, I think I know what's going on Quote Link to comment Share on other sites More sharing options...
4x4cheesecake Posted September 2, 2018 Share Posted September 2, 2018 3 minutes ago, linuxgurugamer said: I'll look at it, it might need to wait a few days, I'm on a vacation right now. I'll dig into it later this evening, I think I know what's going on I have some other code to compare, maybe I'll find a solution before you do Ok, probably not and right now I'm working on a more subtile issue of precise maneuver but this is fun Quote Link to comment Share on other sites More sharing options...
4x4cheesecake Posted September 3, 2018 Share Posted September 3, 2018 (edited) @linuxgurugamer I found a solution, how about you? if (GUILayout.Button("Clear all nodes")) { for (int i = FlightGlobals.ActiveVessel.patchedConicSolver.maneuverNodes.Count - 1; i >= 0 ; i--) { FlightGlobals.ActiveVessel.patchedConicSolver.maneuverNodes[i].RemoveSelf(); } } The loop will adress all maneuver nodes of the active vessel and deletes all of them (beginning with the latest node) Maybe you will find a better solution but it works for me so far edit: If you are interested: I've also edited a minor detail in the alarm creation for KAC. The way you do it (and precise maneuver as well) will end in these alarm details: 'Time to Alarm' and 'Time to Event' are the same and both are 1 minute ahead of the actual node. But by adding a alarm margin of 1 minute, the result become a little bit more accurate: Now, 'Time to Alarm' is 1 minute ahead of the node AND the 'Time to Event'. Like I said, it is just a minor detail and 2 (identical) lines of additional code, but if you don't mind, I would open a PR for both changes (delete all nodes & alarm timings) Edited September 3, 2018 by 4x4cheesecake Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted September 3, 2018 Author Share Posted September 3, 2018 35 minutes ago, 4x4cheesecake said: I found a solution, how about you? if (GUILayout.Button("Clear all nodes")) { for (int i = FlightGlobals.ActiveVessel.patchedConicSolver.maneuverNodes.Count - 1; i >= 0 ; i--) { FlightGlobals.ActiveVessel.patchedConicSolver.maneuverNodes[i].RemoveSelf(); } } The loop will adress all maneuver nodes of the active vessel and deletes all of them (beginning with the latest node) Same solution I have, I got it from MechJeb. 37 minutes ago, 4x4cheesecake said: Now, 'Time to Alarm' is 1 minute ahead of the node AND the 'Time to Event'. Like I said, it is just a minor detail and 2 (identical) lines of additional code, but if you don't mind, I would open a PR for both changes (delete all nodes & alarm timings) Do the PR, I'll look for it in a few mintues Thanks Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted September 3, 2018 Author Share Posted September 3, 2018 New release, 0.0.2.1: Thanks to @4x4cheesecake for these two fixes: Maneuver nodes are deleted properly, Added an alarm margin to show correct timings in the alarm details Quote Link to comment Share on other sites More sharing options...
ToneStack Posted September 3, 2018 Share Posted September 3, 2018 (edited) On 8/25/2018 at 9:15 AM, zer0Kerbal said: but what day and time is it on the Mun? ;p If you use the 12 days of Christmas song; eternal Christmas on the moon. Is Day 8 Year 51 according to Moon time so 08/51 a little before 6pm at the point of the moon where earth is nearly overhead. Using the same convention as Lunar standard time; time is unknown on the Mun until the first kerbal lands on it; that moment time starts Edited September 3, 2018 by ToneStack Quote Link to comment Share on other sites More sharing options...
zer0Kerbal Posted September 3, 2018 Share Posted September 3, 2018 (edited) Edited September 4, 2018 by zer0Kerbal Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted September 4, 2018 Author Share Posted September 4, 2018 8 hours ago, zer0Kerbal said: hmm... so essentially the Mun doesn't exist until a Kerbal steps on it, but how can a Kerbal step onto it if it doesn't exist. ;p Let's not sidetrack this thread, please. If you want to talk nonsense, move to another forum. Quote Link to comment Share on other sites More sharing options...
Rolan Posted September 7, 2018 Share Posted September 7, 2018 (edited) Looks like an awesome mod. I will try it soon. How much work to make the satellite orbit time the field to set? I like to have the satellite period be 12 hours, say. The transfer orbit would then be 16 hours for 3 satellites, 15 hours for 4, 14 hours for 6, etc. With RCS, I can get my orbits to within a fraction of a second of these values. RolanCCC Edited September 7, 2018 by Rolan Typo Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted September 7, 2018 Author Share Posted September 7, 2018 6 hours ago, Rolan said: Looks like an awesome mod. I will try it soon. How much work to make the satellite orbit time the field to set? I like to have the satellite period be 12 hours, say. The transfer orbit would then be 16 hours for 3 satellites, 15 hours for 4, 14 hours for 6, etc. With RCS, I can get my orbits to within a fraction of a second of these values. RolanCCC So rather than setting the orbit altitude, you want to set the orbital period? shouldnt be that hard, I just need t9 find the calculations for determining the altitde from thhe period Quote Link to comment Share on other sites More sharing options...
Wyzard Posted September 7, 2018 Share Posted September 7, 2018 37 minutes ago, linuxgurugamer said: shouldnt be that hard, I just need t9 find the calculations for determining the altitde from thhe period This sounds related to something I was thinking about yesterday: I'd like to put a ring of relay satellites in solar orbit, probably between Duna and Dres. Since they'd be coming from Kerbin which is also in solar orbit, instead of raising and lowering the Ap to position the satellites, it'd make more sense to just wait until Kerbin is aligned correctly to send each satellite directly to where it belongs. I haven't worked through the details yet, but I think it just involves calculating period of my target orbit, comparing against Kerbin's orbital period to find their relative angular speed, and then waiting for 120° of relative separation (or whatever angle, based on the desired number of satellites) before sending the next satellite to the solar orbit. That's sort of a special case, very different from what this tool currently does, and it's probably out of scope for this mod. I don't mind just doing the math myself. But it's something to consider, in case you can think of a good way to add it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.