Jump to content

[1.8.1-1] [PLEASE FORK ME] Kopernicus & KittopiaTech

Thomas P.

By Thomas P.
in KSP1 Mod Releases

 Share

Recommended Posts

Sigma88

Sigma88

Posted
Posted
12 hours ago, Galileo said:

their rotation will be reset afaik. So it will be like starting a new career

no, planet position is calculated using the time of the game "universe".

so if you install a planet pack and load a game saved at Year 50  you will get the planets in the same position you would get if you had load a new save (Year 1) and timewarped to Year 50

Link to comment
Share on other sites
TheDog

TheDog

Posted
Posted
18 hours ago, Padishar said:

I would be very interested to see what MemGraph has to say about it (and about how much memory taskmanager says KSP is using in total).  Can you try it in the "all mods + kopernicus" and "all mods - kopernicus" setups?  Just go to the space center and leave it running for at least a couple of minutes and then take a screenshot of the graph window...

 

Ok, hope this is what you are looking for: http://imgur.com/a/IQJjN

Taskmanager & windows resource monitor report:

1) all mods -Kopernicus/OPM: resmon: commit size 5,637,336 KB;    taskmanager: 3,735 KB

2) all mods +Kopernicus/OPM: resmon: commit size 5,579,212 KB;    taskmanager: 4,265 KB

 

Btw, so far I havent been able to identify any meaningful combination of mods causing this sharp drop in FPS. I am very inclined to blame this onto the fact that I am hitting a certain limit (maybe video memory, my gtx960M has 2MB only), and then it degrades (like each mod is adding a small bucket of water into a 2L canister, and at one point there is an overflow, without it being any specific mod's fault...). Already using d3d11 btw, might also try with glcore.

 

Link to comment
Share on other sites
Padishar

Padishar

Posted
Posted
1 hour ago, TheDog said:

Ok, hope this is what you are looking for

Yep, that looks pretty much as it should.  The only slightly worrying thing is that with Kopernicus/OPM the Mono heap is 200 meg larger.  I would've expected most of the memory usage to be in additional textures loaded outside of Mono.

1 hour ago, TheDog said:

Btw, so far I havent been able to identify any meaningful combination of mods causing this sharp drop in FPS. I am very inclined to blame this onto the fact that I am hitting a certain limit (maybe video memory, my gtx960M has 2MB only), and then it degrades (like each mod is adding a small bucket of water into a 2L canister, and at one point there is an overflow, without it being any specific mod's fault...). Already using d3d11 btw, might also try with glcore.

It just be overload of some kind, that is a lot of mods.  There are various programs that should be able to tell you how much of your video card's memory is being used.  If it has to start shuffling textures to the card on every frame that could explain it.  Perhaps try switching the texture resolution down to minimum as a test?

Link to comment
Share on other sites
TheDog

TheDog

Posted
Posted
39 minutes ago, Padishar said:

Yep, that looks pretty much as it should.  The only slightly worrying thing is that with Kopernicus/OPM the Mono heap is 200 meg larger.  I would've expected most of the memory usage to be in additional textures loaded outside of Mono.

It just be overload of some kind, that is a lot of mods.  There are various programs that should be able to tell you how much of your video card's memory is being used.  If it has to start shuffling textures to the card on every frame that could explain it.  Perhaps try switching the texture resolution down to minimum as a test?

I cannot solve this mystery... :-(

  • with half-res textures (all mods +Kopernicus/OPM): no change, 30 FPS
  • with glcore instead of d3d11: no change, 30 FPS
  • removed only MFI (but left in Kopernicus/OPM, which doesnt work of course, but all the assets etc are loaded): 90 FPS

I give up... Anyway I need to/want to play with OPM, so 30 FPS it be then...

Thanks for all support & suggestions though!!

Link to comment
Share on other sites
The White Guardian

The White Guardian

Posted
Posted

Excuse me for this, but I'm going to voice my concern for the Kopernicus Creativity Marathon. It's been deadly silent there for months, I actually wonder if it's still being worked on. I already asked over there two weeks ago, but it seems as if the poor thread has been cast into oblivion. Therefore my question, is the KCM still alive? It'd be a shame to see such a creative idea go to waste.

Link to comment
Share on other sites
SmashingKirby148

SmashingKirby148

Posted
Posted

Ok, so my OPM support patch for EveRevamp works, but for JoolSystemTweaks it keeps Eeloo in orbit around Sarnus, with it's new texture from Sarnus, BUT remains the orbit I gave it for Jool.
Vall, on the other hand, got COMPLETELY messed up. It orbits the sun. INSIDE the sun. -2,000,000m INSIDE THE SUN. Can anyone take a look at this config and guess what's wrong? 

@Kopernicus:AFTER[Kopernicus]:NEEDS[OPM]
{
	@Body[Eeloo]
    {
		Debug
		{
			exportMesh = true
			update = true
		}
		cacheFile = JoolSystemTweaks/Cache/Eeloo.bin		
        @Properties
        {
			description = Eeloo was one of the last Moons of Jool to be discovered. Frustrated scientists kept trying to wipe it off the lenses of their telescopes. Eventually after a rash of returned telescopes, Advanced Optics Co. finally decided to just tell them it was an actual object in the sky.
			tidallyLocked = True
        }
        @Orbit
        {
            @referenceBody = Jool
			semiMajorAxis = 59184000
			inclination = 1.5
            eccentricity = 0.02
			longitudeOfAscendingNode = 55
        }	
    }	
	@Body[Vall]
    {
		Debug
		{
			exportMesh = true
			update = true
		}
		cacheFile = JoolSystemTweaks/Cache/Vall.bin		
        @Properties
        {
			description = Discovered at the same time as Plock, the square heads in charge of cataloging the astronomical discoveries mixed up the records of two celestial bodies, leading to years of one being confused for the other. The surface of Vall is covered in vast mountains. It is hypothosised that the moon harbors a liquid ocean beneath its frozen crust.
			tidallyLocked = True
			@ScienceValues
			{
				landedDataValue = 11
				inSpaceLowDataValue = 10
				inSpaceHighDataValue = 9.5
				recoveryValue = 10
			}
        }
        @Orbit
        {
            @referenceBody = Sarnus
			semiMajorAxis = 19105978
			inclination = 2.3
            eccentricity = 0.0034
			longitudeOfAscendingNode = 55
        }
	}
}

Some of the lines got offset when I pasted. -.-;

Link to comment
Share on other sites
The White Guardian

The White Guardian

Posted
Posted

@SmashingKirby148 Are you sure it loads after OPM itself? Could be that it simply can't find 'Sarnus' yet.

Also, what do you mean by "it keeps Eeloo in orbit around Sarnus, with it's new texture from Sarnus, BUT remains the orbit I gave it for Jool." Is it around Sarnus or Jool? And what exactly are you trying to accomplish?

Link to comment
Share on other sites
SmashingKirby148

SmashingKirby148

Posted
Posted
Just now, The White Guardian said:

@SmashingKirby148 Are you sure it loads after OPM itself? Could be that it simply can't find 'Sarnus' yet.

Also, what do you mean by "it keeps Eeloo in orbit around Sarnus, with it's new texture from Sarnus, BUT remains the orbit I gave it for Jool." Is it around Sarnus or Jool? And what exactly are you trying to accomplish?

 

Not sure... Should it be AFTER[OPM]?

It is around Sarnus, and it looks like the modified OPM Eeloo, but instead of orbiting in between Slate and the rings, it orbits at the height I gave it for when it's meant to be around Jool. So it's around Sarnus, with a different height.

Link to comment
Share on other sites
The White Guardian

The White Guardian

Posted
Posted
Just now, SmashingKirby148 said:

Not sure... Should it be AFTER[OPM]?

It is around Sarnus, and it looks like the modified OPM Eeloo, but instead of orbiting in between Slate and the rings, it orbits at the height I gave it for when it's meant to be around Jool. So it's around Sarnus, with a different height.

Hmm... try changing it to AFTER[OPM] indeed, that should force it to be loaded after OPM. Actually, try AFTER[OPM]:NEEDS[OPM] to ensure both loading order and dependencies are in place.

Link to comment
Share on other sites
SmashingKirby148

SmashingKirby148

Posted
Posted
39 minutes ago, The White Guardian said:

Hmm... try changing it to AFTER[OPM] indeed, that should force it to be loaded after OPM. Actually, try AFTER[OPM]:NEEDS[OPM] to ensure both loading order and dependencies are in place.

Well, it half worked... The OPM Modified Eeloo is now orbiting Jool where it should be, and Vall is orbiting Sarnus, but not in its designated orbit. It orbits at the same height stock Eeloo orbits the Sun in the stock system, but around Sarnus.

Link to comment
Share on other sites
Galileo

Galileo

Posted
Posted (edited)

Is it possible to make the lifespan of an asteroid infinite..  Or should I just make the lifetime value some like 9999999?

Also, is it possible to have 2 persistent asteroid belts? The cfg I set up seems to swap between the two locations over time.  Changing the name of the belts doesn't seem to make a difference. 

Edited by Galileo
Link to comment
Share on other sites
The White Guardian

The White Guardian

Posted
Posted

I'm going to have to ask for a little help myself. Stupid LandControl mod is doing this to my planet:

mK5tUXv.png

And I have NO idea what's causing it.

And here's the culprit:

Spoiler 

				LandControl
				{
					altitudeBlend = 0.2
					altitudeFrequency = 12
					altitudeOctaves = 2
					altitudePersistance = 0.6
					altitudeSeed = 212121
					createColors = True
					createScatter = True
					latitudeBlend = 0.05
					latitudeFrequency = 4
					latitudeOctaves = 4
					latitudePersistance = 0.6
					latitudeSeed = 47373
					longitudeBlend = 0.05
					longitudeFrequency = 4
					longitudeOctaves = 4
					longitudePersistance = 0.6
					longitudeSeed = 768453
					useHeightMap = False
					vHeightMax = 3500
					order = 9999991
					enabled = True
					altitudeSimplex
					{
						frequency = 12
						octaves = 2
						persistence = 0.600000023841858
					}
					latitudeSimplex
					{
						frequency = 4
						octaves = 4
						persistence = 0.600000023841858
					}
					longitudeSimplex
					{
						frequency = 4
						octaves = 4
						persistence = 0.600000023841858
					}
					landClasses
					{
						Class
						{
							alterApparentHeight = 0
							alterRealHeight = 0
							color = 0.49804,0.4549,0.32941,1
							coverageBlend = 1
							coverageFrequency = 8
							coverageOctaves = 3
							coveragePersistance = 0.9
							coverageSeed = 34535345
							name = MainClass
							latDelta = 1
							latitudeDouble = False
							lonDelta = 1
							minimumRealHeight = 0
							noiseBlend = 1
							noiseColor = 0.76078,0.69804,0.50196,1
							noiseFrequency = 5
							noiseOctaves = 6
							noisePersistance = 0.7
							noiseSeed = 45656745
							delete = False
							altitudeRange
							{
								endEnd = 0.2
								endStart = 0.2
								startEnd = -250
								startStart = -250
							}
							coverageSimplex
							{
								frequency = 8
								octaves = 3
								persistence = 0.899999976158142
							}
							latitudeDoubleRange
							{
								endEnd = 11
								endStart = 11
								startEnd = -9
								startStart = -9
							}
							latitudeRange
							{
								endEnd = 10
								endStart = 10
								startEnd = -10
								startStart = -10
							}
							longitudeRange
							{
								endEnd = 10
								endStart = 10
								startEnd = -10
								startStart = -10
							}
							noiseSimplex
							{
								frequency = 5
								octaves = 6
								persistence = 0.699999988079071
							}
							scatters
							{
								Scatter
								{
									density = 0.5
									scatterName = boulder
								}
							}
						}
						Class
						{
							alterApparentHeight = 0
							alterRealHeight = 0
							color = 0,0.48235,0.74118,1
							coverageBlend = 1
							coverageFrequency = 8
							coverageOctaves = 3
							coveragePersistance = 0.9
							coverageSeed = 34535345
							name = High
							latDelta = 1
							latitudeDouble = False
							lonDelta = 1
							minimumRealHeight = 0
							noiseBlend = 1
							noiseColor = 0,0.20784,0.54118,1
							noiseFrequency = 5
							noiseOctaves = 6
							noisePersistance = 0.7
							noiseSeed = 45656745
							delete = False
							altitudeRange
							{
								endEnd = 250
								endStart = 250
								startEnd = 0.2
								startStart = 0.2
							}
							coverageSimplex
							{
								frequency = 8
								octaves = 3
								persistence = 0.899999976158142
							}
							latitudeDoubleRange
							{
								endEnd = 11
								endStart = 11
								startEnd = -9
								startStart = -9
							}
							latitudeRange
							{
								endEnd = 10
								endStart = 10
								startEnd = -10
								startStart = -10
							}
							longitudeRange
							{
								endEnd = 10
								endStart = 10
								startEnd = -10
								startStart = -10
							}
							noiseSimplex
							{
								frequency = 5
								octaves = 6
								persistence = 0.699999988079071
							}
							scatters
							{
								Scatter
								{
									density = 0.5
									scatterName = boulder
								}
							}
						}
						Class
						{
							alterApparentHeight = 0
							alterRealHeight = 0
							color = 0.76078,0.69804,0.50196,1
							coverageBlend = 1
							coverageFrequency = 8
							coverageOctaves = 3
							coveragePersistance = 0.8
							coverageSeed = 93747294
							name = PolarClass
							latDelta = 0
							latitudeDouble = True
							lonDelta = 1
							minimumRealHeight = 0.100000001490116
							noiseBlend = 1
							noiseColor = 0.49804,0.4549,0.32941,1
							noiseFrequency = 9
							noiseOctaves = 6
							noisePersistance = 0.2
							noiseSeed = 6288946
							delete = False
							altitudeRange
							{
								endEnd = 10
								endStart = 10
								startEnd = -10
								startStart = -10
							}
							coverageSimplex
							{
								frequency = 8
								octaves = 3
								persistence = 0.800000011920929
							}
							latitudeDoubleRange
							{
								endEnd = 11
								endStart = 11
								startEnd = 0.754999995231628
								startStart = 0.65
							}
							latitudeRange
							{
								endEnd = 0.35
								endStart = 0.245000004768372
								startEnd = -10
								startStart = -10
							}
							longitudeRange
							{
								endEnd = 10
								endStart = 10
								startEnd = -10
								startStart = -10
							}
							noiseSimplex
							{
								frequency = 9
								octaves = 6
								persistence = 0.200000002980232
							}
							scatters
							{
								Scatter
								{
									density = 0.4
									scatterName = boulder
								}
							}
						}
					}
					scatters
					{
						Scatter
						{
							materialType = Diffuse
							mesh = BUILTIN/boulder
							castShadows = True
							densityFactor = 0.25
							maxCache = 512
							maxCacheDelta = 32
							maxLevelOffset = 0
							maxScale = 4
							maxScatter = 20
							maxSpeed = 1000
							minScale = 0.1
							recieveShadows = True
							name = boulder
							seed = 4565677
							verticalOffset = 0.2
							delete = False
							collide = False
							science = False
							Material
							{
								color = 0,0.48235,0.74118,1
								mainTex = BUILTIN/terrain_rock00
								mainTexScale = 1,1
								mainTexOffset = 0,0
							}
							Experiment
							{
							}
						}
					}
				}

 

Disabling LandControl -> no problem, enabling LandControl -> stupid black outlines on everything. Does anyone know what I'm doing wrong with this overcomplicated problem-maker?

Link to comment
Share on other sites
Sigma88

Sigma88

Posted
Posted (edited)
1 hour ago, The White Guardian said:

I'm going to have to ask for a little help myself. Stupid LandControl mod is doing this to my planet:

mK5tUXv.png

And I have NO idea what's causing it.

And here's the culprit:

  Hide contents 


				LandControl
				{
					altitudeBlend = 0.2
					altitudeFrequency = 12
					altitudeOctaves = 2
					altitudePersistance = 0.6
					altitudeSeed = 212121
					createColors = True
					createScatter = True
					latitudeBlend = 0.05
					latitudeFrequency = 4
					latitudeOctaves = 4
					latitudePersistance = 0.6
					latitudeSeed = 47373
					longitudeBlend = 0.05
					longitudeFrequency = 4
					longitudeOctaves = 4
					longitudePersistance = 0.6
					longitudeSeed = 768453
					useHeightMap = False
					vHeightMax = 3500
					order = 9999991
					enabled = True
					altitudeSimplex
					{
						frequency = 12
						octaves = 2
						persistence = 0.600000023841858
					}
					latitudeSimplex
					{
						frequency = 4
						octaves = 4
						persistence = 0.600000023841858
					}
					longitudeSimplex
					{
						frequency = 4
						octaves = 4
						persistence = 0.600000023841858
					}
					landClasses
					{
						Class
						{
							alterApparentHeight = 0
							alterRealHeight = 0
							color = 0.49804,0.4549,0.32941,1
							coverageBlend = 1
							coverageFrequency = 8
							coverageOctaves = 3
							coveragePersistance = 0.9
							coverageSeed = 34535345
							name = MainClass
							latDelta = 1
							latitudeDouble = False
							lonDelta = 1
							minimumRealHeight = 0
							noiseBlend = 1
							noiseColor = 0.76078,0.69804,0.50196,1
							noiseFrequency = 5
							noiseOctaves = 6
							noisePersistance = 0.7
							noiseSeed = 45656745
							delete = False
							altitudeRange
							{
								endEnd = 0.2
								endStart = 0.2
								startEnd = -250
								startStart = -250
							}
							coverageSimplex
							{
								frequency = 8
								octaves = 3
								persistence = 0.899999976158142
							}
							latitudeDoubleRange
							{
								endEnd = 11
								endStart = 11
								startEnd = -9
								startStart = -9
							}
							latitudeRange
							{
								endEnd = 10
								endStart = 10
								startEnd = -10
								startStart = -10
							}
							longitudeRange
							{
								endEnd = 10
								endStart = 10
								startEnd = -10
								startStart = -10
							}
							noiseSimplex
							{
								frequency = 5
								octaves = 6
								persistence = 0.699999988079071
							}
							scatters
							{
								Scatter
								{
									density = 0.5
									scatterName = boulder
								}
							}
						}
						Class
						{
							alterApparentHeight = 0
							alterRealHeight = 0
							color = 0,0.48235,0.74118,1
							coverageBlend = 1
							coverageFrequency = 8
							coverageOctaves = 3
							coveragePersistance = 0.9
							coverageSeed = 34535345
							name = High
							latDelta = 1
							latitudeDouble = False
							lonDelta = 1
							minimumRealHeight = 0
							noiseBlend = 1
							noiseColor = 0,0.20784,0.54118,1
							noiseFrequency = 5
							noiseOctaves = 6
							noisePersistance = 0.7
							noiseSeed = 45656745
							delete = False
							altitudeRange
							{
								endEnd = 250
								endStart = 250
								startEnd = 0.2
								startStart = 0.2
							}
							coverageSimplex
							{
								frequency = 8
								octaves = 3
								persistence = 0.899999976158142
							}
							latitudeDoubleRange
							{
								endEnd = 11
								endStart = 11
								startEnd = -9
								startStart = -9
							}
							latitudeRange
							{
								endEnd = 10
								endStart = 10
								startEnd = -10
								startStart = -10
							}
							longitudeRange
							{
								endEnd = 10
								endStart = 10
								startEnd = -10
								startStart = -10
							}
							noiseSimplex
							{
								frequency = 5
								octaves = 6
								persistence = 0.699999988079071
							}
							scatters
							{
								Scatter
								{
									density = 0.5
									scatterName = boulder
								}
							}
						}
						Class
						{
							alterApparentHeight = 0
							alterRealHeight = 0
							color = 0.76078,0.69804,0.50196,1
							coverageBlend = 1
							coverageFrequency = 8
							coverageOctaves = 3
							coveragePersistance = 0.8
							coverageSeed = 93747294
							name = PolarClass
							latDelta = 0
							latitudeDouble = True
							lonDelta = 1
							minimumRealHeight = 0.100000001490116
							noiseBlend = 1
							noiseColor = 0.49804,0.4549,0.32941,1
							noiseFrequency = 9
							noiseOctaves = 6
							noisePersistance = 0.2
							noiseSeed = 6288946
							delete = False
							altitudeRange
							{
								endEnd = 10
								endStart = 10
								startEnd = -10
								startStart = -10
							}
							coverageSimplex
							{
								frequency = 8
								octaves = 3
								persistence = 0.800000011920929
							}
							latitudeDoubleRange
							{
								endEnd = 11
								endStart = 11
								startEnd = 0.754999995231628
								startStart = 0.65
							}
							latitudeRange
							{
								endEnd = 0.35
								endStart = 0.245000004768372
								startEnd = -10
								startStart = -10
							}
							longitudeRange
							{
								endEnd = 10
								endStart = 10
								startEnd = -10
								startStart = -10
							}
							noiseSimplex
							{
								frequency = 9
								octaves = 6
								persistence = 0.200000002980232
							}
							scatters
							{
								Scatter
								{
									density = 0.4
									scatterName = boulder
								}
							}
						}
					}
					scatters
					{
						Scatter
						{
							materialType = Diffuse
							mesh = BUILTIN/boulder
							castShadows = True
							densityFactor = 0.25
							maxCache = 512
							maxCacheDelta = 32
							maxLevelOffset = 0
							maxScale = 4
							maxScatter = 20
							maxSpeed = 1000
							minScale = 0.1
							recieveShadows = True
							name = boulder
							seed = 4565677
							verticalOffset = 0.2
							delete = False
							collide = False
							science = False
							Material
							{
								color = 0,0.48235,0.74118,1
								mainTex = BUILTIN/terrain_rock00
								mainTexScale = 1,1
								mainTexOffset = 0,0
							}
							Experiment
							{
							}
						}
					}
				}

 

Disabling LandControl -> no problem, enabling LandControl -> stupid black outlines on everything. Does anyone know what I'm doing wrong with this overcomplicated problem-maker?

which template are you using ?

did you add removePQSMods = LandControl (might be removePQSMods = PQSLandControl, I don't remember) or did you just add the code you posted above?

Edited by Sigma88
Link to comment
Share on other sites
Proot

Proot

Posted
Posted

Hi, I'm still working with terrain scatters. Specially at Kerbin. Now I'm trying to get the objects in "real time" (appearing and dissapearing properly while you overfly in certain area). It seems related with scatterer/maxSpeed (rising maxSpeed the objects appears even when you are flying fast over an area) but yet it seems to work pretty randomly. As example: if the zone have trees, weed and rocks... just rocks and weed appear in realtime. Then you reload and the scene has a lot of trees... (this is very similar to the stock behaviour)

But sometimes (just sometimes) you flight high, and when I'm back everything appear and dissapears in real time (which is gorgeous...).

So I would like to know if this is caused by my lack of knowledge about the Kopernicus capabilities o just the stock behaviour of terrain scatters (as far as I know, not finished at all).

Link to comment
Share on other sites
SmashingKirby148

SmashingKirby148

Posted
Posted
3 hours ago, The White Guardian said:

I'm going to have to ask for a little help myself. Stupid LandControl mod is doing this to my planet:

mK5tUXv.png

And I have NO idea what's causing it.

And here's the culprit:

  Reveal hidden contents 


				LandControl
				{
					altitudeBlend = 0.2
					altitudeFrequency = 12
					altitudeOctaves = 2
					altitudePersistance = 0.6
					altitudeSeed = 212121
					createColors = True
					createScatter = True
					latitudeBlend = 0.05
					latitudeFrequency = 4
					latitudeOctaves = 4
					latitudePersistance = 0.6
					latitudeSeed = 47373
					longitudeBlend = 0.05
					longitudeFrequency = 4
					longitudeOctaves = 4
					longitudePersistance = 0.6
					longitudeSeed = 768453
					useHeightMap = False
					vHeightMax = 3500
					order = 9999991
					enabled = True
					altitudeSimplex
					{
						frequency = 12
						octaves = 2
						persistence = 0.600000023841858
					}
					latitudeSimplex
					{
						frequency = 4
						octaves = 4
						persistence = 0.600000023841858
					}
					longitudeSimplex
					{
						frequency = 4
						octaves = 4
						persistence = 0.600000023841858
					}
					landClasses
					{
						Class
						{
							alterApparentHeight = 0
							alterRealHeight = 0
							color = 0.49804,0.4549,0.32941,1
							coverageBlend = 1
							coverageFrequency = 8
							coverageOctaves = 3
							coveragePersistance = 0.9
							coverageSeed = 34535345
							name = MainClass
							latDelta = 1
							latitudeDouble = False
							lonDelta = 1
							minimumRealHeight = 0
							noiseBlend = 1
							noiseColor = 0.76078,0.69804,0.50196,1
							noiseFrequency = 5
							noiseOctaves = 6
							noisePersistance = 0.7
							noiseSeed = 45656745
							delete = False
							altitudeRange
							{
								endEnd = 0.2
								endStart = 0.2
								startEnd = -250
								startStart = -250
							}
							coverageSimplex
							{
								frequency = 8
								octaves = 3
								persistence = 0.899999976158142
							}
							latitudeDoubleRange
							{
								endEnd = 11
								endStart = 11
								startEnd = -9
								startStart = -9
							}
							latitudeRange
							{
								endEnd = 10
								endStart = 10
								startEnd = -10
								startStart = -10
							}
							longitudeRange
							{
								endEnd = 10
								endStart = 10
								startEnd = -10
								startStart = -10
							}
							noiseSimplex
							{
								frequency = 5
								octaves = 6
								persistence = 0.699999988079071
							}
							scatters
							{
								Scatter
								{
									density = 0.5
									scatterName = boulder
								}
							}
						}
						Class
						{
							alterApparentHeight = 0
							alterRealHeight = 0
							color = 0,0.48235,0.74118,1
							coverageBlend = 1
							coverageFrequency = 8
							coverageOctaves = 3
							coveragePersistance = 0.9
							coverageSeed = 34535345
							name = High
							latDelta = 1
							latitudeDouble = False
							lonDelta = 1
							minimumRealHeight = 0
							noiseBlend = 1
							noiseColor = 0,0.20784,0.54118,1
							noiseFrequency = 5
							noiseOctaves = 6
							noisePersistance = 0.7
							noiseSeed = 45656745
							delete = False
							altitudeRange
							{
								endEnd = 250
								endStart = 250
								startEnd = 0.2
								startStart = 0.2
							}
							coverageSimplex
							{
								frequency = 8
								octaves = 3
								persistence = 0.899999976158142
							}
							latitudeDoubleRange
							{
								endEnd = 11
								endStart = 11
								startEnd = -9
								startStart = -9
							}
							latitudeRange
							{
								endEnd = 10
								endStart = 10
								startEnd = -10
								startStart = -10
							}
							longitudeRange
							{
								endEnd = 10
								endStart = 10
								startEnd = -10
								startStart = -10
							}
							noiseSimplex
							{
								frequency = 5
								octaves = 6
								persistence = 0.699999988079071
							}
							scatters
							{
								Scatter
								{
									density = 0.5
									scatterName = boulder
								}
							}
						}
						Class
						{
							alterApparentHeight = 0
							alterRealHeight = 0
							color = 0.76078,0.69804,0.50196,1
							coverageBlend = 1
							coverageFrequency = 8
							coverageOctaves = 3
							coveragePersistance = 0.8
							coverageSeed = 93747294
							name = PolarClass
							latDelta = 0
							latitudeDouble = True
							lonDelta = 1
							minimumRealHeight = 0.100000001490116
							noiseBlend = 1
							noiseColor = 0.49804,0.4549,0.32941,1
							noiseFrequency = 9
							noiseOctaves = 6
							noisePersistance = 0.2
							noiseSeed = 6288946
							delete = False
							altitudeRange
							{
								endEnd = 10
								endStart = 10
								startEnd = -10
								startStart = -10
							}
							coverageSimplex
							{
								frequency = 8
								octaves = 3
								persistence = 0.800000011920929
							}
							latitudeDoubleRange
							{
								endEnd = 11
								endStart = 11
								startEnd = 0.754999995231628
								startStart = 0.65
							}
							latitudeRange
							{
								endEnd = 0.35
								endStart = 0.245000004768372
								startEnd = -10
								startStart = -10
							}
							longitudeRange
							{
								endEnd = 10
								endStart = 10
								startEnd = -10
								startStart = -10
							}
							noiseSimplex
							{
								frequency = 9
								octaves = 6
								persistence = 0.200000002980232
							}
							scatters
							{
								Scatter
								{
									density = 0.4
									scatterName = boulder
								}
							}
						}
					}
					scatters
					{
						Scatter
						{
							materialType = Diffuse
							mesh = BUILTIN/boulder
							castShadows = True
							densityFactor = 0.25
							maxCache = 512
							maxCacheDelta = 32
							maxLevelOffset = 0
							maxScale = 4
							maxScatter = 20
							maxSpeed = 1000
							minScale = 0.1
							recieveShadows = True
							name = boulder
							seed = 4565677
							verticalOffset = 0.2
							delete = False
							collide = False
							science = False
							Material
							{
								color = 0,0.48235,0.74118,1
								mainTex = BUILTIN/terrain_rock00
								mainTexScale = 1,1
								mainTexOffset = 0,0
							}
							Experiment
							{
							}
						}
					}
				}

 

Disabling LandControl -> no problem, enabling LandControl -> stupid black outlines on everything. Does anyone know what I'm doing wrong with this overcomplicated problem-maker?

 

Woah. That looks wacky. :o

Obviously I don't know what causes that. :P To prevent cluttering this thread, I'll continue about my compatibility issues in our PM.

Link to comment
Share on other sites
This thread is quite old. Please consider starting a new thread rather than reviving this one.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing
×
×
  • Create New...