ElonsMusk Posted March 14, 2021 Share Posted March 14, 2021 On 3/13/2021 at 10:34 AM, realjuliusPGKC said: how do i use the parts to dock something to my craft with it attached i cant figure out how like docking a resupply mission to the ISS but in KSP Are you asking about using some kind of arm to dock a craft? Soyuz -> ISS for example, you would need the arm in space, depends how you'd like to do it. Say your arm is connected to the station, with a grapple node on the end to grab modules. You can connect multiple nodes across crafts, called Multi-Docking when referring to docking ports. Knowing this, you can simply use the arm to maneuver into docking position, and either dock it before releasing the grapple, or release it with 0 velocity near the port and push the station forwards to dock. Quote Link to comment Share on other sites More sharing options...
AccidentalDisassembly Posted March 25, 2021 Share Posted March 25, 2021 Is there a way to stop IR from creating its own part category when Breaking Ground is installed, since it already has a Robotics category? Appling @category = Robotics doesn't seem to stop the IR DLL from swooping in and re-categorizing everything... Quote Link to comment Share on other sites More sharing options...
KallangoVerde Posted April 18, 2021 Share Posted April 18, 2021 Is the InnerLock mod required if I want to reproduce the Canadarm 2 worm movement across the ISS? Quote Link to comment Share on other sites More sharing options...
kcs123 Posted April 18, 2021 Share Posted April 18, 2021 3 hours ago, KallangoVerde said: Is the InnerLock mod required if I want to reproduce the Canadarm 2 worm movement across the ISS? No. You need double docking head on candarm, though. I don't know if "magnet" docking port still works or not, but you can use claw or ordinary docking ports too. You will need probe, some batteries and maybe power source in middle section of Candarm to replicate funcionality within game. Threre is some old video about it how someone acomplished it several KSP versions ago. I belive that trick used on that video still works. Can't recall author name that might help you to search for more info. Quote Link to comment Share on other sites More sharing options...
KallangoVerde Posted April 19, 2021 Share Posted April 19, 2021 16 horas atrás, kcs123 disse: Não. Você precisa de uma cabeça de encaixe dupla no candarm, no entanto. Não sei se a porta de dock "magnética" ainda funciona ou não, mas você também pode usar portas de garra ou comuns. Você precisará de uma sonda, algumas baterias e talvez uma fonte de energia na seção intermediária do Candarm para replicar a funcionalidade dentro do jogo. Há um vídeo antigo sobre como alguém conseguiu isso várias versões do KSP atrás. Eu acredito que o truque usado naquele vídeo ainda funciona. Não consigo me lembrar do nome do autor que pode ajudá-lo a pesquisar mais informações. The center of the canadarm would be a probe and this would be the root piece from which it would extend, for both sides, the construction of the arm ... like an "arm ship"? That's it? Google didn't translate well this time and that's what I understood ... Quote Link to comment Share on other sites More sharing options...
kcs123 Posted April 19, 2021 Share Posted April 19, 2021 26 minutes ago, KallangoVerde said: The center of the canadarm would be a probe and this would be the root piece from which it would extend, for both sides, the construction of the arm ... like an "arm ship"? That's it? Yes, something like that. You need probe in the arm due to docking/undocking on both sides. Without it you may lose control over candarm. And you need electicity for both, probe and hinges and/or other IR parts. There was a bug with IR and this kind of mechanism, when you dock/undock candarm, you may revert orientation on some parts. What you have assigned as "left" rotation, may become "right" or something similar. Exception is, that such candarm does not need engines, fuel, etc. Like regular craft. But, docking/undocking and merging two crafts in KSP was always a bit buggy, even without IR. Quote Link to comment Share on other sites More sharing options...
KallangoVerde Posted April 19, 2021 Share Posted April 19, 2021 45 minutes ago, kcs123 said: Sim algo assim. Você precisa de uma sonda no braço devido ao encaixe / desencaixe em ambos os lados. Sem ele, você pode perder o controle sobre o candarme. E você precisa de eletricidade para ambos, sonda e dobradiças e / ou outras peças de infravermelho. Havia um bug com IR e este tipo de mecanismo, quando você encaixar / desencaixar o candarm, você pode reverter a orientação em algumas partes. O que você atribuiu como rotação "esquerda" pode se tornar "direita" ou algo semelhante. A exceção é que tal vela não precisa de motores, combustível, etc. Como embarcações normais. Mas, encaixar / desencaixar e mesclar duas embarcações no KSP sempre foi um pouco problemático, mesmo sem IR. It's true ... my dream is to see a canadarm Sotck in the original game that can move as easily as the ISS. Setting up a station without a robotic arm is not that cool ... I hope KSP 2 can have that. I have the game's robotic DLC ... maybe that can help. Thank you for the tips! Quote Link to comment Share on other sites More sharing options...
ElonsMusk Posted April 20, 2021 Share Posted April 20, 2021 10 hours ago, KallangoVerde said: It's true ... my dream is to see a canadarm Sotck in the original game that can move as easily as the ISS. Setting up a station without a robotic arm is not that cool ... I hope KSP 2 can have that. I have the game's robotic DLC ... maybe that can help. Thank you for the tips! I understand you mentioned stock, however, there is a wicked good station arm that comes with a servo programmer so you can set nice clean movements in space for docking parts. For what its worth, you definitely can build a Canadarm with robotics. You're going to need to go through some testing on your own to tune the damping, timings, etc. Default settings for robotics are a little wonky. I have no doubt you can use KAL controllers to program a good docking arm. Quote Link to comment Share on other sites More sharing options...
adriangm44 Posted April 28, 2021 Share Posted April 28, 2021 How can I build a sun tracking robotic part? Quote Link to comment Share on other sites More sharing options...
ElonsMusk Posted April 28, 2021 Share Posted April 28, 2021 1 hour ago, adriangm44 said: How can I build a sun tracking robotic part? I think you would need to do some math and time them. I can't think of a way to detect sunlight or anything like that. Quote Link to comment Share on other sites More sharing options...
DaveyJ576 Posted April 28, 2021 Share Posted April 28, 2021 Hello! I love your mod. Great work! I downloaded and installed a few days ago and have been tinkering with it. I am running 1.10 with BDB and have run into a semi-weird issue. Does anyone have an idea for the reason that the arms separated from the hinges? They were attached when I landed and for the initial work of unloading a rover. After a save, I came back and it was like this. It was still full functional. Did I goon something up? Thanks! Quote Link to comment Share on other sites More sharing options...
stk2008 Posted April 28, 2021 Share Posted April 28, 2021 Oh you are one 1.10 I was under the impression this did not work with 1.10.1 ETC if so mind linking to correct version pretty please? Thanks Quote Link to comment Share on other sites More sharing options...
si2504 Posted May 11, 2021 Share Posted May 11, 2021 How difficult is it to make mods with robotic parts compatible with IR? The only current Module in the parts config is an MuMechToggle. Could I not just add a IR Module to the part and if so, would anything else need to be added to ensure compatibility? Thanks. Quote Link to comment Share on other sites More sharing options...
ElonsMusk Posted May 11, 2021 Share Posted May 11, 2021 (edited) On 4/28/2021 at 3:12 PM, DaveyJ576 said: Hello! I love your mod. Great work! I downloaded and installed a few days ago and have been tinkering with it. I am running 1.10 with BDB and have run into a semi-weird issue. Spoiler Does anyone have an idea for the reason that the arms separated from the hinges? They were attached when I landed and for the initial work of unloading a rover. After a save, I came back and it was like this. It was still full functional. Did I goon something up? Thanks! I've had this happen and, to be frank, it makes me avoid IR parts if I can. I notice it happens when re-entering a scene with a scaled down part, it seems to attach to where it would be if it was full size. I still use the scissor lift part and some rail parts, don't be offended author. Edited May 11, 2021 by ElonsMusk Quote Link to comment Share on other sites More sharing options...
audoh Posted May 19, 2021 Share Posted May 19, 2021 When I place a servo rotatron in 1.10.1, it refuses to rotate, and just sort of jerks about like it's fighting something that's trying to keep it in its original position. I don't have Kerbal Joint Reinforcement. Quote Link to comment Share on other sites More sharing options...
ElonsMusk Posted May 19, 2021 Share Posted May 19, 2021 1 hour ago, audoh said: When I place a servo rotatron in 1.10.1, it refuses to rotate, and just sort of jerks about like it's fighting something that's trying to keep it in its original position. I don't have Kerbal Joint Reinforcement. Is it autostrutted by accident? All I can think of... Quote Link to comment Share on other sites More sharing options...
audoh Posted May 19, 2021 Share Posted May 19, 2021 (edited) 6 hours ago, ElonsMusk said: Is it autostrutted by accident? All I can think of... Unfortunately I don't think it's that, I enabled advanced tweakables and checked everything like that. Okay, I'm experimenting a bit more and it seems like the problem is the rotatrons being placed directly on a structural fuselage. If I place them instead on a truss frame attached to the fuselage it's all good. Edited May 19, 2021 by audoh More experimenting with the bug Quote Link to comment Share on other sites More sharing options...
si2504 Posted June 4, 2021 Share Posted June 4, 2021 any way to reverse which end of a robotic arm is the root part? I'm trying to make a canadarm2 and the mesh base of a part has to be placed facing the root and the rotating end facing away from the root. The issue with this is when you have two LEE on an arm, once the opposite end has been attached to a docking port, this now becomes the root but now the rotating parts are facing the wrong way to move the arm and the nodes become detached from joining parts when you try and rotate a joint. What can I do to over come this? Quote Link to comment Share on other sites More sharing options...
ElonsMusk Posted June 5, 2021 Share Posted June 5, 2021 12 hours ago, si2504 said: any way to reverse which end of a robotic arm is the root part? I'm trying to make a canadarm2 and the mesh base of a part has to be placed facing the root and the rotating end facing away from the root. The issue with this is when you have two LEE on an arm, once the opposite end has been attached to a docking port, this now becomes the root but now the rotating parts are facing the wrong way to move the arm and the nodes become detached from joining parts when you try and rotate a joint. What can I do to over come this? Technically, I don't think so. Feasibly, what if you put a dock between is, so two 'crafts' become one full arm? This way you can 'flip' a part by making the dock its parent. Quote Link to comment Share on other sites More sharing options...
Rudolf Meier Posted June 18, 2021 Author Share Posted June 18, 2021 On 4/28/2021 at 4:41 PM, adriangm44 said: How can I build a sun tracking robotic part? hi... this is already in the code if I remember correctly... maybe I'll restart the development soon... On 6/5/2021 at 12:02 AM, si2504 said: any way to reverse which end of a robotic arm is the root part? I'm trying to make a canadarm2 and the mesh base of a part has to be placed facing the root and the rotating end facing away from the root. The issue with this is when you have two LEE on an arm, once the opposite end has been attached to a docking port, this now becomes the root but now the rotating parts are facing the wrong way to move the arm and the nodes become detached from joining parts when you try and rotate a joint. What can I do to over come this? IR allows you to do this (at least in the latest version I was working on) ... I'll bring out an update soon... but with IR (maybe an unpublished version, that's something I don't know for sure) you actually can build a Canadarm-2 (and you can walk around with it). I'm not sure if I had some problems or if it was release when I stopped working on this project. On 5/19/2021 at 7:35 PM, audoh said: Unfortunately I don't think it's that, I enabled advanced tweakables and checked everything like that. Okay, I'm experimenting a bit more and it seems like the problem is the rotatrons being placed directly on a structural fuselage. If I place them instead on a truss frame attached to the fuselage it's all good. there is a debug version of IR that allows you to show all the connections inside the vessel... like this you can easily find out who is strutting down what... and in case of a problem in IR... maybe it can be fixed Quote Link to comment Share on other sites More sharing options...
davide96 Posted June 19, 2021 Share Posted June 19, 2021 will this mod work in KSP 1.11??? Quote Link to comment Share on other sites More sharing options...
Rudolf Meier Posted June 19, 2021 Author Share Posted June 19, 2021 2 hours ago, davide96 said: will this mod work in KSP 1.11??? sure... all I have to do is to completly reinstall my computer and all development tools... this will take some time... then updating to new version and ... I cannot give a time, but it's planned to restart Quote Link to comment Share on other sites More sharing options...
davide96 Posted June 19, 2021 Share Posted June 19, 2021 49 minutes ago, Rudolf Meier said: sure... all I have to do is to completly reinstall my computer and all development tools... this will take some time... then updating to new version and ... I cannot give a time, but it's planned to restart thanks!! Quote Link to comment Share on other sites More sharing options...
ElonsMusk Posted June 19, 2021 Share Posted June 19, 2021 9 hours ago, davide96 said: will this mod work in KSP 1.11??? It *should*. I've migrated from .11 to .12 without having to change much, and it included IR and its sequencer. Quote Link to comment Share on other sites More sharing options...
ss8913 Posted July 15, 2021 Share Posted July 15, 2021 On 6/19/2021 at 11:33 AM, ElonsMusk said: It *should*. I've migrated from .11 to .12 without having to change much, and it included IR and its sequencer. I can confirm that IR works fine on the latest KSP. It works with KJR [still] also. The only issue I have, which goes back years, is that these parts are kind of weak, at least for manipulating 200+ ton cargo containers. What does help with that though are Quantum Struts. They take a fair bit of power, but you can turn them on and off, so, your grappling arm can grab the heavy thing and then you toggle the quantum struts ON to stabilize things, and then when you retract it into your ship, have a second set of struts to lock everything solidly in place. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.