Jump to content

Work-in-Progress [WIP] Design Thread


GusTurbo

Recommended Posts

Hi Kurotenshi,

I have just started to update my constellation mission with the new wing parts.

Your ascent module payload lander shown looks to be a similar size to my one. So it will be what I have done here:

http://cloud-4.steampowered.com/ugc/532875304925862488/75BAC5C0925E404D7FE0945639184CE5775E73CB/

This is the new fairing for the propulsion stage but I just reused the same fairing for the aeroshell landers but shortened.

And for the craftsmen out there, can you spot why this faring was harder than it looks?

MJ

If I had to bet, I'd say the same reason I had problem with mine: the wings that would be easy to place like that in two halves generate lift and screw with the ascent, so you have to first build a two-part ring (whose dimensions are difficult to calculate, too) that you can attach the other kind of rectangular wings to. Did I get it right?

Rune. You sure did, looks very good.

Link to comment
Share on other sites

If I had to bet, I'd say the same reason I had problem with mine: the wings that would be easy to place like that in two halves generate lift and screw with the ascent, so you have to first build a two-part ring (whose dimensions are difficult to calculate, too) that you can attach the other kind of rectangular wings to. Did I get it right?

Rune. You sure did, looks very good.

LOL, yup you are right mate. I was too eager to show my fairing and I hadn't tested it properly.. :blush:

I was struggling to get the wings to line up so I made an off center frame from the bottom to the top of the payload so I could attach the wings so they where centered.

Turns out those wings are, as you said, not good for fairings! Huge explosions followed.

Yup the bottom (still off center) ring then the other type of wings seems the only way.

*Reminder to self* test before posting. :D

MJ

Link to comment
Share on other sites

For smaller fairings, I used structural panels to create attachment points for the panels. I beams were used instead for larger fairings.

Yeah been trying that. any kind of bottom ring of parts to build up from. Panels where so much easier!

Link to comment
Share on other sites

I guess everything comes with a price :P Wings have less weight and result in lower part counts for fairings, but placement and aerodynamics complicates things. It's a worthwhile trade-off though, IMO

Yup, there's always a compromise..

I will make a faring for my constellation aeroshell landers and report back.

Link to comment
Share on other sites

Yup, there's always a compromise..

I will make a faring for my constellation aeroshell landers and report back.

Those are going to see some wind in the direction that matters... I predict a fairing that wants to point to the sky instead of staying under the payload, I think. It might work to increase drag, though, if you can keep it stable with, say, more reaction wheels torque. It would be stable in principle, too, but only if things were shadowed by others in stock KSP (I ran a quick stability analysis in my head, might have gotten it wrong but I think it's an unstable configuration of forces).

For smaller fairings, I used structural panels to create attachment points for the panels. I beams were used instead for larger fairings.

I actually used cubic struts to get finer control on the distance and placement. And I only built a couple of "wings" around the decoupler that holds the fairing, you only need to get halfway to the last panel's position, no need to close the circle. I think I used something like three on each side to get a 3.75m straight fairing (no bulge). The best part about them is the thickness allows you to hide small defects, too.

Rune. Actually, if you don't care that your faring peels like a banana, you can always build with x8 symmetry from the tank itself much easier. But the best part about a fairing is how it opens up!

Link to comment
Share on other sites

Those are going to see some wind in the direction that matters... I predict a fairing that wants to point to the sky instead of staying under the payload, I think. It might work to increase drag, though, if you can keep it stable with, say, more reaction wheels torque. It would be stable in principle, too, but only if things were shadowed by others in stock KSP (I ran a quick stability analysis in my head, might have gotten it wrong but I think it's an unstable configuration of forces).

I'm not exactly sure what you are saying Rune. Are you talking about wind effects on a Duna bound aeroshell?

The payload will be pointed along its direction of travel for most of the reentry. If it causes odd effects I will stick to the panel fairing as it works so well and

zero wind effect.

Edited by Majorjim
Link to comment
Share on other sites

I'm not exactly sure what you are saying Rune. Are you talking about wind effects on a Duna bound aeroshell?

The payload will be pointed along its direction of travel for most of the reentry. If it causes odd effects I will stick to the panel fairing as it works so well and

zero wind effect.

Yup, I meant at the end, when you have bled off most of the horizontal velocity, the fairing will be falling mostly horizontal, right? Or at least with an appreciable angle of attack. In those cases, they will see some air (the component of velocity perpendicular to the long axis, in this case vertical speed) and create lift. Anyhow, Duna's low air density, a few reaction wheels, and you shouldn't have much trouble. Perhaps the worst thing will be to get rid of them, since they will be lifting and the rest of the craft won't. The end result, if I get the force diagram right in my head, is half a fairing would like to stay on top during the descent, not under. Two halves should give symmetrical forces (additional drag only on the vertical axis! I think that's the good part) and solve it... ditch the top and bottom at the same time, maybe?

Rune. With separatrons! The effects on those looks really cool now.

Link to comment
Share on other sites

Yup, I meant at the end, when you have bled off most of the horizontal velocity, the fairing will be falling mostly horizontal, right? Or at least with an appreciable angle of attack. In those cases, they will see some air (the component of velocity perpendicular to the long axis, in this case vertical speed) and create lift. Anyhow, Duna's low air density, a few reaction wheels, and you shouldn't have much trouble. Perhaps the worst thing will be to get rid of them, since they will be lifting and the rest of the craft won't. The end result, if I get the force diagram right in my head, is half a fairing would like to stay on top during the descent, not under. Two halves should give symmetrical forces (additional drag only on the vertical axis! I think that's the good part) and solve it... ditch the top and bottom at the same time, maybe?

Rune. With separatrons! The effects on those looks really cool now.

Yeah they are cool looking now!

I see what you mean. I was thinking that too. Only a test will tell. I changed out the wings for the other ones and no issues now.

Just need to choose how many separating pieces now. The animation I saw had the engine payload fairing separate into four. And three for the aeroshells.

Link to comment
Share on other sites

Oh yes, I'm liking that design a lot. I love how you've hidden the engines inside the housing. In case you didn't know you can hide almost all of the jet engine inside other structures. The thrust from a jet comes from the centre of the jet but is extremely thin, like the equivalent of 1 pixel thick so as long as that is showing the rest of the jet can be hidden.

Link to comment
Share on other sites

A start at a X-33 rocket/plane thingy. It is very early testing, might be a dead end :sticktongue:

It is supposed to have a vertical liftoff and land like a plane.

yDA8GOj.png

WuKxjBb.png

Is there a show content code in this forum, images are very big?

Gue

Link to comment
Share on other sites

A start at a X-33 rocket/plane thingy. It is very early testing, might be a dead end :sticktongue:

It is supposed to have a vertical liftoff and land like a plane.

http://i.imgur.com/yDA8GOj.png

http://i.imgur.com/WuKxjBb.png

Is there a show content code in this forum, images are very big?

Gue

Holy cr*p that is se*y as hell....

Link to comment
Share on other sites

E6vmLeE.png

gCocVwm.png

X-37B inspired spaceplane, launched on top of a rocket. However, I keep having issues when attempting to land (mainly in lack of glide control, and the fact that it drops like a rock at low alt.)

p7Gzbpt.png

If I can fix that issue, it might turn out as a great mini-shuttle (with a cargo bay to boot!)

Link to comment
Share on other sites

Looking good! But wouldn't you want more of a smooth joint with the nosecone on top?

Rune. Just my usual nitpicking so it is even more awesome when you are done with it :)

Thanks man. Yeah the top isn't finished yet.

Also the fairing will be moved inwards a little which will improve that a bit.

When done it should be the same width as the current one. Hopefully!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...