raidernick Posted February 7, 2015 Author Share Posted February 7, 2015 UPDATE V0.98.5-Separated vernier engines from block e and block L, added proper engine gimbaling-Separated block E into lunar and vostok versions-Added Voskhod rocket and fairings-Fixed vostok lunar version nosecone-Various cfg tweaks-Updated all craft files and subassemblies-REMOVE OLD VERSION COMPLETELY BEFORE INSTALLING THIS Quote Link to comment Share on other sites More sharing options...
Kartoffelkuchen Posted February 8, 2015 Share Posted February 8, 2015 Whoa nice. But I'd say that the Fairing and engine cover should be probably orange. You can figure that out when you watch some old images, the fairing looks more red (because of the images age), but I'm pretty sure it was originally orange. I could be wrong, I'm not 100% sure. Quote Link to comment Share on other sites More sharing options...
MysteriousSteve Posted February 14, 2015 Share Posted February 14, 2015 Can someone help me out? Whenever I try to use one of your mods, this happens. Quote Link to comment Share on other sites More sharing options...
raidernick Posted February 14, 2015 Author Share Posted February 14, 2015 This is an error related to colliders. I know none of my parts cause this, but just to be sure I just tested every single part again from all of my mods(not just this one). None of them have this error. Try just my mod on a clean copy of the game. If you don't get this error then it's not my stuff. Quote Link to comment Share on other sites More sharing options...
stratochief66 Posted February 16, 2015 Share Posted February 16, 2015 Epic Hardware!I am working on RSS/RO MM files for some hardware of yours that doesn't already have it. Luna 1, 3, Vostok, Voskhod, Molniya Quote Link to comment Share on other sites More sharing options...
CelticCossack51 Posted March 11, 2015 Share Posted March 11, 2015 I noticed that the file size of one of my games is too big! Well it's cleansing time! Quote Link to comment Share on other sites More sharing options...
Sampa Posted March 11, 2015 Share Posted March 11, 2015 Hey, raidernick, I am going to be using your stuff in a picture playthrough following the development of the Salyut series culminating in the completion and later deorbiting of Mir! Quote Link to comment Share on other sites More sharing options...
VenomousRequiem Posted April 6, 2015 Share Posted April 6, 2015 Downloading, but if the R-7s can't do a proper Korolev Cross I might cry! Quote Link to comment Share on other sites More sharing options...
raidernick Posted April 6, 2015 Author Share Posted April 6, 2015 (edited) Downloading, but if the R-7s can't do a proper Korolev Cross I might cry!This has been a constant battle with the stock decoupler bug that for some reason isn't being fixed. It was so bad I had to add "seperation" motors to the boosters so they don't collide with the center stage. Sometimes the cross happens, sometimes it doesn't. Don't hold your breath, but feel free to blame squad for not fixing this after all this time.Also on a side note, I haven't abandoned my projects, I've been on a break from KSP for a couple months as I'm sick of it. It also looks like the guy working on the proton textures has gone awol so at this point I am declaring that project dead unless someone else wants to take up the reigns and not leave me hanging with nothing after giving them 4 months to work on it. Edited April 6, 2015 by raidernick Quote Link to comment Share on other sites More sharing options...
dimovski Posted April 6, 2015 Share Posted April 6, 2015 Well, it's good to hear that you're still with us! Quote Link to comment Share on other sites More sharing options...
VenomousRequiem Posted April 7, 2015 Share Posted April 7, 2015 Oh, a Proton would be awesome! I hope that that guy comes back! Maybe you could ask DennyTX or Bobcat! They both made pretty good Protons. Quote Link to comment Share on other sites More sharing options...
raidernick Posted April 7, 2015 Author Share Posted April 7, 2015 Maybe you could ask DennyTX or Bobcat! They both made pretty good Protons.Not an option Quote Link to comment Share on other sites More sharing options...
raidernick Posted April 7, 2015 Author Share Posted April 7, 2015 For people who have been asking I released just the solar panels from this mod as a standalone pack: http://forum.kerbalspaceprogram.com/threads/115060 Quote Link to comment Share on other sites More sharing options...
VenomousRequiem Posted April 11, 2015 Share Posted April 11, 2015 Have you ever considered making launch clamps? Like the Gagarin's Start kinda towers that wrap around the... well pretty much every R-7 ever. Quote Link to comment Share on other sites More sharing options...
raidernick Posted April 25, 2015 Author Share Posted April 25, 2015 Ok so I decided to give the proton textures a shot myself. They are pretty much done for the Proton-K except for the normal maps which I still need to do. Obviously I won't be releasing anything until after ksp1.0 hits as it will break all of the rocket parts anyway. Quote Link to comment Share on other sites More sharing options...
StoryMusgrave Posted April 25, 2015 Share Posted April 25, 2015 YAY! By chance are you going to make a Blok-DM03 and/or Briz-M? Quote Link to comment Share on other sites More sharing options...
raidernick Posted April 25, 2015 Author Share Posted April 25, 2015 I already did that, they just need to be properly textured like the rocket. Quote Link to comment Share on other sites More sharing options...
StoryMusgrave Posted April 25, 2015 Share Posted April 25, 2015 Awesome! Quote Link to comment Share on other sites More sharing options...
raidernick Posted April 26, 2015 Author Share Posted April 26, 2015 I finished the normal maps and I made a fairing for Salyut-1. Each station had it's own unique fairing type and color so there are a variety to make still. Also I need to do the briz-m and blok-d plus the fairings and adapters for those. I will likely release this current version of the proton with just the fairings for the stations after KSP1.0 so people can at least have something to launch the stations with. Other parts will be released in a different version at a later time. Quote Link to comment Share on other sites More sharing options...
sp1989 Posted April 26, 2015 Share Posted April 26, 2015 I finished the normal maps and I made a fairing for Salyut-1. Each station had it's own unique fairing type and color so there are a variety to make still. Also I need to do the briz-m and blok-d plus the fairings and adapters for those. I will likely release this current version of the proton with just the fairings for the stations after KSP1.0 so people can at least have something to launch the stations with. Other parts will be released in a different version at a later time.http://i.imgur.com/Ui9skg5.pnghttp://www.spacefacts.de/graph/salyut/salyut/salyut-1_1.jpgOh wow ok! I thought the fairings went over the whole station! That makes sense. Is that how they launched the Mir modules too? Quote Link to comment Share on other sites More sharing options...
Sampa Posted April 26, 2015 Share Posted April 26, 2015 so, you decided to make your own proton, raidernick? COOL! Quote Link to comment Share on other sites More sharing options...
raidernick Posted April 26, 2015 Author Share Posted April 26, 2015 Oh wow ok! I thought the fairings went over the whole station! That makes sense. Is that how they launched the Mir modules too?Sorta, Salyut 4,6,7 and MIR modules fairings covered the first 2 segments of the station. The Salyut 1 fairings covered only the first segment and the Almaz fairings covered the entire station.so, you decided to make your own proton, raidernick? COOL!I always had planned to make my own. Infact I have had this done for almost a year already but had no textures for it. I didn't want to do them myself and was looking for someone else to help. I waited for 5 months with no response from them since so I decided to just bang it out myself quickly. Quote Link to comment Share on other sites More sharing options...
sp1989 Posted April 26, 2015 Share Posted April 26, 2015 Sorta, Salyut 4,6,7 and MIR modules fairings covered the first 2 segments of the station. The Salyut 1 fairings covered only the first segment and the Almaz fairings covered the entire station.I always had planned to make my own. Infact I have had this done for almost a year already but had no textures for it. I didn't want to do them myself and was looking for someone else to help. I waited for 5 months with no response from them since so I decided to just bang it out myself quickly.You are being very modest! Those textures look amazing! Way better than bobcats, and I would say very close to dennys. I could kiss your butt and say it looks better than dennys but we all know dennys models are on a whole other level. Quote Link to comment Share on other sites More sharing options...
raidernick Posted April 26, 2015 Author Share Posted April 26, 2015 Just finished the Almaz fairing, up next are the Salyut 4,6,7 fairings. Quote Link to comment Share on other sites More sharing options...
raidernick Posted April 26, 2015 Author Share Posted April 26, 2015 Here are the last 3 fairings for Salyut 4, 6 and 7. I may or may not finish Block D before Monday, if I don't I will still release the proton as it is now with the updated pack for KSP v1.0. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.