RomanCat Posted July 17, 2016 Share Posted July 17, 2016 1 hour ago, eberkain said: This does not seem to hide when the rest of the UI does, any way to fix that? You can see in these shots its still visible while everything else is gone. https://drive.google.com/open?id=0B_wAo_KZdHCrODFlZHUxclUyYTA Autohide is ON? Try. Quote Link to comment Share on other sites More sharing options...
eberkain Posted July 18, 2016 Share Posted July 18, 2016 8 hours ago, RomanCat said: Autohide is ON? Try. I have looked and looked through the options and I don't see anything, can you be more specific on what you mean? Quote Link to comment Share on other sites More sharing options...
RomanCat Posted July 18, 2016 Share Posted July 18, 2016 (edited) 16 hours ago, eberkain said: I have looked and looked through the options and I don't see anything, can you be more specific on what you mean? Spoiler Screen Edited July 18, 2016 by RomanCat Quote Link to comment Share on other sites More sharing options...
eberkain Posted July 19, 2016 Share Posted July 19, 2016 I had my button on Blizzy's Toolbar, I change it to the setting you indicated, makes no difference when taking a screenshot. Quote Link to comment Share on other sites More sharing options...
RomanCat Posted July 22, 2016 Share Posted July 22, 2016 On 19.07.2016 at 2:37 PM, eberkain said: I had my button on Blizzy's Toolbar, I change it to the setting you indicated, makes no difference when taking a screenshot. Very strange. I try with this mod. Quote Link to comment Share on other sites More sharing options...
RomanCat Posted July 24, 2016 Share Posted July 24, 2016 eberkain Before you take a screenshot, press F2. Then F1. And use the latest versions of mods. ALRP - 2.8.1.0 and Historian 1.2.5 http://imgur.com/a/lpg0H Quote Link to comment Share on other sites More sharing options...
Bloojay Posted July 29, 2016 Share Posted July 29, 2016 if you're squad staff why is this a mod :V Quote Link to comment Share on other sites More sharing options...
TriggerAu Posted July 30, 2016 Author Share Posted July 30, 2016 On 29/07/2016 at 2:41 PM, Bloojay said: if you're squad staff why is this a mod :V Cause I wrote it before I was brought on board Quote Link to comment Share on other sites More sharing options...
Bloojay Posted July 30, 2016 Share Posted July 30, 2016 11 minutes ago, TriggerAu said: Cause I wrote it before I was brought on board that still doesn't answer my question Quote Link to comment Share on other sites More sharing options...
TriggerAu Posted July 30, 2016 Author Share Posted July 30, 2016 K, sorry. Cause I wrote it before working for Squad, and it's not been chosen to be implemented by the peeps in charge at this point. Would be nice if it could be, but not yet on the list Quote Link to comment Share on other sites More sharing options...
Snark Posted July 30, 2016 Share Posted July 30, 2016 On 7/28/2016 at 9:41 PM, Bloojay said: if you're squad staff why is this a mod :V Also, Bloojay, just because someone's a Squad staff member doesn't mean that everything they write necessarily goes into the stock game. RoverDude, for example, has lots of mods, to take perhaps the best known example, though other staff members have mods as well. Quote Link to comment Share on other sites More sharing options...
Deimos Rast Posted August 2, 2016 Share Posted August 2, 2016 because squad staff are also individuals who might have different artistic visions that fall outside the purview of what SQUAD considers necessary to maintain a good baseline product. Consider RoverDude's WarpDrive mod for example, or TriggerAu's TransferWindow planner. But enough on that. @TriggerAu I'm sure you've been busy with the bug tracker business, but any progress on the "replace stock panel" thinger? Obviously a minor issue, but I figured I'd ask since I was here. Quote Link to comment Share on other sites More sharing options...
TriggerAu Posted August 3, 2016 Author Share Posted August 3, 2016 5 hours ago, Deimos Rast said: because squad staff are also individuals who might have different artistic visions that fall outside the purview of what SQUAD considers necessary to maintain a good baseline product. Consider RoverDude's WarpDrive mod for example, or TriggerAu's TransferWindow planner. But enough on that. @TriggerAu I'm sure you've been busy with the bug tracker business, but any progress on the "replace stock panel" thinger? Obviously a minor issue, but I figured I'd ask since I was here. Damn! Totallylost track of that in the noise. Sorry guys will look tonight Quote Link to comment Share on other sites More sharing options...
TriggerAu Posted August 6, 2016 Author Share Posted August 6, 2016 I gave up on trying to repro the issue with the stock app and have made changes to it to use a similar process to DMagic. It works for me - but as I said I don't see it broken. I also added some math to the Stock positioning so it takes into account the scaling, but you may not see it until the next scene change. Rather than push it to all straight away to the public here is a GitHub release with these two - if its all good I'll nail up a real one - https://github.com/TriggerAu/AlternateResourcePanel/releases/tag/v2.8.1.1 If a few peopel could have a go at replacing the stock app to see if this solves that isue it would be much appreciated. Quote Link to comment Share on other sites More sharing options...
Deimos Rast Posted August 6, 2016 Share Posted August 6, 2016 8 hours ago, TriggerAu said: I gave up on trying to repro the issue with the stock app and have made changes to it to use a similar process to DMagic. It works for me - but as I said I don't see it broken. I also added some math to the Stock positioning so it takes into account the scaling, but you may not see it until the next scene change. Rather than push it to all straight away to the public here is a GitHub release with these two - if its all good I'll nail up a real one - https://github.com/TriggerAu/AlternateResourcePanel/releases/tag/v2.8.1.1 If a few peopel could have a go at replacing the stock app to see if this solves that isue it would be much appreciated. it seems to be just source code, and also says KSP 1.1.2... thanks for working on it by the way Quote Link to comment Share on other sites More sharing options...
TriggerAu Posted August 7, 2016 Author Share Posted August 7, 2016 Sorry guys, it was listed in github, but then not showing up in the page when you view it . Ive removed and readded the zipa nd it looks better to me now Quote Link to comment Share on other sites More sharing options...
Drew Kerman Posted August 11, 2016 Share Posted August 11, 2016 (edited) On 8/6/2016 at 9:06 AM, TriggerAu said: If a few peopel could have a go at replacing the stock app to see if this solves that isue it would be much appreciated. uhhhhmmm I tried the new version and it didn't work for me, but I could have sworn the previous version worked fine (only upgraded to check out the scaling compatibility) but when I downgraded to the folder I removed (always save recent past versions) it still didn't work at replacing the stock app. I really thought it did work for me originally. Hrm. (only had KAC, ARP, and some USI mods and Toolbar installed) A few mins later... wait wait I got it to work. Deleting and trying to recreate Test #1: ok with the recent version new install of the mod selecting the stock replace option does not work. Then selecting the app launcher creates a second button. Then trying to switch back to stock replace doesn't work Test #2: Yup ok when I deleted the settings.cfg after reverting to my old install of the mod it worked fine as intended - switching to stock replace took out the app launcher button and replaced the stock button. Wait... no - dammit. It didn't hold. When I restarted the game the stock button was back and there was an app launcher button for ARP. Setting was still set to stock replace. Switching back to app launcher made a 2nd button but then switching back to stock replace removed the 2nd button and replaced the stock app. But that didn't hold either on restart (did a scene change before Alt-F4) But wait! There's more! Yes, I realized that when I went into the flight scene, exited out to the space center and re-entered the flight scene, the stock button is now replaced by ARP Edited August 11, 2016 by Gaiiden Quote Link to comment Share on other sites More sharing options...
teamyoyo Posted August 20, 2016 Share Posted August 20, 2016 Please correct me if I missed something but would it be possible to be able to resize the GUI. I have a 4K screen and ARP can be hard to read. The ablity to increase ( and decrease for smaller screens ) would be great. Thanks. Quote Link to comment Share on other sites More sharing options...
Rob2222 Posted September 13, 2016 Share Posted September 13, 2016 (edited) @TriggerAu Could we maybe change the colors of USI-Mulch (orange) and USI-Fertilizer (blue) to the inverse? Cause on the USI-Containers Fertilizer has a orange drawing, so that would be more intuitive. BR Rob Edited September 13, 2016 by Rob2222 Quote Link to comment Share on other sites More sharing options...
Fwiffo Posted September 14, 2016 Share Posted September 14, 2016 (edited) On 5/4/2016 at 11:23 PM, Fwiffo said: Whoot! Hopefully all these new builds will make my KAC+ARP+64-bit issue go away at the same time. On 5/5/2016 at 5:38 PM, TriggerAu said: I am hoping so @Fwiffo Just noticed your latest release, so I retested the below under KSP 1.1.3 with ARP v2.8.1.1 and KAC 3.7.1, and to my immense joy am no longer able to reproduce the issue I reported back in November last year (and which @Motokid600 had confirmed). I don't know if it's something you did, or the multithreading improvements made in 1.1.x, but after nearly a year without it I am thrilled to finally be able to bring the much-missed ARP mod back into my GameData. Yay! Spoiler On 11/26/2015 at 11:51 PM, Fwiffo said: Hi TriggerAu, My Win-x64 KSP installation seems surprisingly stable, except for one intermittent bug which keeps cropping up when high part count ships explode. After a LOT of testing today I've been able to isolate that it only occurs when ALL of the following are installed: Windows 64-bit version of KSP Kerbal Alarm Clock 3.4 Alternate Resource Panel 2.7.3 Although the issue is intermittent, I can reproduce it with reasonable frequency under the conditions above. But if any ONE of these three is taken away, it never happens. i.e. I can run 64-bit KSP, with one (but not both) of your mods, and even add my other 50 or so mods back into the mix, and no matter how hard I try cannot reproduce the issue. As soon as both mods are in place, I can reproduce it within about 1 to 5 tries. Reveal hidden contents I recognize this is a hazardous landmine of unsupported misery, and that a lot of modders are (with good reason) simply refusing to deal with anything that bears the scent of Windows 64-bit. But I'm hoping you might nevertheless have some ideas. I'm not afraid to go hacking at the code myself, if you point me in the right direction. Here's the craft file I've been testing with, and in case that doesn't reproduce it, here's a more complete Environment.zip which also includes my: GameData directory, minus the Squad subtree. (Consists of just the two mods) Savegame and test rocket (persistent.sfs and Crasher2.craft) KSP game settings (settings.cfg) Full log file captures for each permutation (both-installed, one-installed, 32-bit, 64-bit, etc) Steps to reproduce are: Start with pristine KSP 1.0.5.1028 for Windows environment. Drop in the contents of the zip file, to the appropriate location. Replace KSP.exe and KSP_Data\Mono\mono.dll with the forbidden, contraband ones described here. (I can PM these to you if needed) Start KSP.exe, hit Resume Saved, select CrashTest, hit Continue. Click the launchpad (clear / recover any existing craft if needed), select Crasher2.craft and click Launch. Once on the launchpad, max out throttle, enable SAS, and hit Launch (spacebar) Hit Alt + . several times to increment to 4x physics timewarp (helps increase likelihood of collision) Just after liftoff, activate the first stage (space) to try and cause an explosion. The more destruction the better. Seems to happen more often when the noses of the released pylons crash in toward the center stack, rather than when they drift outward. Freeze occurs pretty quickly into the explosions. If it doesn't occur within a few seconds, revert to the launchpad and repeat up to 10 times. I can usually get it to happen within about 1 to 5 tries. You can also try wobbling the craft a bit just before staging. Some other things I've tried / observed: Reveal hidden contents The behavior is identical under both KSP 1.0.4 and 1.0.5.1028. I've only tested on Windows (no convenient access to a Linux box). Haven't been able to reproduce with low part count ships. Seems just as easy to reproduce immediately after launch of KSP as it is after a long time of playing FPS always crawls right before it happens (around 0.5 FPS if measured using GCmonitor) Happens regardless of whether any alarms are set Happens even when x64 version of the game is moved out of the C:\Program Files (x86) directory (thought it might be some kind of weird thunking special handling thing). Tried updating my graphics drivers, no help Reproduced on two different computers with different nVidia cards Happens whether or not you launch directly from KSC or from VAB Editor Alt+Tab behavior to/from game does not seem to affect the issue (no worse / better) Using or not using command line arguments (-force-d3d11, -popupwindow) also seems to have no impact VSync setting doesn't affect Doesn't seem to matter whether the mod windows are shown/hidden. Here are some anomalies I've noticed in my logs over the course of my testing, although after investigation I haven't tied any of them explicitly to the issue: Log highlight 1: Reveal hidden contents [HighLogic]: =========================== Scene Change : From SPACECENTER to FLIGHT (Async) ===================== (Filename: C:/buildslave/unity/build/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 56) 11/26/2015 8:32:49 PM,KerbalAlarmClock,Scene Change from 'SPACECENTER' to 'FLIGHT' (Filename: C:/buildslave/unity/build/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 56) 11/26/2015 8:32:49 PM,KerbalAlarmClock,Active Vessel unreadable - resetting inqueue flag (Filename: C:/buildslave/unity/build/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 56) NullReferenceException: Object reference not set to an instance of an object at KerbalAlarmClock.KerbalAlarmClock.UpdateDetails () [0x00000] in <filename unknown>:0 at KerbalAlarmClock.KerbalAlarmClock.RepeatingWorker () [0x00000] in <filename unknown>:0 at KSPPluginFramework.MonoBehaviourExtended.RepeatingWorkerWrapper () [0x00000] in <filename unknown>:0 (Filename: Line: -1) 11/26/2015 8:32:50 PM,KerbalAlarmClock,Removing DrawGUI from PostRender Queue Log highlight 2 (only in non-freezing): Reveal hidden contents 11/27/2015 12:40:18 AM,KerbalAlarmClock,API Ready (Filename: C:/buildslave/unity/build/artifacts/StandalonePlayerGenerated/UnityEngineDebug.cpp Line: 56) NullReferenceException: Object reference not set to an instance of an object at UIManager.Update () [0x00000] in <filename unknown>:0 at UIManager.DidAnyPointerHitUI () [0x00000] in <filename unknown>:0 at SpaceCenterCamera2.InputCamera () [0x00000] in <filename unknown>:0 at SpaceCenterCamera2.Update () [0x00000] in <filename unknown>:0 (Filename: Line: -1) 11/27/2015 12:40:19 AM,KerbalAlarmClock,Searching for KER I also noticed some messages about VOIDWrappers etc. Are you using generic exception handlers and dynamically wrapping KSP or Unity types (like VOID, KER)? Is it possible that due to either 64-bit or due to using 1.0.4 dll's for compile, there are typename differences resulting in them not being wrapped? Appreciate any help you can offer. I'd also be grateful if another intrepid Windows x64 Kerbalite out there could test this out and confirm whether they see similar behavior. On 12/26/2015 at 0:00 PM, Motokid600 said: Id like to bump this inquiry if I may. I'm experiencing the same thing both on Win64 and the 64bit client on Linux as well. Edited September 14, 2016 by Fwiffo Quote Link to comment Share on other sites More sharing options...
FreeThinker Posted October 13, 2016 Share Posted October 13, 2016 Is this mod compatible with KSP 1.2? Quote Link to comment Share on other sites More sharing options...
TriggerAu Posted October 13, 2016 Author Share Posted October 13, 2016 2 hours ago, FreeThinker said: Is this mod compatible with KSP 1.2? Nope, Got KAC done last night, will try for this and TWP over the weekend Quote Link to comment Share on other sites More sharing options...
Phineas Freak Posted October 13, 2016 Share Posted October 13, 2016 @TriggerAu don't forget to move the settings file so to be compatible with the Module Manager loading system (like you did with KAC)! Quote Link to comment Share on other sites More sharing options...
Draconomial Posted October 13, 2016 Share Posted October 13, 2016 Funny that Olympic1's ARP Icons updated for 1.2, but has this mod as a dependency when it's not compatible yet. Quote Link to comment Share on other sites More sharing options...
Beetlecat Posted October 15, 2016 Share Posted October 15, 2016 On 10/13/2016 at 1:12 PM, Draconomial said: Funny that Olympic1's ARP Icons updated for 1.2, but has this mod as a dependency when it's not compatible yet. Well, there's literally nothing about the ARP icons that would *forbid* them from working in 1.2... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.