CobaltWolf Posted November 24, 2017 Author Share Posted November 24, 2017 10 hours ago, Pappystein said: I get to dl the masters AGAIN. I can't wait to unlock these new parts/textures in my BARIS test build I am currently experimenting with. I am about a million credits and 1000 science away from that point however More stupid useless Tourist and satelite placement launches in my future! Ach, I don't think I did anything for placement or anything like that with the new parts. Quote Link to comment Share on other sites More sharing options...
SomeGuyNamedDave Posted November 24, 2017 Share Posted November 24, 2017 might be further up in the thread, but is there anyway to make the names normal? had a version in 1.2 that had names like apollo but in 1.3 there names like kane. anyway to stop that happening? Quote Link to comment Share on other sites More sharing options...
Pappystein Posted November 24, 2017 Share Posted November 24, 2017 12 hours ago, CobaltWolf said: Ach, I don't think I did anything for placement or anything like that with the new parts. No, it is just with BARIS I have to turn in a crapton of Science to try to keep up with the funding drain! I probably don't have it set up right (It is my first attempt with BARIS and I still don't have a lot of time to play...) Quote Link to comment Share on other sites More sharing options...
CobaltWolf Posted November 25, 2017 Author Share Posted November 25, 2017 10 hours ago, SomeGuyNamedDave said: might be further up in the thread, but is there anyway to make the names normal? had a version in 1.2 that had names like apollo but in 1.3 there names like kane. anyway to stop that happening? Grab the RealNames.cfg from the extras folder. Quote Link to comment Share on other sites More sharing options...
planeguy868 Posted November 25, 2017 Share Posted November 25, 2017 (edited) Hi @CobaltWolf, been a long-time user of this mod (mainly for the ETS parts/Saturn Multibody). I recently updated to the newest version of BDB, and I'm getting a weird texture bug on a lot of the parts. I attached a screenshot that sorta shows what's going on. Some of the parts appear to be partially highlighted in-flight, almost like a specular map bug. When I'm in the hangar, that issue persists, until I mouse over the parts in question, and they go back to normal. Have you seen this before? Edit: I have been able to replicate this bug on a stock install, with just BDB and required mods installed. Also @Drakenex I've seen you mention a Github repository a couple of times on here, is that just the BDB Git, or is there another one with more dank textures? Edited November 25, 2017 by planeguy868 Quote Link to comment Share on other sites More sharing options...
Drakenex Posted November 25, 2017 Share Posted November 25, 2017 (edited) 2 hours ago, planeguy868 said: Also @Drakenex I've seen you mention a Github repository a couple of times on here, is that just the BDB Git, or is there another one with more dank textures? My bad! never created a merge request While I remember how to do that, get it here I still think that the Saturn MB looks better with Atlas V like insulation (looks like polished cooper) than orange foam, so that's the look I've tried to achieve, any feed back will be appreciated. Edited November 25, 2017 by Drakenex Quote Link to comment Share on other sites More sharing options...
donalddahlen Posted November 25, 2017 Share Posted November 25, 2017 Cool Mod. When its finish? Quote Link to comment Share on other sites More sharing options...
planeguy868 Posted November 25, 2017 Share Posted November 25, 2017 2 hours ago, Drakenex said: My bad! never created a merge request While I remember how to do that, get it here I still think that the Saturn MB looks better with Atlas V like insulation (looks like polished cooper) than orange foam, so that's the look I've tried to achieve, any feed back will be appreciated. In-universe that makes a lot more sense, too. The Saturn Multibody is kerolox, like the Atlas, as opposed to hydrolox like the Shuttle ET. I'll give it a spin! Quote Link to comment Share on other sites More sharing options...
SomeGuyNamedDave Posted November 26, 2017 Share Posted November 26, 2017 On 25/11/2017 at 1:08 AM, CobaltWolf said: Grab the RealNames.cfg from the extras folder. Cheers Quote Link to comment Share on other sites More sharing options...
notJebKerman Posted November 26, 2017 Share Posted November 26, 2017 On 11/25/2017 at 11:46 AM, planeguy868 said: Hi @CobaltWolf, been a long-time user of this mod (mainly for the ETS parts/Saturn Multibody). I recently updated to the newest version of BDB, and I'm getting a weird texture bug on a lot of the parts. I attached a screenshot that sorta shows what's going on. Some of the parts appear to be partially highlighted in-flight, almost like a specular map bug. When I'm in the hangar, that issue persists, until I mouse over the parts in question, and they go back to normal. Have you seen this before? Edit: I have been able to replicate this bug on a stock install, with just BDB and required mods installed. Also @Drakenex I've seen you mention a Github repository a couple of times on here, is that just the BDB Git, or is there another one with more dank textures? This has been happening since I first installed BDB back in 1.1.3. It doesn't really bother me that much, but it's really visible without ambient light... Quote Link to comment Share on other sites More sharing options...
CobaltWolf Posted November 26, 2017 Author Share Posted November 26, 2017 (edited) Another move, another apartment! However, hopefully this one will be my home for more than a year... I am still unpacking, but taking a quick break right now to respond to some posts... On 11/25/2017 at 8:40 AM, Drakenex said: My bad! never created a merge request While I remember how to do that, get it here I still think that the Saturn MB looks better with Atlas V like insulation (looks like polished cooper) than orange foam, so that's the look I've tried to achieve, any feed back will be appreciated. On 11/25/2017 at 10:56 AM, planeguy868 said: In-universe that makes a lot more sense, too. The Saturn Multibody is kerolox, like the Atlas, as opposed to hydrolox like the Shuttle ET. I'll give it a spin! Makes sense, but to my knowledge the Multibody's orange IS foam. But considering how small the extra texture to create the Multibody was... this gives me an idea... On 11/25/2017 at 9:03 AM, donalddahlen said: Cool Mod. When its finish? Uhm, not sure what you mean? The 1.0 release was over a year ago. These days it's just occasional updates that add new or revamped parts, general polish, etc. On 11/25/2017 at 5:46 AM, planeguy868 said: Hi @CobaltWolf, been a long-time user of this mod (mainly for the ETS parts/Saturn Multibody). I recently updated to the newest version of BDB, and I'm getting a weird texture bug on a lot of the parts. I attached a screenshot that sorta shows what's going on. Some of the parts appear to be partially highlighted in-flight, almost like a specular map bug. When I'm in the hangar, that issue persists, until I mouse over the parts in question, and they go back to normal. Have you seen this before? Edit: I have been able to replicate this bug on a stock install, with just BDB and required mods installed. Also @Drakenex I've seen you mention a Github repository a couple of times on here, is that just the BDB Git, or is there another one with more dank textures? 4 hours ago, notJebKerman said: This has been happening since I first installed BDB back in 1.1.3. It doesn't really bother me that much, but it's really visible without ambient light... Alright, so that's not a 'bug' per say. It's a setting in the material, for rim lighting, which is Unity/KSP's name for an approximation of fresnel reflections - incidentally, many games (Fallout 4 especially comes to mind) add intense rim lighting to character models which is why they look so strange in the dark. I originally made it too intense on the Saturn parts, but thought I had fixed it. Additionally, some parts might not have it set in their material yet. However, @notJebKerman that image in your screenshot contains a broken normal map for the service module. When did you last download BDB? I know I have accidentally uploaded them to the GitHub several times (long story, basically I need to convert them externally before exporting the parts in game and sometimes I forget) but I thought right now the files would be fine. If it helps at all, this is the level of rim lighting that things should have when I'm not messing up (see the bottom right of the module): Edited November 26, 2017 by CobaltWolf Quote Link to comment Share on other sites More sharing options...
planeguy868 Posted November 26, 2017 Share Posted November 26, 2017 (edited) 14 minutes ago, CobaltWolf said: Alright, so that's not a 'bug' per say. It's a setting in the material, for rim lighting, which is Unity/KSP's name for an approximation of fresnel reflections - incidentally, many games (Fallout 4 especially comes to mind) add intense rim lighting to character models which is why they look so strange in the dark. I originally made it too intense on the Saturn parts, but thought I had fixed it. Additionally, some parts might not have it set in their material yet. However, @notJebKerman that image in your screenshot contains a broken normal map for the service module. When did you last download BDB? I know I have accidentally uploaded them to the GitHub several times (long story, basically I need to convert them externally before exporting the parts in game and sometimes I forget) but I thought right now the files would be fine. If it helps at all, this is the level of rim lighting that things should have when I'm not messing up (see the bottom right of the module): Thanks for clearing that up! I haven't noticed it on all of the parts, so far I've seen it on the S-IVB tank, engine mount, and 3.75m Saturn 1C/Multibody interstage fairing that I use most often, but it's definitely not on everything. Maybe the older model files for the Saturn parts are being used? Edited November 26, 2017 by planeguy868 Quote Link to comment Share on other sites More sharing options...
CobaltWolf Posted November 26, 2017 Author Share Posted November 26, 2017 7 minutes ago, planeguy868 said: Thanks for clearing that up! I haven't noticed it on all of the parts, so far I've seen it on the S-IVB tank, engine mount, and 3.75m Saturn 1C/Multibody interstage fairing that I use most often, but it's definitely not on everything. Maybe the older model files for the Saturn parts are being used? Hrmm, it could be that I haven't re-exported certain parts since then. Rest assured that the S-IVB got some touchups and will have new models in the upcoming release. Quote Link to comment Share on other sites More sharing options...
Drakenex Posted November 26, 2017 Share Posted November 26, 2017 3 hours ago, CobaltWolf said: Another move, another apartment! However, hopefully this one will be my home for more than a year... I am still unpacking, but taking a quick break right now to respond to some posts... Makes sense, but to my knowledge the Multibody's orange IS foam. But considering how small the extra texture to create the Multibody was... this gives me an idea... Good luck with that! I've moved like 6 times while in college yes, please do both! Quote Link to comment Share on other sites More sharing options...
CobaltWolf Posted November 26, 2017 Author Share Posted November 26, 2017 2 minutes ago, Drakenex said: Good luck with that! I've moved like 6 times while in college yes, please do both! I only stayed 4 places, but then when I graduated this past June I moved home for 4 months, then to a temporary living situation at a place my company provided, and now into a studio by myself. Quote Link to comment Share on other sites More sharing options...
CobaltWolf Posted November 28, 2017 Author Share Posted November 28, 2017 I thought I had uploaded the Saturn Multibody files over a week ago... apparently I didn't. They're up on Github now. Quote Link to comment Share on other sites More sharing options...
Abrecan Posted November 29, 2017 Share Posted November 29, 2017 Just want to post real quick and say that BDB + KSP 2.5x = LOVEEEEEEEEEEE First time actually playing 2.5x (took a break) but now I'm gladly addicted again! Quote Link to comment Share on other sites More sharing options...
wallum61 Posted November 30, 2017 Share Posted November 30, 2017 When using the rescale.cfg it appears that the Skylab parts are not rescaled equally... I think I've amended the config on my rig; shall I fork it on GH? Another point is that the H-1C/D engines do not have enough thrust to take off. Yet again, I think I've added a relevant fix. See previous question. Quote Link to comment Share on other sites More sharing options...
Abpilot Posted November 30, 2017 Share Posted November 30, 2017 (edited) There is a problem with the honakuli orbital workshop (i think that’s how its said) the telescope is meant to be on a pivot so it may rotate to its position but i carnt do that . Edited November 30, 2017 by Abpilot Quote Link to comment Share on other sites More sharing options...
Hay Posted November 30, 2017 Share Posted November 30, 2017 3 hours ago, Abpilot said: There is a problem with the honakuli orbital workshop (i think that’s how its said) the telescope is meant to be on a pivot so it may rotate to its position but i carnt do that . You're supposed to manually dock the ATM with the MDA. If you want a pivoting ATM download @raidernick's Skylab. Quote Link to comment Share on other sites More sharing options...
Abpilot Posted November 30, 2017 Share Posted November 30, 2017 8 hours ago, Hay said: You're supposed to manually dock the ATM with the MDA. If you want a pivoting ATM download @raidernick's Skylab. Ok is @raidernick‘s skylab even compatible with the Saturn lifter? Quote Link to comment Share on other sites More sharing options...
CobaltWolf Posted November 30, 2017 Author Share Posted November 30, 2017 (edited) will try to respond to other posts later, but right now I just want to say that, now that I am able to stream again, I'd like to try and have a short (2-3 hour) dev stream tonight starting around 7 PM Eastern. on mobile so i can't grab the link but the Twitch ID is CobaltWolfy. Edited November 30, 2017 by CobaltWolf Quote Link to comment Share on other sites More sharing options...
Jay The Amazing Toaster Posted December 1, 2017 Share Posted December 1, 2017 BDB stream!!https://www.twitch.tv/cobaltwolfy Quote Link to comment Share on other sites More sharing options...
Drakenex Posted December 1, 2017 Share Posted December 1, 2017 4 hours ago, Abpilot said: Ok is @raidernick‘s skylab even compatible with the Saturn lifter? PM sent Quote Link to comment Share on other sites More sharing options...
Abpilot Posted December 1, 2017 Share Posted December 1, 2017 2 minutes ago, Drakenex said: PM sent Ok thx how did cobalt wolf het the idea that the scope was manually docked Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.