Jump to content

[1.12.5] Bluedog Design Bureau - Stockalike Saturn, Apollo, and more! (v1.14.0 "металл" 30/Sep/2024)


CobaltWolf

Recommended Posts

1 minute ago, golkaidakhaana said:

I think I going insane crazy ! I swore there was some discussion months ago about Nertea Restock - style foil variants for the Ranger probe cores ? I ve looked through the thread and I can t find any discussion relating to this , could I be mis-remembering ??

look in the BDBNIC thread

Link to comment
Share on other sites

  

On 4/8/2021 at 2:02 AM, OrbitalManeuvers said:

I have two minor plume issues, can anyone confirm? The Inon engine mount shows no RCS plumes, and the Leo "Gus" thrusters show a translate forward RCS plume, but not an engine plume with the throttle.  I'm on 1.11.2, BDB-github. Waterfall RCS plumes seem to be working fine on other parts.

Fixed both on github now.

On 4/16/2021 at 7:27 PM, somnambulist said:

I'm also missing plumes on the LR9107-167 (will log a github issue)

I cant reproduce this issue. Tested both versions of the engine.

Link to comment
Share on other sites

1 minute ago, CobaltWolf said:

Stream done, some progress on the LM. Mesh is in a much better place now. More greebles to add and lots and lots of texturing to do yet.

DPiv8ED.png

Amazing! Even though it is still WIP

Edited by Naeth Kerman
Link to comment
Share on other sites

9 minutes ago, Zorg said:

Mostly finished M1. A few tweaks still needed and the emissives for all 4 engines still pending but they're approaching completion :)

 

To quote an old movie.

DANG MAN! 

That is some serious engine :D

 

Link to comment
Share on other sites

UPDATE - BDB v 1.7.3 "огромный"
 

 

 

DOWNLOAD (SpaceDock)

DOWNLOAD (GitHub)

BDB is also available on CKAN but it usually takes a little while for an update to index and be available.


Bluedog Design Bureau v1.7.3 is now live! This is just a bug fix update.

Changelog:

 

v1.7.3  "огромный"

Bug fixes and tweaks
- fix Gemini lander engine waterfall plume
- Fix some typos
- Fix system heat patch not applying to SNTP 45.
- Give 5m DCSS colliders some more breathing room so it works better with thicker interstages from other mods.
- Fix Waterfall plumes for Dual Engine Centaur mount, Vega GGE405H vernier and Gemini OAMS.
- remove throttle response from small probe engine using hydrazine WF plume.
- Fix Gemini drogue chute inverted mesh.
- Fix Mercury LES orientation.
- Fix Gemini Lander low profile docking port orientation to match indexing key on new Gemini.

 

 

Edited by Zorg
Link to comment
Share on other sites

2 hours ago, Marlon Kerman said:

All of the RL10s , RD 180, A-7 , F1 , J2 , both the LM Engines and all of the LR engines. 

This sounds like a bad install to be honest. Please remove BDB and all its dependencies and carefully reinstall everything in the release bundle. If the problem still exists please provide a screenshot of your gamedata folder, and a copy of you module manager.configcache which is inside your main KSP folder  Kerbal Space Program/Logs/ModuleManager.

Please also confirm which version of BDB and KSP you are running.

Edited by Zorg
Link to comment
Share on other sites

Logs onto KSP forums.

Goes to BDB Forum Page

Goes to BDB Dev

Checks Git-hub notes for latest information

Sees a new release has been had...

sees no mention of new engines

*CRASH*  

Picks up computer off of floor, makes coffee, cries in coffee.

 

:P

I am kidding!   But that is my level of "want" on a certain set of beautiful engines.   :D

I has planz to show why the Saturn II INT-17 is a joke.  Can't do it without the RL-20 being it is an HG-3 analog.

Oh and Saturn II INT-18 + 3 segment SRMU FTW! :D

and congrats team on the incremental update :D   Some well needed changes

 

 

 

Edited by Pappystein
Link to comment
Share on other sites

1 minute ago, Pappystein said:

Logs onto KSP forums.

Goes to BDB Forum Page

Goes to BDB Dev

Checks Git-hub notes for latest information

Sees a new release has been had...

sees no mention of new engines

*CRASH*  

Picks up computer off of floor, makes coffee, cries in coffee.

 

:P

I am kidding!   But that is my level of "want" on a certain set of beautiful engines.   :D

I has planz to show why the Saturn II INT-17 is a joke.  Can't do it without the RL-20 being it is an HG-3 analog.

Oh and Saturn II INT-18 + 3 segment SRMU FTW! :D

 

 

 

lol what are the INT-17/18? I only know INT-20/21

Link to comment
Share on other sites

16 hours ago, derega16 said:

Wait there is M-1sl ?

Eh, there were lots of proposals for what to do with M-1.   Sea Level,   Very large Expansion bell, I think I saw a document about Airmat extending bell as well but going from memory on that.

 

10 minutes ago, Starhelperdude said:

lol what are the INT-17/18? I only know INT-20/21

Saturn II was a series of 3 proposals..   I wrote a quick and dirty history piece about 16 days ago on it.  

Saturn II INT-17 was the "Theoretical" potential with a new "Theoretical" engine that was called HG-3 in ONE series of papers.   As TJ and Zorg have pointed out, there was no real HG-3 just a bunch of papers theorizing on engine of such and such performance could be built and one company called that engine HG-3.

INT-17 would be a S-II stage with 7 "HG-3 Engines"   And a standar S-IVB stage.   both the S-II and S-IVB stages would be at a reduced fuel load.   And the stack could launch an Apollo Capsule into LEO much like the Saturn IB but cheaper (assuming Saturn V was still in production)

INT-18 is a standard S-II stage with 5 J-2S or J-2S-SL engines, and 2, 4 or 5 UA-1204, UA-1205 or UA-1207 SRMs.   Full fuel and depending on ground lit or airborne lit J-2s could lift a heck of a lot more to LEO than Saturn IB or even the ETS Saturn IE and IFs could

INT-19 is the same as INT-18 substituting up to 12 Minuteman TU-122 engines for the UA-120x SRMs.   The Payload would trade fuel load again (none of the INT-19s would fly with a full fuel load, just like the INT-17 and SOME of the INT-18 combinations)

 

https://en.wikipedia.org/wiki/Saturn_II

 

Oh and a 4x SRMU(3seg) booster for an INT-18 would be a giant lifter... Almost the Payload capacity of Saturn V by my estimate

 

Edited by Pappystein
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...