Jump to content

[WIP] Coatl Aerospace ProbesPlus Dev Thread [Beta] 10/19/2020 (1.8-1.10)


akron

Recommended Posts

On 8/13/2017 at 6:04 AM, DDE said:

@akron, let the pruning begin! I'm honestly in this just because DMagic and SCANSAT parts are ugly.

Don't remove those mods or my parts will not work. Those parts just need an art update. They've been unchanged for many KSP versions. I was actually looking at re-doing the SCANsat parts but work keeps me too busy as of late. Eventually I will, unless someone else gets to them first.

@thekspbegginer the latest Github repo works in 1.3 and includes updated dependencies

Link to comment
Share on other sites

6 minutes ago, akron said:

Don't remove those mods or my parts will not work.

Oh, trust me, I know what I'm doing.

Spoiler

//RTGs
@PART[ca_rtg2000]:FINAL
{
	%MODULE[ModuleGenerator]
	{
		%OUTPUT_RESOURCE
		{
			name = ElectricalCharge
			%rate = 0.75
		}
	}
}
@PART[ca_rtg3900]:FINAL
{
	%MODULE[ModuleGenerator]
	{
		%OUTPUT_RESOURCE
		{
			name = ElectricalCharge
			%rate = 2.25
		}
	}
}

//Pruning
!PART[dmUSAccGrav]:FINAL {}
!PART[dmUSAtmosSense]:FINAL {}
!PART[dmUSPresTemp]:FINAL {}
!PART[dmUSScope]:FINAL {}
!PART[dmUSImagingPlatform]:FINAL {}
!PART[dmUSMat]:FINAL {}
!PART[dmUSGoo]:FINAL {}
!PART[dmUSGoreSat]:FINAL {}
!PART[dmUSAsert]:FINAL {}
!PART[dmReconLarge]:FINAL {}
!PART[dmSIGINT]:FINAL {}
!PART[dmSIGINT.End]:FINAL {}
!PART[dmSIGINT.Small]:FINAL {}
!PART[dmReconSmall]:FINAL {}
!PART[dmSeismicHammer]:FINAL {}
!PART[dmSeismicPod]:FINAL {}
!PART[dmBathymetry]:FINAL {}
!PART[SCANsat_Scanner2]:FINAL {}
!PART[SCANsat_Scanner32]:FINAL {}
!PART[SCANsat_Scanner24]:FINAL {}
!PART[ca_fom_lander]:FINAL {}
!PART[ca_vor_tank]:FINAL {}
!PART[ca_vor_sp2]:FINAL {}
!PART[ca_vor_sp]:FINAL {}
!PART[ca_vor_sep1]:FINAL {}
!PART[ca_vor_sar]:FINAL {}
!PART[ca_vor_mptank]:FINAL {}
!PART[ca_vor_engine]:FINAL {}
!PART[ca_vor_dish]:FINAL {}
!PART[ca_vor_core]:FINAL {}
!PART[ca_fom_sp]:FINAL {}
!PART[ca_fom_parachute]:FINAL {}
!PART[ca_fom_heatS]:FINAL {}
!PART[ca_vor_comm]:FINAL {}
!PART[ca_fom_drogue]:FINAL {}
!PART[ca_ESM2]:FINAL {}
!PART[ca_ESM]:FINAL {}
!PART[ca_torekkaPM]:FINAL {}
!PART[ca_torekka_truss]:FINAL {}
!PART[ca_louver_s]:FINAL {}
!PART[ca_louver_m]:FINAL {}
!PART[ca_louver_s2]:FINAL {}
!PART[ca_gravioli]:FINAL {}
!PART[ca_accelerometer]:FINAL {}
!PART[ca_thermometer]:FINAL {}
!PART[ca_tank_mp_m]:FINAL {}
!PART[ca_tank_lfo_m]:FINAL {}
!PART[ca_trident]:FINAL {}
!PART[ca_linkor]:FINAL {}
!PART[ca_lahar]:FINAL {}
!PART[ca_jib]:FINAL {}
!PART[ca_tank_mp_s]:FINAL {}
!PART[ca_battery_m]:FINAL {}
!PART[ca_battery_l]:FINAL {}
!PART[sp_odyssey_b]:FINAL {}
!PART[sp_odyssey_a]:FINAL {}
!PART[sp_maven]:FINAL {}
!PART[sp_mariner_b]:FINAL {}
!PART[sp_mariner_a]:FINAL {}
!PART[sp_express_b]:FINAL {}
!PART[sp_express_a]:FINAL {}
!PART[ca_rtg8200]:FINAL {}
!PART[ca_battery_s]:FINAL {}
!PART[ca_rw_xsmall]:FINAL {}
!PART[ca_rw_small]:FINAL {}
!PART[ca_rw_medium]:FINAL {}
!PART[ca_rw_large]:FINAL {}
!PART[ca_rst]:FINAL {}
!PART[ca_rs04]:FINAL {}
!PART[ca_rs01]:FINAL {}
!PART[ca_RM04]:FINAL {}
!PART[ca_RM03]:FINAL {}
!PART[ca_RM02]:FINAL {}
!PART[ca_RM01]:FINAL {}
!PART[ca_aacs]:FINAL {}
!PART[ca_startrack]:FINAL {}
!PART[tatsujin]:FINAL {}
!PART[quetzal]:FINAL {}
!PART[barquetta]:FINAL {}
!PART[torekka]:FINAL {}
!PART[antenna_quetzal]:FINAL {}
!PART[ca_ant_gps]:FINAL {}
!PART[antenna_cone_toggle]:FINAL {}
!PART[antenna_cone]:FINAL {}
!PART[dish_tatsujin]:FINAL {}
!PART[dish_S]:FINAL {}
!PART[dish_quetzal]:FINAL {}
!PART[dish_L]:FINAL {}
!PART[dish_deploy_S2]:FINAL {}
!PART[dish_deploy_S]:FINAL {}
!PART[ca_landv_srm]:FINAL {}
!PART[ca_landv_vernier]:FINAL {}
!PART[ca_landv_battery]:FINAL {}
!PART[ca_landv_core]:FINAL {}
!PART[ca_landv_hga]:FINAL {}
!PART[ca_landv_omni]:FINAL {}

 

 

Link to comment
Share on other sites

here a quick and dirty patch for RT and ground ops. think i got all the parts.all u need to do is tweak it and u can use it @akron

//ca_landv_core
@PART[ca_landv_core]:AFTER[CoatlAerospace]:NEEDS[RemoteTech]
{
    %MODULE[ModuleSPU] {
    }
    
    %MODULE[ModuleRTAntennaPassive]    {
        %TechRequired = unmannedTech
        %OmniRange = 3000
        
        %TRANSMITTER {
            %PacketInterval = 0.3
            %PacketSize = 2
            %PacketResourceCost = 15.0
        }
    }
}

//ca_landv_hga
@PART[ca_landv_hga]:AFTER[CoatlAerospace]:NEEDS[RemoteTech]
{
    %MODULE[ModuleSPU] {
    }
    
    %MODULE[ModuleRTAntennaPassive]    {
        %TechRequired = unmannedTech
        %OmniRange = 3000
        
        %TRANSMITTER {
            %PacketInterval = 0.3
            %PacketSize = 2
            %PacketResourceCost = 15.0
        }
    }
}

//ca_landv_orbiter_core
@PART[ca_landv_orbiter_core]:AFTER[CoatlAerospace]:NEEDS[RemoteTech]
{
    %MODULE[ModuleSPU] {
    }
    
    %MODULE[ModuleRTAntennaPassive]    {
        %TechRequired = unmannedTech
        %OmniRange = 3000
        
        %TRANSMITTER {
            %PacketInterval = 0.3
            %PacketSize = 2
            %PacketResourceCost = 15.0
        }
    }
}

//ca_landv_orbiter_HGA
@PART[ca_landv_orbiter_HGA]:AFTER[CoatlAerospace]:NEEDS[RemoteTech]
{
    %MODULE[ModuleSPU] {
    }
    
    %MODULE[ModuleRTAntennaPassive]    {
        %TechRequired = unmannedTech
        %OmniRange = 3000
        
        %TRANSMITTER {
            %PacketInterval = 0.3
            %PacketSize = 2
            %PacketResourceCost = 15.0
        }
    }
}

//ca_landv_omni
@PART[ca_landv_omni]:AFTER[CoatlAerospace]:NEEDS[RemoteTech]
{
    !MODULE[ModuleDataTransmitter] {}
    
    @MODULE[ModuleAnimateGeneric]
    {
        %allowManualControl = false
    }
    
    %MODULE[ModuleRTAntenna] {
        %Mode0OmniRange =  500000
        %Mode1OmniRange = 2000000
        %EnergyCost = 0.15
        
        %ProgressFxModules = 0
        
        %TRANSMITTER
        {
            %PacketInterval = 0.3
            %PacketSize = 2
            %PacketResourceCost = 15.0
        }
    }
    
    %MODULE[ModuleSPUPassive] {}
}

 

Link to comment
Share on other sites

12 hours ago, sidfu said:

here a quick and dirty patch for RT and ground ops. think i got all the parts.all u need to do is tweak it and u can use it @akron

Very nice! Thank you. And you've given me an idea on how to handle support for tweakscale.

Link to comment
Share on other sites

well what i do when i make a patch is i normaly just use a old one then tweak it much faster. than doing from scratch every time. now i have to do the probe plus ones thats missing rt stuff like the solar panel thats a antanna and such

think i got the last of them for the probe plus.

just put all of them included what was already did

//Support for Coatl Aerospace
//Configs by rakol, komodo, akron

//CA-A01 Ground Plane Antenna
@PART[antenna_tv]:AFTER[CoatlAerospace]:NEEDS[RemoteTech]
{
    !MODULE[ModuleDataTransmitter] {}
    
    @MODULE[ModuleAnimateGeneric]
    {
        %allowManualControl = false
    }
    
    %MODULE[ModuleRTAntenna] {
        %Mode0OmniRange =  500000
        %Mode1OmniRange = 5000000
        %EnergyCost = 0.18
        
        %ProgressFxModules = 0
        
        %TRANSMITTER
        {
            %PacketInterval = 0.3
            %PacketSize = 2
            %PacketResourceCost = 15.0
        }
    }
    
    %MODULE[ModuleSPUPassive] {}
}
//CA-A06 'Quetzal' Omni Antenna
@PART[antenna_quetzal]:AFTER[CoatlAerospace]:NEEDS[RemoteTech]
{
    !MODULE[ModuleDataTransmitter] {}
    
    @MODULE[ModuleAnimateGeneric]
    {
        %allowManualControl = false
    }
    
    %MODULE[ModuleRTAntenna] {
        %Mode0OmniRange =  500000
        %Mode1OmniRange = 1000000
        %EnergyCost = 0.1
        
        %ProgressFxModules = 0
        
        %TRANSMITTER
        {
            %PacketInterval = 0.3
            %PacketSize = 2
            %PacketResourceCost = 15.0
        }
    }
    
    %MODULE[ModuleSPUPassive] {}
}

//CA-KPS KerbNet Position System Antenna
@PART[ca_ant_gps]:AFTER[CoatlAerospace]:NEEDS[RemoteTech]
{
    !MODULE[ModuleDataTransmitter] {}
    
    @MODULE[ModuleAnimateGeneric]
    {
        %allowManualControl = false
    }
    
    %MODULE[ModuleRTAntenna] {
        %Mode0OmniRange =  500000
        %Mode1OmniRange = 1000000
        %EnergyCost = 0.1
        
        %ProgressFxModules = 0
        
        %TRANSMITTER
        {
            %PacketInterval = 0.3
            %PacketSize = 2
            %PacketResourceCost = 15.0
        }
    }
    
    %MODULE[ModuleSPUPassive] {}
}

//CA-A02 Conic Antenna
@PART[antenna_cone_toggle]:AFTER[CoatlAerospace]:NEEDS[RemoteTech]
{
    !MODULE[ModuleDataTransmitter] {}
    
    @MODULE[ModuleAnimateGeneric]
    {
        %allowManualControl = false
    }
    
    %MODULE[ModuleRTAntenna] {
        %Mode0OmniRange =  500000
        %Mode1OmniRange = 1000000
        %EnergyCost = 0.1
        
        %ProgressFxModules = 0
        
        %TRANSMITTER
        {
            %PacketInterval = 0.3
            %PacketSize = 2
            %PacketResourceCost = 15.0
        }
    }
    
    %MODULE[ModuleSPUPassive] {}
}

//CA-A02 Conic Antenna
@PART[antenna_cone]:AFTER[CoatlAerospace]:NEEDS[RemoteTech]
{
    !MODULE[ModuleDataTransmitter] {}
    
    @MODULE[ModuleAnimateGeneric]
    {
        %allowManualControl = false
    }
    
    %MODULE[ModuleRTAntenna] {
        %Mode0OmniRange =  500000
        %Mode1OmniRange = 2000000
        %EnergyCost = 0.15
        
        %ProgressFxModules = 0
        
        %TRANSMITTER
        {
            %PacketInterval = 0.3
            %PacketSize = 2
            %PacketResourceCost = 15.0
        }
    }
    
    %MODULE[ModuleSPUPassive] {}
}

//CAE-A03 Vorona Communication Array
@PART[ca_vor_comm]:AFTER[CoatlAerospace]:NEEDS[RemoteTech]
{
    !MODULE[ModuleDataTransmitter] {}
    
    @MODULE[ModuleAnimateGeneric]
    {
        %allowManualControl = false
    }
    
    %MODULE[ModuleRTAntenna] {
        %Mode0OmniRange =  500000
        %Mode1OmniRange = 2000000
        %EnergyCost = 0.15
        
        %ProgressFxModules = 0
        
        %TRANSMITTER
        {
            %PacketInterval = 0.3
            %PacketSize = 2
            %PacketResourceCost = 15.0
        }
    }
    
    %MODULE[ModuleSPUPassive] {}
}

//CA-A100 Small Dish Antenna
@PART[dish_S]:AFTER[CoatlAerospace]:NEEDS[RemoteTech]
{
    @cost = 1000
    // a bit more money.
    !MODULE[ModuleDataTransmitter] {}
    @MODULE[ModuleAnimateGeneric]
    {
        %allowManualControl = false
    }
    
    %MODULE[ModuleRTAntenna] {
        %Mode0DishRange = 0
        %Mode1DishRange = 36000000000
        // should be good to duna, but only just. Needs testing.
        %EnergyCost = 0.60
        // more energy hungry, but we can use solar in the inner system.
        %DishAngle = 3
        // mega-nerf from 55 deg.
        
        %DeployFxModules = 0
        
        %TRANSMITTER {
            %PacketInterval = 0.3
            %PacketSize = 2
            %PacketResourceCost = 15.0
        }
    }
    
    %MODULE[ModuleSPUPassive] {}
}
//CA-A200 Medium Dish Antenna
@PART[dish_M]:AFTER[CoatlAerospace]:NEEDS[RemoteTech]
{
    @cost = 2000
    // more monies.
    !MODULE[ModuleDataTransmitter] {}
    @MODULE[ModuleAnimateGeneric]
    {
        %allowManualControl = false
    }
    
    %MODULE[ModuleRTAntenna] {
        %Mode0DishRange = 0
        %Mode1DishRange = 70000000000
        // good to dres always, and jool on closer approaches.
        %EnergyCost = 0.29
        // should fit ok in a 0.4 ec/s budget, but worse than higher tech below.
        %DishAngle = 1
        // nerved slightly from 1.5 deg
        
        %DeployFxModules = 0
        
        %TRANSMITTER {
            %PacketInterval = 0.3
            %PacketSize = 2
            %PacketResourceCost = 15.0
        }
    }
    
    %MODULE[ModuleSPUPassive] {}
}

//CA-A300 Large Dish Antenna
@PART[dish_L]:AFTER[CoatlAerospace]:NEEDS[RemoteTech]
{
    @cost = 8000
    // age old balance technique: make the awesome thing expensive.
    !MODULE[ModuleDataTransmitter] {}
    @MODULE[ModuleAnimateGeneric]
    {
        %allowManualControl = false
    }
    
    %MODULE[ModuleRTAntenna] {
        %Mode0DishRange = 0
        %Mode1DishRange = 125000000000
        // should be good out to jool for sure. Unsure what the min range for eeloo is.
        %EnergyCost = 0.21
        // low enough to run on the 0.39 ec/s rtg, better than above.
        %DishAngle = 0.3
        // kept at 0.3, should be a decent trade off.

        %DeployFxModules = 0
        
        %TRANSMITTER {
            %PacketInterval = 0.3
            %PacketSize = 2
            %PacketResourceCost = 15.0
        }
    }
    
    %MODULE[ModuleSPUPassive] {}
}
//CA-A10 Small Folding Dish Antenna
@PART[dish_deploy_S]:AFTER[CoatlAerospace]:NEEDS[RemoteTech]
{
    !MODULE[ModuleDataTransmitter] {}
    @MODULE[ModuleAnimateGeneric]
    {
        %allowManualControl = false
    }
    
    %MODULE[ModuleRTAntenna] {
        %Mode0DishRange = 0
        %Mode1DishRange = 90000000
        // I don’t know what to do with this one; unsure what the application is intended to be.
        %EnergyCost = 0.50
        %DishAngle = 20.0
        
        %DeployFxModules = 0
        
        %TRANSMITTER {
            %PacketInterval = 0.3
            %PacketSize = 2
            %PacketResourceCost = 15.0
        }
    }
    
    %MODULE[ModuleSPUPassive] {}
}

//CA-AD1-R Folding Dish Antenna
@PART[dish_deploy_S2]:AFTER[CoatlAerospace]:NEEDS[RemoteTech]
{
    !MODULE[ModuleDataTransmitter] {}
    @MODULE[ModuleAnimateGeneric]
    {
        %allowManualControl = false
    }

    %MODULE[ModuleRTAntenna] {
        %Mode0DishRange = 0
        %Mode1DishRange = 18000000000
        %EnergyCost = 0.40
        %DishAngle = 20.0

        %DeployFxModules = 0

        %TRANSMITTER {
            %PacketInterval = 0.3
            %PacketSize = 2
            %PacketResourceCost = 15.0
        }
    }

    %MODULE[ModuleSPUPassive] {}
}

//Torekka Probe Core
@PART[torekka]:AFTER[CoatlAerospace]:NEEDS[RemoteTech]
{
    %MODULE[ModuleSPU] {
    }
    
    %MODULE[ModuleRTAntennaPassive]    {
        %TechRequired = unmannedTech
        %OmniRange = 3000
        
        %TRANSMITTER {
            %PacketInterval = 0.3
            %PacketSize = 2
            %PacketResourceCost = 15.0
        }
    }
}
//CAE-L165 'Fomalhaut' Lander Probe
@PART[ca_fom_lander]:AFTER[CoatlAerospace]:NEEDS[RemoteTech]
{
    %MODULE[ModuleSPU] {
    }
    
    %MODULE[ModuleRTAntennaPassive]    {
        %TechRequired = unmannedTech
        %OmniRange = 3000
        
        %TRANSMITTER {
            %PacketInterval = 0.3
            %PacketSize = 2
            %PacketResourceCost = 15.0
        }
    }
}


//barquetta Probe Core
@PART[barquetta]:AFTER[CoatlAerospace]:NEEDS[RemoteTech]
{
    %MODULE[ModuleSPU] {
    }
    
    %MODULE[ModuleRTAntennaPassive]    {
        %TechRequired = unmannedTech
        %OmniRange = 3000
        
        %TRANSMITTER {
            %PacketInterval = 0.3
            %PacketSize = 2
            %PacketResourceCost = 15.0
        }
    }
}
//tatsujin Probe Core
@PART[tatsujin]:AFTER[CoatlAerospace]:NEEDS[RemoteTech]
{
    %MODULE[ModuleSPU] {
    }
    
    %MODULE[ModuleRTAntennaPassive]    {
        %TechRequired = unmannedTech
        %OmniRange = 3000
        
        %TRANSMITTER {
            %PacketInterval = 0.3
            %PacketSize = 2
            %PacketResourceCost = 15.0
        }
    }
}
@PART[dish_tatsujin]:AFTER[CoatlAerospace]:NEEDS[RemoteTech]
{
    @cost = 1150
    // Slightly more than dish_S, although we are similar in specs.
    !MODULE[ModuleDataTransmitter] {}
    @MODULE[ModuleAnimateGeneric]
    {
        %allowManualControl = false
    }
    
    %MODULE[ModuleRTAntenna] {
        %Mode0DishRange = 0
        %Mode1DishRange = 38000000000
        // Boosted to a little more than dish_s
        %EnergyCost = 0.55
        // Tiny bit better than dish_S, but see below.
        %DishAngle = 5
        // Better transmitter, later tech, a bit better cone?
        
        %DeployFxModules = 0
        
        %TRANSMITTER {
            %PacketInterval = 0.2
            // faster interval
            %PacketSize = 4
            // jumbo packets
            %PacketResourceCost = 20.0
            // but more costly to transmit as a trade off.
        }
    }
    
    %MODULE[ModuleSPUPassive] {}
}
//CA-A200 Medium Dish Antenna -- duplicated for new quetzal dish
@PART[dish_quetzal]:AFTER[CoatlAerospace]:NEEDS[RemoteTech]
{
    @cost = 2000
    // more monies.
    !MODULE[ModuleDataTransmitter] {}
    @MODULE[ModuleAnimateGeneric]
    {
        %allowManualControl = false
    }
    
    %MODULE[ModuleRTAntenna] {
        %Mode0DishRange = 0
        %Mode1DishRange = 70000000000
        // good to dres always, and jool on closer approaches.
        %EnergyCost = 0.29
        // should fit ok in a 0.4 ec/s budget, but worse than higher tech below.
        %DishAngle = 1
        // nerved slightly from 1.5 deg
        
        %DeployFxModules = 0
        
        %TRANSMITTER {
            %PacketInterval = 0.3
            %PacketSize = 2
            %PacketResourceCost = 15.0
        }
    }
    
    %MODULE[ModuleSPUPassive] {}
}
@PART[ca_vor_dish]:AFTER[CoatlAerospace]:NEEDS[RemoteTech]
{
    @cost = 1200
    !MODULE[ModuleDataTransmitter] {}
    @MODULE[ModuleAnimateGeneric]
    {
        %allowManualControl = false
    }
    
    %MODULE[ModuleRTAntenna] {
        %Mode0DishRange = 0
        %Mode1DishRange = 38000000000
        %EnergyCost = 0.55
        %DishAngle = 5
        
        %DeployFxModules = 0
        
        %TRANSMITTER {
            %PacketInterval = 0.2
            %PacketSize = 4
            %PacketResourceCost = 20.0
        }
    }
    
    %MODULE[ModuleSPUPassive] {}
}

 

Edited by sidfu
Link to comment
Share on other sites

I'm getting a crash on load with Coatl installed for some reason. Logs and details are here: Fixed this but leaving it here in case anybody else has this problem and doesn't know what's causing it

 

Edited by oniontrain
Link to comment
Share on other sites

On 8/19/2017 at 3:57 PM, oniontrain said:

I'm getting a crash on load with Coatl installed for some reason. Logs and details are here: Fixed this but leaving it here in case anybody else has this problem and doesn't know what's causing it

I didn't see DMagic Animate Generic on your mod list. I hope I didn't miss it. I don't think this would cause a crash though. Did you do anything to fix it? There is also another log in the KSP folder that has more information about the loaded modules and pertinent errors that you'll want to grab next time.

Link to comment
Share on other sites

2 hours ago, akron said:

I didn't see DMagic Animate Generic on your mod list. I hope I didn't miss it. I don't think this would cause a crash though. Did you do anything to fix it? There is also another log in the KSP folder that has more information about the loaded modules and pertinent errors that you'll want to grab next time.

I had the version of it that was packaged with the older version of probesplus, I thought I could just delete it since I had dmagic orbital installed but that wasn't the case. Everything's working fine now though.

Link to comment
Share on other sites

58 minutes ago, oniontrain said:

I had the version of it that was packaged with the older version of probesplus, I thought I could just delete it since I had dmagic orbital installed but that wasn't the case. Everything's working fine now though.

I think it's become a common misconception that having DMOS solves the DMAnimate dependency.

Link to comment
Share on other sites

31 minutes ago, notJebKerman said:

@akron So now that Surveyors are more or less complete... What's next? Cassini? Ulysses? Galileo? Rovers?

Planetary Surveyor parts were next on the docket. I really wanted to finish Cassini before its EOM next month but I have a big project at work through to October 1, so it will likely not be ready. One of those two will be the next set of parts done

Link to comment
Share on other sites

45 minutes ago, KerBlitz Kerman said:

What about a Beagle 2, Venus Express, Spirit and Opportunity, Maybe even a Curiosity style winch and dropship as well as Venera 2. What do you think @akron?

Lol, yeah that's a lot of parts. Beagle should still be done. Venus Express is done already though. You can build both Express using Tatsujin and the appropriate solar panels. Rovers are not coming for a while. KSP wheels and physics are too painful to deal with. Venera 2 will not be done. I don't see how it would fit in the tech tree with Vega already included (Called Vorona in my mod).

Link to comment
Share on other sites

4 hours ago, akron said:

Lol, yeah that's a lot of parts. Beagle should still be done. Venus Express is done already though. You can build both Express using Tatsujin and the appropriate solar panels. Rovers are not coming for a while. KSP wheels and physics are too painful to deal with. Venera 2 will not be done. I don't see how it would fit in the tech tree with Vega already included (Called Vorona in my mod).

Don't worry too much about Beagle :wink:

Link to comment
Share on other sites

This thread is quite old. Please consider starting a new thread rather than reviving this one.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...