jrodriguez Posted January 27, 2018 Share Posted January 27, 2018 1 minute ago, Sebastiaz said: Nope, it hasn't been re-rooted or anything for that matter, it seems to happen to other planes too.. Did you see that behavior on KSP stock planes? Or if you build a simple plane from scratch? Quote Link to comment Share on other sites More sharing options...
Sebastiaz Posted January 27, 2018 Share Posted January 27, 2018 Just now, jrodriguez said: Did you see that behavior on KSP stock planes? Or if you build a simple plane from scratch? It's fine with stock planes, yet it picks a few particular planes to mess around with. I've tried to see if it's because of part clipping, but it isn't as some of my planes have part clipped in them but spawn in perfectly. Quote Link to comment Share on other sites More sharing options...
TheKurgan Posted February 10, 2018 Share Posted February 10, 2018 I have been having this same sort of issue on occasion, and it does seem to have something to do with the root part. Rebuilding the plane from a new root part seems to fix it... irritating, but I love the mod. Quote Link to comment Share on other sites More sharing options...
Natso Posted February 12, 2018 Share Posted February 12, 2018 (edited) When i spawn vessel , why my plane place at underground?? i'm use 1.3.1 version https://imgur.com/a/8uYVe Edited February 12, 2018 by Natso Quote Link to comment Share on other sites More sharing options...
Agustin Posted February 12, 2018 Share Posted February 12, 2018 (edited) 1 hour ago, Natso said: When i spawn vessel , why my plane place at underground?? i'm use 1.3.1 version https://imgur.com/a/8uYVe mod list? do you use principia? some mods are incompatible with this one Edited February 12, 2018 by Agustin Quote Link to comment Share on other sites More sharing options...
Natso Posted February 12, 2018 Share Posted February 12, 2018 1 minute ago, Agustin said: mod list? do you use principia? some mods are incompatible with this one Here : https://imgur.com/a/k01E1 , that is all Quote Link to comment Share on other sites More sharing options...
Agustin Posted February 12, 2018 Share Posted February 12, 2018 2 minutes ago, Natso said: Here : https://imgur.com/a/k01E1 , that is all try using TAB for changing mode (fine control, large distances moving) and then, ctrol and Shift to go up and down before you release the ship. with control you can place your ship very close to the ground before you place it so it is smoother.... Quote Link to comment Share on other sites More sharing options...
Natso Posted February 12, 2018 Share Posted February 12, 2018 4 minutes ago, Agustin said: try using TAB for changing mode (fine control, large distances moving) and then, ctrol and Shift to go up and down before you release the ship. with control you can place your ship very close to the ground before you place it so it is smoother.... How can i using TAB for craft when i can't spawn it... Quote Link to comment Share on other sites More sharing options...
Natso Posted February 12, 2018 Share Posted February 12, 2018 Now i know why , when i not use "spawn crew" it working and when use it not working Quote Link to comment Share on other sites More sharing options...
KerBlitz Kerman Posted March 23, 2018 Share Posted March 23, 2018 1.4? Quote Link to comment Share on other sites More sharing options...
jrodriguez Posted March 23, 2018 Share Posted March 23, 2018 4 minutes ago, KerBlitz Kerman said: 1.4? 1.4.1? Quote Link to comment Share on other sites More sharing options...
linuxgurugamer Posted March 23, 2018 Share Posted March 23, 2018 Don't bug the modmakers Quote Link to comment Share on other sites More sharing options...
Papa_Joe Posted March 26, 2018 Author Share Posted March 26, 2018 Update after all this time to this thread New release: v1.7 - 1.4 recompile and upgraded to latest Unity - Updated AppLaungher toolbar button to support new Unity Compression. Increased icon size to 128 x 128 Quote Link to comment Share on other sites More sharing options...
Daniel Prates Posted March 26, 2018 Share Posted March 26, 2018 Excelent! Quote Link to comment Share on other sites More sharing options...
Papa_Joe Posted March 26, 2018 Author Share Posted March 26, 2018 (edited) There has been a discussion on feature requests in the BDAc thread concerning Vessel Mover. Just to bring everyone up to speed, I'm working on the following. - Add ability to move Vessel Mover main window. Git Issues #13 and #42 - Correct issue with Vessel Selection where the wrong game save folder is used. Git Issue #31 - Make Window display honor show hide display in flight. Git issue #44 I first wanted to get a working version out there and @jrodriguez had performed the recompile. So 1.7 is that release. I expect to release another update (1.7.1) for these issues within a few hours. Update out: v1.7.1 - Add ability to move Vessel Mover main window. Git Issues #13 and #42 - Correct issue with Vessel Selection where the wrong game save folder is used. Git Issue #31 - Make Window display honor show/hide UI display in flight. Git issue #44 On GitHub and SpaceDock. Enjoy! Edited March 26, 2018 by Papa_Joe New Release Quote Link to comment Share on other sites More sharing options...
Papa_Joe Posted April 26, 2018 Author Share Posted April 26, 2018 New Release: v1.7.2 - Add altitude adjust keys to help window. - Add drop feature to Vessel Move. Git Issue #3 Click Drop to allow vessel to free fall. Enjoy! Working on Crew selection. That will take a bit longer. I can't leverage the KSP dialog, so I will have to "roll my own"... Quote Link to comment Share on other sites More sharing options...
Papa_Joe Posted April 26, 2018 Author Share Posted April 26, 2018 New Release: I left a partially implemented toggle in during development. so I wanted to fix it, but i also included another small tweak. v1.7.2.1 - Altered altitude adjustment to account for speed modes. Height changes now vary with the mode. - Fixed: Choose Crew toggle not implemented yet. Changed to hidden for now. Now you can use the tab key to change the speed of height changes. Quote Link to comment Share on other sites More sharing options...
Papa_Joe Posted April 27, 2018 Author Share Posted April 27, 2018 (edited) New release: I noted very slow behavior in slow and fine speed modes for altitude adjustments. So i fixed it for better response. v1.7.2.2 - Recompiled for KSP 1.4.3 Works in 1.4.x - Fined tuned altitude adjustment for better behavior at low speed modes. This matters when trying to place a very large object in the water and drop it without it breaking up. Enjoy! Edited April 27, 2018 by Papa_Joe Quote Link to comment Share on other sites More sharing options...
ThiccRocketScientist Posted April 27, 2018 Share Posted April 27, 2018 Whenever I spawn anything it just gets thrown below the surface and explodes instantly. I'm not sure if this is a problem with the mod, though it seems more likely to be caused by something else. Any ideas? Quote Link to comment Share on other sites More sharing options...
Papa_Joe Posted April 27, 2018 Author Share Posted April 27, 2018 3 hours ago, ThiccRocketScientist said: Whenever I spawn anything it just gets thrown below the surface and explodes instantly. I'm not sure if this is a problem with the mod, though it seems more likely to be caused by something else. Any ideas? I will need more info to be able to help you. I've tested this in a clean install and in a heavily modded install with no issues. So, if you can provide more detail, a log file, and steps to reliably reproduce the error I will be able to help you. Quote Link to comment Share on other sites More sharing options...
Apollo13 Posted April 29, 2018 Share Posted April 29, 2018 @Papa_Joe Thank you for this mod. I use it along with HyperEdit whenever KSP crappy physics destroys or misplaces a vessel that should have landed safely. I've been using it since it was first created. Quote Link to comment Share on other sites More sharing options...
Drew Kerman Posted May 4, 2018 Share Posted May 4, 2018 (edited) On 4/26/2018 at 4:43 PM, Papa_Joe said: Altered altitude adjustment to account for speed modes. Height changes now vary with the mode. So I'm still on v1.3.1 but seeing this was exciting because it's an annoying limitation I'm stuck with that I look forward to not having to deal with anymore when I upgrade. However I also just remembered that I filed this bug report a while ago and it's currently unsolved but was directly related to this feature. So is this issue also resolved now? I would expect it came up during testing... Edited May 4, 2018 by Drew Kerman Quote Link to comment Share on other sites More sharing options...
ThiccRocketScientist Posted May 4, 2018 Share Posted May 4, 2018 (edited) On 4/27/2018 at 5:26 PM, Papa_Joe said: I will need more info to be able to help you. I've tested this in a clean install and in a heavily modded install with no issues. So, if you can provide more detail, a log file, and steps to reliably reproduce the error I will be able to help you. Basically the green circle appears, said vehicle is loaded, and then is thrown below the surface at exceedingly high speeds, and instantly is completely annihilated several kilometers below the surface. This happens more with one vehicle than others, and also, at certain points and I don't know why to either of them. Mods, log and some screenshots of the dilemma. Note this also usually happens with my tanks, not planes, which have many wheels and panels. https://imgur.com/qLqxdLn https://imgur.com/a/lINTFfq Edited May 10, 2018 by ThiccRocketScientist Quote Link to comment Share on other sites More sharing options...
Papa_Joe Posted May 8, 2018 Author Share Posted May 8, 2018 On 5/4/2018 at 1:00 PM, ThiccRocketScientist said: Basically the green circle appears, said vehicle is loaded, and then is thrown below the surface at exceedingly high speeds, and instantly is completely annihilated several kilometers below the surface. This happens more with one vehicle than others, and also, at certain points and I don't know why to either of them. Mods, log and some screenshots of the dilemma. Note this also usually happens with my tanks, not planes, which have many wheels and panels. https://imgur.com/qLqxdLn https://imgur.com/a/lINTFfq ... hmm... there have been reports of this in the past. difficult to understand. Question: Is the root part not the crew pod? Are you adding crew or spawning without crew? These are the things I mean by steps to reproduce. Note: I appreciate the log, but posting it in clear text in your post is bad. it causes the forum page to be difficult to load for many folks. If you could be so kind as to remove the full text and provide a link that would be the preferred way to post a log. You can try rerooting the vessel. See if that makes a difference. also let me know the steps to spawn that you used. different code paths are used for different options, so it matters. Quote Link to comment Share on other sites More sharing options...
Papa_Joe Posted May 14, 2018 Author Share Posted May 14, 2018 (edited) On 5/3/2018 at 5:32 PM, Drew Kerman said: So I'm still on v1.3.1 but seeing this was exciting because it's an annoying limitation I'm stuck with that I look forward to not having to deal with anymore when I upgrade. However I also just remembered that I filed this bug report a while ago and it's currently unsolved but was directly related to this feature. So is this issue also resolved now? I would expect it came up during testing... This has not yet been addressed. I've reviewed the code and have determine that some changes to the Movement Mode switch while changing altitude settings are needed. Originally, the ability to change altitude did not exist, so the mode changes were not affected by current altitude, since it was always at a preset value. Now a means to ensure the altitude does not change is needed to allow for precise altitude positioning by the user. Further a means to reset the mode switch so that it reverts to automatically placing the craft at a preset altitude. So, I'm working on the following: 1. If the Movement Mode (Tab key) is pressed when the user has not yet made any changes to the altitude, the mode switch will also alter the altitude to one of the preset settings. 2. If the user changes the altitude, then the mode switch will not change the altitude. This will allow you to precisely set your altitude quickly and easily. 3. If the user wishes to reset the behavior to (1) above, then an additional Reset key can be pressed to reset the altitude. 4. Add a check for water to ensure that behavior is consistent over land (no underground) and water (submerged is possible). Update: I have the revised behavior in place. Now, the altitude controls are more intuitive. I now use Throttle Off (X by default) to reset the Movement mode Altitude, and lose all altitude changes. New Release coming soon. Edited May 14, 2018 by Papa_Joe Update status Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.