Jump to content

[1.8.1] Kerbal Konstructs - 1.8.1.15 - 15.Dec.2019

Ger_space

By Ger_space
in KSP1 Mod Releases

 Share

Recommended Posts

OrbitalManeuvers

OrbitalManeuvers

Posted
Posted
18 minutes ago, Caerfinon said:
  1. Take a copy of the instance file after you change it  and save it, and another after it reverts and and compare the two files to note what the changes are.
  2. Also you should be aware that JNSQ has a patch file called DefaultColor.cfg in folder \Kerbal Space Program\GameData\JNSQ\JNSQ_Configs\KK  that changes color presets.

See if the altered values from #1 match with what #2 is doing.  If it is, maybe some advice from the JNSQ team on how to resolve.

So I have two pads out, both behave the same. I started KSP, colors are wrong, so I saved off all the files in the NewInstances folder. Then back in game I fixed the color, and, just in case a grass color change doesn't mark the settings dirty, I also bumped the position of both pads just a click. Then saved everything, and here's a compare of one. The other is the same.

tldr; maybe grass color changes aren't getting written to the cfg?

Spoiler

SiuTB22.png

 

Link to comment
Share on other sites
Caerfinon

Caerfinon

Posted
Posted
11 minutes ago, OrbitalManeuvers said:

tldr; maybe grass color changes aren't getting written to the cfg?

The number values in both files are the JNSQ default presets.

When you make the changes in the instance to the grass do you close and save from the instance edit dialog or from the larger KK menu dialog? 

Link to comment
Share on other sites
OrbitalManeuvers

OrbitalManeuvers

Posted
Posted
2 minutes ago, Caerfinon said:

When you make the changes in the instance to the grass do you close and save from the instance edit dialog or from the larger KK menu dialog? 

Always both, due to paranoia and not looking at the code. I always save from the instance editor with Save and Close, then the main dlg with Save (which seems to sometimes be highlighted and sometimes not?). But yeah always both.

Link to comment
Share on other sites
ColdJ

ColdJ

Posted
Posted
47 minutes ago, Caerfinon said:

See if the altered values from #1 match with what #2 is doing.  If it is, maybe some advice from the JNSQ team on how to resolve.

This happens to me in standard KSP. I have a level 1 runway on the south pole ice sheet. I have the grass colour set to snow/ice and regularly it resets to green grass. I have just been living with it and reseting it when I am out that way.

4 minutes ago, OrbitalManeuvers said:

Always both, due to paranoia and not looking at the code. I always save from the instance editor with Save and Close, then the main dlg with Save (which seems to sometimes be highlighted and sometimes not?). But yeah always both.

I always save in all save places individual and full interface and it still happens.

Link to comment
Share on other sites
Caerfinon

Caerfinon

Posted
Posted
1 hour ago, OrbitalManeuvers said:

But yeah always both.

 

1 hour ago, ColdJ said:

I always save in all save places individual and full interface and it still happens.

Well that's just strange.  I haven't had it happen to me yet.

I do paranoid saving as well, The only difference I can think of is that I move all of my creations out of the default new instances folder into folders that are very specific to the mod I'm working on, or to my private collection of KK statics. I never leave them under the KK directories (also a kind of paranoia). 

 

Link to comment
Share on other sites
ColdJ

ColdJ

Posted
Posted
45 minutes ago, Caerfinon said:

I never leave them under the KK directories

That is probably the trick. Also when I create new instances I have to reopen all the bases again. Good thing in sandbox it is free.

Link to comment
Share on other sites
Caerfinon

Caerfinon

Posted
Posted
4 minutes ago, ColdJ said:

sandbox it is free

I cheat there... I set all bases open by default in career games. I just like to fly there or launch from them. I don't really care about the facilities for making science or money I prefer to do that through field work. 

Link to comment
Share on other sites
ElonsMusk

ElonsMusk

Posted
Posted
21 minutes ago, Jebediah Kerman 13 said:

Does it require any other mod to work because I tried to use the mod in ksp 1.10 and it kind of work. I don't know how to edit and spawn the buildings.

When you are in 'flight' you press Control+K to bring up the K&K statics menu. From there, you can edit groups, spawn new instances, and adjust local instances.

Link to comment
Share on other sites
Caerfinon

Caerfinon

Posted
Posted
23 minutes ago, Jebediah Kerman 13 said:

I don't know how to edit and spawn the buildings.

I just completed a wiki you might find useful: Getting Started With Kerbal Konstructs

You don't *need* additional mods, however there are many useful mods that add additional parts and structures to use in Kerbal Konstructs;
Omega's Stockalike Structures
Tundra's Space Center
Kerbin Side Remastered

Link to comment
Share on other sites
Caerfinon

Caerfinon

Posted
Posted (edited)
2 hours ago, Jebediah Kerman 13 said:

i see some part pink like the ground when I spawn the VAB

Can you post a picture of this? 

(you must have the image hosted on a service like imgur.com and the URL needs to have an extension of .png or .jpg)

Can you also post the configuration file for the instance that is showing up pink?

Edited by Caerfinon
Link to comment
Share on other sites
ColdJ

ColdJ

Posted
Posted
9 minutes ago, Caerfinon said:

Can you post a picture of this? 

(you must have the image hosted on a service like imgur.com and the URL needs to have an extension of .png or .jpg)
 

Just realised if he means the grass colour on the hex base, I have had that happen too when I put a version of a VAB in my volcano base.

Link to comment
Share on other sites
Caerfinon

Caerfinon

Posted
Posted
4 minutes ago, ColdJ said:

Just realised if he means the grass colour on the hex base, I have had that happen too

is the colour preset just off? Can you change it in the instance editor? Or is it a texture related thing (i.e. pink) 

Link to comment
Share on other sites
ColdJ

ColdJ

Posted
Posted (edited)
3 minutes ago, Caerfinon said:

is the colour preset just off? Can you change it in the instance editor? Or is it a texture related thing (i.e. pink) 

Could never seem to change the colour, just lightness/darkness. So black I guess was an option. Yes the main colour was Pink.

Edited by ColdJ
Link to comment
Share on other sites
Hotel26

Hotel26

Posted
Posted (edited)

tl;dr I have installed KK six times and de-installed it a similar number times (6) within 30m.  That's my track record.

I contacted SIr @Caerfinon, O.K.E., yesterday, seeking professional help.  With his help, I have been able to load KK & Kerbinside Remastered.  I have long suspected KK doesn't work (well) on Linux.

The problem (extracted from the full log) is:

Quote

[EXC 18:08:04.818] DirectoryNotFoundException: Could not find a part of the path "/home/kmk/GameData/KerbalKonstructs/MapDecalMaps/AllBlack.png".

I am using an app launcher located in /home/kmk/Desktop to run KSP 1.11.2 -- which is located in /home/kmk/env/games/KSP/1.11.2.3077/

In consultation with Sir Caerfinon (yes, he just received his Knighthood via express email!), I executed a quick work-around, et voila, KK works (so far) on Linux.

By the way, please check out Sir Caerfinon's new and thoroughly excellently helpful link: Getting Started With Kerbal Konstructs ...  How good is that?!

                                                                          

Anyway, I am posting the full log as a bug report and suggesting that a relative path, from the KK DLL, be used to locate its own assets.,  The .NET AppContext.BaseDirectory appears to be the most appropriate way to locate the starting point.

                                                                          

Lucky Installation Number 7!  Thank you, Caerfinon!  Much indebted to you.

Edited by Hotel26
Link to comment
Share on other sites
Caerfinon

Caerfinon

Posted
Posted
18 minutes ago, Jamma368 said:

every time i make a airport and save and go back to the ksc its not there and i cant  spawn there

Is the entire airport missing or just the ability to launch from the SPH/VAB?  Are you setting the runway as a launch site? 

Link to comment
Share on other sites
This thread is quite old. Please consider starting a new thread rather than reviving this one.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing
×
×
  • Create New...